*ident	"@(#)system	1.18	97/06/27 SMI" /* SVR4 1.5 */
*
* SYSTEM SPECIFICATION FILE
*

* moddir:
*
*	Set the search path for modules.  This has a format similar to the
*	csh path variable. If the module isn't found in the first directory
*	it tries the second and so on. The default is /kernel /usr/kernel
*
*	Example:
*		moddir: /kernel /usr/kernel /other/modules



* root device and root filesystem configuration:
*
*	The following may be used to override the defaults provided by
*	the boot program:
*
*	rootfs:		Set the filesystem type of the root.
*
*	rootdev:	Set the root device.  This should be a fully
*			expanded physical pathname.  The default is the
*			physical pathname of the device where the boot
*			program resides.  The physical pathname is
*			highly platform and configuration dependent.
*
*	Example:
*		rootfs:ufs
*		rootdev:/sbus@1,f8000000/esp@0,800000/sd@3,0:a
*
*	(Swap device configuration should be specified in /etc/vfstab.)



* exclude:
*
*	Modules appearing in the moddir path which are NOT to be loaded,
*	even if referenced. Note that `exclude' accepts either a module name,
*	or a filename which includes the directory.
*
*	Examples:
*		exclude: win
*		exclude: sys/shmsys



* forceload:
*
*	Cause these modules to be loaded at boot time, (just before mounting
*	the root filesystem) rather than at first reference. Note that
* 	forceload expects a filename which includes the directory. Also
*	note that loading a module does not necessarily imply that it will
*	be installed.
*
*	Example:
*		forceload: drv/foo



* set:
*
*	Set an integer variable in the kernel or a module to a new value.
*	This facility should be used with caution.  See system(4).
*
*	Examples:
*
*	To set variables in 'unix':
*
*		set nautopush=32
*		set maxusers=40
*
*	To set a variable named 'debug' in the module named 'test_module'
*
*		set test_module:debug = 0x13


* vxfs_START -- do not remove the following lines:
* VxFS requires a stack size greater than the default 8K.
* The following value allows the kernel stack size to be
* increased to 24K for Solaris 7, 8 and 9, and 16K for Solaris 2.6.
set lwp_default_stksize=0x6000
* vxfs_END


* vxfs_START -- do not remove the following lines:
* VxFS requires a stack size greater than the default 8K.
* The following value allows the kernel stack size to be
* increased to 24K for Solaris 7, 8 and 9, and 16K for Solaris 2.6.
set rpcmod:svc_default_stksize=0x6000
* vxfs_END

* vxvm_START (do not remove)
forceload: drv/vxdmp
forceload: drv/vxio
forceload: drv/vxspec
forceload: drv/dad
forceload: drv/sd
forceload: drv/lpfc
forceload: drv/ssd
*rootdev:/pseudo/vxio@0:0
*set vxio:vol_rootdev_is_volume=1
rootdev:/pseudo/vxio@0:0
set vxio:vol_rootdev_is_volume=1
* vxvm_END (do not remove)

* The forceload of drv/clone is required for successful 
* IP operation of EMULEX fibre channel drivers lpfc / lpfs
* and for the diagnostics (dfc) interface.
forceload: drv/clone


set shmsys:shminfo_shmmax=4294967295
set shmsys:shminfo_shmseg=1024
set semsys:seminfo_semmap=1026
set semsys:seminfo_semmni=2048
set semsys:seminfo_semmns=16384
set semsys:seminfo_semmnu=16384
set semsys:seminfo_semmsl=512
set semsys:seminfo_semume=256
set shmsys:shminfo_shmmin=1
set shmsys:shminfo_semopm=100
set shmsys:shminfo_semvmx=32767
set msgsys:msginfo_msgmax = 95535
set msgsys:msginfo_msgmnb = 95535
set msgsys:msginfo_msgssz  = 128
set msgsys:msginfo_msgmni  = 8392
set msgsys:msginfo_msgtql  = 160
set msgsys:msginfo_msgseg = 32768
set msgsys:msginfo_msgmap = 1026
set semsys:seminfo_semaem = 16384
set shmsys:shminfo_shmmni = 1024
set semsys:seminfo_semopm=128 
set rlim_fd_cur=10240
set rlim_fd_max=10240

*** disk requirement by EMC
set sd:sd_max_throttle=20
set scsi_options=0x7f8
set sd:sd_io_time=0x3c




*Start of lines added by package SCfix1. DO NOT MODIFY.
* Accept nfs connections from privileged ports only
set nfssrv:nfs_portmon=1
* Buffer overrun protection (32 bit).
set noexec_user_stack=1
set noexec_user_stack_log=1
*End of lines added by package SCfix1. DO NOT MODIFY.

* vxfs_START -- do not remove the following lines:
* VxFS requires a stack size greater than the default 8K.
* The following value allows the kernel stack size to be
* increased to 24K for Solaris 7, 8 and 9, and 16K for Solaris 2.6.
set lwp_default_stksize=0x6000
* vxfs_END


* vxfs_START -- do not remove the following lines:
* VxFS requires a stack size greater than the default 8K.
* The following value allows the kernel stack size to be
* increased to 24K for Solaris 7, 8 and 9, and 16K for Solaris 2.6.
set rpcmod:svc_default_stksize=0x6000
* vxfs_END

* Enable fix from 108528-29 for bug 4468181
set TS:ts_sleep_promote=1
