

Buffer Type: SXP Trace
Buffer Id: 0
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 49th at 17:03:03.
00:00:00:01:265 EMC: Setting Update lock: 1
00:00:00:01:399 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:420 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:440 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:460 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:482 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:502 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:507 EMC: Failed to get Power Supply revision info.
00:00:00:01:514 EMC: SXP FW Version:   04.05
00:00:00:01:518 EMC: SXP BOOT Version: 03.00
00:00:00:01:522 EMC: SXP ISTR Version: 03.05
00:00:00:01:526 EMC: MC Version:       16.01
00:00:00:01:531 EMC: DLMC Version:     14.47
00:00:00:01:535 EMC: PS Version:       00.01
00:00:00:01:539 EMC: CPLD Version:     00.09
00:00:00:01:543 EMC: Base SAS Address: 50060480_00b680c0
00:00:00:01:548 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:557 EMC: Exception flag read from register is 0
00:00:00:00:985 EMC: Setting enclosure number to 255
00:00:00:01:005 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:01:026 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:049 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:069 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:090 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:112 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:119 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:142 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:165 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:185 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:239 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:259 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:265 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:287 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:308 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:330 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:350 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:370 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:375 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:383 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:01:389 EMC: Checking for updated FW!
00:00:00:01:393 EMC: Checking for SXP FW download
00:00:00:01:420 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:01:435 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:01:440 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:15:669 WDG EXPIRED: Elapsed time since last WDG run: 799 ms
00:00:00:15:674 WDG: Pong not received from: EMA
                                              

Buffer Type: SXP Trace
Buffer Id: 1
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 946
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:15.7
00:00:00:01:264 EMC: Setting Update lock: 1
00:00:00:01:350 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:384 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:404 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:424 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:445 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:467 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:472 EMC: Failed to get Power Supply revision info.
00:00:00:01:478 EMC: SXP FW Version:   04.05
00:00:00:01:483 EMC: SXP BOOT Version: 03.00
00:00:00:01:487 EMC: SXP ISTR Version: 03.05
00:00:00:01:491 EMC: MC Version:       16.01
00:00:00:01:497 EMC: DLMC Version:     14.47
00:00:00:01:501 EMC: PS Version:       00.01
00:00:00:01:505 EMC: CPLD Version:     00.13
00:00:00:15:768 WDG EXPIRED: Elapsed time since last WDG run: 229 ms
00:00:00:15:773 WDG: Pong not received from: EMA
                 

Buffer Type: SXP Trace
Buffer Id: 2
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:51.
00:00:00:01:263 EMC: Setting Update lock: 1
00:00:00:01:349 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:382 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:402 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:423 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:443 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:465 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:470 EMC: Failed to get Power Supply revision info.
00:00:00:01:476 EMC: SXP FW Version:   04.05
00:00:00:01:481 EMC: SXP BOOT Version: 03.00
00:00:00:01:485 EMC: SXP ISTR Version: 03.05
00:00:00:01:489 EMC: MC Version:       16.01
00:00:00:01:493 EMC: DLMC Version:     14.47
00:00:00:01:498 EMC: PS Version:       00.01
00:00:00:01:502 EMC: CPLD Version:     00.13
00:00:00:01:506 EMC: Base SAS Address: 50060480_00fa80c0
00:00:00:01:510 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:520 EMC: Exception flag read from register is 1
00:00:00:36:984 EMC: Setting enclosure number to 255
00:00:00:37:003 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:37:046 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:068 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:089 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:109 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:130 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:136 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:160 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:183 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:204 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:225 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:269 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:274 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:298 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:321 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:342 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:363 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:385 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:390 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:397 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:37:404 EMC: Checking for updated FW!
00:00:00:37:408 EMC: Checking for SXP FW download
00:00:00:37:436 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:37:451 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:37:456 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:51:683 WDG EXPIRED: Elapsed time since last WDG run: 792 ms
00:00:00:51:688 WDG: Pong not received from: EMA
                                              

Buffer Type: Expander Ring Buffer Trace
Buffer Id: 255
Source: Manual
SXP Major Rev: 04
SXP Minor Rev: 30
Length: -1
Timestamp: 08/06/2010 10:30:35
        
06:09:24:01.415 EMC: ...read processing took 0 ms, status=Success
06:09:24:02.069 EMC: Setting state change bit.
06:09:24:02.349 EMC: Upstream wide port: DISCONNECTED.
06:09:24:02.370 EMC: Setting upstream connectivity LED to OFF because no upstream connection either side!
06:09:24:02.381 EMC: Expander requesting Upstream Conn LED change from ON to OFF
06:09:24:02.409 EMC: UPSTREAM PORT status going from CONNECTED to UNCONNECTED
06:09:24:02.422 EMC: Detected peer upstream addr chg 50060489_703ecabf to NONE.
06:09:24:02.429 EMC: LED updater changing Upstream Conn LED from ON to OFF
06:09:24:02.439 EMC: Writing LED command to MC: "L55955555"
06:09:24:02.508 EMC: Sending changed local info to peer.
06:09:24:03.408 EMC: ...read processing took 0 ms, status=Success
06:09:24:04.346 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
06:09:24:04.352 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
06:09:24:04.361 Setting CPLD activity LED mode to OR because both sides not being polled.
06:09:24:04.370 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:09:24:04.393 EMC: DISPLAY command success, encl number=01, mode=C.
06:09:24:04.436 EMC: Other READ PAGE change detected.
06:09:24:04.441 EMC: Sending changed local info to peer.
06:09:24:05.357 EMC: Flare polling state change: self FAILED to FAILED, peer YES to FAILED
06:09:24:05.381 EMC: DISPLAY command success, encl number=01, mode=C.
06:09:24:05.386 EMC: ...read processing took 30 ms, status=Success
06:09:24:16.261 EMC: ...read processing took 0 ms, status=Success
06:09:24:27.110 EMC: ...read processing took 0 ms, status=Success
06:09:56:23.993 EMC: Setting upstream connectivity LED to FLASH because peer upstream connected but not me!
06:09:56:24.003 EMC: Expander requesting Upstream Conn LED change from OFF to FLASH
06:09:56:24.010 EMC: Expander requesting Encl LED change from OFF to ON
06:09:56:24.036 EMC: Detected peer upstream addr chg NONE to 50060489_703ecabf.
06:09:56:24.042 EMC: LED updater changing Upstream Conn LED from OFF to FLASH
06:09:56:24.051 EMC: Writing LED command to MC: "L55B95555"
06:09:56:24.120 EMC: Sending changed local info to peer.
06:09:56:24.571 EMC: ...read processing took 1 ms, status=Success
06:09:56:25.719 EMC: Other READ PAGE change detected.
06:09:56:27.305 EMC: Flare polling state change: self FAILED to FAILED, peer FAILED to YES
06:09:56:27.329 EMC: DISPLAY command success, encl number=01, mode=C.
06:10:18:27.236 EMC: Upstream cable phy 0 status going from NOT READY to READY
06:10:18:27.242 EMC: Upstream cable phy 1 status going from NOT READY to READY
06:10:18:27.250 EMC: Upstream cable phy 2 status going from NOT READY to READY
06:10:18:27.257 EMC: Upstream cable phy 3 status going from NOT READY to READY
06:10:18:27.265 EMC: Detected upstream addr chg NONE to 50060489_703ecaff.
06:10:18:27.272 EMC: Sending changed local info to peer.
06:10:18:28.221 EMC: Upstream wide port: CONNECTED.
06:10:18:28.243 EMC: Setting upstream connectivity LED to ON because upstream connection found.
06:10:18:28.251 EMC: Expander requesting Upstream Conn LED change from FLASH to ON
06:10:18:28.258 EMC: Expander requesting Encl LED change from ON to OFF
06:10:18:28.286 EMC: UPSTREAM PORT status going from UNCONNECTED to CONNECTED
06:10:18:28.293 EMC: LED updater changing Upstream Conn LED from FLASH to ON
06:10:18:28.301 EMC: Writing LED command to MC: "L55A55555"
06:10:18:28.370 EMC: Sending changed local info to peer.
06:10:18:29.037 EMC: Other READ PAGE change detected.
06:10:18:30.999 EMC: Flare polling state turned off because bad gen number 0x5b05 received; expected 0xcb06.
06:10:18:31.008 EMC: Flare polling state change: self FAILED to NO, peer YES to YES
06:10:18:31.032 EMC: DISPLAY command success, encl number=01, mode=C.
06:10:18:31.100 EMC: Resynchronizing to Flare time: 555549062 ms; timestamp adjusted to: 0 ms.
06:10:19:09.088 EMC: Clearing state change bit.
06:10:19:09.095 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:19:09.109 EMC: Setting enclosure number to 1
06:10:19:09.131 EMC: DISPLAY command success, encl number=01, mode=C.
06:10:19:09.136 EMC: Flare assigns this enclosure number = 1, generation number = 0x5b05
06:10:19:09.143 EMC: Flare polling state change: self NO to YES, peer YES to YES
06:10:19:09.152 Setting CPLD activity LED mode to AND because both sides being polled.
06:10:19:09.159 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:19:09.182 EMC: DISPLAY command success, encl number=01, mode=4.
06:10:19:09.394 EMC: Sending changed local info to peer.
06:10:19:12.609 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:19:14.812 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:19:17.033 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:19:19.234 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:19:21.609 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:22:08.393 EMC: Detected peer upstream addr chg 50060489_703ecabf to NONE.
06:10:22:08.399 EMC: Setting state change bit.
06:10:22:09.453 EMC: Clearing state change bit.
06:10:22:09.457 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:22:09.468 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:22:09.821 EMC: Other READ PAGE change detected.
06:10:22:09.825 EMC: Setting state change bit.
06:10:22:11.366 EMC: Detected peer upstream addr chg NONE to 50060489_703ecabf.
06:10:22:11.998 EMC: Other READ PAGE change detected.
06:10:22:12.750 EMC: Clearing state change bit.
06:10:22:12.754 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:22:12.812 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:22:13.206 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
06:10:22:13.218 EMC: DISPLAY command success, encl number=01, mode=4.
06:10:22:13.224 EMC: ...read processing took 20 ms, status=Success
06:10:22:13.874 EMC: Setting state change bit.
06:10:22:14.212 Setting CPLD activity LED mode to OR because both sides not being polled.
06:10:22:16.031 EMC: Clearing state change bit.
06:10:22:16.035 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:22:16.093 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:22:57.082 EMC: Flare polling state change: self YES to YES, peer FAILED to NO
06:10:22:57.094 EMC: DISPLAY command success, encl number=01, mode=4.
06:10:22:57.101 EMC: ...read processing took 20 ms, status=Success
06:10:22:58.397 EMC: Upstream cable phy 0 status going from READY to NOT READY
06:10:22:58.403 EMC: Upstream cable phy 1 status going from READY to NOT READY
06:10:22:58.410 EMC: Upstream cable phy 2 status going from READY to NOT READY
06:10:22:58.416 EMC: Upstream cable phy 3 status going from READY to NOT READY
06:10:22:58.424 EMC: Detected upstream addr chg 50060489_703ecaff to NONE.
06:10:22:58.431 EMC: Sending changed local info to peer.
06:10:22:59.083 EMC: Setting state change bit.
06:10:22:59.375 EMC: Upstream wide port: DISCONNECTED.
06:10:22:59.397 EMC: Setting upstream connectivity LED to FLASH because peer upstream connected but not me!
06:10:22:59.407 EMC: Expander requesting Upstream Conn LED change from ON to FLASH
06:10:22:59.414 EMC: Expander requesting Encl LED change from OFF to ON
06:10:22:59.442 EMC: UPSTREAM PORT status going from CONNECTED to UNCONNECTED
06:10:22:59.449 EMC: LED updater changing Upstream Conn LED from ON to FLASH
06:10:22:59.457 EMC: Writing LED command to MC: "L55B95555"
06:10:22:59.526 EMC: Sending changed local info to peer.
06:10:23:00.462 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
06:10:23:00.468 EMC: Flare polling state change: self YES to FAILED, peer NO to NO
06:10:23:00.476 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:23:00.499 EMC: DISPLAY command success, encl number=01, mode=C.
06:10:23:00.544 EMC: Other READ PAGE change detected.
06:10:23:00.548 EMC: Sending changed local info to peer.
06:10:23:01.533 EMC: Upstream cable phy 0 status going from NOT READY to READY
06:10:23:01.539 EMC: Upstream cable phy 1 status going from NOT READY to READY
06:10:23:01.547 EMC: Upstream cable phy 2 status going from NOT READY to READY
06:10:23:01.554 EMC: Upstream cable phy 3 status going from NOT READY to READY
06:10:23:01.562 EMC: Detected upstream addr chg NONE to 50060489_703ecaff.
06:10:23:01.569 EMC: Sending changed local info to peer.
06:10:23:02.510 EMC: Upstream wide port: CONNECTED.
06:10:23:02.532 EMC: Setting upstream connectivity LED to ON because upstream connection found.
06:10:23:02.540 EMC: Expander requesting Upstream Conn LED change from FLASH to ON
06:10:23:02.548 EMC: Expander requesting Encl LED change from ON to OFF
06:10:23:02.576 EMC: UPSTREAM PORT status going from UNCONNECTED to CONNECTED
06:10:23:02.583 EMC: LED updater changing Upstream Conn LED from FLASH to ON
06:10:23:02.589 EMC: Writing LED command to MC: "L55A55555"
06:10:23:02.660 EMC: Sending changed local info to peer.
06:10:23:03.636 EMC: Other READ PAGE change detected.
06:10:23:46.869 EMC: Flare polling state turned off because bad gen number 0xfe18 received; expected 0x5b05.
06:10:23:46.878 EMC: Flare polling state change: self FAILED to NO, peer NO to NO
06:10:23:46.891 EMC: DISPLAY command success, encl number=01, mode=C.
06:10:23:47.113 EMC: Sending changed local info to peer.
06:10:24:17.784 EMC: Flare polling state change: self NO to NO, peer NO to YES
06:10:24:17.808 EMC: DISPLAY command success, encl number=01, mode=C.
06:10:24:57.046 EMC: Clearing state change bit.
06:10:24:57.052 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:24:57.062 EMC: Setting enclosure number to 1
06:10:24:57.083 EMC: DISPLAY command success, encl number=01, mode=C.
06:10:24:57.088 EMC: Flare assigns this enclosure number = 1, generation number = 0x6106
06:10:24:57.095 EMC: Flare polling state change: self NO to YES, peer YES to YES
06:10:24:57.103 Setting CPLD activity LED mode to AND because both sides being polled.
06:10:24:57.110 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:24:57.134 EMC: DISPLAY command success, encl number=01, mode=4.
06:10:24:57.324 EMC: Sending changed local info to peer.
06:10:25:05.372 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
06:10:25:05.378 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
06:10:25:05.386 Setting CPLD activity LED mode to OR because both sides not being polled.
06:10:25:05.395 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:25:05.419 EMC: DISPLAY command success, encl number=01, mode=C.
06:10:25:05.462 EMC: Sending changed local info to peer.
06:10:25:05.777 EMC: Flare polling state restored because good generation number 0x6106 received.
06:10:25:05.785 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
06:10:25:05.793 Setting CPLD activity LED mode to AND because both sides being polled.
06:10:25:05.800 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:25:05.824 EMC: DISPLAY command success, encl number=01, mode=4.
06:10:25:06.408 EMC: Sending changed local info to peer.
06:10:25:18.125 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:25:20.437 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:25:22.921 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:25:25.421 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:25:27.734 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
                                                                                                                                                                 

Buffer Type: SXP Trace
Buffer Id: 0
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 49th at 17:03:03.
00:00:00:01:265 EMC: Setting Update lock: 1
00:00:00:01:399 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:420 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:440 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:460 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:482 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:502 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:507 EMC: Failed to get Power Supply revision info.
00:00:00:01:514 EMC: SXP FW Version:   04.05
00:00:00:01:518 EMC: SXP BOOT Version: 03.00
00:00:00:01:522 EMC: SXP ISTR Version: 03.05
00:00:00:01:526 EMC: MC Version:       16.01
00:00:00:01:531 EMC: DLMC Version:     14.47
00:00:00:01:535 EMC: PS Version:       00.01
00:00:00:01:539 EMC: CPLD Version:     00.09
00:00:00:01:543 EMC: Base SAS Address: 50060480_00b680c0
00:00:00:01:548 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:557 EMC: Exception flag read from register is 0
00:00:00:00:985 EMC: Setting enclosure number to 255
00:00:00:01:005 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:01:026 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:049 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:069 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:090 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:112 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:119 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:142 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:165 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:185 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:239 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:259 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:265 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:287 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:308 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:330 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:350 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:370 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:375 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:383 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:01:389 EMC: Checking for updated FW!
00:00:00:01:393 EMC: Checking for SXP FW download
00:00:00:01:420 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:01:435 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:01:440 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:15:669 WDG EXPIRED: Elapsed time since last WDG run: 799 ms
00:00:00:15:674 WDG: Pong not received from: EMA
                                              

Buffer Type: SXP Trace
Buffer Id: 1
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 946
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:15.7
00:00:00:01:264 EMC: Setting Update lock: 1
00:00:00:01:350 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:384 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:404 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:424 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:445 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:467 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:472 EMC: Failed to get Power Supply revision info.
00:00:00:01:478 EMC: SXP FW Version:   04.05
00:00:00:01:483 EMC: SXP BOOT Version: 03.00
00:00:00:01:487 EMC: SXP ISTR Version: 03.05
00:00:00:01:491 EMC: MC Version:       16.01
00:00:00:01:497 EMC: DLMC Version:     14.47
00:00:00:01:501 EMC: PS Version:       00.01
00:00:00:01:505 EMC: CPLD Version:     00.13
00:00:00:15:768 WDG EXPIRED: Elapsed time since last WDG run: 229 ms
00:00:00:15:773 WDG: Pong not received from: EMA
                 

Buffer Type: SXP Trace
Buffer Id: 2
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:51.
00:00:00:01:263 EMC: Setting Update lock: 1
00:00:00:01:349 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:382 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:402 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:423 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:443 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:465 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:470 EMC: Failed to get Power Supply revision info.
00:00:00:01:476 EMC: SXP FW Version:   04.05
00:00:00:01:481 EMC: SXP BOOT Version: 03.00
00:00:00:01:485 EMC: SXP ISTR Version: 03.05
00:00:00:01:489 EMC: MC Version:       16.01
00:00:00:01:493 EMC: DLMC Version:     14.47
00:00:00:01:498 EMC: PS Version:       00.01
00:00:00:01:502 EMC: CPLD Version:     00.13
00:00:00:01:506 EMC: Base SAS Address: 50060480_00fa80c0
00:00:00:01:510 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:520 EMC: Exception flag read from register is 1
00:00:00:36:984 EMC: Setting enclosure number to 255
00:00:00:37:003 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:37:046 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:068 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:089 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:109 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:130 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:136 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:160 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:183 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:204 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:225 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:269 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:274 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:298 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:321 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:342 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:363 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:385 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:390 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:397 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:37:404 EMC: Checking for updated FW!
00:00:00:37:408 EMC: Checking for SXP FW download
00:00:00:37:436 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:37:451 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:37:456 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:51:683 WDG EXPIRED: Elapsed time since last WDG run: 792 ms
00:00:00:51:688 WDG: Pong not received from: EMA
                                              

Buffer Type: Expander Ring Buffer Trace
Buffer Id: 255
Source: Manual
SXP Major Rev: 04
SXP Minor Rev: 30
Length: -1
Timestamp: 08/06/2010 10:36:14
        
06:09:24:04.352 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
06:09:24:04.361 Setting CPLD activity LED mode to OR because both sides not being polled.
06:09:24:04.370 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:09:24:04.393 EMC: DISPLAY command success, encl number=01, mode=C.
06:09:24:04.436 EMC: Other READ PAGE change detected.
06:09:24:04.441 EMC: Sending changed local info to peer.
06:09:24:05.357 EMC: Flare polling state change: self FAILED to FAILED, peer YES to FAILED
06:09:24:05.381 EMC: DISPLAY command success, encl number=01, mode=C.
06:09:24:05.386 EMC: ...read processing took 30 ms, status=Success
06:09:24:16.261 EMC: ...read processing took 0 ms, status=Success
06:09:24:27.110 EMC: ...read processing took 0 ms, status=Success
06:09:56:23.993 EMC: Setting upstream connectivity LED to FLASH because peer upstream connected but not me!
06:09:56:24.003 EMC: Expander requesting Upstream Conn LED change from OFF to FLASH
06:09:56:24.010 EMC: Expander requesting Encl LED change from OFF to ON
06:09:56:24.036 EMC: Detected peer upstream addr chg NONE to 50060489_703ecabf.
06:09:56:24.042 EMC: LED updater changing Upstream Conn LED from OFF to FLASH
06:09:56:24.051 EMC: Writing LED command to MC: "L55B95555"
06:09:56:24.120 EMC: Sending changed local info to peer.
06:09:56:24.571 EMC: ...read processing took 1 ms, status=Success
06:09:56:25.719 EMC: Other READ PAGE change detected.
06:09:56:27.305 EMC: Flare polling state change: self FAILED to FAILED, peer FAILED to YES
06:09:56:27.329 EMC: DISPLAY command success, encl number=01, mode=C.
06:10:18:27.236 EMC: Upstream cable phy 0 status going from NOT READY to READY
06:10:18:27.242 EMC: Upstream cable phy 1 status going from NOT READY to READY
06:10:18:27.250 EMC: Upstream cable phy 2 status going from NOT READY to READY
06:10:18:27.257 EMC: Upstream cable phy 3 status going from NOT READY to READY
06:10:18:27.265 EMC: Detected upstream addr chg NONE to 50060489_703ecaff.
06:10:18:27.272 EMC: Sending changed local info to peer.
06:10:18:28.221 EMC: Upstream wide port: CONNECTED.
06:10:18:28.243 EMC: Setting upstream connectivity LED to ON because upstream connection found.
06:10:18:28.251 EMC: Expander requesting Upstream Conn LED change from FLASH to ON
06:10:18:28.258 EMC: Expander requesting Encl LED change from ON to OFF
06:10:18:28.286 EMC: UPSTREAM PORT status going from UNCONNECTED to CONNECTED
06:10:18:28.293 EMC: LED updater changing Upstream Conn LED from FLASH to ON
06:10:18:28.301 EMC: Writing LED command to MC: "L55A55555"
06:10:18:28.370 EMC: Sending changed local info to peer.
06:10:18:29.037 EMC: Other READ PAGE change detected.
06:10:18:30.999 EMC: Flare polling state turned off because bad gen number 0x5b05 received; expected 0xcb06.
06:10:18:31.008 EMC: Flare polling state change: self FAILED to NO, peer YES to YES
06:10:18:31.032 EMC: DISPLAY command success, encl number=01, mode=C.
06:10:18:31.100 EMC: Resynchronizing to Flare time: 555549062 ms; timestamp adjusted to: 0 ms.
06:10:19:09.088 EMC: Clearing state change bit.
06:10:19:09.095 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:19:09.109 EMC: Setting enclosure number to 1
06:10:19:09.131 EMC: DISPLAY command success, encl number=01, mode=C.
06:10:19:09.136 EMC: Flare assigns this enclosure number = 1, generation number = 0x5b05
06:10:19:09.143 EMC: Flare polling state change: self NO to YES, peer YES to YES
06:10:19:09.152 Setting CPLD activity LED mode to AND because both sides being polled.
06:10:19:09.159 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:19:09.182 EMC: DISPLAY command success, encl number=01, mode=4.
06:10:19:09.394 EMC: Sending changed local info to peer.
06:10:19:12.609 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:19:14.812 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:19:17.033 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:19:19.234 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:19:21.609 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:22:08.393 EMC: Detected peer upstream addr chg 50060489_703ecabf to NONE.
06:10:22:08.399 EMC: Setting state change bit.
06:10:22:09.453 EMC: Clearing state change bit.
06:10:22:09.457 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:22:09.468 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:22:09.821 EMC: Other READ PAGE change detected.
06:10:22:09.825 EMC: Setting state change bit.
06:10:22:11.366 EMC: Detected peer upstream addr chg NONE to 50060489_703ecabf.
06:10:22:11.998 EMC: Other READ PAGE change detected.
06:10:22:12.750 EMC: Clearing state change bit.
06:10:22:12.754 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:22:12.812 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:22:13.206 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
06:10:22:13.218 EMC: DISPLAY command success, encl number=01, mode=4.
06:10:22:13.224 EMC: ...read processing took 20 ms, status=Success
06:10:22:13.874 EMC: Setting state change bit.
06:10:22:14.212 Setting CPLD activity LED mode to OR because both sides not being polled.
06:10:22:16.031 EMC: Clearing state change bit.
06:10:22:16.035 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:22:16.093 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:22:57.082 EMC: Flare polling state change: self YES to YES, peer FAILED to NO
06:10:22:57.094 EMC: DISPLAY command success, encl number=01, mode=4.
06:10:22:57.101 EMC: ...read processing took 20 ms, status=Success
06:10:22:58.397 EMC: Upstream cable phy 0 status going from READY to NOT READY
06:10:22:58.403 EMC: Upstream cable phy 1 status going from READY to NOT READY
06:10:22:58.410 EMC: Upstream cable phy 2 status going from READY to NOT READY
06:10:22:58.416 EMC: Upstream cable phy 3 status going from READY to NOT READY
06:10:22:58.424 EMC: Detected upstream addr chg 50060489_703ecaff to NONE.
06:10:22:58.431 EMC: Sending changed local info to peer.
06:10:22:59.083 EMC: Setting state change bit.
06:10:22:59.375 EMC: Upstream wide port: DISCONNECTED.
06:10:22:59.397 EMC: Setting upstream connectivity LED to FLASH because peer upstream connected but not me!
06:10:22:59.407 EMC: Expander requesting Upstream Conn LED change from ON to FLASH
06:10:22:59.414 EMC: Expander requesting Encl LED change from OFF to ON
06:10:22:59.442 EMC: UPSTREAM PORT status going from CONNECTED to UNCONNECTED
06:10:22:59.449 EMC: LED updater changing Upstream Conn LED from ON to FLASH
06:10:22:59.457 EMC: Writing LED command to MC: "L55B95555"
06:10:22:59.526 EMC: Sending changed local info to peer.
06:10:23:00.462 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
06:10:23:00.468 EMC: Flare polling state change: self YES to FAILED, peer NO to NO
06:10:23:00.476 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:23:00.499 EMC: DISPLAY command success, encl number=01, mode=C.
06:10:23:00.544 EMC: Other READ PAGE change detected.
06:10:23:00.548 EMC: Sending changed local info to peer.
06:10:23:01.533 EMC: Upstream cable phy 0 status going from NOT READY to READY
06:10:23:01.539 EMC: Upstream cable phy 1 status going from NOT READY to READY
06:10:23:01.547 EMC: Upstream cable phy 2 status going from NOT READY to READY
06:10:23:01.554 EMC: Upstream cable phy 3 status going from NOT READY to READY
06:10:23:01.562 EMC: Detected upstream addr chg NONE to 50060489_703ecaff.
06:10:23:01.569 EMC: Sending changed local info to peer.
06:10:23:02.510 EMC: Upstream wide port: CONNECTED.
06:10:23:02.532 EMC: Setting upstream connectivity LED to ON because upstream connection found.
06:10:23:02.540 EMC: Expander requesting Upstream Conn LED change from FLASH to ON
06:10:23:02.548 EMC: Expander requesting Encl LED change from ON to OFF
06:10:23:02.576 EMC: UPSTREAM PORT status going from UNCONNECTED to CONNECTED
06:10:23:02.583 EMC: LED updater changing Upstream Conn LED from FLASH to ON
06:10:23:02.589 EMC: Writing LED command to MC: "L55A55555"
06:10:23:02.660 EMC: Sending changed local info to peer.
06:10:23:03.636 EMC: Other READ PAGE change detected.
06:10:23:46.869 EMC: Flare polling state turned off because bad gen number 0xfe18 received; expected 0x5b05.
06:10:23:46.878 EMC: Flare polling state change: self FAILED to NO, peer NO to NO
06:10:23:46.891 EMC: DISPLAY command success, encl number=01, mode=C.
06:10:23:47.113 EMC: Sending changed local info to peer.
06:10:24:17.784 EMC: Flare polling state change: self NO to NO, peer NO to YES
06:10:24:17.808 EMC: DISPLAY command success, encl number=01, mode=C.
06:10:24:57.046 EMC: Clearing state change bit.
06:10:24:57.052 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:24:57.062 EMC: Setting enclosure number to 1
06:10:24:57.083 EMC: DISPLAY command success, encl number=01, mode=C.
06:10:24:57.088 EMC: Flare assigns this enclosure number = 1, generation number = 0x6106
06:10:24:57.095 EMC: Flare polling state change: self NO to YES, peer YES to YES
06:10:24:57.103 Setting CPLD activity LED mode to AND because both sides being polled.
06:10:24:57.110 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:24:57.134 EMC: DISPLAY command success, encl number=01, mode=4.
06:10:24:57.324 EMC: Sending changed local info to peer.
06:10:25:05.372 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
06:10:25:05.378 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
06:10:25:05.386 Setting CPLD activity LED mode to OR because both sides not being polled.
06:10:25:05.395 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:25:05.419 EMC: DISPLAY command success, encl number=01, mode=C.
06:10:25:05.462 EMC: Sending changed local info to peer.
06:10:25:05.777 EMC: Flare polling state restored because good generation number 0x6106 received.
06:10:25:05.785 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
06:10:25:05.793 Setting CPLD activity LED mode to AND because both sides being polled.
06:10:25:05.800 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:25:05.824 EMC: DISPLAY command success, encl number=01, mode=4.
06:10:25:06.408 EMC: Sending changed local info to peer.
06:10:25:18.125 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:25:20.437 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:25:22.921 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:25:25.421 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:25:27.734 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:30:45.483 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
06:10:30:45.523 EMC: DISPLAY command success, encl number=01, mode=4.
06:10:30:45.900 Setting CPLD activity LED mode to OR because both sides not being polled.
06:10:30:49.389 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
06:10:30:49.429 EMC: DISPLAY command success, encl number=01, mode=4.
06:10:30:49.816 Setting CPLD activity LED mode to AND because both sides being polled.
06:10:30:54.518 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
06:10:30:54.541 EMC: DISPLAY command success, encl number=01, mode=4.
06:10:30:54.849 Setting CPLD activity LED mode to OR because both sides not being polled.
06:10:30:55.183 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
06:10:30:55.206 EMC: DISPLAY command success, encl number=01, mode=4.
06:10:30:55.512 Setting CPLD activity LED mode to AND because both sides being polled.
                                                                                                                                                                 

Buffer Type: SXP Trace
Buffer Id: 0
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 49th at 17:03:03.
00:00:00:01:265 EMC: Setting Update lock: 1
00:00:00:01:399 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:420 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:440 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:460 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:482 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:502 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:507 EMC: Failed to get Power Supply revision info.
00:00:00:01:514 EMC: SXP FW Version:   04.05
00:00:00:01:518 EMC: SXP BOOT Version: 03.00
00:00:00:01:522 EMC: SXP ISTR Version: 03.05
00:00:00:01:526 EMC: MC Version:       16.01
00:00:00:01:531 EMC: DLMC Version:     14.47
00:00:00:01:535 EMC: PS Version:       00.01
00:00:00:01:539 EMC: CPLD Version:     00.09
00:00:00:01:543 EMC: Base SAS Address: 50060480_00b680c0
00:00:00:01:548 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:557 EMC: Exception flag read from register is 0
00:00:00:00:985 EMC: Setting enclosure number to 255
00:00:00:01:005 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:01:026 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:049 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:069 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:090 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:112 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:119 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:142 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:165 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:185 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:239 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:259 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:265 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:287 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:308 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:330 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:350 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:370 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:375 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:383 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:01:389 EMC: Checking for updated FW!
00:00:00:01:393 EMC: Checking for SXP FW download
00:00:00:01:420 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:01:435 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:01:440 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:15:669 WDG EXPIRED: Elapsed time since last WDG run: 799 ms
00:00:00:15:674 WDG: Pong not received from: EMA
                                              

Buffer Type: SXP Trace
Buffer Id: 1
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 946
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:15.7
00:00:00:01:264 EMC: Setting Update lock: 1
00:00:00:01:350 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:384 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:404 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:424 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:445 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:467 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:472 EMC: Failed to get Power Supply revision info.
00:00:00:01:478 EMC: SXP FW Version:   04.05
00:00:00:01:483 EMC: SXP BOOT Version: 03.00
00:00:00:01:487 EMC: SXP ISTR Version: 03.05
00:00:00:01:491 EMC: MC Version:       16.01
00:00:00:01:497 EMC: DLMC Version:     14.47
00:00:00:01:501 EMC: PS Version:       00.01
00:00:00:01:505 EMC: CPLD Version:     00.13
00:00:00:15:768 WDG EXPIRED: Elapsed time since last WDG run: 229 ms
00:00:00:15:773 WDG: Pong not received from: EMA
                 

Buffer Type: SXP Trace
Buffer Id: 2
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:51.
00:00:00:01:263 EMC: Setting Update lock: 1
00:00:00:01:349 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:382 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:402 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:423 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:443 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:465 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:470 EMC: Failed to get Power Supply revision info.
00:00:00:01:476 EMC: SXP FW Version:   04.05
00:00:00:01:481 EMC: SXP BOOT Version: 03.00
00:00:00:01:485 EMC: SXP ISTR Version: 03.05
00:00:00:01:489 EMC: MC Version:       16.01
00:00:00:01:493 EMC: DLMC Version:     14.47
00:00:00:01:498 EMC: PS Version:       00.01
00:00:00:01:502 EMC: CPLD Version:     00.13
00:00:00:01:506 EMC: Base SAS Address: 50060480_00fa80c0
00:00:00:01:510 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:520 EMC: Exception flag read from register is 1
00:00:00:36:984 EMC: Setting enclosure number to 255
00:00:00:37:003 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:37:046 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:068 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:089 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:109 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:130 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:136 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:160 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:183 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:204 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:225 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:269 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:274 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:298 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:321 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:342 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:363 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:385 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:390 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:397 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:37:404 EMC: Checking for updated FW!
00:00:00:37:408 EMC: Checking for SXP FW download
00:00:00:37:436 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:37:451 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:37:456 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:51:683 WDG EXPIRED: Elapsed time since last WDG run: 792 ms
00:00:00:51:688 WDG: Pong not received from: EMA
                                              

Buffer Type: Expander Ring Buffer Trace
Buffer Id: 255
Source: Manual
SXP Major Rev: 04
SXP Minor Rev: 30
Length: -1
Timestamp: 08/06/2010 10:54:13
        
06:10:22:59.457 EMC: Writing LED command to MC: "L55B95555"
06:10:22:59.526 EMC: Sending changed local info to peer.
06:10:23:00.462 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
06:10:23:00.468 EMC: Flare polling state change: self YES to FAILED, peer NO to NO
06:10:23:00.476 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:23:00.499 EMC: DISPLAY command success, encl number=01, mode=C.
06:10:23:00.544 EMC: Other READ PAGE change detected.
06:10:23:00.548 EMC: Sending changed local info to peer.
06:10:23:01.533 EMC: Upstream cable phy 0 status going from NOT READY to READY
06:10:23:01.539 EMC: Upstream cable phy 1 status going from NOT READY to READY
06:10:23:01.547 EMC: Upstream cable phy 2 status going from NOT READY to READY
06:10:23:01.554 EMC: Upstream cable phy 3 status going from NOT READY to READY
06:10:23:01.562 EMC: Detected upstream addr chg NONE to 50060489_703ecaff.
06:10:23:01.569 EMC: Sending changed local info to peer.
06:10:23:02.510 EMC: Upstream wide port: CONNECTED.
06:10:23:02.532 EMC: Setting upstream connectivity LED to ON because upstream connection found.
06:10:23:02.540 EMC: Expander requesting Upstream Conn LED change from FLASH to ON
06:10:23:02.548 EMC: Expander requesting Encl LED change from ON to OFF
06:10:23:02.576 EMC: UPSTREAM PORT status going from UNCONNECTED to CONNECTED
06:10:23:02.583 EMC: LED updater changing Upstream Conn LED from FLASH to ON
06:10:23:02.589 EMC: Writing LED command to MC: "L55A55555"
06:10:23:02.660 EMC: Sending changed local info to peer.
06:10:23:03.636 EMC: Other READ PAGE change detected.
06:10:23:46.869 EMC: Flare polling state turned off because bad gen number 0xfe18 received; expected 0x5b05.
06:10:23:46.878 EMC: Flare polling state change: self FAILED to NO, peer NO to NO
06:10:23:46.891 EMC: DISPLAY command success, encl number=01, mode=C.
06:10:23:47.113 EMC: Sending changed local info to peer.
06:10:24:17.784 EMC: Flare polling state change: self NO to NO, peer NO to YES
06:10:24:17.808 EMC: DISPLAY command success, encl number=01, mode=C.
06:10:24:57.046 EMC: Clearing state change bit.
06:10:24:57.052 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:24:57.062 EMC: Setting enclosure number to 1
06:10:24:57.083 EMC: DISPLAY command success, encl number=01, mode=C.
06:10:24:57.088 EMC: Flare assigns this enclosure number = 1, generation number = 0x6106
06:10:24:57.095 EMC: Flare polling state change: self NO to YES, peer YES to YES
06:10:24:57.103 Setting CPLD activity LED mode to AND because both sides being polled.
06:10:24:57.110 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:24:57.134 EMC: DISPLAY command success, encl number=01, mode=4.
06:10:24:57.324 EMC: Sending changed local info to peer.
06:10:25:05.372 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
06:10:25:05.378 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
06:10:25:05.386 Setting CPLD activity LED mode to OR because both sides not being polled.
06:10:25:05.395 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:25:05.419 EMC: DISPLAY command success, encl number=01, mode=C.
06:10:25:05.462 EMC: Sending changed local info to peer.
06:10:25:05.777 EMC: Flare polling state restored because good generation number 0x6106 received.
06:10:25:05.785 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
06:10:25:05.793 Setting CPLD activity LED mode to AND because both sides being polled.
06:10:25:05.800 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:25:05.824 EMC: DISPLAY command success, encl number=01, mode=4.
06:10:25:06.408 EMC: Sending changed local info to peer.
06:10:25:18.125 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:25:20.437 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:25:22.921 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:25:25.421 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:25:27.734 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:30:45.483 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
06:10:30:45.523 EMC: DISPLAY command success, encl number=01, mode=4.
06:10:30:45.900 Setting CPLD activity LED mode to OR because both sides not being polled.
06:10:30:49.389 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
06:10:30:49.429 EMC: DISPLAY command success, encl number=01, mode=4.
06:10:30:49.816 Setting CPLD activity LED mode to AND because both sides being polled.
06:10:30:54.518 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
06:10:30:54.541 EMC: DISPLAY command success, encl number=01, mode=4.
06:10:30:54.849 Setting CPLD activity LED mode to OR because both sides not being polled.
06:10:30:55.183 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
06:10:30:55.206 EMC: DISPLAY command success, encl number=01, mode=4.
06:10:30:55.512 Setting CPLD activity LED mode to AND because both sides being polled.
06:10:36:19.443 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
06:10:36:19.481 EMC: DISPLAY command success, encl number=01, mode=4.
06:10:36:19.869 Setting CPLD activity LED mode to OR because both sides not being polled.
06:10:36:22.909 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
06:10:36:22.948 EMC: DISPLAY command success, encl number=01, mode=4.
06:10:36:23.336 Setting CPLD activity LED mode to AND because both sides being polled.
06:10:36:31.086 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
06:10:36:31.109 EMC: DISPLAY command success, encl number=01, mode=4.
06:10:36:31.415 Setting CPLD activity LED mode to OR because both sides not being polled.
06:10:36:33.020 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
06:10:36:33.043 EMC: DISPLAY command success, encl number=01, mode=4.
06:10:36:33.349 Setting CPLD activity LED mode to AND because both sides being polled.
06:10:42:09.296 EMC: Upstream cable phy 0 status going from READY to NOT READY
06:10:42:09.305 EMC: Upstream cable phy 1 status going from READY to NOT READY
06:10:42:09.312 EMC: Upstream cable phy 2 status going from READY to NOT READY
06:10:42:09.318 EMC: Upstream cable phy 3 status going from READY to NOT READY
06:10:42:09.326 EMC: Detected upstream addr chg 50060489_703ecaff to NONE.
06:10:42:09.332 EMC: Sending changed local info to peer.
06:10:42:09.987 EMC: Setting state change bit.
06:10:42:10.271 EMC: Upstream wide port: DISCONNECTED.
06:10:42:10.293 EMC: Setting upstream connectivity LED to FLASH because peer upstream connected but not me!
06:10:42:10.302 EMC: Expander requesting Upstream Conn LED change from ON to FLASH
06:10:42:10.308 EMC: Expander requesting Encl LED change from OFF to ON
06:10:42:10.336 EMC: UPSTREAM PORT status going from CONNECTED to UNCONNECTED
06:10:42:10.343 EMC: LED updater changing Upstream Conn LED from ON to FLASH
06:10:42:10.351 EMC: Writing LED command to MC: "L55B95555"
06:10:42:10.421 EMC: Sending changed local info to peer.
06:10:42:11.397 EMC: Other READ PAGE change detected.
06:10:42:11.737 EMC: Upstream cable phy 0 status going from NOT READY to READY
06:10:42:11.751 EMC: Upstream cable phy 1 status going from NOT READY to READY
06:10:42:11.763 EMC: Upstream cable phy 2 status going from NOT READY to READY
06:10:42:11.770 EMC: Upstream cable phy 3 status going from NOT READY to READY
06:10:42:11.783 EMC: Detected upstream addr chg NONE to 50060489_703ecaff.
06:10:42:11.790 EMC: Sending changed local info to peer.
06:10:42:12.734 EMC: Upstream wide port: CONNECTED.
06:10:42:12.756 EMC: Setting upstream connectivity LED to ON because upstream connection found.
06:10:42:12.765 EMC: Expander requesting Upstream Conn LED change from FLASH to ON
06:10:42:12.772 EMC: Expander requesting Encl LED change from ON to OFF
06:10:42:12.799 EMC: UPSTREAM PORT status going from UNCONNECTED to CONNECTED
06:10:42:12.806 EMC: LED updater changing Upstream Conn LED from FLASH to ON
06:10:42:12.812 EMC: Writing LED command to MC: "L55A55555"
06:10:42:12.884 EMC: Sending changed local info to peer.
06:10:42:13.822 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
06:10:42:13.828 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
06:10:42:13.836 Setting CPLD activity LED mode to OR because both sides not being polled.
06:10:42:13.845 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:42:13.868 EMC: DISPLAY command success, encl number=01, mode=C.
06:10:42:13.910 EMC: Other READ PAGE change detected.
06:10:42:13.915 EMC: Sending changed local info to peer.
06:10:42:14.817 EMC: ...read processing took 0 ms, status=Success
06:10:42:57.976 EMC: Flare polling state turned off because bad gen number 0xfe18 received; expected 0x6106.
06:10:42:57.986 EMC: Flare polling state change: self FAILED to NO, peer YES to YES
06:10:42:58.008 EMC: DISPLAY command success, encl number=01, mode=C.
06:10:42:58.100 EMC: Sending changed local info to peer.
06:10:44:08.875 EMC: Clearing state change bit.
06:10:44:08.880 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:44:08.890 EMC: Setting enclosure number to 1
06:10:44:08.913 EMC: DISPLAY command success, encl number=01, mode=C.
06:10:44:08.918 EMC: Flare assigns this enclosure number = 1, generation number = 0x0004
06:10:44:08.925 EMC: Flare polling state change: self NO to YES, peer YES to YES
06:10:44:08.934 Setting CPLD activity LED mode to AND because both sides being polled.
06:10:44:08.941 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:44:08.965 EMC: DISPLAY command success, encl number=01, mode=4.
06:10:44:09.171 EMC: Sending changed local info to peer.
06:10:44:34.156 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:44:36.515 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:44:38.781 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:44:41.156 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:44:43.484 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:51:45.670 EMC: Detected peer upstream addr chg 50060489_703ecabf to NONE.
06:10:51:45.677 EMC: Setting state change bit.
06:10:51:46.310 EMC: Other READ PAGE change detected.
06:10:51:46.953 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
06:10:51:46.977 EMC: DISPLAY command success, encl number=01, mode=4.
06:10:51:47.276 Setting CPLD activity LED mode to OR because both sides not being polled.
06:10:51:48.222 EMC: Detected peer upstream addr chg NONE to 50060489_703ecabf.
06:10:51:48.734 EMC: Clearing state change bit.
06:10:51:48.738 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:51:48.798 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:51:49.429 EMC: ...read processing took 0 ms, status=Success
06:10:51:50.589 EMC: Other READ PAGE change detected.
06:10:51:50.593 EMC: Setting state change bit.
06:10:51:52.015 EMC: Clearing state change bit.
06:10:51:52.019 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:51:52.093 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:52:34.383 EMC: Flare polling state change: self YES to YES, peer FAILED to NO
06:10:52:34.396 EMC: DISPLAY command success, encl number=01, mode=4.
06:10:52:34.401 EMC: ...read processing took 20 ms, status=Success
06:10:53:47.771 EMC: Flare polling state change: self YES to YES, peer NO to YES
06:10:54:18.279 Setting CPLD activity LED mode to OR because both sides not being polled.
06:10:54:18.290 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:54:18.324 EMC: DISPLAY command success, encl number=01, mode=C.
06:10:54:18.436 EMC: Sending changed local info to peer.
                                                                                                                                                                  

Buffer Type: SXP Trace
Buffer Id: 0
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 49th at 17:03:03.
00:00:00:01:265 EMC: Setting Update lock: 1
00:00:00:01:399 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:420 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:440 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:460 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:482 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:502 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:507 EMC: Failed to get Power Supply revision info.
00:00:00:01:514 EMC: SXP FW Version:   04.05
00:00:00:01:518 EMC: SXP BOOT Version: 03.00
00:00:00:01:522 EMC: SXP ISTR Version: 03.05
00:00:00:01:526 EMC: MC Version:       16.01
00:00:00:01:531 EMC: DLMC Version:     14.47
00:00:00:01:535 EMC: PS Version:       00.01
00:00:00:01:539 EMC: CPLD Version:     00.09
00:00:00:01:543 EMC: Base SAS Address: 50060480_00b680c0
00:00:00:01:548 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:557 EMC: Exception flag read from register is 0
00:00:00:00:985 EMC: Setting enclosure number to 255
00:00:00:01:005 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:01:026 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:049 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:069 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:090 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:112 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:119 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:142 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:165 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:185 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:239 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:259 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:265 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:287 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:308 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:330 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:350 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:370 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:375 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:383 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:01:389 EMC: Checking for updated FW!
00:00:00:01:393 EMC: Checking for SXP FW download
00:00:00:01:420 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:01:435 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:01:440 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:15:669 WDG EXPIRED: Elapsed time since last WDG run: 799 ms
00:00:00:15:674 WDG: Pong not received from: EMA
                                              

Buffer Type: SXP Trace
Buffer Id: 1
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 946
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:15.7
00:00:00:01:264 EMC: Setting Update lock: 1
00:00:00:01:350 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:384 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:404 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:424 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:445 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:467 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:472 EMC: Failed to get Power Supply revision info.
00:00:00:01:478 EMC: SXP FW Version:   04.05
00:00:00:01:483 EMC: SXP BOOT Version: 03.00
00:00:00:01:487 EMC: SXP ISTR Version: 03.05
00:00:00:01:491 EMC: MC Version:       16.01
00:00:00:01:497 EMC: DLMC Version:     14.47
00:00:00:01:501 EMC: PS Version:       00.01
00:00:00:01:505 EMC: CPLD Version:     00.13
00:00:00:15:768 WDG EXPIRED: Elapsed time since last WDG run: 229 ms
00:00:00:15:773 WDG: Pong not received from: EMA
                 

Buffer Type: SXP Trace
Buffer Id: 2
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:51.
00:00:00:01:263 EMC: Setting Update lock: 1
00:00:00:01:349 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:382 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:402 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:423 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:443 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:465 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:470 EMC: Failed to get Power Supply revision info.
00:00:00:01:476 EMC: SXP FW Version:   04.05
00:00:00:01:481 EMC: SXP BOOT Version: 03.00
00:00:00:01:485 EMC: SXP ISTR Version: 03.05
00:00:00:01:489 EMC: MC Version:       16.01
00:00:00:01:493 EMC: DLMC Version:     14.47
00:00:00:01:498 EMC: PS Version:       00.01
00:00:00:01:502 EMC: CPLD Version:     00.13
00:00:00:01:506 EMC: Base SAS Address: 50060480_00fa80c0
00:00:00:01:510 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:520 EMC: Exception flag read from register is 1
00:00:00:36:984 EMC: Setting enclosure number to 255
00:00:00:37:003 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:37:046 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:068 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:089 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:109 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:130 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:136 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:160 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:183 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:204 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:225 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:269 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:274 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:298 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:321 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:342 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:363 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:385 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:390 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:397 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:37:404 EMC: Checking for updated FW!
00:00:00:37:408 EMC: Checking for SXP FW download
00:00:00:37:436 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:37:451 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:37:456 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:51:683 WDG EXPIRED: Elapsed time since last WDG run: 792 ms
00:00:00:51:688 WDG: Pong not received from: EMA
                                              

Buffer Type: Expander Ring Buffer Trace
Buffer Id: 255
Source: Manual
SXP Major Rev: 04
SXP Minor Rev: 30
Length: -1
Timestamp: 08/06/2010 11:16:22
        
06:10:42:13.836 Setting CPLD activity LED mode to OR because both sides not being polled.
06:10:42:13.845 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:42:13.868 EMC: DISPLAY command success, encl number=01, mode=C.
06:10:42:13.910 EMC: Other READ PAGE change detected.
06:10:42:13.915 EMC: Sending changed local info to peer.
06:10:42:14.817 EMC: ...read processing took 0 ms, status=Success
06:10:42:57.976 EMC: Flare polling state turned off because bad gen number 0xfe18 received; expected 0x6106.
06:10:42:57.986 EMC: Flare polling state change: self FAILED to NO, peer YES to YES
06:10:42:58.008 EMC: DISPLAY command success, encl number=01, mode=C.
06:10:42:58.100 EMC: Sending changed local info to peer.
06:10:44:08.875 EMC: Clearing state change bit.
06:10:44:08.880 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:44:08.890 EMC: Setting enclosure number to 1
06:10:44:08.913 EMC: DISPLAY command success, encl number=01, mode=C.
06:10:44:08.918 EMC: Flare assigns this enclosure number = 1, generation number = 0x0004
06:10:44:08.925 EMC: Flare polling state change: self NO to YES, peer YES to YES
06:10:44:08.934 Setting CPLD activity LED mode to AND because both sides being polled.
06:10:44:08.941 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:44:08.965 EMC: DISPLAY command success, encl number=01, mode=4.
06:10:44:09.171 EMC: Sending changed local info to peer.
06:10:44:34.156 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:44:36.515 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:44:38.781 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:44:41.156 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:44:43.484 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:51:45.670 EMC: Detected peer upstream addr chg 50060489_703ecabf to NONE.
06:10:51:45.677 EMC: Setting state change bit.
06:10:51:46.310 EMC: Other READ PAGE change detected.
06:10:51:46.953 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
06:10:51:46.977 EMC: DISPLAY command success, encl number=01, mode=4.
06:10:51:47.276 Setting CPLD activity LED mode to OR because both sides not being polled.
06:10:51:48.222 EMC: Detected peer upstream addr chg NONE to 50060489_703ecabf.
06:10:51:48.734 EMC: Clearing state change bit.
06:10:51:48.738 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:51:48.798 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:51:49.429 EMC: ...read processing took 0 ms, status=Success
06:10:51:50.589 EMC: Other READ PAGE change detected.
06:10:51:50.593 EMC: Setting state change bit.
06:10:51:52.015 EMC: Clearing state change bit.
06:10:51:52.019 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:51:52.093 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:52:34.383 EMC: Flare polling state change: self YES to YES, peer FAILED to NO
06:10:52:34.396 EMC: DISPLAY command success, encl number=01, mode=4.
06:10:52:34.401 EMC: ...read processing took 20 ms, status=Success
06:10:53:47.771 EMC: Flare polling state change: self YES to YES, peer NO to YES
06:10:53:47.793 EMC: DISPLAY command success, encl number=01, mode=4.
06:10:53:48.099 Setting CPLD activity LED mode to AND because both sides being polled.
06:10:53:52.625 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:54:18.262 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
06:10:54:18.270 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
06:10:54:18.279 Setting CPLD activity LED mode to OR because both sides not being polled.
06:10:54:18.290 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:54:18.324 EMC: DISPLAY command success, encl number=01, mode=C.
06:10:54:18.436 EMC: Sending changed local info to peer.
06:10:54:22.776 EMC: Flare polling state restored because good generation number 0x0004 received.
06:10:54:22.784 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
06:10:54:22.793 Setting CPLD activity LED mode to AND because both sides being polled.
06:10:54:22.800 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:54:22.825 EMC: DISPLAY command success, encl number=01, mode=4.
06:10:54:19.351 EMC: Sending changed local info to peer.
06:10:54:24.396 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
06:10:54:24.404 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
06:10:54:24.411 Setting CPLD activity LED mode to OR because both sides not being polled.
06:10:54:24.420 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:54:24.449 EMC: DISPLAY command success, encl number=01, mode=C.
06:10:54:24.562 EMC: Sending changed local info to peer.
06:10:54:26.694 EMC: Flare polling state restored because good generation number 0x0004 received.
06:10:54:26.702 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
06:10:54:26.711 Setting CPLD activity LED mode to AND because both sides being polled.
06:10:54:26.718 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:54:26.743 EMC: DISPLAY command success, encl number=01, mode=4.
06:10:54:30.706 EMC: Sending changed local info to peer.
06:10:54:31.915 EMC: ...read processing took 0 ms, status=Success
06:10:54:32.568 EMC: ...write took 646 ms, status=Success
06:11:00:23.791 EMC: Detected peer upstream addr chg 50060489_703ecabf to NONE.
06:11:00:23.797 EMC: Setting state change bit.
06:11:00:24.418 EMC: Other READ PAGE change detected.
06:11:00:26.269 EMC: ...read processing took 0 ms, status=Success
06:11:00:27.171 EMC: Clearing state change bit.
06:11:00:27.234 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:00:27.687 EMC: Detected peer upstream addr chg NONE to 50060489_703ecabf.
06:11:00:27.695 EMC: Setting state change bit.
06:11:00:28.962 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
06:11:00:28.985 EMC: DISPLAY command success, encl number=01, mode=4.
06:11:00:29.293 EMC: Other READ PAGE change detected.
06:11:00:29.297 Setting CPLD activity LED mode to OR because both sides not being polled.
06:11:00:30.453 EMC: Clearing state change bit.
06:11:00:30.457 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:00:30.515 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:01:13.153 EMC: Flare polling state change: self YES to YES, peer FAILED to NO
06:11:01:13.176 EMC: DISPLAY command success, encl number=01, mode=4.
06:11:02:26.433 EMC: Flare polling state change: self YES to YES, peer NO to YES
06:11:02:26.456 EMC: DISPLAY command success, encl number=01, mode=4.
06:11:02:26.762 Setting CPLD activity LED mode to AND because both sides being polled.
06:11:02:30.828 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:09:51.535 EMC: Upstream cable phy 0 status going from READY to NOT READY
06:11:09:51.543 EMC: Upstream cable phy 1 status going from READY to NOT READY
06:11:09:51.550 EMC: Upstream cable phy 2 status going from READY to NOT READY
06:11:09:51.557 EMC: Upstream cable phy 3 status going from READY to NOT READY
06:11:09:51.565 EMC: Detected upstream addr chg 50060489_703ecaff to NONE.
06:11:09:51.572 EMC: Sending changed local info to peer.
06:11:09:52.225 EMC: Setting state change bit.
06:11:09:52.517 EMC: Upstream wide port: DISCONNECTED.
06:11:09:52.539 EMC: Setting upstream connectivity LED to FLASH because peer upstream connected but not me!
06:11:09:52.549 EMC: Expander requesting Upstream Conn LED change from ON to FLASH
06:11:09:52.556 EMC: Expander requesting Encl LED change from OFF to ON
06:11:09:52.584 EMC: UPSTREAM PORT status going from CONNECTED to UNCONNECTED
06:11:09:52.590 EMC: LED updater changing Upstream Conn LED from ON to FLASH
06:11:09:52.597 EMC: Writing LED command to MC: "L55B95555"
06:11:09:52.666 EMC: Sending changed local info to peer.
06:11:09:53.638 EMC: Other READ PAGE change detected.
06:11:09:54.302 EMC: Upstream cable phy 0 status going from NOT READY to READY
06:11:09:54.310 EMC: Upstream cable phy 1 status going from NOT READY to READY
06:11:09:54.316 EMC: Upstream cable phy 2 status going from NOT READY to READY
06:11:09:54.323 EMC: Upstream cable phy 3 status going from NOT READY to READY
06:11:09:54.331 EMC: Detected upstream addr chg NONE to 50060489_703ecaff.
06:11:09:54.337 EMC: Sending changed local info to peer.
06:11:09:54.975 EMC: Upstream wide port: CONNECTED.
06:11:09:54.997 EMC: Setting upstream connectivity LED to ON because upstream connection found.
06:11:09:55.005 EMC: Expander requesting Upstream Conn LED change from FLASH to ON
06:11:09:55.012 EMC: Expander requesting Encl LED change from ON to OFF
06:11:09:55.040 EMC: UPSTREAM PORT status going from UNCONNECTED to CONNECTED
06:11:09:55.047 EMC: LED updater changing Upstream Conn LED from FLASH to ON
06:11:09:55.055 EMC: Writing LED command to MC: "L55A55555"
06:11:09:55.124 EMC: Sending changed local info to peer.
06:11:09:56.332 EMC: ...read processing took 0 ms, status=Success
06:11:09:56.981 EMC: ...write took 644 ms, status=Success
06:11:09:57.275 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
06:11:09:57.283 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
06:11:09:57.290 Setting CPLD activity LED mode to OR because both sides not being polled.
06:11:09:57.299 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:09:57.321 EMC: DISPLAY command success, encl number=01, mode=C.
06:11:09:57.366 EMC: Other READ PAGE change detected.
06:11:09:57.370 EMC: Sending changed local info to peer.
06:11:10:40.205 EMC: Flare polling state turned off because bad gen number 0xfe18 received; expected 0x0004.
06:11:10:40.215 EMC: Flare polling state change: self FAILED to NO, peer YES to YES
06:11:10:40.237 EMC: DISPLAY command success, encl number=01, mode=C.
06:11:10:40.930 EMC: Sending changed local info to peer.
06:11:11:54.750 EMC: Clearing state change bit.
06:11:11:54.754 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:11:54.765 EMC: Setting enclosure number to 1
06:11:11:54.784 EMC: DISPLAY command success, encl number=01, mode=C.
06:11:11:54.789 EMC: Flare assigns this enclosure number = 1, generation number = 0xd603
06:11:11:54.797 EMC: Flare polling state change: self NO to YES, peer YES to YES
06:11:11:54.805 Setting CPLD activity LED mode to AND because both sides being polled.
06:11:11:54.812 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:11:54.834 EMC: DISPLAY command success, encl number=01, mode=4.
06:11:11:54.881 EMC: Sending changed local info to peer.
06:11:12:19.921 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:12:22.156 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:12:24.406 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:12:26.671 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:12:29.046 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:12:39.445 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
06:11:12:39.468 EMC: DISPLAY command success, encl number=01, mode=4.
06:11:12:39.473 EMC: ...read processing took 29 ms, status=Success
06:11:12:40.454 Setting CPLD activity LED mode to OR because both sides not being polled.
06:11:12:42.746 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
06:11:12:42.772 EMC: DISPLAY command success, encl number=01, mode=4.
06:11:12:43.082 Setting CPLD activity LED mode to AND because both sides being polled.
06:11:16:29.974 EMC: Sending changed local info to peer.
                                                                                                                                                                  

Buffer Type: SXP Trace
Buffer Id: 0
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 49th at 17:03:03.
00:00:00:01:265 EMC: Setting Update lock: 1
00:00:00:01:399 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:420 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:440 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:460 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:482 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:502 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:507 EMC: Failed to get Power Supply revision info.
00:00:00:01:514 EMC: SXP FW Version:   04.05
00:00:00:01:518 EMC: SXP BOOT Version: 03.00
00:00:00:01:522 EMC: SXP ISTR Version: 03.05
00:00:00:01:526 EMC: MC Version:       16.01
00:00:00:01:531 EMC: DLMC Version:     14.47
00:00:00:01:535 EMC: PS Version:       00.01
00:00:00:01:539 EMC: CPLD Version:     00.09
00:00:00:01:543 EMC: Base SAS Address: 50060480_00b680c0
00:00:00:01:548 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:557 EMC: Exception flag read from register is 0
00:00:00:00:985 EMC: Setting enclosure number to 255
00:00:00:01:005 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:01:026 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:049 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:069 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:090 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:112 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:119 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:142 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:165 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:185 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:239 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:259 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:265 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:287 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:308 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:330 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:350 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:370 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:375 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:383 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:01:389 EMC: Checking for updated FW!
00:00:00:01:393 EMC: Checking for SXP FW download
00:00:00:01:420 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:01:435 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:01:440 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:15:669 WDG EXPIRED: Elapsed time since last WDG run: 799 ms
00:00:00:15:674 WDG: Pong not received from: EMA
                                              

Buffer Type: SXP Trace
Buffer Id: 1
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 946
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:15.7
00:00:00:01:264 EMC: Setting Update lock: 1
00:00:00:01:350 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:384 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:404 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:424 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:445 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:467 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:472 EMC: Failed to get Power Supply revision info.
00:00:00:01:478 EMC: SXP FW Version:   04.05
00:00:00:01:483 EMC: SXP BOOT Version: 03.00
00:00:00:01:487 EMC: SXP ISTR Version: 03.05
00:00:00:01:491 EMC: MC Version:       16.01
00:00:00:01:497 EMC: DLMC Version:     14.47
00:00:00:01:501 EMC: PS Version:       00.01
00:00:00:01:505 EMC: CPLD Version:     00.13
00:00:00:15:768 WDG EXPIRED: Elapsed time since last WDG run: 229 ms
00:00:00:15:773 WDG: Pong not received from: EMA
                 

Buffer Type: SXP Trace
Buffer Id: 2
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:51.
00:00:00:01:263 EMC: Setting Update lock: 1
00:00:00:01:349 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:382 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:402 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:423 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:443 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:465 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:470 EMC: Failed to get Power Supply revision info.
00:00:00:01:476 EMC: SXP FW Version:   04.05
00:00:00:01:481 EMC: SXP BOOT Version: 03.00
00:00:00:01:485 EMC: SXP ISTR Version: 03.05
00:00:00:01:489 EMC: MC Version:       16.01
00:00:00:01:493 EMC: DLMC Version:     14.47
00:00:00:01:498 EMC: PS Version:       00.01
00:00:00:01:502 EMC: CPLD Version:     00.13
00:00:00:01:506 EMC: Base SAS Address: 50060480_00fa80c0
00:00:00:01:510 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:520 EMC: Exception flag read from register is 1
00:00:00:36:984 EMC: Setting enclosure number to 255
00:00:00:37:003 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:37:046 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:068 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:089 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:109 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:130 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:136 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:160 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:183 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:204 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:225 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:269 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:274 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:298 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:321 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:342 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:363 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:385 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:390 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:397 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:37:404 EMC: Checking for updated FW!
00:00:00:37:408 EMC: Checking for SXP FW download
00:00:00:37:436 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:37:451 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:37:456 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:51:683 WDG EXPIRED: Elapsed time since last WDG run: 792 ms
00:00:00:51:688 WDG: Pong not received from: EMA
                                              

Buffer Type: Expander Ring Buffer Trace
Buffer Id: 255
Source: Manual
SXP Major Rev: 04
SXP Minor Rev: 30
Length: -1
Timestamp: 08/06/2010 12:30:38
        
06:11:09:52.225 EMC: Setting state change bit.
06:11:09:52.517 EMC: Upstream wide port: DISCONNECTED.
06:11:09:52.539 EMC: Setting upstream connectivity LED to FLASH because peer upstream connected but not me!
06:11:09:52.549 EMC: Expander requesting Upstream Conn LED change from ON to FLASH
06:11:09:52.556 EMC: Expander requesting Encl LED change from OFF to ON
06:11:09:52.584 EMC: UPSTREAM PORT status going from CONNECTED to UNCONNECTED
06:11:09:52.590 EMC: LED updater changing Upstream Conn LED from ON to FLASH
06:11:09:52.597 EMC: Writing LED command to MC: "L55B95555"
06:11:09:52.666 EMC: Sending changed local info to peer.
06:11:09:53.638 EMC: Other READ PAGE change detected.
06:11:09:54.302 EMC: Upstream cable phy 0 status going from NOT READY to READY
06:11:09:54.310 EMC: Upstream cable phy 1 status going from NOT READY to READY
06:11:09:54.316 EMC: Upstream cable phy 2 status going from NOT READY to READY
06:11:09:54.323 EMC: Upstream cable phy 3 status going from NOT READY to READY
06:11:09:54.331 EMC: Detected upstream addr chg NONE to 50060489_703ecaff.
06:11:09:54.337 EMC: Sending changed local info to peer.
06:11:09:54.975 EMC: Upstream wide port: CONNECTED.
06:11:09:54.997 EMC: Setting upstream connectivity LED to ON because upstream connection found.
06:11:09:55.005 EMC: Expander requesting Upstream Conn LED change from FLASH to ON
06:11:09:55.012 EMC: Expander requesting Encl LED change from ON to OFF
06:11:09:55.040 EMC: UPSTREAM PORT status going from UNCONNECTED to CONNECTED
06:11:09:55.047 EMC: LED updater changing Upstream Conn LED from FLASH to ON
06:11:09:55.055 EMC: Writing LED command to MC: "L55A55555"
06:11:09:55.124 EMC: Sending changed local info to peer.
06:11:09:56.332 EMC: ...read processing took 0 ms, status=Success
06:11:09:56.981 EMC: ...write took 644 ms, status=Success
06:11:09:57.275 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
06:11:09:57.283 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
06:11:09:57.290 Setting CPLD activity LED mode to OR because both sides not being polled.
06:11:09:57.299 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:09:57.321 EMC: DISPLAY command success, encl number=01, mode=C.
06:11:09:57.366 EMC: Other READ PAGE change detected.
06:11:09:57.370 EMC: Sending changed local info to peer.
06:11:10:40.205 EMC: Flare polling state turned off because bad gen number 0xfe18 received; expected 0x0004.
06:11:10:40.215 EMC: Flare polling state change: self FAILED to NO, peer YES to YES
06:11:10:40.237 EMC: DISPLAY command success, encl number=01, mode=C.
06:11:10:40.930 EMC: Sending changed local info to peer.
06:11:11:54.750 EMC: Clearing state change bit.
06:11:11:54.754 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:11:54.765 EMC: Setting enclosure number to 1
06:11:11:54.784 EMC: DISPLAY command success, encl number=01, mode=C.
06:11:11:54.789 EMC: Flare assigns this enclosure number = 1, generation number = 0xd603
06:11:11:54.797 EMC: Flare polling state change: self NO to YES, peer YES to YES
06:11:11:54.805 Setting CPLD activity LED mode to AND because both sides being polled.
06:11:11:54.812 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:11:54.834 EMC: DISPLAY command success, encl number=01, mode=4.
06:11:11:54.881 EMC: Sending changed local info to peer.
06:11:12:19.921 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:12:22.156 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:12:24.406 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:12:26.671 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:12:29.046 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:12:39.445 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
06:11:12:39.468 EMC: DISPLAY command success, encl number=01, mode=4.
06:11:12:39.473 EMC: ...read processing took 29 ms, status=Success
06:11:12:40.454 Setting CPLD activity LED mode to OR because both sides not being polled.
06:11:12:42.746 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
06:11:12:42.772 EMC: DISPLAY command success, encl number=01, mode=4.
06:11:12:43.082 Setting CPLD activity LED mode to AND because both sides being polled.
06:11:16:29.801 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
06:11:16:29.807 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
06:11:16:29.816 Setting CPLD activity LED mode to OR because both sides not being polled.
06:11:16:29.826 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:16:29.860 EMC: DISPLAY command success, encl number=01, mode=C.
06:11:16:29.974 EMC: Sending changed local info to peer.
06:11:16:34.750 EMC: Flare polling state restored because good generation number 0xd603 received.
06:11:16:34.758 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
06:11:16:34.765 Setting CPLD activity LED mode to AND because both sides being polled.
06:11:16:34.773 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:16:34.796 EMC: DISPLAY command success, encl number=01, mode=4.
06:11:16:31.684 EMC: Sending changed local info to peer.
06:11:21:18.739 EMC: Detected peer upstream addr chg 50060489_703ecabf to NONE.
06:11:21:18.745 EMC: Setting state change bit.
06:11:21:22.939 EMC: Clearing state change bit.
06:11:21:23.015 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:21:23.997 EMC: Other READ PAGE change detected.
06:11:21:24.001 EMC: Setting state change bit.
06:11:21:25.240 EMC: Detected peer upstream addr chg NONE to 50060489_703ecabf.
06:11:21:26.189 EMC: Other READ PAGE change detected.
06:11:21:26.203 EMC: Clearing state change bit.
06:11:21:26.207 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:21:26.281 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:21:27.175 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
06:11:21:27.188 EMC: DISPLAY command success, encl number=01, mode=4.
06:11:21:27.487 Setting CPLD activity LED mode to OR because both sides not being polled.
06:11:22:11.634 EMC: Flare polling state change: self YES to YES, peer FAILED to NO
06:11:22:11.657 EMC: DISPLAY command success, encl number=01, mode=4.
06:11:22:11.663 EMC: ...read processing took 30 ms, status=Success
06:11:23:23.675 EMC: Flare polling state change: self YES to YES, peer NO to YES
06:11:23:23.687 EMC: DISPLAY command success, encl number=01, mode=4.
06:11:23:23.987 Setting CPLD activity LED mode to AND because both sides being polled.
06:11:23:28.437 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:25:47.343 EMC: Upstream wide port: DISCONNECTED.
06:11:25:47.389 EMC: Upstream cable phy 0 status going from READY to NOT READY
06:11:25:47.395 EMC: Upstream cable phy 1 status going from READY to NOT READY
06:11:25:47.403 EMC: Upstream cable phy 2 status going from READY to NOT READY
06:11:25:47.409 EMC: Upstream cable phy 3 status going from READY to NOT READY
06:11:25:47.416 EMC: Detected upstream addr chg 50060489_703ecaff to NONE.
06:11:25:47.424 EMC: Sending changed local info to peer.
06:11:25:48.071 EMC: Setting state change bit.
06:11:25:48.388 EMC: Setting upstream connectivity LED to FLASH because peer upstream connected but not me!
06:11:25:48.397 EMC: Expander requesting Upstream Conn LED change from ON to FLASH
06:11:25:48.404 EMC: Expander requesting Encl LED change from OFF to ON
06:11:25:48.430 EMC: UPSTREAM PORT status going from CONNECTED to UNCONNECTED
06:11:25:48.437 EMC: LED updater changing Upstream Conn LED from ON to FLASH
06:11:25:48.443 EMC: Writing LED command to MC: "L55B95555"
06:11:25:48.513 EMC: Sending changed local info to peer.
06:11:25:49.188 EMC: Other READ PAGE change detected.
06:11:25:49.522 EMC: Upstream cable phy 0 status going from NOT READY to READY
06:11:25:49.529 EMC: Upstream cable phy 1 status going from NOT READY to READY
06:11:25:49.536 EMC: Upstream cable phy 2 status going from NOT READY to READY
06:11:25:49.543 EMC: Upstream cable phy 3 status going from NOT READY to READY
06:11:25:49.551 EMC: Detected upstream addr chg NONE to 50060489_703ecaff.
06:11:25:49.557 EMC: Sending changed local info to peer.
06:11:25:50.499 EMC: Upstream wide port: CONNECTED.
06:11:25:50.503 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
06:11:25:50.510 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
06:11:25:50.518 Setting CPLD activity LED mode to OR because both sides not being polled.
06:11:25:50.527 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:25:50.550 EMC: DISPLAY command success, encl number=01, mode=C.
06:11:25:50.573 EMC: Setting upstream connectivity LED to ON because upstream connection found.
06:11:25:50.582 EMC: Expander requesting Upstream Conn LED change from FLASH to ON
06:11:25:50.589 EMC: Expander requesting Encl LED change from ON to OFF
06:11:25:50.616 EMC: UPSTREAM PORT status going from UNCONNECTED to CONNECTED
06:11:25:50.623 EMC: LED updater changing Upstream Conn LED from FLASH to ON
06:11:25:50.630 EMC: Writing LED command to MC: "L55A55555"
06:11:25:50.699 EMC: Sending changed local info to peer.
06:11:25:51.673 EMC: Other READ PAGE change detected.
06:11:26:34.168 EMC: Flare polling state turned off because bad gen number 0xfe18 received; expected 0xd603.
06:11:26:34.178 EMC: Flare polling state change: self FAILED to NO, peer YES to YES
06:11:26:34.200 EMC: DISPLAY command success, encl number=01, mode=C.
06:11:26:34.407 EMC: Sending changed local info to peer.
06:11:26:35.338 EMC: ...read processing took 0 ms, status=Success
06:11:27:46.828 EMC: Clearing state change bit.
06:11:27:46.832 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:27:46.843 EMC: Setting enclosure number to 1
06:11:27:46.857 EMC: DISPLAY command success, encl number=01, mode=C.
06:11:27:46.862 EMC: Flare assigns this enclosure number = 1, generation number = 0xe507
06:11:27:46.870 EMC: Flare polling state change: self NO to YES, peer YES to YES
06:11:27:46.878 Setting CPLD activity LED mode to AND because both sides being polled.
06:11:27:46.886 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:27:46.897 EMC: Sending changed local info to peer.
06:11:27:46.908 EMC: DISPLAY command success, encl number=01, mode=4.
06:11:28:11.484 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:28:13.843 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:28:16.015 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:28:18.281 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:28:20.671 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:12:28:31.387 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
06:12:28:31.411 EMC: DISPLAY command success, encl number=01, mode=4.
06:12:28:31.723 Setting CPLD activity LED mode to OR because both sides not being polled.
06:12:28:34.914 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
06:12:28:34.937 EMC: DISPLAY command success, encl number=01, mode=4.
06:12:28:35.243 Setting CPLD activity LED mode to AND because both sides being polled.
06:12:28:44.327 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
06:12:28:44.352 EMC: DISPLAY command success, encl number=01, mode=4.
06:12:28:44.662 Setting CPLD activity LED mode to OR because both sides not being polled.
06:12:28:45.323 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
06:12:28:45.347 EMC: DISPLAY command success, encl number=01, mode=4.
06:12:28:45.646 Setting CPLD activity LED mode to AND because both sides being polled.
                                                                                                                                                                 

Buffer Type: SXP Trace
Buffer Id: 0
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 49th at 17:03:03.
00:00:00:01:265 EMC: Setting Update lock: 1
00:00:00:01:399 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:420 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:440 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:460 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:482 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:502 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:507 EMC: Failed to get Power Supply revision info.
00:00:00:01:514 EMC: SXP FW Version:   04.05
00:00:00:01:518 EMC: SXP BOOT Version: 03.00
00:00:00:01:522 EMC: SXP ISTR Version: 03.05
00:00:00:01:526 EMC: MC Version:       16.01
00:00:00:01:531 EMC: DLMC Version:     14.47
00:00:00:01:535 EMC: PS Version:       00.01
00:00:00:01:539 EMC: CPLD Version:     00.09
00:00:00:01:543 EMC: Base SAS Address: 50060480_00b680c0
00:00:00:01:548 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:557 EMC: Exception flag read from register is 0
00:00:00:00:985 EMC: Setting enclosure number to 255
00:00:00:01:005 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:01:026 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:049 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:069 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:090 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:112 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:119 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:142 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:165 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:185 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:239 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:259 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:265 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:287 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:308 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:330 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:350 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:370 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:375 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:383 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:01:389 EMC: Checking for updated FW!
00:00:00:01:393 EMC: Checking for SXP FW download
00:00:00:01:420 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:01:435 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:01:440 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:15:669 WDG EXPIRED: Elapsed time since last WDG run: 799 ms
00:00:00:15:674 WDG: Pong not received from: EMA
                                              

Buffer Type: SXP Trace
Buffer Id: 1
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 946
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:15.7
00:00:00:01:264 EMC: Setting Update lock: 1
00:00:00:01:350 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:384 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:404 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:424 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:445 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:467 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:472 EMC: Failed to get Power Supply revision info.
00:00:00:01:478 EMC: SXP FW Version:   04.05
00:00:00:01:483 EMC: SXP BOOT Version: 03.00
00:00:00:01:487 EMC: SXP ISTR Version: 03.05
00:00:00:01:491 EMC: MC Version:       16.01
00:00:00:01:497 EMC: DLMC Version:     14.47
00:00:00:01:501 EMC: PS Version:       00.01
00:00:00:01:505 EMC: CPLD Version:     00.13
00:00:00:15:768 WDG EXPIRED: Elapsed time since last WDG run: 229 ms
00:00:00:15:773 WDG: Pong not received from: EMA
                 

Buffer Type: SXP Trace
Buffer Id: 2
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:51.
00:00:00:01:263 EMC: Setting Update lock: 1
00:00:00:01:349 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:382 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:402 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:423 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:443 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:465 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:470 EMC: Failed to get Power Supply revision info.
00:00:00:01:476 EMC: SXP FW Version:   04.05
00:00:00:01:481 EMC: SXP BOOT Version: 03.00
00:00:00:01:485 EMC: SXP ISTR Version: 03.05
00:00:00:01:489 EMC: MC Version:       16.01
00:00:00:01:493 EMC: DLMC Version:     14.47
00:00:00:01:498 EMC: PS Version:       00.01
00:00:00:01:502 EMC: CPLD Version:     00.13
00:00:00:01:506 EMC: Base SAS Address: 50060480_00fa80c0
00:00:00:01:510 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:520 EMC: Exception flag read from register is 1
00:00:00:36:984 EMC: Setting enclosure number to 255
00:00:00:37:003 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:37:046 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:068 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:089 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:109 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:130 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:136 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:160 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:183 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:204 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:225 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:269 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:274 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:298 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:321 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:342 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:363 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:385 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:390 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:397 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:37:404 EMC: Checking for updated FW!
00:00:00:37:408 EMC: Checking for SXP FW download
00:00:00:37:436 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:37:451 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:37:456 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:51:683 WDG EXPIRED: Elapsed time since last WDG run: 792 ms
00:00:00:51:688 WDG: Pong not received from: EMA
                                              

Buffer Type: Expander Ring Buffer Trace
Buffer Id: 255
Source: Manual
SXP Major Rev: 04
SXP Minor Rev: 30
Length: -1
Timestamp: 08/08/2010 00:30:19
        
06:11:09:54.975 EMC: Upstream wide port: CONNECTED.
06:11:09:54.997 EMC: Setting upstream connectivity LED to ON because upstream connection found.
06:11:09:55.005 EMC: Expander requesting Upstream Conn LED change from FLASH to ON
06:11:09:55.012 EMC: Expander requesting Encl LED change from ON to OFF
06:11:09:55.040 EMC: UPSTREAM PORT status going from UNCONNECTED to CONNECTED
06:11:09:55.047 EMC: LED updater changing Upstream Conn LED from FLASH to ON
06:11:09:55.055 EMC: Writing LED command to MC: "L55A55555"
06:11:09:55.124 EMC: Sending changed local info to peer.
06:11:09:56.332 EMC: ...read processing took 0 ms, status=Success
06:11:09:56.981 EMC: ...write took 644 ms, status=Success
06:11:09:57.275 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
06:11:09:57.283 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
06:11:09:57.290 Setting CPLD activity LED mode to OR because both sides not being polled.
06:11:09:57.299 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:09:57.321 EMC: DISPLAY command success, encl number=01, mode=C.
06:11:09:57.366 EMC: Other READ PAGE change detected.
06:11:09:57.370 EMC: Sending changed local info to peer.
06:11:10:40.205 EMC: Flare polling state turned off because bad gen number 0xfe18 received; expected 0x0004.
06:11:10:40.215 EMC: Flare polling state change: self FAILED to NO, peer YES to YES
06:11:10:40.237 EMC: DISPLAY command success, encl number=01, mode=C.
06:11:10:40.930 EMC: Sending changed local info to peer.
06:11:11:54.750 EMC: Clearing state change bit.
06:11:11:54.754 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:11:54.765 EMC: Setting enclosure number to 1
06:11:11:54.784 EMC: DISPLAY command success, encl number=01, mode=C.
06:11:11:54.789 EMC: Flare assigns this enclosure number = 1, generation number = 0xd603
06:11:11:54.797 EMC: Flare polling state change: self NO to YES, peer YES to YES
06:11:11:54.805 Setting CPLD activity LED mode to AND because both sides being polled.
06:11:11:54.812 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:11:54.834 EMC: DISPLAY command success, encl number=01, mode=4.
06:11:11:54.881 EMC: Sending changed local info to peer.
06:11:12:19.921 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:12:22.156 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:12:24.406 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:12:26.671 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:12:29.046 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:12:39.445 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
06:11:12:39.468 EMC: DISPLAY command success, encl number=01, mode=4.
06:11:12:39.473 EMC: ...read processing took 29 ms, status=Success
06:11:12:40.454 Setting CPLD activity LED mode to OR because both sides not being polled.
06:11:12:42.746 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
06:11:12:42.772 EMC: DISPLAY command success, encl number=01, mode=4.
06:11:12:43.082 Setting CPLD activity LED mode to AND because both sides being polled.
06:11:16:29.801 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
06:11:16:29.807 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
06:11:16:29.816 Setting CPLD activity LED mode to OR because both sides not being polled.
06:11:16:29.826 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:16:29.860 EMC: DISPLAY command success, encl number=01, mode=C.
06:11:16:29.974 EMC: Sending changed local info to peer.
06:11:16:34.750 EMC: Flare polling state restored because good generation number 0xd603 received.
06:11:16:34.758 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
06:11:16:34.765 Setting CPLD activity LED mode to AND because both sides being polled.
06:11:16:34.773 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:16:34.796 EMC: DISPLAY command success, encl number=01, mode=4.
06:11:16:31.684 EMC: Sending changed local info to peer.
06:11:21:18.739 EMC: Detected peer upstream addr chg 50060489_703ecabf to NONE.
06:11:21:18.745 EMC: Setting state change bit.
06:11:21:22.939 EMC: Clearing state change bit.
06:11:21:23.015 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:21:23.997 EMC: Other READ PAGE change detected.
06:11:21:24.001 EMC: Setting state change bit.
06:11:21:25.240 EMC: Detected peer upstream addr chg NONE to 50060489_703ecabf.
06:11:21:26.189 EMC: Other READ PAGE change detected.
06:11:21:26.203 EMC: Clearing state change bit.
06:11:21:26.207 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:21:26.281 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:21:27.175 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
06:11:21:27.188 EMC: DISPLAY command success, encl number=01, mode=4.
06:11:21:27.487 Setting CPLD activity LED mode to OR because both sides not being polled.
06:11:22:11.634 EMC: Flare polling state change: self YES to YES, peer FAILED to NO
06:11:22:11.657 EMC: DISPLAY command success, encl number=01, mode=4.
06:11:22:11.663 EMC: ...read processing took 30 ms, status=Success
06:11:23:23.675 EMC: Flare polling state change: self YES to YES, peer NO to YES
06:11:23:23.687 EMC: DISPLAY command success, encl number=01, mode=4.
06:11:23:23.987 Setting CPLD activity LED mode to AND because both sides being polled.
06:11:23:28.437 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:25:47.343 EMC: Upstream wide port: DISCONNECTED.
06:11:25:47.389 EMC: Upstream cable phy 0 status going from READY to NOT READY
06:11:25:47.395 EMC: Upstream cable phy 1 status going from READY to NOT READY
06:11:25:47.403 EMC: Upstream cable phy 2 status going from READY to NOT READY
06:11:25:47.409 EMC: Upstream cable phy 3 status going from READY to NOT READY
06:11:25:47.416 EMC: Detected upstream addr chg 50060489_703ecaff to NONE.
06:11:25:47.424 EMC: Sending changed local info to peer.
06:11:25:48.071 EMC: Setting state change bit.
06:11:25:48.388 EMC: Setting upstream connectivity LED to FLASH because peer upstream connected but not me!
06:11:25:48.397 EMC: Expander requesting Upstream Conn LED change from ON to FLASH
06:11:25:48.404 EMC: Expander requesting Encl LED change from OFF to ON
06:11:25:48.430 EMC: UPSTREAM PORT status going from CONNECTED to UNCONNECTED
06:11:25:48.437 EMC: LED updater changing Upstream Conn LED from ON to FLASH
06:11:25:48.443 EMC: Writing LED command to MC: "L55B95555"
06:11:25:48.513 EMC: Sending changed local info to peer.
06:11:25:49.188 EMC: Other READ PAGE change detected.
06:11:25:49.522 EMC: Upstream cable phy 0 status going from NOT READY to READY
06:11:25:49.529 EMC: Upstream cable phy 1 status going from NOT READY to READY
06:11:25:49.536 EMC: Upstream cable phy 2 status going from NOT READY to READY
06:11:25:49.543 EMC: Upstream cable phy 3 status going from NOT READY to READY
06:11:25:49.551 EMC: Detected upstream addr chg NONE to 50060489_703ecaff.
06:11:25:49.557 EMC: Sending changed local info to peer.
06:11:25:50.499 EMC: Upstream wide port: CONNECTED.
06:11:25:50.503 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
06:11:25:50.510 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
06:11:25:50.518 Setting CPLD activity LED mode to OR because both sides not being polled.
06:11:25:50.527 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:25:50.550 EMC: DISPLAY command success, encl number=01, mode=C.
06:11:25:50.573 EMC: Setting upstream connectivity LED to ON because upstream connection found.
06:11:25:50.582 EMC: Expander requesting Upstream Conn LED change from FLASH to ON
06:11:25:50.589 EMC: Expander requesting Encl LED change from ON to OFF
06:11:25:50.616 EMC: UPSTREAM PORT status going from UNCONNECTED to CONNECTED
06:11:25:50.623 EMC: LED updater changing Upstream Conn LED from FLASH to ON
06:11:25:50.630 EMC: Writing LED command to MC: "L55A55555"
06:11:25:50.699 EMC: Sending changed local info to peer.
06:11:25:51.673 EMC: Other READ PAGE change detected.
06:11:26:34.168 EMC: Flare polling state turned off because bad gen number 0xfe18 received; expected 0xd603.
06:11:26:34.178 EMC: Flare polling state change: self FAILED to NO, peer YES to YES
06:11:26:34.200 EMC: DISPLAY command success, encl number=01, mode=C.
06:11:26:34.407 EMC: Sending changed local info to peer.
06:11:26:35.338 EMC: ...read processing took 0 ms, status=Success
06:11:27:46.828 EMC: Clearing state change bit.
06:11:27:46.832 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:27:46.843 EMC: Setting enclosure number to 1
06:11:27:46.857 EMC: DISPLAY command success, encl number=01, mode=C.
06:11:27:46.862 EMC: Flare assigns this enclosure number = 1, generation number = 0xe507
06:11:27:46.870 EMC: Flare polling state change: self NO to YES, peer YES to YES
06:11:27:46.878 Setting CPLD activity LED mode to AND because both sides being polled.
06:11:27:46.886 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:27:46.897 EMC: Sending changed local info to peer.
06:11:27:46.908 EMC: DISPLAY command success, encl number=01, mode=4.
06:11:28:11.484 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:28:13.843 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:28:16.015 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:28:18.281 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:28:20.671 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:12:28:31.387 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
06:12:28:31.411 EMC: DISPLAY command success, encl number=01, mode=4.
06:12:28:31.723 Setting CPLD activity LED mode to OR because both sides not being polled.
06:12:28:34.914 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
06:12:28:34.937 EMC: DISPLAY command success, encl number=01, mode=4.
06:12:28:35.243 Setting CPLD activity LED mode to AND because both sides being polled.
06:12:28:44.327 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
06:12:28:44.352 EMC: DISPLAY command success, encl number=01, mode=4.
06:12:28:44.662 Setting CPLD activity LED mode to OR because both sides not being polled.
06:12:28:45.323 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
06:12:28:45.347 EMC: DISPLAY command success, encl number=01, mode=4.
06:12:28:45.646 Setting CPLD activity LED mode to AND because both sides being polled.
06:12:30:45.390 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
06:12:30:45.398 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
06:12:30:45.406 Setting CPLD activity LED mode to OR because both sides not being polled.
06:12:30:45.417 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:12:30:45.455 EMC: DISPLAY command success, encl number=01, mode=C.
06:12:30:45.568 EMC: Sending changed local info to peer.
06:12:30:51.371 EMC: Flare polling state restored because good generation number 0xe507 received.
06:12:30:51.379 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
06:12:30:51.388 Setting CPLD activity LED mode to AND because both sides being polled.
06:12:30:51.395 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:12:30:51.419 EMC: DISPLAY command success, encl number=01, mode=4.
06:12:30:51.997 EMC: Sending changed local info to peer.
07:00:00:00.257 EMC: New Day 7
07:00:00:00.946 EMC: Resynchronizing to Flare time: 604846843 ms; timestamp adjusted to: 0 ms.
08:00:00:00.068 EMC: New Day 8
08:00:00:03.260 EMC: Resynchronizing to Flare time: 691291375 ms; timestamp adjusted to: 0 ms.
                                                                                                                                                                 

Buffer Type: SXP Trace
Buffer Id: 0
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 49th at 17:03:03.
00:00:00:01:265 EMC: Setting Update lock: 1
00:00:00:01:399 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:420 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:440 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:460 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:482 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:502 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:507 EMC: Failed to get Power Supply revision info.
00:00:00:01:514 EMC: SXP FW Version:   04.05
00:00:00:01:518 EMC: SXP BOOT Version: 03.00
00:00:00:01:522 EMC: SXP ISTR Version: 03.05
00:00:00:01:526 EMC: MC Version:       16.01
00:00:00:01:531 EMC: DLMC Version:     14.47
00:00:00:01:535 EMC: PS Version:       00.01
00:00:00:01:539 EMC: CPLD Version:     00.09
00:00:00:01:543 EMC: Base SAS Address: 50060480_00b680c0
00:00:00:01:548 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:557 EMC: Exception flag read from register is 0
00:00:00:00:985 EMC: Setting enclosure number to 255
00:00:00:01:005 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:01:026 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:049 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:069 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:090 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:112 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:119 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:142 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:165 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:185 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:239 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:259 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:265 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:287 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:308 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:330 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:350 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:370 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:375 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:383 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:01:389 EMC: Checking for updated FW!
00:00:00:01:393 EMC: Checking for SXP FW download
00:00:00:01:420 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:01:435 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:01:440 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:15:669 WDG EXPIRED: Elapsed time since last WDG run: 799 ms
00:00:00:15:674 WDG: Pong not received from: EMA
                                              

Buffer Type: SXP Trace
Buffer Id: 1
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 946
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:15.7
00:00:00:01:264 EMC: Setting Update lock: 1
00:00:00:01:350 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:384 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:404 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:424 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:445 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:467 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:472 EMC: Failed to get Power Supply revision info.
00:00:00:01:478 EMC: SXP FW Version:   04.05
00:00:00:01:483 EMC: SXP BOOT Version: 03.00
00:00:00:01:487 EMC: SXP ISTR Version: 03.05
00:00:00:01:491 EMC: MC Version:       16.01
00:00:00:01:497 EMC: DLMC Version:     14.47
00:00:00:01:501 EMC: PS Version:       00.01
00:00:00:01:505 EMC: CPLD Version:     00.13
00:00:00:15:768 WDG EXPIRED: Elapsed time since last WDG run: 229 ms
00:00:00:15:773 WDG: Pong not received from: EMA
                 

Buffer Type: SXP Trace
Buffer Id: 2
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:51.
00:00:00:01:263 EMC: Setting Update lock: 1
00:00:00:01:349 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:382 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:402 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:423 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:443 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:465 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:470 EMC: Failed to get Power Supply revision info.
00:00:00:01:476 EMC: SXP FW Version:   04.05
00:00:00:01:481 EMC: SXP BOOT Version: 03.00
00:00:00:01:485 EMC: SXP ISTR Version: 03.05
00:00:00:01:489 EMC: MC Version:       16.01
00:00:00:01:493 EMC: DLMC Version:     14.47
00:00:00:01:498 EMC: PS Version:       00.01
00:00:00:01:502 EMC: CPLD Version:     00.13
00:00:00:01:506 EMC: Base SAS Address: 50060480_00fa80c0
00:00:00:01:510 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:520 EMC: Exception flag read from register is 1
00:00:00:36:984 EMC: Setting enclosure number to 255
00:00:00:37:003 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:37:046 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:068 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:089 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:109 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:130 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:136 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:160 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:183 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:204 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:225 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:269 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:274 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:298 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:321 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:342 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:363 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:385 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:390 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:397 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:37:404 EMC: Checking for updated FW!
00:00:00:37:408 EMC: Checking for SXP FW download
00:00:00:37:436 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:37:451 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:37:456 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:51:683 WDG EXPIRED: Elapsed time since last WDG run: 792 ms
00:00:00:51:688 WDG: Pong not received from: EMA
                                              

Buffer Type: Expander Ring Buffer Trace
Buffer Id: 255
Source: Manual
SXP Major Rev: 04
SXP Minor Rev: 30
Length: -1
Timestamp: 08/15/2010 00:30:28
        
06:11:16:29.816 Setting CPLD activity LED mode to OR because both sides not being polled.
06:11:16:29.826 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:16:29.860 EMC: DISPLAY command success, encl number=01, mode=C.
06:11:16:29.974 EMC: Sending changed local info to peer.
06:11:16:34.750 EMC: Flare polling state restored because good generation number 0xd603 received.
06:11:16:34.758 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
06:11:16:34.765 Setting CPLD activity LED mode to AND because both sides being polled.
06:11:16:34.773 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:16:34.796 EMC: DISPLAY command success, encl number=01, mode=4.
06:11:16:31.684 EMC: Sending changed local info to peer.
06:11:21:18.739 EMC: Detected peer upstream addr chg 50060489_703ecabf to NONE.
06:11:21:18.745 EMC: Setting state change bit.
06:11:21:22.939 EMC: Clearing state change bit.
06:11:21:23.015 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:21:23.997 EMC: Other READ PAGE change detected.
06:11:21:24.001 EMC: Setting state change bit.
06:11:21:25.240 EMC: Detected peer upstream addr chg NONE to 50060489_703ecabf.
06:11:21:26.189 EMC: Other READ PAGE change detected.
06:11:21:26.203 EMC: Clearing state change bit.
06:11:21:26.207 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:21:26.281 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:21:27.175 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
06:11:21:27.188 EMC: DISPLAY command success, encl number=01, mode=4.
06:11:21:27.487 Setting CPLD activity LED mode to OR because both sides not being polled.
06:11:22:11.634 EMC: Flare polling state change: self YES to YES, peer FAILED to NO
06:11:22:11.657 EMC: DISPLAY command success, encl number=01, mode=4.
06:11:22:11.663 EMC: ...read processing took 30 ms, status=Success
06:11:23:23.675 EMC: Flare polling state change: self YES to YES, peer NO to YES
06:11:23:23.687 EMC: DISPLAY command success, encl number=01, mode=4.
06:11:23:23.987 Setting CPLD activity LED mode to AND because both sides being polled.
06:11:23:28.437 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:25:47.343 EMC: Upstream wide port: DISCONNECTED.
06:11:25:47.389 EMC: Upstream cable phy 0 status going from READY to NOT READY
06:11:25:47.395 EMC: Upstream cable phy 1 status going from READY to NOT READY
06:11:25:47.403 EMC: Upstream cable phy 2 status going from READY to NOT READY
06:11:25:47.409 EMC: Upstream cable phy 3 status going from READY to NOT READY
06:11:25:47.416 EMC: Detected upstream addr chg 50060489_703ecaff to NONE.
06:11:25:47.424 EMC: Sending changed local info to peer.
06:11:25:48.071 EMC: Setting state change bit.
06:11:25:48.388 EMC: Setting upstream connectivity LED to FLASH because peer upstream connected but not me!
06:11:25:48.397 EMC: Expander requesting Upstream Conn LED change from ON to FLASH
06:11:25:48.404 EMC: Expander requesting Encl LED change from OFF to ON
06:11:25:48.430 EMC: UPSTREAM PORT status going from CONNECTED to UNCONNECTED
06:11:25:48.437 EMC: LED updater changing Upstream Conn LED from ON to FLASH
06:11:25:48.443 EMC: Writing LED command to MC: "L55B95555"
06:11:25:48.513 EMC: Sending changed local info to peer.
06:11:25:49.188 EMC: Other READ PAGE change detected.
06:11:25:49.522 EMC: Upstream cable phy 0 status going from NOT READY to READY
06:11:25:49.529 EMC: Upstream cable phy 1 status going from NOT READY to READY
06:11:25:49.536 EMC: Upstream cable phy 2 status going from NOT READY to READY
06:11:25:49.543 EMC: Upstream cable phy 3 status going from NOT READY to READY
06:11:25:49.551 EMC: Detected upstream addr chg NONE to 50060489_703ecaff.
06:11:25:49.557 EMC: Sending changed local info to peer.
06:11:25:50.499 EMC: Upstream wide port: CONNECTED.
06:11:25:50.503 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
06:11:25:50.510 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
06:11:25:50.518 Setting CPLD activity LED mode to OR because both sides not being polled.
06:11:25:50.527 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:25:50.550 EMC: DISPLAY command success, encl number=01, mode=C.
06:11:25:50.573 EMC: Setting upstream connectivity LED to ON because upstream connection found.
06:11:25:50.582 EMC: Expander requesting Upstream Conn LED change from FLASH to ON
06:11:25:50.589 EMC: Expander requesting Encl LED change from ON to OFF
06:11:25:50.616 EMC: UPSTREAM PORT status going from UNCONNECTED to CONNECTED
06:11:25:50.623 EMC: LED updater changing Upstream Conn LED from FLASH to ON
06:11:25:50.630 EMC: Writing LED command to MC: "L55A55555"
06:11:25:50.699 EMC: Sending changed local info to peer.
06:11:25:51.673 EMC: Other READ PAGE change detected.
06:11:26:34.168 EMC: Flare polling state turned off because bad gen number 0xfe18 received; expected 0xd603.
06:11:26:34.178 EMC: Flare polling state change: self FAILED to NO, peer YES to YES
06:11:26:34.200 EMC: DISPLAY command success, encl number=01, mode=C.
06:11:26:34.407 EMC: Sending changed local info to peer.
06:11:26:35.338 EMC: ...read processing took 0 ms, status=Success
06:11:27:46.828 EMC: Clearing state change bit.
06:11:27:46.832 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:27:46.843 EMC: Setting enclosure number to 1
06:11:27:46.857 EMC: DISPLAY command success, encl number=01, mode=C.
06:11:27:46.862 EMC: Flare assigns this enclosure number = 1, generation number = 0xe507
06:11:27:46.870 EMC: Flare polling state change: self NO to YES, peer YES to YES
06:11:27:46.878 Setting CPLD activity LED mode to AND because both sides being polled.
06:11:27:46.886 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:27:46.897 EMC: Sending changed local info to peer.
06:11:27:46.908 EMC: DISPLAY command success, encl number=01, mode=4.
06:11:28:11.484 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:28:13.843 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:28:16.015 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:28:18.281 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:11:28:20.671 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:12:28:31.387 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
06:12:28:31.411 EMC: DISPLAY command success, encl number=01, mode=4.
06:12:28:31.723 Setting CPLD activity LED mode to OR because both sides not being polled.
06:12:28:34.914 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
06:12:28:34.937 EMC: DISPLAY command success, encl number=01, mode=4.
06:12:28:35.243 Setting CPLD activity LED mode to AND because both sides being polled.
06:12:28:44.327 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
06:12:28:44.352 EMC: DISPLAY command success, encl number=01, mode=4.
06:12:28:44.662 Setting CPLD activity LED mode to OR because both sides not being polled.
06:12:28:45.323 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
06:12:28:45.347 EMC: DISPLAY command success, encl number=01, mode=4.
06:12:28:45.646 Setting CPLD activity LED mode to AND because both sides being polled.
06:12:30:45.390 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
06:12:30:45.398 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
06:12:30:45.406 Setting CPLD activity LED mode to OR because both sides not being polled.
06:12:30:45.417 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:12:30:45.455 EMC: DISPLAY command success, encl number=01, mode=C.
06:12:30:45.568 EMC: Sending changed local info to peer.
06:12:30:51.371 EMC: Flare polling state restored because good generation number 0xe507 received.
06:12:30:51.379 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
06:12:30:51.388 Setting CPLD activity LED mode to AND because both sides being polled.
06:12:30:51.395 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:12:30:51.419 EMC: DISPLAY command success, encl number=01, mode=4.
06:12:30:51.997 EMC: Sending changed local info to peer.
07:00:00:00.257 EMC: New Day 7
07:00:00:00.946 EMC: Resynchronizing to Flare time: 604846843 ms; timestamp adjusted to: 0 ms.
08:00:00:00.068 EMC: New Day 8
08:00:00:03.260 EMC: Resynchronizing to Flare time: 691291375 ms; timestamp adjusted to: 0 ms.
09:00:00:00.310 EMC: New Day 9
09:00:00:02.448 EMC: Resynchronizing to Flare time: 777689984 ms; timestamp adjusted to: 0 ms.
09:07:23:08.513 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
09:07:23:08.521 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
09:07:23:08.528 Setting CPLD activity LED mode to OR because both sides not being polled.
09:07:23:08.537 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
09:07:23:08.559 EMC: DISPLAY command success, encl number=01, mode=C.
09:07:23:08.605 EMC: Sending changed local info to peer.
09:07:23:11.791 EMC: Flare polling state restored because good generation number 0xe507 received.
09:07:23:11.799 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
09:07:23:11.806 Setting CPLD activity LED mode to AND because both sides being polled.
09:07:23:11.814 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
09:07:23:11.837 EMC: DISPLAY command success, encl number=01, mode=4.
09:07:23:11.861 EMC: Resynchronizing to Flare time: 804218875 ms; timestamp adjusted to: 0 ms.
09:07:23:39.109 EMC: Sending changed local info to peer.
10:00:00:00.047 EMC: New Day 10
10:00:00:00.940 EMC: Resynchronizing to Flare time: 864062312 ms; timestamp adjusted to: 0 ms.
11:00:00:00.324 EMC: New Day 11
11:00:00:01.105 EMC: Resynchronizing to Flare time: 950490437 ms; timestamp adjusted to: 0 ms.
12:00:00:00.152 EMC: New Day 12
12:00:00:03.131 EMC: Resynchronizing to Flare time: 1036892343 ms; timestamp adjusted to: 0 ms.
13:00:00:00.309 EMC: New Day 13
13:00:00:02.552 EMC: Resynchronizing to Flare time: 1123290906 ms; timestamp adjusted to: 0 ms.
14:00:00:00.165 EMC: New Day 14
14:00:00:01.886 EMC: Resynchronizing to Flare time: 1209689500 ms; timestamp adjusted to: 0 ms.
14:22:41:36.569 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
14:22:41:36.575 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
14:22:41:36.583 Setting CPLD activity LED mode to OR because both sides not being polled.
14:22:41:36.592 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
14:22:41:36.615 EMC: DISPLAY command success, encl number=01, mode=C.
14:22:41:36.658 EMC: Sending changed local info to peer.
14:22:41:39.849 EMC: Flare polling state restored because good generation number 0xe507 received.
14:22:41:39.857 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
14:22:41:39.864 Setting CPLD activity LED mode to AND because both sides being polled.
14:22:41:39.872 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
14:22:41:39.907 EMC: DISPLAY command success, encl number=01, mode=4.
14:22:41:39.941 EMC: Resynchronizing to Flare time: 1291382781 ms; timestamp adjusted to: 0 ms.
14:22:43:02.829 EMC: Sending changed local info to peer.
15:00:00:00.124 EMC: New Day 15
15:00:28:30.702 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
15:00:28:30.728 EMC: DISPLAY command success, encl number=01, mode=4.
15:00:28:31.038 Setting CPLD activity LED mode to OR because both sides not being polled.
15:00:28:34.305 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
15:00:28:34.329 EMC: DISPLAY command success, encl number=01, mode=4.
15:00:28:34.639 Setting CPLD activity LED mode to AND because both sides being polled.
                                                                                                                                                                 

Buffer Type: SXP Trace
Buffer Id: 0
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 49th at 17:03:03.
00:00:00:01:265 EMC: Setting Update lock: 1
00:00:00:01:399 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:420 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:440 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:460 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:482 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:502 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:507 EMC: Failed to get Power Supply revision info.
00:00:00:01:514 EMC: SXP FW Version:   04.05
00:00:00:01:518 EMC: SXP BOOT Version: 03.00
00:00:00:01:522 EMC: SXP ISTR Version: 03.05
00:00:00:01:526 EMC: MC Version:       16.01
00:00:00:01:531 EMC: DLMC Version:     14.47
00:00:00:01:535 EMC: PS Version:       00.01
00:00:00:01:539 EMC: CPLD Version:     00.09
00:00:00:01:543 EMC: Base SAS Address: 50060480_00b680c0
00:00:00:01:548 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:557 EMC: Exception flag read from register is 0
00:00:00:00:985 EMC: Setting enclosure number to 255
00:00:00:01:005 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:01:026 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:049 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:069 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:090 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:112 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:119 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:142 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:165 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:185 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:239 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:259 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:265 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:287 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:308 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:330 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:350 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:370 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:375 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:383 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:01:389 EMC: Checking for updated FW!
00:00:00:01:393 EMC: Checking for SXP FW download
00:00:00:01:420 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:01:435 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:01:440 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:15:669 WDG EXPIRED: Elapsed time since last WDG run: 799 ms
00:00:00:15:674 WDG: Pong not received from: EMA
                                              

Buffer Type: SXP Trace
Buffer Id: 1
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 946
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:15.7
00:00:00:01:264 EMC: Setting Update lock: 1
00:00:00:01:350 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:384 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:404 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:424 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:445 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:467 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:472 EMC: Failed to get Power Supply revision info.
00:00:00:01:478 EMC: SXP FW Version:   04.05
00:00:00:01:483 EMC: SXP BOOT Version: 03.00
00:00:00:01:487 EMC: SXP ISTR Version: 03.05
00:00:00:01:491 EMC: MC Version:       16.01
00:00:00:01:497 EMC: DLMC Version:     14.47
00:00:00:01:501 EMC: PS Version:       00.01
00:00:00:01:505 EMC: CPLD Version:     00.13
00:00:00:15:768 WDG EXPIRED: Elapsed time since last WDG run: 229 ms
00:00:00:15:773 WDG: Pong not received from: EMA
                 

Buffer Type: SXP Trace
Buffer Id: 2
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:51.
00:00:00:01:263 EMC: Setting Update lock: 1
00:00:00:01:349 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:382 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:402 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:423 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:443 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:465 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:470 EMC: Failed to get Power Supply revision info.
00:00:00:01:476 EMC: SXP FW Version:   04.05
00:00:00:01:481 EMC: SXP BOOT Version: 03.00
00:00:00:01:485 EMC: SXP ISTR Version: 03.05
00:00:00:01:489 EMC: MC Version:       16.01
00:00:00:01:493 EMC: DLMC Version:     14.47
00:00:00:01:498 EMC: PS Version:       00.01
00:00:00:01:502 EMC: CPLD Version:     00.13
00:00:00:01:506 EMC: Base SAS Address: 50060480_00fa80c0
00:00:00:01:510 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:520 EMC: Exception flag read from register is 1
00:00:00:36:984 EMC: Setting enclosure number to 255
00:00:00:37:003 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:37:046 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:068 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:089 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:109 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:130 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:136 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:160 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:183 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:204 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:225 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:269 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:274 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:298 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:321 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:342 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:363 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:385 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:390 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:397 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:37:404 EMC: Checking for updated FW!
00:00:00:37:408 EMC: Checking for SXP FW download
00:00:00:37:436 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:37:451 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:37:456 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:51:683 WDG EXPIRED: Elapsed time since last WDG run: 792 ms
00:00:00:51:688 WDG: Pong not received from: EMA
                                              

Buffer Type: Expander Ring Buffer Trace
Buffer Id: 255
Source: Manual
SXP Major Rev: 04
SXP Minor Rev: 30
Length: -1
Timestamp: 09/27/2010 06:07:34
        
27:14:38:04.069 EMC: Sending changed local info to peer.
27:14:38:07.251 EMC: Flare polling state restored because good generation number 0xe507 received.
27:14:38:07.260 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
27:14:38:07.267 Setting CPLD activity LED mode to AND because both sides being polled.
27:14:38:07.275 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
27:14:38:07.312 EMC: DISPLAY command success, encl number=01, mode=4.
27:14:38:07.332 EMC: Sending changed local info to peer.
27:14:38:07.346 EMC: Resynchronizing to Flare time: 2385541843 ms; timestamp adjusted to: 0 ms.
27:14:39:02.311 EMC: ...read processing took 0 ms, status=Success
28:00:00:00.170 EMC: New Day 28
28:00:00:01.954 EMC: Resynchronizing to Flare time: 2419237000 ms; timestamp adjusted to: 0 ms.
29:00:00:00.024 EMC: New Day 29
29:00:00:02.094 EMC: Resynchronizing to Flare time: 2505691390 ms; timestamp adjusted to: 0 ms.
30:00:00:00.146 EMC: New Day 30
30:00:00:01.446 EMC: Resynchronizing to Flare time: 2592090000 ms; timestamp adjusted to: 0 ms.
31:00:00:00.131 EMC: New Day 31
31:00:00:01.045 EMC: Resynchronizing to Flare time: 2678488562 ms; timestamp adjusted to: 0 ms.
32:00:00:00.071 EMC: New Day 32
32:00:00:02.672 EMC: Year 2010, Month 9
32:00:00:02.713 EMC: Resynchronizing to Flare time: 86490437 ms; timestamp adjusted to: 0 ms.
01:23:15:09.056 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
01:23:15:09.063 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
01:23:15:09.070 Setting CPLD activity LED mode to OR because both sides not being polled.
01:23:15:09.079 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
01:23:15:09.101 EMC: DISPLAY command success, encl number=01, mode=C.
01:23:15:09.147 EMC: Sending changed local info to peer.
01:23:15:12.331 EMC: Flare polling state restored because good generation number 0xe507 received.
01:23:15:12.339 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
01:23:15:12.346 Setting CPLD activity LED mode to AND because both sides being polled.
01:23:15:12.354 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
01:23:15:12.374 EMC: Sending changed local info to peer.
01:23:15:12.386 EMC: DISPLAY command success, encl number=01, mode=4.
01:23:15:12.429 EMC: Resynchronizing to Flare time: 170198406 ms; timestamp adjusted to: 0 ms.
02:00:00:00.219 EMC: New Day 2
03:00:00:00.117 EMC: New Day 3
03:00:00:01.412 EMC: Resynchronizing to Flare time: 259290921 ms; timestamp adjusted to: 0 ms.
04:00:00:00.207 EMC: New Day 4
04:00:00:00.563 EMC: Resynchronizing to Flare time: 345689500 ms; timestamp adjusted to: 0 ms.
05:00:00:00.099 EMC: New Day 5
05:00:00:00.448 EMC: Resynchronizing to Flare time: 432088093 ms; timestamp adjusted to: 0 ms.
06:00:00:00.077 EMC: New Day 6
06:00:00:02.879 EMC: Resynchronizing to Flare time: 518490000 ms; timestamp adjusted to: 0 ms.
06:10:07:32.004 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
06:10:07:32.012 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
06:10:07:32.019 Setting CPLD activity LED mode to OR because both sides not being polled.
06:10:07:32.028 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:07:32.039 EMC: DISPLAY command success, encl number=01, mode=C.
06:10:07:32.082 EMC: Sending changed local info to peer.
06:10:07:35.282 EMC: Flare polling state restored because good generation number 0xe507 received.
06:10:07:35.290 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
06:10:07:35.297 Setting CPLD activity LED mode to AND because both sides being polled.
06:10:07:35.306 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:07:35.330 EMC: DISPLAY command success, encl number=01, mode=4.
06:10:07:35.353 EMC: Resynchronizing to Flare time: 554892156 ms; timestamp adjusted to: 0 ms.
06:10:08:12.431 EMC: Sending changed local info to peer.
07:00:00:00.059 EMC: New Day 7
07:00:00:01.353 EMC: Resynchronizing to Flare time: 604852468 ms; timestamp adjusted to: 0 ms.
08:00:00:00.308 EMC: New Day 8
08:00:00:01.413 EMC: Resynchronizing to Flare time: 691290437 ms; timestamp adjusted to: 0 ms.
08:00:35:39.072 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
08:00:35:39.079 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
08:00:35:39.086 Setting CPLD activity LED mode to OR because both sides not being polled.
08:00:35:39.096 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
08:00:35:39.118 EMC: DISPLAY command success, encl number=01, mode=C.
08:00:35:39.165 EMC: Sending changed local info to peer.
08:00:35:42.351 EMC: Flare polling state restored because good generation number 0xe507 received.
08:00:35:42.359 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
08:00:35:42.366 Setting CPLD activity LED mode to AND because both sides being polled.
08:00:35:42.373 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
08:00:35:42.396 EMC: DISPLAY command success, encl number=01, mode=4.
08:00:35:44.554 EMC: Sending changed local info to peer.
08:11:05:15.093 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
08:11:05:15.101 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
08:11:05:15.108 Setting CPLD activity LED mode to OR because both sides not being polled.
08:11:05:15.117 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
08:11:05:15.139 EMC: DISPLAY command success, encl number=01, mode=C.
08:11:05:15.184 EMC: Sending changed local info to peer.
08:11:05:18.370 EMC: Flare polling state restored because good generation number 0xe507 received.
08:11:05:18.378 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
08:11:05:18.385 Setting CPLD activity LED mode to AND because both sides being polled.
08:11:05:18.392 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
08:11:05:18.427 EMC: DISPLAY command success, encl number=01, mode=4.
08:11:05:18.447 EMC: Sending changed local info to peer.
08:11:05:18.461 EMC: Resynchronizing to Flare time: 731157625 ms; timestamp adjusted to: 0 ms.
09:00:00:00.130 EMC: New Day 9
09:00:00:01.496 EMC: Resynchronizing to Flare time: 777649656 ms; timestamp adjusted to: 0 ms.
10:00:00:00.037 EMC: New Day 10
10:00:00:01.802 EMC: Resynchronizing to Flare time: 864090937 ms; timestamp adjusted to: 0 ms.
11:00:00:00.048 EMC: New Day 11
11:00:00:01.059 EMC: Resynchronizing to Flare time: 950489500 ms; timestamp adjusted to: 0 ms.
12:00:00:00.235 EMC: New Day 12
12:00:00:03.516 EMC: Resynchronizing to Flare time: 1036891375 ms; timestamp adjusted to: 0 ms.
12:01:51:10.154 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
12:01:51:10.161 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
12:01:51:10.168 Setting CPLD activity LED mode to OR because both sides not being polled.
12:01:51:10.178 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
12:01:51:10.200 EMC: DISPLAY command success, encl number=01, mode=C.
12:01:51:10.246 EMC: Sending changed local info to peer.
12:01:51:13.429 EMC: Flare polling state restored because good generation number 0xe507 received.
12:01:51:13.438 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
12:01:51:13.445 Setting CPLD activity LED mode to AND because both sides being polled.
12:01:51:13.453 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
12:01:51:13.488 EMC: DISPLAY command success, encl number=01, mode=4.
12:01:51:13.508 EMC: Sending changed local info to peer.
12:01:51:13.522 EMC: Resynchronizing to Flare time: 1043480125 ms; timestamp adjusted to: 0 ms.
13:00:00:00.005 EMC: New Day 13
13:00:00:02.098 EMC: Resynchronizing to Flare time: 1123283406 ms; timestamp adjusted to: 0 ms.
14:00:00:00.109 EMC: New Day 14
14:00:00:02.335 EMC: Resynchronizing to Flare time: 1209691843 ms; timestamp adjusted to: 0 ms.
15:00:00:00.440 EMC: New Day 15
15:00:00:00.666 EMC: Resynchronizing to Flare time: 1296090437 ms; timestamp adjusted to: 0 ms.
16:00:00:00.002 EMC: New Day 16
16:00:00:00.342 EMC: Resynchronizing to Flare time: 1382489031 ms; timestamp adjusted to: 0 ms.
16:04:21:27.865 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
16:04:21:27.877 EMC: DISPLAY command success, encl number=01, mode=4.
16:04:21:28.190 Setting CPLD activity LED mode to OR because both sides not being polled.
16:04:21:31.092 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
16:04:21:31.116 EMC: DISPLAY command success, encl number=01, mode=4.
16:04:21:31.429 Setting CPLD activity LED mode to AND because both sides being polled.
17:00:00:00.025 EMC: New Day 17
17:00:00:02.993 EMC: Resynchronizing to Flare time: 1468890906 ms; timestamp adjusted to: 0 ms.
17:00:31:07.551 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
17:00:31:07.558 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
17:00:31:07.565 Setting CPLD activity LED mode to OR because both sides not being polled.
17:00:31:07.574 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
17:00:31:07.597 EMC: DISPLAY command success, encl number=01, mode=C.
17:00:31:07.643 EMC: Sending changed local info to peer.
17:00:31:10.828 EMC: Flare polling state restored because good generation number 0xe507 received.
17:00:31:10.835 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
17:00:31:10.844 Setting CPLD activity LED mode to AND because both sides being polled.
17:00:31:10.851 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
17:00:31:10.871 EMC: Sending changed local info to peer.
17:00:31:10.881 EMC: DISPLAY command success, encl number=01, mode=4.
18:00:00:00.133 EMC: New Day 18
18:00:00:00.168 EMC: Resynchronizing to Flare time: 1555286218 ms; timestamp adjusted to: 0 ms.
19:00:00:00.233 EMC: New Day 19
19:00:00:02.715 EMC: Resynchronizing to Flare time: 1641691406 ms; timestamp adjusted to: 0 ms.
20:00:00:00.020 EMC: New Day 20
20:00:00:00.461 EMC: Resynchronizing to Flare time: 1728089968 ms; timestamp adjusted to: 0 ms.
21:00:00:00.031 EMC: New Day 21
21:00:00:02.744 EMC: Resynchronizing to Flare time: 1814491875 ms; timestamp adjusted to: 0 ms.
21:08:27:31.677 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
21:08:27:31.699 EMC: DISPLAY command success, encl number=01, mode=4.
21:08:27:32.009 Setting CPLD activity LED mode to OR because both sides not being polled.
21:08:27:35.008 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
21:08:27:35.031 EMC: DISPLAY command success, encl number=01, mode=4.
21:08:27:35.037 EMC: ...read processing took 30 ms, status=Success
21:08:27:36.016 Setting CPLD activity LED mode to AND because both sides being polled.
22:00:00:00.114 EMC: New Day 22
22:00:00:02.257 EMC: Resynchronizing to Flare time: 1900890437 ms; timestamp adjusted to: 0 ms.
23:00:00:00.711 EMC: New Day 23
23:00:00:01.676 EMC: Resynchronizing to Flare time: 1987289031 ms; timestamp adjusted to: 0 ms.
24:00:00:00.089 EMC: New Day 24
24:00:00:03.105 EMC: Resynchronizing to Flare time: 2073690906 ms; timestamp adjusted to: 0 ms.
25:00:00:00.407 EMC: New Day 25
25:00:00:03.747 EMC: Resynchronizing to Flare time: 2160092812 ms; timestamp adjusted to: 0 ms.
26:00:00:00.072 EMC: New Day 26
26:00:00:02.249 EMC: Resynchronizing to Flare time: 2246491390 ms; timestamp adjusted to: 0 ms.
27:00:00:00.219 EMC: New Day 27
27:00:00:01.101 EMC: Resynchronizing to Flare time: 2332889968 ms; timestamp adjusted to: 0 ms.
                                                                                                                                                                 

Buffer Type: SXP Trace
Buffer Id: 0
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 49th at 17:03:03.
00:00:00:01:265 EMC: Setting Update lock: 1
00:00:00:01:399 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:420 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:440 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:460 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:482 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:502 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:507 EMC: Failed to get Power Supply revision info.
00:00:00:01:514 EMC: SXP FW Version:   04.05
00:00:00:01:518 EMC: SXP BOOT Version: 03.00
00:00:00:01:522 EMC: SXP ISTR Version: 03.05
00:00:00:01:526 EMC: MC Version:       16.01
00:00:00:01:531 EMC: DLMC Version:     14.47
00:00:00:01:535 EMC: PS Version:       00.01
00:00:00:01:539 EMC: CPLD Version:     00.09
00:00:00:01:543 EMC: Base SAS Address: 50060480_00b680c0
00:00:00:01:548 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:557 EMC: Exception flag read from register is 0
00:00:00:00:985 EMC: Setting enclosure number to 255
00:00:00:01:005 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:01:026 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:049 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:069 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:090 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:112 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:119 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:142 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:165 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:185 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:239 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:259 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:265 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:287 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:308 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:330 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:350 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:370 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:375 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:383 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:01:389 EMC: Checking for updated FW!
00:00:00:01:393 EMC: Checking for SXP FW download
00:00:00:01:420 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:01:435 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:01:440 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:15:669 WDG EXPIRED: Elapsed time since last WDG run: 799 ms
00:00:00:15:674 WDG: Pong not received from: EMA
                                              

Buffer Type: SXP Trace
Buffer Id: 1
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 946
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:15.7
00:00:00:01:264 EMC: Setting Update lock: 1
00:00:00:01:350 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:384 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:404 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:424 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:445 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:467 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:472 EMC: Failed to get Power Supply revision info.
00:00:00:01:478 EMC: SXP FW Version:   04.05
00:00:00:01:483 EMC: SXP BOOT Version: 03.00
00:00:00:01:487 EMC: SXP ISTR Version: 03.05
00:00:00:01:491 EMC: MC Version:       16.01
00:00:00:01:497 EMC: DLMC Version:     14.47
00:00:00:01:501 EMC: PS Version:       00.01
00:00:00:01:505 EMC: CPLD Version:     00.13
00:00:00:15:768 WDG EXPIRED: Elapsed time since last WDG run: 229 ms
00:00:00:15:773 WDG: Pong not received from: EMA
                 

Buffer Type: SXP Trace
Buffer Id: 2
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:51.
00:00:00:01:263 EMC: Setting Update lock: 1
00:00:00:01:349 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:382 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:402 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:423 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:443 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:465 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:470 EMC: Failed to get Power Supply revision info.
00:00:00:01:476 EMC: SXP FW Version:   04.05
00:00:00:01:481 EMC: SXP BOOT Version: 03.00
00:00:00:01:485 EMC: SXP ISTR Version: 03.05
00:00:00:01:489 EMC: MC Version:       16.01
00:00:00:01:493 EMC: DLMC Version:     14.47
00:00:00:01:498 EMC: PS Version:       00.01
00:00:00:01:502 EMC: CPLD Version:     00.13
00:00:00:01:506 EMC: Base SAS Address: 50060480_00fa80c0
00:00:00:01:510 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:520 EMC: Exception flag read from register is 1
00:00:00:36:984 EMC: Setting enclosure number to 255
00:00:00:37:003 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:37:046 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:068 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:089 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:109 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:130 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:136 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:160 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:183 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:204 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:225 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:269 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:274 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:298 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:321 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:342 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:363 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:385 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:390 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:397 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:37:404 EMC: Checking for updated FW!
00:00:00:37:408 EMC: Checking for SXP FW download
00:00:00:37:436 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:37:451 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:37:456 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:51:683 WDG EXPIRED: Elapsed time since last WDG run: 792 ms
00:00:00:51:688 WDG: Pong not received from: EMA
                                              

Buffer Type: Expander Ring Buffer Trace
Buffer Id: 255
Source: Manual
SXP Major Rev: 04
SXP Minor Rev: 30
Length: -1
Timestamp: 09/27/2010 06:30:34
        
30:00:00:00.146 EMC: New Day 30
30:00:00:01.446 EMC: Resynchronizing to Flare time: 2592090000 ms; timestamp adjusted to: 0 ms.
31:00:00:00.131 EMC: New Day 31
31:00:00:01.045 EMC: Resynchronizing to Flare time: 2678488562 ms; timestamp adjusted to: 0 ms.
32:00:00:00.071 EMC: New Day 32
32:00:00:02.672 EMC: Year 2010, Month 9
32:00:00:02.713 EMC: Resynchronizing to Flare time: 86490437 ms; timestamp adjusted to: 0 ms.
01:23:15:09.056 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
01:23:15:09.063 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
01:23:15:09.070 Setting CPLD activity LED mode to OR because both sides not being polled.
01:23:15:09.079 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
01:23:15:09.101 EMC: DISPLAY command success, encl number=01, mode=C.
01:23:15:09.147 EMC: Sending changed local info to peer.
01:23:15:12.331 EMC: Flare polling state restored because good generation number 0xe507 received.
01:23:15:12.339 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
01:23:15:12.346 Setting CPLD activity LED mode to AND because both sides being polled.
01:23:15:12.354 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
01:23:15:12.374 EMC: Sending changed local info to peer.
01:23:15:12.386 EMC: DISPLAY command success, encl number=01, mode=4.
01:23:15:12.429 EMC: Resynchronizing to Flare time: 170198406 ms; timestamp adjusted to: 0 ms.
02:00:00:00.219 EMC: New Day 2
03:00:00:00.117 EMC: New Day 3
03:00:00:01.412 EMC: Resynchronizing to Flare time: 259290921 ms; timestamp adjusted to: 0 ms.
04:00:00:00.207 EMC: New Day 4
04:00:00:00.563 EMC: Resynchronizing to Flare time: 345689500 ms; timestamp adjusted to: 0 ms.
05:00:00:00.099 EMC: New Day 5
05:00:00:00.448 EMC: Resynchronizing to Flare time: 432088093 ms; timestamp adjusted to: 0 ms.
06:00:00:00.077 EMC: New Day 6
06:00:00:02.879 EMC: Resynchronizing to Flare time: 518490000 ms; timestamp adjusted to: 0 ms.
06:10:07:32.004 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
06:10:07:32.012 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
06:10:07:32.019 Setting CPLD activity LED mode to OR because both sides not being polled.
06:10:07:32.028 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:07:32.039 EMC: DISPLAY command success, encl number=01, mode=C.
06:10:07:32.082 EMC: Sending changed local info to peer.
06:10:07:35.282 EMC: Flare polling state restored because good generation number 0xe507 received.
06:10:07:35.290 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
06:10:07:35.297 Setting CPLD activity LED mode to AND because both sides being polled.
06:10:07:35.306 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:10:07:35.330 EMC: DISPLAY command success, encl number=01, mode=4.
06:10:07:35.353 EMC: Resynchronizing to Flare time: 554892156 ms; timestamp adjusted to: 0 ms.
06:10:08:12.431 EMC: Sending changed local info to peer.
07:00:00:00.059 EMC: New Day 7
07:00:00:01.353 EMC: Resynchronizing to Flare time: 604852468 ms; timestamp adjusted to: 0 ms.
08:00:00:00.308 EMC: New Day 8
08:00:00:01.413 EMC: Resynchronizing to Flare time: 691290437 ms; timestamp adjusted to: 0 ms.
08:00:35:39.072 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
08:00:35:39.079 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
08:00:35:39.086 Setting CPLD activity LED mode to OR because both sides not being polled.
08:00:35:39.096 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
08:00:35:39.118 EMC: DISPLAY command success, encl number=01, mode=C.
08:00:35:39.165 EMC: Sending changed local info to peer.
08:00:35:42.351 EMC: Flare polling state restored because good generation number 0xe507 received.
08:00:35:42.359 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
08:00:35:42.366 Setting CPLD activity LED mode to AND because both sides being polled.
08:00:35:42.373 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
08:00:35:42.396 EMC: DISPLAY command success, encl number=01, mode=4.
08:00:35:44.554 EMC: Sending changed local info to peer.
08:11:05:15.093 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
08:11:05:15.101 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
08:11:05:15.108 Setting CPLD activity LED mode to OR because both sides not being polled.
08:11:05:15.117 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
08:11:05:15.139 EMC: DISPLAY command success, encl number=01, mode=C.
08:11:05:15.184 EMC: Sending changed local info to peer.
08:11:05:18.370 EMC: Flare polling state restored because good generation number 0xe507 received.
08:11:05:18.378 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
08:11:05:18.385 Setting CPLD activity LED mode to AND because both sides being polled.
08:11:05:18.392 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
08:11:05:18.427 EMC: DISPLAY command success, encl number=01, mode=4.
08:11:05:18.447 EMC: Sending changed local info to peer.
08:11:05:18.461 EMC: Resynchronizing to Flare time: 731157625 ms; timestamp adjusted to: 0 ms.
09:00:00:00.130 EMC: New Day 9
09:00:00:01.496 EMC: Resynchronizing to Flare time: 777649656 ms; timestamp adjusted to: 0 ms.
10:00:00:00.037 EMC: New Day 10
10:00:00:01.802 EMC: Resynchronizing to Flare time: 864090937 ms; timestamp adjusted to: 0 ms.
11:00:00:00.048 EMC: New Day 11
11:00:00:01.059 EMC: Resynchronizing to Flare time: 950489500 ms; timestamp adjusted to: 0 ms.
12:00:00:00.235 EMC: New Day 12
12:00:00:03.516 EMC: Resynchronizing to Flare time: 1036891375 ms; timestamp adjusted to: 0 ms.
12:01:51:10.154 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
12:01:51:10.161 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
12:01:51:10.168 Setting CPLD activity LED mode to OR because both sides not being polled.
12:01:51:10.178 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
12:01:51:10.200 EMC: DISPLAY command success, encl number=01, mode=C.
12:01:51:10.246 EMC: Sending changed local info to peer.
12:01:51:13.429 EMC: Flare polling state restored because good generation number 0xe507 received.
12:01:51:13.438 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
12:01:51:13.445 Setting CPLD activity LED mode to AND because both sides being polled.
12:01:51:13.453 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
12:01:51:13.488 EMC: DISPLAY command success, encl number=01, mode=4.
12:01:51:13.508 EMC: Sending changed local info to peer.
12:01:51:13.522 EMC: Resynchronizing to Flare time: 1043480125 ms; timestamp adjusted to: 0 ms.
13:00:00:00.005 EMC: New Day 13
13:00:00:02.098 EMC: Resynchronizing to Flare time: 1123283406 ms; timestamp adjusted to: 0 ms.
14:00:00:00.109 EMC: New Day 14
14:00:00:02.335 EMC: Resynchronizing to Flare time: 1209691843 ms; timestamp adjusted to: 0 ms.
15:00:00:00.440 EMC: New Day 15
15:00:00:00.666 EMC: Resynchronizing to Flare time: 1296090437 ms; timestamp adjusted to: 0 ms.
16:00:00:00.002 EMC: New Day 16
16:00:00:00.342 EMC: Resynchronizing to Flare time: 1382489031 ms; timestamp adjusted to: 0 ms.
16:04:21:27.865 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
16:04:21:27.877 EMC: DISPLAY command success, encl number=01, mode=4.
16:04:21:28.190 Setting CPLD activity LED mode to OR because both sides not being polled.
16:04:21:31.092 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
16:04:21:31.116 EMC: DISPLAY command success, encl number=01, mode=4.
16:04:21:31.429 Setting CPLD activity LED mode to AND because both sides being polled.
17:00:00:00.025 EMC: New Day 17
17:00:00:02.993 EMC: Resynchronizing to Flare time: 1468890906 ms; timestamp adjusted to: 0 ms.
17:00:31:07.551 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
17:00:31:07.558 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
17:00:31:07.565 Setting CPLD activity LED mode to OR because both sides not being polled.
17:00:31:07.574 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
17:00:31:07.597 EMC: DISPLAY command success, encl number=01, mode=C.
17:00:31:07.643 EMC: Sending changed local info to peer.
17:00:31:10.828 EMC: Flare polling state restored because good generation number 0xe507 received.
17:00:31:10.835 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
17:00:31:10.844 Setting CPLD activity LED mode to AND because both sides being polled.
17:00:31:10.851 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
17:00:31:10.871 EMC: Sending changed local info to peer.
17:00:31:10.881 EMC: DISPLAY command success, encl number=01, mode=4.
18:00:00:00.133 EMC: New Day 18
18:00:00:00.168 EMC: Resynchronizing to Flare time: 1555286218 ms; timestamp adjusted to: 0 ms.
19:00:00:00.233 EMC: New Day 19
19:00:00:02.715 EMC: Resynchronizing to Flare time: 1641691406 ms; timestamp adjusted to: 0 ms.
20:00:00:00.020 EMC: New Day 20
20:00:00:00.461 EMC: Resynchronizing to Flare time: 1728089968 ms; timestamp adjusted to: 0 ms.
21:00:00:00.031 EMC: New Day 21
21:00:00:02.744 EMC: Resynchronizing to Flare time: 1814491875 ms; timestamp adjusted to: 0 ms.
21:08:27:31.677 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
21:08:27:31.699 EMC: DISPLAY command success, encl number=01, mode=4.
21:08:27:32.009 Setting CPLD activity LED mode to OR because both sides not being polled.
21:08:27:35.008 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
21:08:27:35.031 EMC: DISPLAY command success, encl number=01, mode=4.
21:08:27:35.037 EMC: ...read processing took 30 ms, status=Success
21:08:27:36.016 Setting CPLD activity LED mode to AND because both sides being polled.
22:00:00:00.114 EMC: New Day 22
22:00:00:02.257 EMC: Resynchronizing to Flare time: 1900890437 ms; timestamp adjusted to: 0 ms.
23:00:00:00.711 EMC: New Day 23
23:00:00:01.676 EMC: Resynchronizing to Flare time: 1987289031 ms; timestamp adjusted to: 0 ms.
24:00:00:00.089 EMC: New Day 24
24:00:00:03.105 EMC: Resynchronizing to Flare time: 2073690906 ms; timestamp adjusted to: 0 ms.
25:00:00:00.407 EMC: New Day 25
25:00:00:03.747 EMC: Resynchronizing to Flare time: 2160092812 ms; timestamp adjusted to: 0 ms.
26:00:00:00.072 EMC: New Day 26
26:00:00:02.249 EMC: Resynchronizing to Flare time: 2246491390 ms; timestamp adjusted to: 0 ms.
27:00:00:00.219 EMC: New Day 27
27:00:00:01.101 EMC: Resynchronizing to Flare time: 2332889968 ms; timestamp adjusted to: 0 ms.
27:06:28:13.753 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
27:06:28:13.766 EMC: DISPLAY command success, encl number=01, mode=4.
27:06:28:14.077 Setting CPLD activity LED mode to OR because both sides not being polled.
27:06:28:17.268 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
27:06:28:17.291 EMC: DISPLAY command success, encl number=01, mode=4.
27:06:28:17.296 EMC: ...read processing took 29 ms, status=Success
27:06:28:18.456 Setting CPLD activity LED mode to AND because both sides being polled.
27:06:28:27.392 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
27:06:28:27.415 EMC: DISPLAY command success, encl number=01, mode=4.
27:06:28:27.725 Setting CPLD activity LED mode to OR because both sides not being polled.
27:06:28:38.488 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
27:06:28:38.510 EMC: DISPLAY command success, encl number=01, mode=4.
27:06:28:38.823 Setting CPLD activity LED mode to AND because both sides being polled.
                                                                                                                                                                 

Buffer Type: SXP Trace
Buffer Id: 0
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 49th at 17:03:03.
00:00:00:01:265 EMC: Setting Update lock: 1
00:00:00:01:399 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:420 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:440 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:460 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:482 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:502 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:507 EMC: Failed to get Power Supply revision info.
00:00:00:01:514 EMC: SXP FW Version:   04.05
00:00:00:01:518 EMC: SXP BOOT Version: 03.00
00:00:00:01:522 EMC: SXP ISTR Version: 03.05
00:00:00:01:526 EMC: MC Version:       16.01
00:00:00:01:531 EMC: DLMC Version:     14.47
00:00:00:01:535 EMC: PS Version:       00.01
00:00:00:01:539 EMC: CPLD Version:     00.09
00:00:00:01:543 EMC: Base SAS Address: 50060480_00b680c0
00:00:00:01:548 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:557 EMC: Exception flag read from register is 0
00:00:00:00:985 EMC: Setting enclosure number to 255
00:00:00:01:005 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:01:026 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:049 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:069 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:090 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:112 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:119 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:142 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:165 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:185 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:239 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:259 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:265 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:287 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:308 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:330 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:350 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:370 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:375 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:383 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:01:389 EMC: Checking for updated FW!
00:00:00:01:393 EMC: Checking for SXP FW download
00:00:00:01:420 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:01:435 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:01:440 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:15:669 WDG EXPIRED: Elapsed time since last WDG run: 799 ms
00:00:00:15:674 WDG: Pong not received from: EMA
                                              

Buffer Type: SXP Trace
Buffer Id: 1
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 946
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:15.7
00:00:00:01:264 EMC: Setting Update lock: 1
00:00:00:01:350 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:384 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:404 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:424 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:445 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:467 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:472 EMC: Failed to get Power Supply revision info.
00:00:00:01:478 EMC: SXP FW Version:   04.05
00:00:00:01:483 EMC: SXP BOOT Version: 03.00
00:00:00:01:487 EMC: SXP ISTR Version: 03.05
00:00:00:01:491 EMC: MC Version:       16.01
00:00:00:01:497 EMC: DLMC Version:     14.47
00:00:00:01:501 EMC: PS Version:       00.01
00:00:00:01:505 EMC: CPLD Version:     00.13
00:00:00:15:768 WDG EXPIRED: Elapsed time since last WDG run: 229 ms
00:00:00:15:773 WDG: Pong not received from: EMA
                 

Buffer Type: SXP Trace
Buffer Id: 2
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:51.
00:00:00:01:263 EMC: Setting Update lock: 1
00:00:00:01:349 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:382 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:402 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:423 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:443 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:465 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:470 EMC: Failed to get Power Supply revision info.
00:00:00:01:476 EMC: SXP FW Version:   04.05
00:00:00:01:481 EMC: SXP BOOT Version: 03.00
00:00:00:01:485 EMC: SXP ISTR Version: 03.05
00:00:00:01:489 EMC: MC Version:       16.01
00:00:00:01:493 EMC: DLMC Version:     14.47
00:00:00:01:498 EMC: PS Version:       00.01
00:00:00:01:502 EMC: CPLD Version:     00.13
00:00:00:01:506 EMC: Base SAS Address: 50060480_00fa80c0
00:00:00:01:510 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:520 EMC: Exception flag read from register is 1
00:00:00:36:984 EMC: Setting enclosure number to 255
00:00:00:37:003 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:37:046 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:068 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:089 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:109 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:130 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:136 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:160 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:183 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:204 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:225 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:269 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:274 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:298 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:321 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:342 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:363 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:385 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:390 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:397 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:37:404 EMC: Checking for updated FW!
00:00:00:37:408 EMC: Checking for SXP FW download
00:00:00:37:436 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:37:451 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:37:456 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:51:683 WDG EXPIRED: Elapsed time since last WDG run: 792 ms
00:00:00:51:688 WDG: Pong not received from: EMA
                                              

Buffer Type: Expander Ring Buffer Trace
Buffer Id: 255
Source: Manual
SXP Major Rev: 04
SXP Minor Rev: 30
Length: -1
Timestamp: 09/27/2010 09:42:21
        
21:08:27:35.031 EMC: DISPLAY command success, encl number=01, mode=4.
21:08:27:35.037 EMC: ...read processing took 30 ms, status=Success
21:08:27:36.016 Setting CPLD activity LED mode to AND because both sides being polled.
22:00:00:00.114 EMC: New Day 22
22:00:00:02.257 EMC: Resynchronizing to Flare time: 1900890437 ms; timestamp adjusted to: 0 ms.
23:00:00:00.711 EMC: New Day 23
23:00:00:01.676 EMC: Resynchronizing to Flare time: 1987289031 ms; timestamp adjusted to: 0 ms.
24:00:00:00.089 EMC: New Day 24
24:00:00:03.105 EMC: Resynchronizing to Flare time: 2073690906 ms; timestamp adjusted to: 0 ms.
25:00:00:00.407 EMC: New Day 25
25:00:00:03.747 EMC: Resynchronizing to Flare time: 2160092812 ms; timestamp adjusted to: 0 ms.
26:00:00:00.072 EMC: New Day 26
26:00:00:02.249 EMC: Resynchronizing to Flare time: 2246491390 ms; timestamp adjusted to: 0 ms.
27:00:00:00.219 EMC: New Day 27
27:00:00:01.101 EMC: Resynchronizing to Flare time: 2332889968 ms; timestamp adjusted to: 0 ms.
27:06:28:13.753 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
27:06:28:13.766 EMC: DISPLAY command success, encl number=01, mode=4.
27:06:28:14.077 Setting CPLD activity LED mode to OR because both sides not being polled.
27:06:28:17.268 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
27:06:28:17.291 EMC: DISPLAY command success, encl number=01, mode=4.
27:06:28:17.296 EMC: ...read processing took 29 ms, status=Success
27:06:28:18.456 Setting CPLD activity LED mode to AND because both sides being polled.
27:06:28:27.392 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
27:06:28:27.415 EMC: DISPLAY command success, encl number=01, mode=4.
27:06:28:27.725 Setting CPLD activity LED mode to OR because both sides not being polled.
27:06:28:38.488 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
27:06:28:38.510 EMC: DISPLAY command success, encl number=01, mode=4.
27:06:28:38.823 Setting CPLD activity LED mode to AND because both sides being polled.
27:06:30:24.397 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
27:06:30:24.406 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
27:06:30:24.413 Setting CPLD activity LED mode to OR because both sides not being polled.
27:06:30:24.425 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
27:06:30:24.458 EMC: DISPLAY command success, encl number=01, mode=C.
27:06:30:24.570 EMC: Sending changed local info to peer.
27:06:30:27.075 EMC: Flare polling state restored because good generation number 0xe507 received.
27:06:30:27.082 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
27:06:30:27.091 Setting CPLD activity LED mode to AND because both sides being polled.
27:06:30:27.098 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
27:06:30:27.120 EMC: Sending changed local info to peer.
27:06:30:27.130 EMC: DISPLAY command success, encl number=01, mode=4.
27:06:30:27.174 EMC: Resynchronizing to Flare time: 2356251031 ms; timestamp adjusted to: 0 ms.
27:08:37:37.476 EMC: Upstream wide port: DISCONNECTED.
27:08:37:37.522 EMC: Upstream cable phy 0 status going from READY to NOT READY
27:08:37:37.529 EMC: Upstream cable phy 1 status going from READY to NOT READY
27:08:37:37.538 EMC: Upstream cable phy 2 status going from READY to NOT READY
27:08:37:37.545 EMC: Upstream cable phy 3 status going from READY to NOT READY
27:08:37:37.557 EMC: Detected upstream addr chg 50060489_703ecaff to NONE.
27:08:37:37.564 EMC: Sending changed local info to peer.
27:08:37:38.215 EMC: Setting state change bit.
27:08:37:38.525 EMC: Setting upstream connectivity LED to FLASH because peer upstream connected but not me!
27:08:37:38.535 EMC: Expander requesting Upstream Conn LED change from ON to FLASH
27:08:37:38.541 EMC: Expander requesting Encl LED change from OFF to ON
27:08:37:38.569 EMC: UPSTREAM PORT status going from CONNECTED to UNCONNECTED
27:08:37:38.576 EMC: LED updater changing Upstream Conn LED from ON to FLASH
27:08:37:38.587 EMC: Writing LED command to MC: "L55B95555"
27:08:37:38.656 EMC: Sending changed local info to peer.
27:08:37:39.631 EMC: Other READ PAGE change detected.
27:08:37:39.967 EMC: Upstream cable phy 0 status going from NOT READY to READY
27:08:37:39.987 EMC: Upstream cable phy 1 status going from NOT READY to READY
27:08:37:39.996 EMC: Upstream cable phy 2 status going from NOT READY to READY
27:08:37:40.004 EMC: Upstream cable phy 3 status going from NOT READY to READY
27:08:37:40.016 EMC: Detected upstream addr chg NONE to 50060489_703ecaff.
27:08:37:40.026 EMC: Sending changed local info to peer.
27:08:37:40.993 EMC: Setting upstream connectivity LED to ON because upstream connection found.
27:08:37:41.002 EMC: Expander requesting Upstream Conn LED change from FLASH to ON
27:08:37:41.009 EMC: Expander requesting Encl LED change from ON to OFF
27:08:37:41.035 EMC: UPSTREAM PORT status going from UNCONNECTED to CONNECTED
27:08:37:41.041 EMC: LED updater changing Upstream Conn LED from FLASH to ON
27:08:37:41.049 EMC: Writing LED command to MC: "L55A55555"
27:08:37:41.118 EMC: Sending changed local info to peer.
27:08:37:42.326 EMC: ...read processing took 0 ms, status=Success
27:08:37:42.981 EMC: ...write took 649 ms, status=Success
27:08:37:43.273 EMC: Upstream wide port: CONNECTED.
27:08:37:43.277 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
27:08:37:43.285 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
27:08:37:43.292 Setting CPLD activity LED mode to OR because both sides not being polled.
27:08:37:43.301 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
27:08:37:43.313 EMC: DISPLAY command success, encl number=01, mode=C.
27:08:37:43.356 EMC: Other READ PAGE change detected.
27:08:37:43.360 EMC: Sending changed local info to peer.
27:08:38:25.938 EMC: Flare polling state turned off because bad gen number 0xfe18 received; expected 0xe507.
27:08:38:25.947 EMC: Flare polling state change: self FAILED to NO, peer YES to YES
27:08:38:25.971 EMC: DISPLAY command success, encl number=01, mode=C.
27:08:38:26.401 EMC: Sending changed local info to peer.
27:08:39:38.962 EMC: Upstream cable phy 0 status going from READY to NOT READY
27:08:39:38.968 EMC: Upstream cable phy 1 status going from READY to NOT READY
27:08:39:38.976 EMC: Upstream cable phy 2 status going from READY to NOT READY
27:08:39:38.982 EMC: Upstream cable phy 3 status going from READY to NOT READY
27:08:39:38.990 EMC: Detected upstream addr chg 50060489_703ecaff to NONE.
27:08:39:38.997 EMC: Sending changed local info to peer.
27:08:39:39.938 EMC: Upstream wide port: DISCONNECTED.
27:08:39:39.960 EMC: Setting upstream connectivity LED to FLASH because peer upstream connected but not me!
27:08:39:39.970 EMC: Expander requesting Upstream Conn LED change from ON to FLASH
27:08:39:39.977 EMC: Expander requesting Encl LED change from OFF to ON
27:08:39:40.003 EMC: UPSTREAM PORT status going from CONNECTED to UNCONNECTED
27:08:39:40.010 EMC: LED updater changing Upstream Conn LED from ON to FLASH
27:08:39:40.016 EMC: Writing LED command to MC: "L55B95555"
27:08:39:40.088 EMC: Sending changed local info to peer.
27:08:39:41.012 EMC: ...read processing took 0 ms, status=Success
27:08:39:41.695 EMC: Upstream cable phy 0 status going from NOT READY to READY
27:08:39:41.702 EMC: Upstream cable phy 1 status going from NOT READY to READY
27:08:39:41.710 EMC: Upstream cable phy 2 status going from NOT READY to READY
27:08:39:41.716 EMC: Upstream cable phy 3 status going from NOT READY to READY
27:08:39:41.725 EMC: Detected upstream addr chg NONE to 50060489_703ecaff.
27:08:39:41.731 EMC: Sending changed local info to peer.
27:08:39:42.673 EMC: Upstream wide port: CONNECTED.
27:08:39:42.695 EMC: Setting upstream connectivity LED to ON because upstream connection found.
27:08:39:42.704 EMC: Expander requesting Upstream Conn LED change from FLASH to ON
27:08:39:42.711 EMC: Expander requesting Encl LED change from ON to OFF
27:08:39:42.739 EMC: UPSTREAM PORT status going from UNCONNECTED to CONNECTED
27:08:39:42.746 EMC: LED updater changing Upstream Conn LED from FLASH to ON
27:08:39:42.754 EMC: Writing LED command to MC: "L55A55555"
27:08:39:42.824 EMC: Sending changed local info to peer.
27:08:39:43.798 EMC: Other READ PAGE change detected.
27:08:41:41.304 EMC: Resynchronizing to Flare time: 2364109546 ms; timestamp adjusted to: 0 ms.
27:08:41:49.573 EMC: Clearing state change bit.
27:08:41:49.579 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
27:08:41:49.578 EMC: Setting enclosure number to 1
27:08:41:49.598 EMC: DISPLAY command success, encl number=01, mode=C.
27:08:41:49.603 EMC: Flare assigns this enclosure number = 1, generation number = 0x2306
27:08:41:49.611 EMC: Flare polling state change: self NO to YES, peer YES to YES
27:08:41:49.619 Setting CPLD activity LED mode to AND because both sides being polled.
27:08:41:49.627 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
27:08:41:49.649 EMC: DISPLAY command success, encl number=01, mode=4.
27:08:41:49.701 EMC: Sending changed local info to peer.
27:08:42:14.750 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
27:08:42:16.984 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
27:08:42:19.312 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
27:08:42:21.453 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
27:08:42:23.859 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
27:09:39:38.828 EMC: ...read processing took 0 ms, status=Success
27:09:39:39.816 EMC: Detected peer upstream addr chg 50060489_703ecabf to NONE.
27:09:39:39.824 EMC: Setting state change bit.
27:09:39:41.392 EMC: Other READ PAGE change detected.
27:09:39:45.188 EMC: Clearing state change bit.
27:09:39:45.192 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
27:09:39:45.250 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
27:09:39:45.475 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
27:09:39:45.498 EMC: DISPLAY command success, encl number=01, mode=4.
27:09:39:45.798 EMC: Detected peer upstream addr chg NONE to 50060489_703ecabf.
27:09:39:45.804 Setting CPLD activity LED mode to OR because both sides not being polled.
27:09:39:45.814 EMC: Setting state change bit.
27:09:39:46.762 EMC: Other READ PAGE change detected.
27:09:39:48.453 EMC: Clearing state change bit.
27:09:39:48.457 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
27:09:39:48.515 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
27:09:40:30.874 EMC: Flare polling state change: self YES to YES, peer FAILED to NO
27:09:40:30.897 EMC: DISPLAY command success, encl number=01, mode=4.
27:09:41:44.041 EMC: Detected peer upstream addr chg 50060489_703ecabf to NONE.
27:09:41:44.047 EMC: Setting state change bit.
27:09:41:45.007 EMC: Other READ PAGE change detected.
27:09:41:46.578 EMC: Clearing state change bit.
27:09:41:46.582 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
27:09:41:46.656 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
27:09:41:46.737 EMC: Detected peer upstream addr chg NONE to 50060489_703ecabf.
27:09:41:46.743 EMC: Setting state change bit.
27:09:41:47.976 EMC: Other READ PAGE change detected.
27:09:41:49.859 EMC: Clearing state change bit.
27:09:41:49.863 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
27:09:41:49.937 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
                                                                                                                                                                 

Buffer Type: SXP Trace
Buffer Id: 0
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 49th at 17:03:03.
00:00:00:01:265 EMC: Setting Update lock: 1
00:00:00:01:399 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:420 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:440 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:460 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:482 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:502 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:507 EMC: Failed to get Power Supply revision info.
00:00:00:01:514 EMC: SXP FW Version:   04.05
00:00:00:01:518 EMC: SXP BOOT Version: 03.00
00:00:00:01:522 EMC: SXP ISTR Version: 03.05
00:00:00:01:526 EMC: MC Version:       16.01
00:00:00:01:531 EMC: DLMC Version:     14.47
00:00:00:01:535 EMC: PS Version:       00.01
00:00:00:01:539 EMC: CPLD Version:     00.09
00:00:00:01:543 EMC: Base SAS Address: 50060480_00b680c0
00:00:00:01:548 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:557 EMC: Exception flag read from register is 0
00:00:00:00:985 EMC: Setting enclosure number to 255
00:00:00:01:005 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:01:026 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:049 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:069 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:090 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:112 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:119 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:142 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:165 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:185 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:239 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:259 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:265 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:287 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:308 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:330 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:350 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:370 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:375 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:383 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:01:389 EMC: Checking for updated FW!
00:00:00:01:393 EMC: Checking for SXP FW download
00:00:00:01:420 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:01:435 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:01:440 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:15:669 WDG EXPIRED: Elapsed time since last WDG run: 799 ms
00:00:00:15:674 WDG: Pong not received from: EMA
                                              

Buffer Type: SXP Trace
Buffer Id: 1
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 946
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:15.7
00:00:00:01:264 EMC: Setting Update lock: 1
00:00:00:01:350 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:384 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:404 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:424 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:445 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:467 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:472 EMC: Failed to get Power Supply revision info.
00:00:00:01:478 EMC: SXP FW Version:   04.05
00:00:00:01:483 EMC: SXP BOOT Version: 03.00
00:00:00:01:487 EMC: SXP ISTR Version: 03.05
00:00:00:01:491 EMC: MC Version:       16.01
00:00:00:01:497 EMC: DLMC Version:     14.47
00:00:00:01:501 EMC: PS Version:       00.01
00:00:00:01:505 EMC: CPLD Version:     00.13
00:00:00:15:768 WDG EXPIRED: Elapsed time since last WDG run: 229 ms
00:00:00:15:773 WDG: Pong not received from: EMA
                 

Buffer Type: SXP Trace
Buffer Id: 2
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:51.
00:00:00:01:263 EMC: Setting Update lock: 1
00:00:00:01:349 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:382 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:402 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:423 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:443 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:465 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:470 EMC: Failed to get Power Supply revision info.
00:00:00:01:476 EMC: SXP FW Version:   04.05
00:00:00:01:481 EMC: SXP BOOT Version: 03.00
00:00:00:01:485 EMC: SXP ISTR Version: 03.05
00:00:00:01:489 EMC: MC Version:       16.01
00:00:00:01:493 EMC: DLMC Version:     14.47
00:00:00:01:498 EMC: PS Version:       00.01
00:00:00:01:502 EMC: CPLD Version:     00.13
00:00:00:01:506 EMC: Base SAS Address: 50060480_00fa80c0
00:00:00:01:510 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:520 EMC: Exception flag read from register is 1
00:00:00:36:984 EMC: Setting enclosure number to 255
00:00:00:37:003 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:37:046 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:068 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:089 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:109 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:130 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:136 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:160 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:183 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:204 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:225 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:269 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:274 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:298 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:321 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:342 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:363 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:385 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:390 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:397 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:37:404 EMC: Checking for updated FW!
00:00:00:37:408 EMC: Checking for SXP FW download
00:00:00:37:436 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:37:451 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:37:456 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:51:683 WDG EXPIRED: Elapsed time since last WDG run: 792 ms
00:00:00:51:688 WDG: Pong not received from: EMA
                                              

Buffer Type: Expander Ring Buffer Trace
Buffer Id: 255
Source: Manual
SXP Major Rev: 04
SXP Minor Rev: 30
Length: -1
Timestamp: 09/27/2010 09:48:03
        
27:06:28:27.415 EMC: DISPLAY command success, encl number=01, mode=4.
27:06:28:27.725 Setting CPLD activity LED mode to OR because both sides not being polled.
27:06:28:38.488 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
27:06:28:38.510 EMC: DISPLAY command success, encl number=01, mode=4.
27:06:28:38.823 Setting CPLD activity LED mode to AND because both sides being polled.
27:06:30:24.397 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
27:06:30:24.406 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
27:06:30:24.413 Setting CPLD activity LED mode to OR because both sides not being polled.
27:06:30:24.425 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
27:06:30:24.458 EMC: DISPLAY command success, encl number=01, mode=C.
27:06:30:24.570 EMC: Sending changed local info to peer.
27:06:30:27.075 EMC: Flare polling state restored because good generation number 0xe507 received.
27:06:30:27.082 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
27:06:30:27.091 Setting CPLD activity LED mode to AND because both sides being polled.
27:06:30:27.098 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
27:06:30:27.120 EMC: Sending changed local info to peer.
27:06:30:27.130 EMC: DISPLAY command success, encl number=01, mode=4.
27:06:30:27.174 EMC: Resynchronizing to Flare time: 2356251031 ms; timestamp adjusted to: 0 ms.
27:08:37:37.476 EMC: Upstream wide port: DISCONNECTED.
27:08:37:37.522 EMC: Upstream cable phy 0 status going from READY to NOT READY
27:08:37:37.529 EMC: Upstream cable phy 1 status going from READY to NOT READY
27:08:37:37.538 EMC: Upstream cable phy 2 status going from READY to NOT READY
27:08:37:37.545 EMC: Upstream cable phy 3 status going from READY to NOT READY
27:08:37:37.557 EMC: Detected upstream addr chg 50060489_703ecaff to NONE.
27:08:37:37.564 EMC: Sending changed local info to peer.
27:08:37:38.215 EMC: Setting state change bit.
27:08:37:38.525 EMC: Setting upstream connectivity LED to FLASH because peer upstream connected but not me!
27:08:37:38.535 EMC: Expander requesting Upstream Conn LED change from ON to FLASH
27:08:37:38.541 EMC: Expander requesting Encl LED change from OFF to ON
27:08:37:38.569 EMC: UPSTREAM PORT status going from CONNECTED to UNCONNECTED
27:08:37:38.576 EMC: LED updater changing Upstream Conn LED from ON to FLASH
27:08:37:38.587 EMC: Writing LED command to MC: "L55B95555"
27:08:37:38.656 EMC: Sending changed local info to peer.
27:08:37:39.631 EMC: Other READ PAGE change detected.
27:08:37:39.967 EMC: Upstream cable phy 0 status going from NOT READY to READY
27:08:37:39.987 EMC: Upstream cable phy 1 status going from NOT READY to READY
27:08:37:39.996 EMC: Upstream cable phy 2 status going from NOT READY to READY
27:08:37:40.004 EMC: Upstream cable phy 3 status going from NOT READY to READY
27:08:37:40.016 EMC: Detected upstream addr chg NONE to 50060489_703ecaff.
27:08:37:40.026 EMC: Sending changed local info to peer.
27:08:37:40.993 EMC: Setting upstream connectivity LED to ON because upstream connection found.
27:08:37:41.002 EMC: Expander requesting Upstream Conn LED change from FLASH to ON
27:08:37:41.009 EMC: Expander requesting Encl LED change from ON to OFF
27:08:37:41.035 EMC: UPSTREAM PORT status going from UNCONNECTED to CONNECTED
27:08:37:41.041 EMC: LED updater changing Upstream Conn LED from FLASH to ON
27:08:37:41.049 EMC: Writing LED command to MC: "L55A55555"
27:08:37:41.118 EMC: Sending changed local info to peer.
27:08:37:42.326 EMC: ...read processing took 0 ms, status=Success
27:08:37:42.981 EMC: ...write took 649 ms, status=Success
27:08:37:43.273 EMC: Upstream wide port: CONNECTED.
27:08:37:43.277 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
27:08:37:43.285 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
27:08:37:43.292 Setting CPLD activity LED mode to OR because both sides not being polled.
27:08:37:43.301 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
27:08:37:43.313 EMC: DISPLAY command success, encl number=01, mode=C.
27:08:37:43.356 EMC: Other READ PAGE change detected.
27:08:37:43.360 EMC: Sending changed local info to peer.
27:08:38:25.938 EMC: Flare polling state turned off because bad gen number 0xfe18 received; expected 0xe507.
27:08:38:25.947 EMC: Flare polling state change: self FAILED to NO, peer YES to YES
27:08:38:25.971 EMC: DISPLAY command success, encl number=01, mode=C.
27:08:38:26.401 EMC: Sending changed local info to peer.
27:08:39:38.962 EMC: Upstream cable phy 0 status going from READY to NOT READY
27:08:39:38.968 EMC: Upstream cable phy 1 status going from READY to NOT READY
27:08:39:38.976 EMC: Upstream cable phy 2 status going from READY to NOT READY
27:08:39:38.982 EMC: Upstream cable phy 3 status going from READY to NOT READY
27:08:39:38.990 EMC: Detected upstream addr chg 50060489_703ecaff to NONE.
27:08:39:38.997 EMC: Sending changed local info to peer.
27:08:39:39.938 EMC: Upstream wide port: DISCONNECTED.
27:08:39:39.960 EMC: Setting upstream connectivity LED to FLASH because peer upstream connected but not me!
27:08:39:39.970 EMC: Expander requesting Upstream Conn LED change from ON to FLASH
27:08:39:39.977 EMC: Expander requesting Encl LED change from OFF to ON
27:08:39:40.003 EMC: UPSTREAM PORT status going from CONNECTED to UNCONNECTED
27:08:39:40.010 EMC: LED updater changing Upstream Conn LED from ON to FLASH
27:08:39:40.016 EMC: Writing LED command to MC: "L55B95555"
27:08:39:40.088 EMC: Sending changed local info to peer.
27:08:39:41.012 EMC: ...read processing took 0 ms, status=Success
27:08:39:41.695 EMC: Upstream cable phy 0 status going from NOT READY to READY
27:08:39:41.702 EMC: Upstream cable phy 1 status going from NOT READY to READY
27:08:39:41.710 EMC: Upstream cable phy 2 status going from NOT READY to READY
27:08:39:41.716 EMC: Upstream cable phy 3 status going from NOT READY to READY
27:08:39:41.725 EMC: Detected upstream addr chg NONE to 50060489_703ecaff.
27:08:39:41.731 EMC: Sending changed local info to peer.
27:08:39:42.673 EMC: Upstream wide port: CONNECTED.
27:08:39:42.695 EMC: Setting upstream connectivity LED to ON because upstream connection found.
27:08:39:42.704 EMC: Expander requesting Upstream Conn LED change from FLASH to ON
27:08:39:42.711 EMC: Expander requesting Encl LED change from ON to OFF
27:08:39:42.739 EMC: UPSTREAM PORT status going from UNCONNECTED to CONNECTED
27:08:39:42.746 EMC: LED updater changing Upstream Conn LED from FLASH to ON
27:08:39:42.754 EMC: Writing LED command to MC: "L55A55555"
27:08:39:42.824 EMC: Sending changed local info to peer.
27:08:39:43.798 EMC: Other READ PAGE change detected.
27:08:41:41.304 EMC: Resynchronizing to Flare time: 2364109546 ms; timestamp adjusted to: 0 ms.
27:08:41:49.573 EMC: Clearing state change bit.
27:08:41:49.579 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
27:08:41:49.578 EMC: Setting enclosure number to 1
27:08:41:49.598 EMC: DISPLAY command success, encl number=01, mode=C.
27:08:41:49.603 EMC: Flare assigns this enclosure number = 1, generation number = 0x2306
27:08:41:49.611 EMC: Flare polling state change: self NO to YES, peer YES to YES
27:08:41:49.619 Setting CPLD activity LED mode to AND because both sides being polled.
27:08:41:49.627 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
27:08:41:49.649 EMC: DISPLAY command success, encl number=01, mode=4.
27:08:41:49.701 EMC: Sending changed local info to peer.
27:08:42:14.750 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
27:08:42:16.984 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
27:08:42:19.312 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
27:08:42:21.453 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
27:08:42:23.859 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
27:09:39:38.828 EMC: ...read processing took 0 ms, status=Success
27:09:39:39.816 EMC: Detected peer upstream addr chg 50060489_703ecabf to NONE.
27:09:39:39.824 EMC: Setting state change bit.
27:09:39:41.392 EMC: Other READ PAGE change detected.
27:09:39:45.188 EMC: Clearing state change bit.
27:09:39:45.192 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
27:09:39:45.250 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
27:09:39:45.475 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
27:09:39:45.498 EMC: DISPLAY command success, encl number=01, mode=4.
27:09:39:45.798 EMC: Detected peer upstream addr chg NONE to 50060489_703ecabf.
27:09:39:45.804 Setting CPLD activity LED mode to OR because both sides not being polled.
27:09:39:45.814 EMC: Setting state change bit.
27:09:39:46.762 EMC: Other READ PAGE change detected.
27:09:39:48.453 EMC: Clearing state change bit.
27:09:39:48.457 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
27:09:39:48.515 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
27:09:40:30.874 EMC: Flare polling state change: self YES to YES, peer FAILED to NO
27:09:40:30.897 EMC: DISPLAY command success, encl number=01, mode=4.
27:09:41:44.041 EMC: Detected peer upstream addr chg 50060489_703ecabf to NONE.
27:09:41:44.047 EMC: Setting state change bit.
27:09:41:45.007 EMC: Other READ PAGE change detected.
27:09:41:46.578 EMC: Clearing state change bit.
27:09:41:46.582 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
27:09:41:46.656 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
27:09:41:46.737 EMC: Detected peer upstream addr chg NONE to 50060489_703ecabf.
27:09:41:46.743 EMC: Setting state change bit.
27:09:41:47.976 EMC: Other READ PAGE change detected.
27:09:41:49.859 EMC: Clearing state change bit.
27:09:41:49.863 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
27:09:41:49.937 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
27:09:42:28.976 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
27:09:42:28.985 EMC: Flare polling state change: self YES to FAILED, peer NO to NO
27:09:42:28.993 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
27:09:42:29.039 EMC: DISPLAY command success, encl number=01, mode=C.
27:09:42:29.152 EMC: Sending changed local info to peer.
27:09:42:37.703 EMC: Flare polling state restored because good generation number 0x2306 received.
27:09:42:37.711 EMC: Flare polling state change: self FAILED to YES, peer NO to NO
27:09:42:37.718 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
27:09:42:37.727 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
27:09:42:37.735 EMC: Flare polling state change: self YES to FAILED, peer NO to NO
27:09:42:37.742 EMC: DISPLAY command success, encl number=01, mode=4.
27:09:42:37.743 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
27:09:42:37.538 EMC: DISPLAY command success, encl number=01, mode=C.
27:09:42:37.580 EMC: Sending changed local info to peer.
27:09:42:37.768 EMC: Flare polling state restored because good generation number 0x2306 received.
27:09:42:37.777 EMC: Flare polling state change: self FAILED to YES, peer NO to NO
27:09:42:37.785 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
27:09:42:37.810 EMC: DISPLAY command success, encl number=01, mode=4.
27:09:42:38.781 EMC: Sending changed local info to peer.
27:09:43:46.011 EMC: Flare polling state change: self YES to YES, peer NO to YES
27:09:43:46.034 EMC: DISPLAY command success, encl number=01, mode=4.
27:09:43:46.340 Setting CPLD activity LED mode to AND because both sides being polled.
27:09:43:51.781 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
                                                                                                                                                                 

Buffer Type: SXP Trace
Buffer Id: 0
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 49th at 17:03:03.
00:00:00:01:265 EMC: Setting Update lock: 1
00:00:00:01:399 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:420 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:440 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:460 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:482 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:502 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:507 EMC: Failed to get Power Supply revision info.
00:00:00:01:514 EMC: SXP FW Version:   04.05
00:00:00:01:518 EMC: SXP BOOT Version: 03.00
00:00:00:01:522 EMC: SXP ISTR Version: 03.05
00:00:00:01:526 EMC: MC Version:       16.01
00:00:00:01:531 EMC: DLMC Version:     14.47
00:00:00:01:535 EMC: PS Version:       00.01
00:00:00:01:539 EMC: CPLD Version:     00.09
00:00:00:01:543 EMC: Base SAS Address: 50060480_00b680c0
00:00:00:01:548 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:557 EMC: Exception flag read from register is 0
00:00:00:00:985 EMC: Setting enclosure number to 255
00:00:00:01:005 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:01:026 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:049 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:069 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:090 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:112 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:119 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:142 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:165 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:185 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:239 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:259 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:265 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:287 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:308 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:330 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:350 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:370 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:375 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:383 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:01:389 EMC: Checking for updated FW!
00:00:00:01:393 EMC: Checking for SXP FW download
00:00:00:01:420 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:01:435 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:01:440 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:15:669 WDG EXPIRED: Elapsed time since last WDG run: 799 ms
00:00:00:15:674 WDG: Pong not received from: EMA
                                              

Buffer Type: SXP Trace
Buffer Id: 1
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 946
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:15.7
00:00:00:01:264 EMC: Setting Update lock: 1
00:00:00:01:350 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:384 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:404 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:424 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:445 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:467 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:472 EMC: Failed to get Power Supply revision info.
00:00:00:01:478 EMC: SXP FW Version:   04.05
00:00:00:01:483 EMC: SXP BOOT Version: 03.00
00:00:00:01:487 EMC: SXP ISTR Version: 03.05
00:00:00:01:491 EMC: MC Version:       16.01
00:00:00:01:497 EMC: DLMC Version:     14.47
00:00:00:01:501 EMC: PS Version:       00.01
00:00:00:01:505 EMC: CPLD Version:     00.13
00:00:00:15:768 WDG EXPIRED: Elapsed time since last WDG run: 229 ms
00:00:00:15:773 WDG: Pong not received from: EMA
                 

Buffer Type: SXP Trace
Buffer Id: 2
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:51.
00:00:00:01:263 EMC: Setting Update lock: 1
00:00:00:01:349 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:382 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:402 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:423 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:443 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:465 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:470 EMC: Failed to get Power Supply revision info.
00:00:00:01:476 EMC: SXP FW Version:   04.05
00:00:00:01:481 EMC: SXP BOOT Version: 03.00
00:00:00:01:485 EMC: SXP ISTR Version: 03.05
00:00:00:01:489 EMC: MC Version:       16.01
00:00:00:01:493 EMC: DLMC Version:     14.47
00:00:00:01:498 EMC: PS Version:       00.01
00:00:00:01:502 EMC: CPLD Version:     00.13
00:00:00:01:506 EMC: Base SAS Address: 50060480_00fa80c0
00:00:00:01:510 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:520 EMC: Exception flag read from register is 1
00:00:00:36:984 EMC: Setting enclosure number to 255
00:00:00:37:003 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:37:046 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:068 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:089 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:109 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:130 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:136 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:160 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:183 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:204 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:225 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:269 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:274 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:298 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:321 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:342 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:363 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:385 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:390 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:397 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:37:404 EMC: Checking for updated FW!
00:00:00:37:408 EMC: Checking for SXP FW download
00:00:00:37:436 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:37:451 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:37:456 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:51:683 WDG EXPIRED: Elapsed time since last WDG run: 792 ms
00:00:00:51:688 WDG: Pong not received from: EMA
                                              

Buffer Type: Expander Ring Buffer Trace
Buffer Id: 255
Source: Manual
SXP Major Rev: 04
SXP Minor Rev: 30
Length: -1
Timestamp: 02/18/2011 19:42:19
        
23:08:36:31.093 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
23:08:36:31.112 EMC: DISPLAY command success, encl number=01, mode=4.
23:08:36:31.146 EMC: Resynchronizing to Flare time: 2018222968 ms; timestamp adjusted to: 0 ms.
23:08:37:03.016 EMC: Sending changed local info to peer.
24:00:00:00.079 EMC: New Day 24
24:00:00:02.454 EMC: Resynchronizing to Flare time: 2073659687 ms; timestamp adjusted to: 0 ms.
25:00:00:00.246 EMC: New Day 25
25:00:00:03.059 EMC: Resynchronizing to Flare time: 2160091125 ms; timestamp adjusted to: 0 ms.
26:00:00:00.262 EMC: New Day 26
26:00:00:01.665 EMC: Resynchronizing to Flare time: 2246489687 ms; timestamp adjusted to: 0 ms.
26:00:04:24.562 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
26:00:04:24.584 EMC: DISPLAY command success, encl number=01, mode=4.
26:00:04:24.882 Setting CPLD activity LED mode to OR because both sides not being polled.
26:00:04:28.098 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
26:00:04:28.124 EMC: DISPLAY command success, encl number=01, mode=4.
26:00:04:28.435 Setting CPLD activity LED mode to AND because both sides being polled.
27:00:00:00.015 EMC: New Day 27
27:00:00:02.624 EMC: Resynchronizing to Flare time: 2332891562 ms; timestamp adjusted to: 0 ms.
27:15:06:50.709 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
27:15:06:50.732 EMC: DISPLAY command success, encl number=01, mode=4.
27:15:06:51.039 Setting CPLD activity LED mode to OR because both sides not being polled.
27:15:06:53.961 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
27:15:06:53.974 EMC: DISPLAY command success, encl number=01, mode=4.
27:15:06:54.282 Setting CPLD activity LED mode to AND because both sides being polled.
28:00:00:00.157 EMC: New Day 28
28:00:00:00.908 EMC: Resynchronizing to Flare time: 2419290156 ms; timestamp adjusted to: 0 ms.
28:04:21:08.239 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
28:04:21:08.262 EMC: DISPLAY command success, encl number=01, mode=4.
28:04:21:08.569 Setting CPLD activity LED mode to OR because both sides not being polled.
28:04:21:11.780 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
28:04:21:11.805 EMC: DISPLAY command success, encl number=01, mode=4.
28:04:21:12.102 Setting CPLD activity LED mode to AND because both sides being polled.
29:00:00:00.018 EMC: New Day 29
29:00:00:02.658 EMC: Resynchronizing to Flare time: 2505692062 ms; timestamp adjusted to: 0 ms.
29:10:16:07.239 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
29:10:16:07.261 EMC: DISPLAY command success, encl number=01, mode=4.
29:10:16:07.567 Setting CPLD activity LED mode to OR because both sides not being polled.
29:10:16:10.466 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
29:10:16:10.479 EMC: DISPLAY command success, encl number=01, mode=4.
29:10:16:10.789 Setting CPLD activity LED mode to AND because both sides being polled.
30:00:00:00.231 EMC: New Day 30
30:00:00:02.476 EMC: Resynchronizing to Flare time: 2592090656 ms; timestamp adjusted to: 0 ms.
31:00:00:00.126 EMC: New Day 31
31:00:00:01.797 EMC: Resynchronizing to Flare time: 2678489265 ms; timestamp adjusted to: 0 ms.
32:00:00:00.259 EMC: New Day 32
32:00:00:02.720 EMC: Year 2011, Month 2
32:00:00:02.743 EMC: Resynchronizing to Flare time: 86491093 ms; timestamp adjusted to: 0 ms.
02:00:00:00.225 EMC: New Day 2
02:00:00:00.579 EMC: Resynchronizing to Flare time: 172889687 ms; timestamp adjusted to: 0 ms.
03:00:00:00.270 EMC: New Day 3
03:00:00:02.041 EMC: Resynchronizing to Flare time: 259291562 ms; timestamp adjusted to: 0 ms.
04:00:00:00.013 EMC: New Day 4
04:00:00:00.968 EMC: Resynchronizing to Flare time: 345690156 ms; timestamp adjusted to: 0 ms.
05:00:00:00.185 EMC: New Day 5
05:00:00:03.515 EMC: Resynchronizing to Flare time: 432092062 ms; timestamp adjusted to: 0 ms.
05:08:08:47.811 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
05:08:08:47.835 EMC: DISPLAY command success, encl number=01, mode=4.
05:08:08:48.144 Setting CPLD activity LED mode to OR because both sides not being polled.
05:08:08:51.364 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
05:08:08:51.387 EMC: DISPLAY command success, encl number=01, mode=4.
05:08:08:51.693 Setting CPLD activity LED mode to AND because both sides being polled.
06:00:00:00.010 EMC: New Day 6
06:00:00:02.874 EMC: Resynchronizing to Flare time: 518490625 ms; timestamp adjusted to: 0 ms.
07:00:00:00.042 EMC: New Day 7
07:00:00:00.523 EMC: Resynchronizing to Flare time: 604889250 ms; timestamp adjusted to: 0 ms.
08:00:00:00.081 EMC: New Day 8
08:00:00:01.220 EMC: Resynchronizing to Flare time: 691291093 ms; timestamp adjusted to: 0 ms.
08:06:16:49.924 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
08:06:16:49.932 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
08:06:16:49.939 Setting CPLD activity LED mode to OR because both sides not being polled.
08:06:16:49.948 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
08:06:16:49.970 EMC: DISPLAY command success, encl number=01, mode=C.
08:06:16:50.015 EMC: Sending changed local info to peer.
08:06:16:53.201 EMC: Flare polling state restored because good generation number 0x2306 received.
08:06:16:53.209 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
08:06:16:53.216 Setting CPLD activity LED mode to AND because both sides being polled.
08:06:16:53.224 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
08:06:16:53.259 EMC: DISPLAY command success, encl number=01, mode=4.
08:06:16:53.279 EMC: Sending changed local info to peer.
08:06:16:53.293 EMC: Resynchronizing to Flare time: 713836562 ms; timestamp adjusted to: 0 ms.
09:00:00:00.104 EMC: New Day 9
09:00:00:00.535 EMC: Resynchronizing to Flare time: 777666718 ms; timestamp adjusted to: 0 ms.
09:10:36:31.671 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
09:10:36:31.678 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
09:10:36:31.685 Setting CPLD activity LED mode to OR because both sides not being polled.
09:10:36:31.695 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
09:10:36:31.717 EMC: DISPLAY command success, encl number=01, mode=C.
09:10:36:31.761 EMC: Sending changed local info to peer.
09:10:36:34.951 EMC: Flare polling state restored because good generation number 0x2306 received.
09:10:36:34.958 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
09:10:36:34.967 Setting CPLD activity LED mode to AND because both sides being polled.
09:10:36:34.974 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
09:10:36:35.004 EMC: DISPLAY command success, encl number=01, mode=4.
09:10:36:35.024 EMC: Sending changed local info to peer.
09:10:36:35.038 EMC: Resynchronizing to Flare time: 815834218 ms; timestamp adjusted to: 0 ms.
10:00:00:00.001 EMC: New Day 10
10:00:00:02.519 EMC: Resynchronizing to Flare time: 864052187 ms; timestamp adjusted to: 0 ms.
10:14:35:11.615 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
10:14:35:11.622 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
10:14:35:11.629 Setting CPLD activity LED mode to OR because both sides not being polled.
10:14:35:11.639 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
10:14:35:11.650 EMC: DISPLAY command success, encl number=01, mode=C.
10:14:35:11.695 EMC: Sending changed local info to peer.
10:14:35:14.892 EMC: Flare polling state restored because good generation number 0x2306 received.
10:14:35:14.901 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
10:14:35:14.908 Setting CPLD activity LED mode to AND because both sides being polled.
10:14:35:14.916 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
10:14:35:14.937 EMC: Sending changed local info to peer.
10:14:35:14.948 EMC: DISPLAY command success, encl number=01, mode=4.
10:14:35:14.979 EMC: Resynchronizing to Flare time: 916568593 ms; timestamp adjusted to: 0 ms.
10:14:36:09.848 EMC: ...read processing took 0 ms, status=Success
10:14:36:11.065 EMC: ...write took 1211 ms, status=Success
11:00:00:00.064 EMC: New Day 11
11:00:00:03.265 EMC: Resynchronizing to Flare time: 950437656 ms; timestamp adjusted to: 0 ms.
12:00:00:00.308 EMC: New Day 12
12:00:00:00.869 EMC: Resynchronizing to Flare time: 1036888750 ms; timestamp adjusted to: 0 ms.
12:05:19:09.561 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
12:05:19:09.569 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
12:05:19:09.576 Setting CPLD activity LED mode to OR because both sides not being polled.
12:05:19:09.585 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
12:05:19:09.607 EMC: DISPLAY command success, encl number=01, mode=C.
12:05:19:09.652 EMC: Sending changed local info to peer.
12:05:19:12.839 EMC: Flare polling state restored because good generation number 0x2306 received.
12:05:19:12.847 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
12:05:19:12.854 Setting CPLD activity LED mode to AND because both sides being polled.
12:05:19:12.862 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
12:05:19:12.893 EMC: DISPLAY command success, encl number=01, mode=4.
12:05:19:12.913 EMC: Sending changed local info to peer.
12:05:19:12.928 EMC: Resynchronizing to Flare time: 1055972500 ms; timestamp adjusted to: 0 ms.
13:00:00:00.228 EMC: New Day 13
13:00:00:01.817 EMC: Resynchronizing to Flare time: 1123270937 ms; timestamp adjusted to: 0 ms.
13:08:19:54.427 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
13:08:19:54.433 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
13:08:19:54.442 Setting CPLD activity LED mode to OR because both sides not being polled.
13:08:19:54.451 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
13:08:19:54.474 EMC: DISPLAY command success, encl number=01, mode=C.
13:08:19:54.517 EMC: Sending changed local info to peer.
13:08:19:57.705 EMC: Flare polling state restored because good generation number 0x2306 received.
13:08:19:57.713 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
13:08:19:57.721 Setting CPLD activity LED mode to AND because both sides being polled.
13:08:19:57.728 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
13:08:19:57.750 EMC: DISPLAY command success, encl number=01, mode=4.
13:08:19:57.785 EMC: Resynchronizing to Flare time: 1153228750 ms; timestamp adjusted to: 0 ms.
13:08:20:28.799 EMC: Sending changed local info to peer.
14:00:00:00.312 EMC: New Day 14
14:00:00:01.154 EMC: Resynchronizing to Flare time: 1209659687 ms; timestamp adjusted to: 0 ms.
15:00:00:00.312 EMC: New Day 15
15:00:00:01.897 EMC: Resynchronizing to Flare time: 1296091125 ms; timestamp adjusted to: 0 ms.
16:00:00:00.281 EMC: New Day 16
16:00:00:00.848 EMC: Resynchronizing to Flare time: 1382489687 ms; timestamp adjusted to: 0 ms.
17:00:00:00.128 EMC: New Day 17
17:00:00:03.448 EMC: Resynchronizing to Flare time: 1468891593 ms; timestamp adjusted to: 0 ms.
18:00:00:00.275 EMC: New Day 18
18:00:00:02.223 EMC: Resynchronizing to Flare time: 1555290156 ms; timestamp adjusted to: 0 ms.
18:14:44:46.926 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
18:14:44:46.948 EMC: DISPLAY command success, encl number=01, mode=4.
18:14:44:47.254 Setting CPLD activity LED mode to OR because both sides not being polled.
18:14:44:53.051 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
18:14:44:53.074 EMC: DISPLAY command success, encl number=01, mode=4.
18:14:44:53.383 Setting CPLD activity LED mode to AND because both sides being polled.
18:19:41:11.139 EMC: Sending changed local info to peer.
                                                                                                                                                                  

Buffer Type: SXP Trace
Buffer Id: 0
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 49th at 17:03:03.
00:00:00:01:265 EMC: Setting Update lock: 1
00:00:00:01:399 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:420 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:440 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:460 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:482 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:502 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:507 EMC: Failed to get Power Supply revision info.
00:00:00:01:514 EMC: SXP FW Version:   04.05
00:00:00:01:518 EMC: SXP BOOT Version: 03.00
00:00:00:01:522 EMC: SXP ISTR Version: 03.05
00:00:00:01:526 EMC: MC Version:       16.01
00:00:00:01:531 EMC: DLMC Version:     14.47
00:00:00:01:535 EMC: PS Version:       00.01
00:00:00:01:539 EMC: CPLD Version:     00.09
00:00:00:01:543 EMC: Base SAS Address: 50060480_00b680c0
00:00:00:01:548 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:557 EMC: Exception flag read from register is 0
00:00:00:00:985 EMC: Setting enclosure number to 255
00:00:00:01:005 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:01:026 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:049 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:069 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:090 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:112 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:119 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:142 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:165 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:185 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:239 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:259 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:265 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:287 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:308 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:330 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:350 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:370 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:375 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:383 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:01:389 EMC: Checking for updated FW!
00:00:00:01:393 EMC: Checking for SXP FW download
00:00:00:01:420 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:01:435 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:01:440 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:15:669 WDG EXPIRED: Elapsed time since last WDG run: 799 ms
00:00:00:15:674 WDG: Pong not received from: EMA
                                              

Buffer Type: SXP Trace
Buffer Id: 1
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 946
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:15.7
00:00:00:01:264 EMC: Setting Update lock: 1
00:00:00:01:350 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:384 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:404 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:424 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:445 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:467 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:472 EMC: Failed to get Power Supply revision info.
00:00:00:01:478 EMC: SXP FW Version:   04.05
00:00:00:01:483 EMC: SXP BOOT Version: 03.00
00:00:00:01:487 EMC: SXP ISTR Version: 03.05
00:00:00:01:491 EMC: MC Version:       16.01
00:00:00:01:497 EMC: DLMC Version:     14.47
00:00:00:01:501 EMC: PS Version:       00.01
00:00:00:01:505 EMC: CPLD Version:     00.13
00:00:00:15:768 WDG EXPIRED: Elapsed time since last WDG run: 229 ms
00:00:00:15:773 WDG: Pong not received from: EMA
                 

Buffer Type: SXP Trace
Buffer Id: 2
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:51.
00:00:00:01:263 EMC: Setting Update lock: 1
00:00:00:01:349 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:382 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:402 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:423 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:443 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:465 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:470 EMC: Failed to get Power Supply revision info.
00:00:00:01:476 EMC: SXP FW Version:   04.05
00:00:00:01:481 EMC: SXP BOOT Version: 03.00
00:00:00:01:485 EMC: SXP ISTR Version: 03.05
00:00:00:01:489 EMC: MC Version:       16.01
00:00:00:01:493 EMC: DLMC Version:     14.47
00:00:00:01:498 EMC: PS Version:       00.01
00:00:00:01:502 EMC: CPLD Version:     00.13
00:00:00:01:506 EMC: Base SAS Address: 50060480_00fa80c0
00:00:00:01:510 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:520 EMC: Exception flag read from register is 1
00:00:00:36:984 EMC: Setting enclosure number to 255
00:00:00:37:003 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:37:046 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:068 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:089 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:109 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:130 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:136 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:160 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:183 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:204 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:225 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:269 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:274 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:298 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:321 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:342 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:363 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:385 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:390 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:397 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:37:404 EMC: Checking for updated FW!
00:00:00:37:408 EMC: Checking for SXP FW download
00:00:00:37:436 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:37:451 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:37:456 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:51:683 WDG EXPIRED: Elapsed time since last WDG run: 792 ms
00:00:00:51:688 WDG: Pong not received from: EMA
                                              

Buffer Type: Expander Ring Buffer Trace
Buffer Id: 255
Source: Manual
SXP Major Rev: 04
SXP Minor Rev: 30
Length: -1
Timestamp: 03/03/2011 21:42:18
        
09:10:36:35.004 EMC: DISPLAY command success, encl number=01, mode=4.
09:10:36:35.024 EMC: Sending changed local info to peer.
09:10:36:35.038 EMC: Resynchronizing to Flare time: 815834218 ms; timestamp adjusted to: 0 ms.
10:00:00:00.001 EMC: New Day 10
10:00:00:02.519 EMC: Resynchronizing to Flare time: 864052187 ms; timestamp adjusted to: 0 ms.
10:14:35:11.615 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
10:14:35:11.622 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
10:14:35:11.629 Setting CPLD activity LED mode to OR because both sides not being polled.
10:14:35:11.639 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
10:14:35:11.650 EMC: DISPLAY command success, encl number=01, mode=C.
10:14:35:11.695 EMC: Sending changed local info to peer.
10:14:35:14.892 EMC: Flare polling state restored because good generation number 0x2306 received.
10:14:35:14.901 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
10:14:35:14.908 Setting CPLD activity LED mode to AND because both sides being polled.
10:14:35:14.916 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
10:14:35:14.937 EMC: Sending changed local info to peer.
10:14:35:14.948 EMC: DISPLAY command success, encl number=01, mode=4.
10:14:35:14.979 EMC: Resynchronizing to Flare time: 916568593 ms; timestamp adjusted to: 0 ms.
10:14:36:09.848 EMC: ...read processing took 0 ms, status=Success
10:14:36:11.065 EMC: ...write took 1211 ms, status=Success
11:00:00:00.064 EMC: New Day 11
11:00:00:03.265 EMC: Resynchronizing to Flare time: 950437656 ms; timestamp adjusted to: 0 ms.
12:00:00:00.308 EMC: New Day 12
12:00:00:00.869 EMC: Resynchronizing to Flare time: 1036888750 ms; timestamp adjusted to: 0 ms.
12:05:19:09.561 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
12:05:19:09.569 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
12:05:19:09.576 Setting CPLD activity LED mode to OR because both sides not being polled.
12:05:19:09.585 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
12:05:19:09.607 EMC: DISPLAY command success, encl number=01, mode=C.
12:05:19:09.652 EMC: Sending changed local info to peer.
12:05:19:12.839 EMC: Flare polling state restored because good generation number 0x2306 received.
12:05:19:12.847 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
12:05:19:12.854 Setting CPLD activity LED mode to AND because both sides being polled.
12:05:19:12.862 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
12:05:19:12.893 EMC: DISPLAY command success, encl number=01, mode=4.
12:05:19:12.913 EMC: Sending changed local info to peer.
12:05:19:12.928 EMC: Resynchronizing to Flare time: 1055972500 ms; timestamp adjusted to: 0 ms.
13:00:00:00.228 EMC: New Day 13
13:00:00:01.817 EMC: Resynchronizing to Flare time: 1123270937 ms; timestamp adjusted to: 0 ms.
13:08:19:54.427 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
13:08:19:54.433 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
13:08:19:54.442 Setting CPLD activity LED mode to OR because both sides not being polled.
13:08:19:54.451 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
13:08:19:54.474 EMC: DISPLAY command success, encl number=01, mode=C.
13:08:19:54.517 EMC: Sending changed local info to peer.
13:08:19:57.705 EMC: Flare polling state restored because good generation number 0x2306 received.
13:08:19:57.713 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
13:08:19:57.721 Setting CPLD activity LED mode to AND because both sides being polled.
13:08:19:57.728 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
13:08:19:57.750 EMC: DISPLAY command success, encl number=01, mode=4.
13:08:19:57.785 EMC: Resynchronizing to Flare time: 1153228750 ms; timestamp adjusted to: 0 ms.
13:08:20:28.799 EMC: Sending changed local info to peer.
14:00:00:00.312 EMC: New Day 14
14:00:00:01.154 EMC: Resynchronizing to Flare time: 1209659687 ms; timestamp adjusted to: 0 ms.
15:00:00:00.312 EMC: New Day 15
15:00:00:01.897 EMC: Resynchronizing to Flare time: 1296091125 ms; timestamp adjusted to: 0 ms.
16:00:00:00.281 EMC: New Day 16
16:00:00:00.848 EMC: Resynchronizing to Flare time: 1382489687 ms; timestamp adjusted to: 0 ms.
17:00:00:00.128 EMC: New Day 17
17:00:00:03.448 EMC: Resynchronizing to Flare time: 1468891593 ms; timestamp adjusted to: 0 ms.
18:00:00:00.275 EMC: New Day 18
18:00:00:02.223 EMC: Resynchronizing to Flare time: 1555290156 ms; timestamp adjusted to: 0 ms.
18:14:44:46.926 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
18:14:44:46.948 EMC: DISPLAY command success, encl number=01, mode=4.
18:14:44:47.254 Setting CPLD activity LED mode to OR because both sides not being polled.
18:14:44:53.051 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
18:14:44:53.074 EMC: DISPLAY command success, encl number=01, mode=4.
18:14:44:53.383 Setting CPLD activity LED mode to AND because both sides being polled.
18:19:41:10.965 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
18:19:41:10.973 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
18:19:41:10.981 Setting CPLD activity LED mode to OR because both sides not being polled.
18:19:41:10.991 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
18:19:41:11.026 EMC: DISPLAY command success, encl number=01, mode=C.
18:19:41:11.139 EMC: Sending changed local info to peer.
18:19:41:15.258 EMC: Flare polling state restored because good generation number 0x2306 received.
18:19:41:15.266 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
18:19:41:15.273 Setting CPLD activity LED mode to AND because both sides being polled.
18:19:41:15.281 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
18:19:41:15.304 EMC: DISPLAY command success, encl number=01, mode=4.
18:19:41:15.326 EMC: Resynchronizing to Flare time: 1626144875 ms; timestamp adjusted to: 0 ms.
18:19:42:25.077 EMC: Sending changed local info to peer.
18:19:42:30.089 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
18:19:42:30.097 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
18:19:42:30.105 Setting CPLD activity LED mode to OR because both sides not being polled.
18:19:42:30.115 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
18:19:42:30.153 EMC: DISPLAY command success, encl number=01, mode=C.
18:19:42:30.266 EMC: Sending changed local info to peer.
18:19:42:32.575 EMC: Flare polling state restored because good generation number 0x2306 received.
18:19:42:32.583 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
18:19:42:32.590 Setting CPLD activity LED mode to AND because both sides being polled.
18:19:42:32.598 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
18:19:42:32.620 EMC: DISPLAY command success, encl number=01, mode=4.
18:19:42:36.177 EMC: Sending changed local info to peer.
19:00:00:00.274 EMC: New Day 19
19:00:00:00.404 EMC: Resynchronizing to Flare time: 1641616562 ms; timestamp adjusted to: 0 ms.
20:00:00:00.043 EMC: New Day 20
20:00:00:00.817 EMC: Resynchronizing to Flare time: 1728090625 ms; timestamp adjusted to: 0 ms.
20:20:50:22.567 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
20:20:50:22.575 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
20:20:50:22.582 Setting CPLD activity LED mode to OR because both sides not being polled.
20:20:50:22.591 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
20:20:50:22.613 EMC: DISPLAY command success, encl number=01, mode=C.
20:20:50:22.658 EMC: Sending changed local info to peer.
20:20:50:23.864 EMC: ...read processing took 0 ms, status=Success
20:20:50:24.514 EMC: ...write took 645 ms, status=Success
20:20:50:25.846 EMC: Flare polling state restored because good generation number 0x2306 received.
20:20:50:25.854 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
20:20:50:25.861 Setting CPLD activity LED mode to AND because both sides being polled.
20:20:50:25.869 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
20:20:50:25.892 EMC: DISPLAY command success, encl number=01, mode=4.
20:20:50:25.915 EMC: Resynchronizing to Flare time: 1803103281 ms; timestamp adjusted to: 0 ms.
20:20:51:43.509 EMC: Sending changed local info to peer.
21:00:00:00.197 EMC: New Day 21
21:00:00:02.082 EMC: Resynchronizing to Flare time: 1814413750 ms; timestamp adjusted to: 0 ms.
21:18:54:22.333 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
21:18:54:22.356 EMC: DISPLAY command success, encl number=01, mode=4.
21:18:54:22.662 Setting CPLD activity LED mode to OR because both sides not being polled.
21:18:54:25.544 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
21:18:54:25.567 EMC: DISPLAY command success, encl number=01, mode=4.
21:18:54:25.867 Setting CPLD activity LED mode to AND because both sides being polled.
22:00:00:00.069 EMC: New Day 22
22:00:00:02.753 EMC: Resynchronizing to Flare time: 1900891125 ms; timestamp adjusted to: 0 ms.
23:00:00:00.046 EMC: New Day 23
23:00:00:02.004 EMC: Resynchronizing to Flare time: 1987289687 ms; timestamp adjusted to: 0 ms.
24:00:00:00.125 EMC: New Day 24
24:00:00:02.874 EMC: Resynchronizing to Flare time: 2073691562 ms; timestamp adjusted to: 0 ms.
25:00:00:00.305 EMC: New Day 25
25:00:00:00.638 EMC: Resynchronizing to Flare time: 2160090156 ms; timestamp adjusted to: 0 ms.
25:08:52:34.039 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
25:08:52:34.047 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
25:08:52:34.054 Setting CPLD activity LED mode to OR because both sides not being polled.
25:08:52:34.064 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
25:08:52:34.086 EMC: DISPLAY command success, encl number=01, mode=C.
25:08:52:34.120 EMC: Sending changed local info to peer.
25:08:52:37.318 EMC: Flare polling state restored because good generation number 0x2306 received.
25:08:52:37.326 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
25:08:52:37.333 Setting CPLD activity LED mode to AND because both sides being polled.
25:08:52:37.341 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
25:08:52:37.362 EMC: Sending changed local info to peer.
25:08:52:37.373 EMC: DISPLAY command success, encl number=01, mode=4.
25:08:52:37.414 EMC: Resynchronizing to Flare time: 2191990468 ms; timestamp adjusted to: 0 ms.
26:00:00:00.193 EMC: New Day 26
26:00:00:02.433 EMC: Resynchronizing to Flare time: 2246459218 ms; timestamp adjusted to: 0 ms.
27:00:00:00.084 EMC: New Day 27
27:00:00:01.533 EMC: Resynchronizing to Flare time: 2332890625 ms; timestamp adjusted to: 0 ms.
27:00:45:19.542 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
27:00:45:19.568 EMC: DISPLAY command success, encl number=01, mode=4.
27:00:45:19.879 Setting CPLD activity LED mode to OR because both sides not being polled.
27:00:45:22.794 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
27:00:45:22.816 EMC: DISPLAY command success, encl number=01, mode=4.
27:00:45:23.122 Setting CPLD activity LED mode to AND because both sides being polled.
28:00:00:00.213 EMC: New Day 28
28:00:00:01.322 EMC: Resynchronizing to Flare time: 2419289218 ms; timestamp adjusted to: 0 ms.
29:00:00:00.106 EMC: New Day 29
29:00:00:02.857 EMC: Year 2011, Month 3
29:00:00:02.876 EMC: Resynchronizing to Flare time: 86491093 ms; timestamp adjusted to: 0 ms.
02:00:00:00.203 EMC: New Day 2
02:00:00:00.623 EMC: Resynchronizing to Flare time: 172889687 ms; timestamp adjusted to: 0 ms.
03:00:00:00.245 EMC: New Day 3
03:00:00:01.993 EMC: Resynchronizing to Flare time: 259291562 ms; timestamp adjusted to: 0 ms.
                                                                                                                                                                 

Buffer Type: SXP Trace
Buffer Id: 0
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 49th at 17:03:03.
00:00:00:01:265 EMC: Setting Update lock: 1
00:00:00:01:399 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:420 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:440 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:460 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:482 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:502 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:507 EMC: Failed to get Power Supply revision info.
00:00:00:01:514 EMC: SXP FW Version:   04.05
00:00:00:01:518 EMC: SXP BOOT Version: 03.00
00:00:00:01:522 EMC: SXP ISTR Version: 03.05
00:00:00:01:526 EMC: MC Version:       16.01
00:00:00:01:531 EMC: DLMC Version:     14.47
00:00:00:01:535 EMC: PS Version:       00.01
00:00:00:01:539 EMC: CPLD Version:     00.09
00:00:00:01:543 EMC: Base SAS Address: 50060480_00b680c0
00:00:00:01:548 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:557 EMC: Exception flag read from register is 0
00:00:00:00:985 EMC: Setting enclosure number to 255
00:00:00:01:005 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:01:026 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:049 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:069 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:090 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:112 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:119 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:142 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:165 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:185 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:239 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:259 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:265 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:287 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:308 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:330 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:350 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:370 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:375 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:383 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:01:389 EMC: Checking for updated FW!
00:00:00:01:393 EMC: Checking for SXP FW download
00:00:00:01:420 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:01:435 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:01:440 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:15:669 WDG EXPIRED: Elapsed time since last WDG run: 799 ms
00:00:00:15:674 WDG: Pong not received from: EMA
                                              

Buffer Type: SXP Trace
Buffer Id: 1
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 946
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:15.7
00:00:00:01:264 EMC: Setting Update lock: 1
00:00:00:01:350 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:384 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:404 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:424 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:445 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:467 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:472 EMC: Failed to get Power Supply revision info.
00:00:00:01:478 EMC: SXP FW Version:   04.05
00:00:00:01:483 EMC: SXP BOOT Version: 03.00
00:00:00:01:487 EMC: SXP ISTR Version: 03.05
00:00:00:01:491 EMC: MC Version:       16.01
00:00:00:01:497 EMC: DLMC Version:     14.47
00:00:00:01:501 EMC: PS Version:       00.01
00:00:00:01:505 EMC: CPLD Version:     00.13
00:00:00:15:768 WDG EXPIRED: Elapsed time since last WDG run: 229 ms
00:00:00:15:773 WDG: Pong not received from: EMA
                 

Buffer Type: SXP Trace
Buffer Id: 2
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:51.
00:00:00:01:263 EMC: Setting Update lock: 1
00:00:00:01:349 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:382 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:402 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:423 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:443 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:465 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:470 EMC: Failed to get Power Supply revision info.
00:00:00:01:476 EMC: SXP FW Version:   04.05
00:00:00:01:481 EMC: SXP BOOT Version: 03.00
00:00:00:01:485 EMC: SXP ISTR Version: 03.05
00:00:00:01:489 EMC: MC Version:       16.01
00:00:00:01:493 EMC: DLMC Version:     14.47
00:00:00:01:498 EMC: PS Version:       00.01
00:00:00:01:502 EMC: CPLD Version:     00.13
00:00:00:01:506 EMC: Base SAS Address: 50060480_00fa80c0
00:00:00:01:510 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:520 EMC: Exception flag read from register is 1
00:00:00:36:984 EMC: Setting enclosure number to 255
00:00:00:37:003 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:37:046 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:068 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:089 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:109 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:130 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:136 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:160 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:183 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:204 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:225 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:269 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:274 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:298 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:321 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:342 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:363 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:385 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:390 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:397 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:37:404 EMC: Checking for updated FW!
00:00:00:37:408 EMC: Checking for SXP FW download
00:00:00:37:436 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:37:451 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:37:456 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:51:683 WDG EXPIRED: Elapsed time since last WDG run: 792 ms
00:00:00:51:688 WDG: Pong not received from: EMA
                                              

Buffer Type: Expander Ring Buffer Trace
Buffer Id: 255
Source: Manual
SXP Major Rev: 04
SXP Minor Rev: 30
Length: -1
Timestamp: 03/20/2011 14:42:19
        
18:19:42:30.115 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
18:19:42:30.153 EMC: DISPLAY command success, encl number=01, mode=C.
18:19:42:30.266 EMC: Sending changed local info to peer.
18:19:42:32.575 EMC: Flare polling state restored because good generation number 0x2306 received.
18:19:42:32.583 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
18:19:42:32.590 Setting CPLD activity LED mode to AND because both sides being polled.
18:19:42:32.598 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
18:19:42:32.620 EMC: DISPLAY command success, encl number=01, mode=4.
18:19:42:36.177 EMC: Sending changed local info to peer.
19:00:00:00.274 EMC: New Day 19
19:00:00:00.404 EMC: Resynchronizing to Flare time: 1641616562 ms; timestamp adjusted to: 0 ms.
20:00:00:00.043 EMC: New Day 20
20:00:00:00.817 EMC: Resynchronizing to Flare time: 1728090625 ms; timestamp adjusted to: 0 ms.
20:20:50:22.567 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
20:20:50:22.575 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
20:20:50:22.582 Setting CPLD activity LED mode to OR because both sides not being polled.
20:20:50:22.591 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
20:20:50:22.613 EMC: DISPLAY command success, encl number=01, mode=C.
20:20:50:22.658 EMC: Sending changed local info to peer.
20:20:50:23.864 EMC: ...read processing took 0 ms, status=Success
20:20:50:24.514 EMC: ...write took 645 ms, status=Success
20:20:50:25.846 EMC: Flare polling state restored because good generation number 0x2306 received.
20:20:50:25.854 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
20:20:50:25.861 Setting CPLD activity LED mode to AND because both sides being polled.
20:20:50:25.869 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
20:20:50:25.892 EMC: DISPLAY command success, encl number=01, mode=4.
20:20:50:25.915 EMC: Resynchronizing to Flare time: 1803103281 ms; timestamp adjusted to: 0 ms.
20:20:51:43.509 EMC: Sending changed local info to peer.
21:00:00:00.197 EMC: New Day 21
21:00:00:02.082 EMC: Resynchronizing to Flare time: 1814413750 ms; timestamp adjusted to: 0 ms.
21:18:54:22.333 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
21:18:54:22.356 EMC: DISPLAY command success, encl number=01, mode=4.
21:18:54:22.662 Setting CPLD activity LED mode to OR because both sides not being polled.
21:18:54:25.544 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
21:18:54:25.567 EMC: DISPLAY command success, encl number=01, mode=4.
21:18:54:25.867 Setting CPLD activity LED mode to AND because both sides being polled.
22:00:00:00.069 EMC: New Day 22
22:00:00:02.753 EMC: Resynchronizing to Flare time: 1900891125 ms; timestamp adjusted to: 0 ms.
23:00:00:00.046 EMC: New Day 23
23:00:00:02.004 EMC: Resynchronizing to Flare time: 1987289687 ms; timestamp adjusted to: 0 ms.
24:00:00:00.125 EMC: New Day 24
24:00:00:02.874 EMC: Resynchronizing to Flare time: 2073691562 ms; timestamp adjusted to: 0 ms.
25:00:00:00.305 EMC: New Day 25
25:00:00:00.638 EMC: Resynchronizing to Flare time: 2160090156 ms; timestamp adjusted to: 0 ms.
25:08:52:34.039 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
25:08:52:34.047 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
25:08:52:34.054 Setting CPLD activity LED mode to OR because both sides not being polled.
25:08:52:34.064 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
25:08:52:34.086 EMC: DISPLAY command success, encl number=01, mode=C.
25:08:52:34.120 EMC: Sending changed local info to peer.
25:08:52:37.318 EMC: Flare polling state restored because good generation number 0x2306 received.
25:08:52:37.326 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
25:08:52:37.333 Setting CPLD activity LED mode to AND because both sides being polled.
25:08:52:37.341 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
25:08:52:37.362 EMC: Sending changed local info to peer.
25:08:52:37.373 EMC: DISPLAY command success, encl number=01, mode=4.
25:08:52:37.414 EMC: Resynchronizing to Flare time: 2191990468 ms; timestamp adjusted to: 0 ms.
26:00:00:00.193 EMC: New Day 26
26:00:00:02.433 EMC: Resynchronizing to Flare time: 2246459218 ms; timestamp adjusted to: 0 ms.
27:00:00:00.084 EMC: New Day 27
27:00:00:01.533 EMC: Resynchronizing to Flare time: 2332890625 ms; timestamp adjusted to: 0 ms.
27:00:45:19.542 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
27:00:45:19.568 EMC: DISPLAY command success, encl number=01, mode=4.
27:00:45:19.879 Setting CPLD activity LED mode to OR because both sides not being polled.
27:00:45:22.794 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
27:00:45:22.816 EMC: DISPLAY command success, encl number=01, mode=4.
27:00:45:23.122 Setting CPLD activity LED mode to AND because both sides being polled.
28:00:00:00.213 EMC: New Day 28
28:00:00:01.322 EMC: Resynchronizing to Flare time: 2419289218 ms; timestamp adjusted to: 0 ms.
29:00:00:00.106 EMC: New Day 29
29:00:00:02.857 EMC: Year 2011, Month 3
29:00:00:02.876 EMC: Resynchronizing to Flare time: 86491093 ms; timestamp adjusted to: 0 ms.
02:00:00:00.203 EMC: New Day 2
02:00:00:00.623 EMC: Resynchronizing to Flare time: 172889687 ms; timestamp adjusted to: 0 ms.
03:00:00:00.245 EMC: New Day 3
03:00:00:01.993 EMC: Resynchronizing to Flare time: 259291562 ms; timestamp adjusted to: 0 ms.
04:00:00:00.048 EMC: New Day 4
04:00:00:00.940 EMC: Resynchronizing to Flare time: 345690156 ms; timestamp adjusted to: 0 ms.
05:00:00:00.642 EMC: New Day 5
05:00:00:03.375 EMC: Resynchronizing to Flare time: 432092046 ms; timestamp adjusted to: 0 ms.
06:00:00:00.153 EMC: New Day 6
06:00:00:02.881 EMC: Resynchronizing to Flare time: 518490625 ms; timestamp adjusted to: 0 ms.
07:00:00:00.272 EMC: New Day 7
07:00:00:01.168 EMC: Resynchronizing to Flare time: 604889250 ms; timestamp adjusted to: 0 ms.
08:00:00:00.112 EMC: New Day 8
08:00:00:01.770 EMC: Resynchronizing to Flare time: 691291093 ms; timestamp adjusted to: 0 ms.
08:13:20:11.830 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
08:13:20:11.854 EMC: DISPLAY command success, encl number=01, mode=4.
08:13:20:12.153 Setting CPLD activity LED mode to OR because both sides not being polled.
08:13:20:16.227 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
08:13:20:16.250 EMC: DISPLAY command success, encl number=01, mode=4.
08:13:20:16.563 Setting CPLD activity LED mode to AND because both sides being polled.
09:00:00:00.467 EMC: New Day 9
09:00:00:03.476 EMC: Resynchronizing to Flare time: 777692984 ms; timestamp adjusted to: 0 ms.
09:01:42:23.817 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
09:01:42:23.824 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
09:01:42:23.831 Setting CPLD activity LED mode to OR because both sides not being polled.
09:01:42:23.841 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
09:01:42:23.863 EMC: DISPLAY command success, encl number=01, mode=C.
09:01:42:23.910 EMC: Sending changed local info to peer.
09:01:42:27.092 EMC: Flare polling state restored because good generation number 0x2306 received.
09:01:42:27.101 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
09:01:42:27.108 Setting CPLD activity LED mode to AND because both sides being polled.
09:01:42:27.116 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
09:01:42:27.140 EMC: Sending changed local info to peer.
09:01:42:27.151 EMC: DISPLAY command success, encl number=01, mode=4.
09:01:42:27.182 EMC: Resynchronizing to Flare time: 783753437 ms; timestamp adjusted to: 0 ms.
10:00:00:00.205 EMC: New Day 10
10:00:00:02.365 EMC: Resynchronizing to Flare time: 864085000 ms; timestamp adjusted to: 0 ms.
11:00:00:00.005 EMC: New Day 11
11:00:00:01.955 EMC: Resynchronizing to Flare time: 950490156 ms; timestamp adjusted to: 0 ms.
11:02:06:35.817 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
11:02:06:35.840 EMC: DISPLAY command success, encl number=01, mode=4.
11:02:06:36.146 Setting CPLD activity LED mode to OR because both sides not being polled.
11:02:06:39.348 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
11:02:06:39.370 EMC: DISPLAY command success, encl number=01, mode=4.
11:02:06:39.668 Setting CPLD activity LED mode to AND because both sides being polled.
12:00:00:00.032 EMC: New Day 12
12:00:00:01.187 EMC: Resynchronizing to Flare time: 1036888750 ms; timestamp adjusted to: 0 ms.
13:00:00:00.298 EMC: New Day 13
13:00:00:01.935 EMC: Resynchronizing to Flare time: 1123290625 ms; timestamp adjusted to: 0 ms.
13:13:17:02.493 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
13:13:17:02.515 EMC: DISPLAY command success, encl number=01, mode=4.
13:13:17:02.821 Setting CPLD activity LED mode to OR because both sides not being polled.
13:13:17:06.043 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
13:13:17:06.067 EMC: DISPLAY command success, encl number=01, mode=4.
13:13:17:06.366 Setting CPLD activity LED mode to AND because both sides being polled.
13:23:13:46.225 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
13:23:13:46.247 EMC: DISPLAY command success, encl number=01, mode=4.
13:23:13:46.553 Setting CPLD activity LED mode to OR because both sides not being polled.
13:23:13:49.472 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
13:23:13:49.485 EMC: DISPLAY command success, encl number=01, mode=4.
13:23:13:49.792 Setting CPLD activity LED mode to AND because both sides being polled.
14:00:00:00.324 EMC: New Day 14
14:00:00:03.141 EMC: Resynchronizing to Flare time: 1209692500 ms; timestamp adjusted to: 0 ms.
15:00:00:00.009 EMC: New Day 15
15:00:00:01.668 EMC: Resynchronizing to Flare time: 1296091093 ms; timestamp adjusted to: 0 ms.
15:00:29:22.811 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
15:00:29:22.818 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
15:00:29:22.825 Setting CPLD activity LED mode to OR because both sides not being polled.
15:00:29:22.835 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
15:00:29:22.857 EMC: DISPLAY command success, encl number=01, mode=C.
15:00:29:22.905 EMC: Sending changed local info to peer.
15:00:29:23.804 EMC: ...read processing took 0 ms, status=Success
15:00:29:26.087 EMC: Flare polling state restored because good generation number 0x2306 received.
15:00:29:26.096 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
15:00:29:26.103 Setting CPLD activity LED mode to AND because both sides being polled.
15:00:29:26.111 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
15:00:29:26.133 EMC: DISPLAY command success, encl number=01, mode=4.
15:00:29:28.060 EMC: Sending changed local info to peer.
16:00:00:00.223 EMC: New Day 16
16:00:00:02.559 EMC: Resynchronizing to Flare time: 1382489687 ms; timestamp adjusted to: 0 ms.
17:00:00:00.063 EMC: New Day 17
17:00:00:00.448 EMC: Resynchronizing to Flare time: 1468888281 ms; timestamp adjusted to: 0 ms.
18:00:00:00.022 EMC: New Day 18
18:00:00:02.283 EMC: Resynchronizing to Flare time: 1555290156 ms; timestamp adjusted to: 0 ms.
19:00:00:00.046 EMC: New Day 19
19:00:00:03.281 EMC: Resynchronizing to Flare time: 1641692031 ms; timestamp adjusted to: 0 ms.
20:00:00:00.211 EMC: New Day 20
20:00:00:00.943 EMC: Resynchronizing to Flare time: 1728090625 ms; timestamp adjusted to: 0 ms.
                                                                                                                                                                 

Buffer Type: SXP Trace
Buffer Id: 0
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 49th at 17:03:03.
00:00:00:01:265 EMC: Setting Update lock: 1
00:00:00:01:399 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:420 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:440 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:460 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:482 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:502 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:507 EMC: Failed to get Power Supply revision info.
00:00:00:01:514 EMC: SXP FW Version:   04.05
00:00:00:01:518 EMC: SXP BOOT Version: 03.00
00:00:00:01:522 EMC: SXP ISTR Version: 03.05
00:00:00:01:526 EMC: MC Version:       16.01
00:00:00:01:531 EMC: DLMC Version:     14.47
00:00:00:01:535 EMC: PS Version:       00.01
00:00:00:01:539 EMC: CPLD Version:     00.09
00:00:00:01:543 EMC: Base SAS Address: 50060480_00b680c0
00:00:00:01:548 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:557 EMC: Exception flag read from register is 0
00:00:00:00:985 EMC: Setting enclosure number to 255
00:00:00:01:005 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:01:026 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:049 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:069 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:090 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:112 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:119 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:142 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:165 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:185 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:239 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:259 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:265 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:287 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:308 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:330 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:350 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:370 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:375 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:383 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:01:389 EMC: Checking for updated FW!
00:00:00:01:393 EMC: Checking for SXP FW download
00:00:00:01:420 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:01:435 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:01:440 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:15:669 WDG EXPIRED: Elapsed time since last WDG run: 799 ms
00:00:00:15:674 WDG: Pong not received from: EMA
                                              

Buffer Type: SXP Trace
Buffer Id: 1
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 946
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:15.7
00:00:00:01:264 EMC: Setting Update lock: 1
00:00:00:01:350 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:384 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:404 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:424 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:445 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:467 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:472 EMC: Failed to get Power Supply revision info.
00:00:00:01:478 EMC: SXP FW Version:   04.05
00:00:00:01:483 EMC: SXP BOOT Version: 03.00
00:00:00:01:487 EMC: SXP ISTR Version: 03.05
00:00:00:01:491 EMC: MC Version:       16.01
00:00:00:01:497 EMC: DLMC Version:     14.47
00:00:00:01:501 EMC: PS Version:       00.01
00:00:00:01:505 EMC: CPLD Version:     00.13
00:00:00:15:768 WDG EXPIRED: Elapsed time since last WDG run: 229 ms
00:00:00:15:773 WDG: Pong not received from: EMA
                 

Buffer Type: SXP Trace
Buffer Id: 2
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:51.
00:00:00:01:263 EMC: Setting Update lock: 1
00:00:00:01:349 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:382 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:402 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:423 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:443 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:465 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:470 EMC: Failed to get Power Supply revision info.
00:00:00:01:476 EMC: SXP FW Version:   04.05
00:00:00:01:481 EMC: SXP BOOT Version: 03.00
00:00:00:01:485 EMC: SXP ISTR Version: 03.05
00:00:00:01:489 EMC: MC Version:       16.01
00:00:00:01:493 EMC: DLMC Version:     14.47
00:00:00:01:498 EMC: PS Version:       00.01
00:00:00:01:502 EMC: CPLD Version:     00.13
00:00:00:01:506 EMC: Base SAS Address: 50060480_00fa80c0
00:00:00:01:510 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:520 EMC: Exception flag read from register is 1
00:00:00:36:984 EMC: Setting enclosure number to 255
00:00:00:37:003 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:37:046 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:068 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:089 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:109 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:130 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:136 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:160 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:183 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:204 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:225 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:269 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:274 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:298 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:321 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:342 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:363 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:385 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:390 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:397 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:37:404 EMC: Checking for updated FW!
00:00:00:37:408 EMC: Checking for SXP FW download
00:00:00:37:436 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:37:451 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:37:456 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:51:683 WDG EXPIRED: Elapsed time since last WDG run: 792 ms
00:00:00:51:688 WDG: Pong not received from: EMA
                                              

Buffer Type: Expander Ring Buffer Trace
Buffer Id: 255
Source: Manual
SXP Major Rev: 04
SXP Minor Rev: 30
Length: -1
Timestamp: 05/25/2011 08:42:22
        
12:00:00:00.083 EMC: New Day 12
12:00:00:01.614 EMC: Resynchronizing to Flare time: 1036891093 ms; timestamp adjusted to: 0 ms.
13:00:00:00.285 EMC: New Day 13
13:00:00:00.987 EMC: Resynchronizing to Flare time: 1123289687 ms; timestamp adjusted to: 0 ms.
14:00:00:00.272 EMC: New Day 14
14:00:00:03.483 EMC: Resynchronizing to Flare time: 1209691593 ms; timestamp adjusted to: 0 ms.
14:15:07:24.762 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
14:15:07:24.784 EMC: DISPLAY command success, encl number=01, mode=4.
14:15:07:25.090 Setting CPLD activity LED mode to OR because both sides not being polled.
14:15:07:28.631 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
14:15:07:28.654 EMC: DISPLAY command success, encl number=01, mode=4.
14:15:07:28.953 Setting CPLD activity LED mode to AND because both sides being polled.
15:00:00:00.209 EMC: New Day 15
15:00:00:02.336 EMC: Resynchronizing to Flare time: 1296090156 ms; timestamp adjusted to: 0 ms.
16:00:00:00.272 EMC: New Day 16
16:00:00:03.044 EMC: Resynchronizing to Flare time: 1382492062 ms; timestamp adjusted to: 0 ms.
17:00:00:00.208 EMC: New Day 17
17:00:00:00.754 EMC: Resynchronizing to Flare time: 1468890625 ms; timestamp adjusted to: 0 ms.
18:00:00:00.019 EMC: New Day 18
18:00:00:03.272 EMC: Resynchronizing to Flare time: 1555292500 ms; timestamp adjusted to: 0 ms.
19:00:00:00.122 EMC: New Day 19
19:00:00:02.433 EMC: Resynchronizing to Flare time: 1641691093 ms; timestamp adjusted to: 0 ms.
20:00:00:00.275 EMC: New Day 20
20:00:00:02.022 EMC: Resynchronizing to Flare time: 1728089687 ms; timestamp adjusted to: 0 ms.
21:00:00:00.166 EMC: New Day 21
21:00:00:03.143 EMC: Resynchronizing to Flare time: 1814491562 ms; timestamp adjusted to: 0 ms.
22:00:00:00.311 EMC: New Day 22
22:00:00:00.821 EMC: Resynchronizing to Flare time: 1900890156 ms; timestamp adjusted to: 0 ms.
23:00:00:00.320 EMC: New Day 23
23:00:00:02.306 EMC: Resynchronizing to Flare time: 1987292031 ms; timestamp adjusted to: 0 ms.
24:00:00:00.002 EMC: New Day 24
24:00:00:01.180 EMC: Resynchronizing to Flare time: 2073690625 ms; timestamp adjusted to: 0 ms.
25:00:00:00.302 EMC: New Day 25
25:00:00:01.163 EMC: Resynchronizing to Flare time: 2160089250 ms; timestamp adjusted to: 0 ms.
26:00:00:00.058 EMC: New Day 26
26:00:00:03.233 EMC: Resynchronizing to Flare time: 2246491125 ms; timestamp adjusted to: 0 ms.
27:00:00:00.297 EMC: New Day 27
27:00:00:00.886 EMC: Resynchronizing to Flare time: 2332889687 ms; timestamp adjusted to: 0 ms.
28:00:00:00.175 EMC: New Day 28
28:00:00:01.857 EMC: Resynchronizing to Flare time: 2419291562 ms; timestamp adjusted to: 0 ms.
29:00:00:00.735 EMC: New Day 29
29:00:00:03.834 EMC: Resynchronizing to Flare time: 2505693468 ms; timestamp adjusted to: 0 ms.
30:00:00:00.539 EMC: New Day 30
30:00:00:03.464 EMC: Resynchronizing to Flare time: 2592092062 ms; timestamp adjusted to: 0 ms.
31:00:00:00.573 EMC: New Day 31
31:00:00:02.480 EMC: Year 2011, Month 5
31:00:00:02.501 EMC: Resynchronizing to Flare time: 86490625 ms; timestamp adjusted to: 0 ms.
02:00:00:00.052 EMC: New Day 2
02:00:00:00.726 EMC: Resynchronizing to Flare time: 172889218 ms; timestamp adjusted to: 0 ms.
03:00:00:00.176 EMC: New Day 3
03:00:00:01.669 EMC: Resynchronizing to Flare time: 259291093 ms; timestamp adjusted to: 0 ms.
04:00:00:00.129 EMC: New Day 4
04:00:00:00.157 EMC: Resynchronizing to Flare time: 345689687 ms; timestamp adjusted to: 0 ms.
04:07:50:10.291 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
04:07:50:10.298 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
04:07:50:10.305 Setting CPLD activity LED mode to OR because both sides not being polled.
04:07:50:10.315 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
04:07:50:10.337 EMC: DISPLAY command success, encl number=01, mode=C.
04:07:50:10.382 EMC: Sending changed local info to peer.
04:07:50:13.570 EMC: Flare polling state restored because good generation number 0x2306 received.
04:07:50:13.579 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
04:07:50:13.586 Setting CPLD activity LED mode to AND because both sides being polled.
04:07:50:13.593 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
04:07:50:13.628 EMC: DISPLAY command success, encl number=01, mode=4.
04:07:50:13.663 EMC: Resynchronizing to Flare time: 373842812 ms; timestamp adjusted to: 0 ms.
04:07:50:42.861 EMC: Sending changed local info to peer.
04:15:39:20.410 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
04:15:39:20.417 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
04:15:39:20.424 Setting CPLD activity LED mode to OR because both sides not being polled.
04:15:39:20.433 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
04:15:39:20.455 EMC: DISPLAY command success, encl number=01, mode=C.
04:15:39:20.500 EMC: Sending changed local info to peer.
04:15:39:23.687 EMC: Flare polling state restored because good generation number 0x2306 received.
04:15:39:23.696 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
04:15:39:23.703 Setting CPLD activity LED mode to AND because both sides being polled.
04:15:39:23.711 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
04:15:39:23.712 EMC: Sending changed local info to peer.
04:15:39:23.723 EMC: DISPLAY command success, encl number=01, mode=4.
04:15:39:23.766 EMC: Resynchronizing to Flare time: 401992656 ms; timestamp adjusted to: 0 ms.
05:00:00:00.241 EMC: New Day 5
05:00:00:01.455 EMC: Resynchronizing to Flare time: 432032500 ms; timestamp adjusted to: 0 ms.
06:00:00:00.083 EMC: New Day 6
06:00:00:01.949 EMC: Resynchronizing to Flare time: 518490156 ms; timestamp adjusted to: 0 ms.
06:00:24:46.545 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
06:00:24:46.552 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
06:00:24:46.559 Setting CPLD activity LED mode to OR because both sides not being polled.
06:00:24:46.569 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:00:24:46.591 EMC: DISPLAY command success, encl number=01, mode=C.
06:00:24:46.638 EMC: Sending changed local info to peer.
06:00:24:49.823 EMC: Flare polling state restored because good generation number 0x2306 received.
06:00:24:49.832 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
06:00:24:49.839 Setting CPLD activity LED mode to AND because both sides being polled.
06:00:24:49.847 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:00:24:49.870 EMC: DISPLAY command success, encl number=01, mode=4.
06:00:24:51.496 EMC: Sending changed local info to peer.
07:00:00:00.048 EMC: New Day 7
07:00:00:02.473 EMC: Resynchronizing to Flare time: 604888750 ms; timestamp adjusted to: 0 ms.
07:03:06:50.744 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
07:03:06:50.751 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
07:03:06:50.758 Setting CPLD activity LED mode to OR because both sides not being polled.
07:03:06:50.767 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
07:03:06:50.790 EMC: DISPLAY command success, encl number=01, mode=C.
07:03:06:50.835 EMC: Sending changed local info to peer.
07:03:06:54.023 EMC: Flare polling state restored because good generation number 0x2306 received.
07:03:06:54.032 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
07:03:06:54.038 Setting CPLD activity LED mode to AND because both sides being polled.
07:03:06:54.046 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
07:03:06:54.081 EMC: DISPLAY command success, encl number=01, mode=4.
07:03:06:54.101 EMC: Sending changed local info to peer.
07:03:06:54.115 EMC: Resynchronizing to Flare time: 616025312 ms; timestamp adjusted to: 0 ms.
07:03:07:05.780 EMC: ...read processing took 0 ms, status=Success
08:00:00:00.054 EMC: New Day 8
08:00:00:00.188 EMC: Resynchronizing to Flare time: 691277500 ms; timestamp adjusted to: 0 ms.
09:00:00:00.304 EMC: New Day 9
09:00:00:02.778 EMC: Resynchronizing to Flare time: 777692500 ms; timestamp adjusted to: 0 ms.
10:00:00:00.138 EMC: New Day 10
10:00:00:01.460 EMC: Resynchronizing to Flare time: 864091093 ms; timestamp adjusted to: 0 ms.
10:04:56:41.162 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
10:04:56:41.186 EMC: DISPLAY command success, encl number=01, mode=4.
10:04:56:41.486 Setting CPLD activity LED mode to OR because both sides not being polled.
10:04:56:44.400 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
10:04:56:44.422 EMC: DISPLAY command success, encl number=01, mode=4.
10:04:56:44.720 Setting CPLD activity LED mode to AND because both sides being polled.
11:00:00:00.048 EMC: New Day 11
11:00:00:00.758 EMC: Resynchronizing to Flare time: 950489687 ms; timestamp adjusted to: 0 ms.
12:00:00:00.005 EMC: New Day 12
12:00:00:00.228 EMC: Resynchronizing to Flare time: 1036888281 ms; timestamp adjusted to: 0 ms.
13:00:00:00.160 EMC: New Day 13
13:00:00:02.109 EMC: Resynchronizing to Flare time: 1123290156 ms; timestamp adjusted to: 0 ms.
14:00:00:00.243 EMC: New Day 14
14:00:00:02.859 EMC: Resynchronizing to Flare time: 1209692062 ms; timestamp adjusted to: 0 ms.
15:00:00:00.117 EMC: New Day 15
15:00:00:00.837 EMC: Resynchronizing to Flare time: 1296090625 ms; timestamp adjusted to: 0 ms.
16:00:00:00.237 EMC: New Day 16
16:00:00:03.164 EMC: Resynchronizing to Flare time: 1382492500 ms; timestamp adjusted to: 0 ms.
17:00:00:00.730 EMC: New Day 17
17:00:00:02.567 EMC: Resynchronizing to Flare time: 1468891093 ms; timestamp adjusted to: 0 ms.
18:00:00:00.773 EMC: New Day 18
18:00:00:01.747 EMC: Resynchronizing to Flare time: 1555289687 ms; timestamp adjusted to: 0 ms.
19:00:00:00.264 EMC: New Day 19
19:00:00:03.287 EMC: Resynchronizing to Flare time: 1641691593 ms; timestamp adjusted to: 0 ms.
20:00:00:00.120 EMC: New Day 20
20:00:00:00.779 EMC: Resynchronizing to Flare time: 1728090156 ms; timestamp adjusted to: 0 ms.
21:00:00:00.002 EMC: New Day 21
21:00:00:02.277 EMC: Resynchronizing to Flare time: 1814492031 ms; timestamp adjusted to: 0 ms.
22:00:00:00.272 EMC: New Day 22
22:00:00:01.284 EMC: Resynchronizing to Flare time: 1900890625 ms; timestamp adjusted to: 0 ms.
22:03:09:51.267 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
22:03:09:51.290 EMC: DISPLAY command success, encl number=01, mode=4.
22:03:09:51.297 EMC: ...read processing took 31 ms, status=Success
22:03:09:52.273 Setting CPLD activity LED mode to OR because both sides not being polled.
22:03:09:54.577 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
22:03:09:54.601 EMC: DISPLAY command success, encl number=01, mode=4.
22:03:09:54.900 Setting CPLD activity LED mode to AND because both sides being polled.
23:00:00:00.162 EMC: New Day 23
23:00:00:00.891 EMC: Resynchronizing to Flare time: 1987289250 ms; timestamp adjusted to: 0 ms.
24:00:00:00.249 EMC: New Day 24
24:00:00:03.135 EMC: Resynchronizing to Flare time: 2073691125 ms; timestamp adjusted to: 0 ms.
25:00:00:00.830 EMC: New Day 25
25:00:00:00.984 EMC: Resynchronizing to Flare time: 2160089687 ms; timestamp adjusted to: 0 ms.
                                                                                                                                                                 

Buffer Type: SXP Trace
Buffer Id: 0
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 49th at 17:03:03.
00:00:00:01:265 EMC: Setting Update lock: 1
00:00:00:01:399 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:420 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:440 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:460 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:482 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:502 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:507 EMC: Failed to get Power Supply revision info.
00:00:00:01:514 EMC: SXP FW Version:   04.05
00:00:00:01:518 EMC: SXP BOOT Version: 03.00
00:00:00:01:522 EMC: SXP ISTR Version: 03.05
00:00:00:01:526 EMC: MC Version:       16.01
00:00:00:01:531 EMC: DLMC Version:     14.47
00:00:00:01:535 EMC: PS Version:       00.01
00:00:00:01:539 EMC: CPLD Version:     00.09
00:00:00:01:543 EMC: Base SAS Address: 50060480_00b680c0
00:00:00:01:548 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:557 EMC: Exception flag read from register is 0
00:00:00:00:985 EMC: Setting enclosure number to 255
00:00:00:01:005 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:01:026 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:049 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:069 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:090 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:112 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:119 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:142 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:165 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:185 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:239 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:259 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:265 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:287 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:308 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:330 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:350 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:370 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:375 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:383 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:01:389 EMC: Checking for updated FW!
00:00:00:01:393 EMC: Checking for SXP FW download
00:00:00:01:420 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:01:435 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:01:440 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:15:669 WDG EXPIRED: Elapsed time since last WDG run: 799 ms
00:00:00:15:674 WDG: Pong not received from: EMA
                                              

Buffer Type: SXP Trace
Buffer Id: 1
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 946
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:15.7
00:00:00:01:264 EMC: Setting Update lock: 1
00:00:00:01:350 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:384 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:404 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:424 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:445 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:467 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:472 EMC: Failed to get Power Supply revision info.
00:00:00:01:478 EMC: SXP FW Version:   04.05
00:00:00:01:483 EMC: SXP BOOT Version: 03.00
00:00:00:01:487 EMC: SXP ISTR Version: 03.05
00:00:00:01:491 EMC: MC Version:       16.01
00:00:00:01:497 EMC: DLMC Version:     14.47
00:00:00:01:501 EMC: PS Version:       00.01
00:00:00:01:505 EMC: CPLD Version:     00.13
00:00:00:15:768 WDG EXPIRED: Elapsed time since last WDG run: 229 ms
00:00:00:15:773 WDG: Pong not received from: EMA
                 

Buffer Type: SXP Trace
Buffer Id: 2
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:51.
00:00:00:01:263 EMC: Setting Update lock: 1
00:00:00:01:349 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:382 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:402 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:423 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:443 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:465 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:470 EMC: Failed to get Power Supply revision info.
00:00:00:01:476 EMC: SXP FW Version:   04.05
00:00:00:01:481 EMC: SXP BOOT Version: 03.00
00:00:00:01:485 EMC: SXP ISTR Version: 03.05
00:00:00:01:489 EMC: MC Version:       16.01
00:00:00:01:493 EMC: DLMC Version:     14.47
00:00:00:01:498 EMC: PS Version:       00.01
00:00:00:01:502 EMC: CPLD Version:     00.13
00:00:00:01:506 EMC: Base SAS Address: 50060480_00fa80c0
00:00:00:01:510 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:520 EMC: Exception flag read from register is 1
00:00:00:36:984 EMC: Setting enclosure number to 255
00:00:00:37:003 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:37:046 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:068 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:089 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:109 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:130 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:136 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:160 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:183 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:204 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:225 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:269 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:274 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:298 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:321 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:342 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:363 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:385 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:390 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:397 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:37:404 EMC: Checking for updated FW!
00:00:00:37:408 EMC: Checking for SXP FW download
00:00:00:37:436 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:37:451 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:37:456 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:51:683 WDG EXPIRED: Elapsed time since last WDG run: 792 ms
00:00:00:51:688 WDG: Pong not received from: EMA
                                              

Buffer Type: Expander Ring Buffer Trace
Buffer Id: 255
Source: Manual
SXP Major Rev: 04
SXP Minor Rev: 30
Length: -1
Timestamp: 05/31/2011 08:42:22
        
21:00:00:03.143 EMC: Resynchronizing to Flare time: 1814491562 ms; timestamp adjusted to: 0 ms.
22:00:00:00.311 EMC: New Day 22
22:00:00:00.821 EMC: Resynchronizing to Flare time: 1900890156 ms; timestamp adjusted to: 0 ms.
23:00:00:00.320 EMC: New Day 23
23:00:00:02.306 EMC: Resynchronizing to Flare time: 1987292031 ms; timestamp adjusted to: 0 ms.
24:00:00:00.002 EMC: New Day 24
24:00:00:01.180 EMC: Resynchronizing to Flare time: 2073690625 ms; timestamp adjusted to: 0 ms.
25:00:00:00.302 EMC: New Day 25
25:00:00:01.163 EMC: Resynchronizing to Flare time: 2160089250 ms; timestamp adjusted to: 0 ms.
26:00:00:00.058 EMC: New Day 26
26:00:00:03.233 EMC: Resynchronizing to Flare time: 2246491125 ms; timestamp adjusted to: 0 ms.
27:00:00:00.297 EMC: New Day 27
27:00:00:00.886 EMC: Resynchronizing to Flare time: 2332889687 ms; timestamp adjusted to: 0 ms.
28:00:00:00.175 EMC: New Day 28
28:00:00:01.857 EMC: Resynchronizing to Flare time: 2419291562 ms; timestamp adjusted to: 0 ms.
29:00:00:00.735 EMC: New Day 29
29:00:00:03.834 EMC: Resynchronizing to Flare time: 2505693468 ms; timestamp adjusted to: 0 ms.
30:00:00:00.539 EMC: New Day 30
30:00:00:03.464 EMC: Resynchronizing to Flare time: 2592092062 ms; timestamp adjusted to: 0 ms.
31:00:00:00.573 EMC: New Day 31
31:00:00:02.480 EMC: Year 2011, Month 5
31:00:00:02.501 EMC: Resynchronizing to Flare time: 86490625 ms; timestamp adjusted to: 0 ms.
02:00:00:00.052 EMC: New Day 2
02:00:00:00.726 EMC: Resynchronizing to Flare time: 172889218 ms; timestamp adjusted to: 0 ms.
03:00:00:00.176 EMC: New Day 3
03:00:00:01.669 EMC: Resynchronizing to Flare time: 259291093 ms; timestamp adjusted to: 0 ms.
04:00:00:00.129 EMC: New Day 4
04:00:00:00.157 EMC: Resynchronizing to Flare time: 345689687 ms; timestamp adjusted to: 0 ms.
04:07:50:10.291 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
04:07:50:10.298 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
04:07:50:10.305 Setting CPLD activity LED mode to OR because both sides not being polled.
04:07:50:10.315 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
04:07:50:10.337 EMC: DISPLAY command success, encl number=01, mode=C.
04:07:50:10.382 EMC: Sending changed local info to peer.
04:07:50:13.570 EMC: Flare polling state restored because good generation number 0x2306 received.
04:07:50:13.579 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
04:07:50:13.586 Setting CPLD activity LED mode to AND because both sides being polled.
04:07:50:13.593 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
04:07:50:13.628 EMC: DISPLAY command success, encl number=01, mode=4.
04:07:50:13.663 EMC: Resynchronizing to Flare time: 373842812 ms; timestamp adjusted to: 0 ms.
04:07:50:42.861 EMC: Sending changed local info to peer.
04:15:39:20.410 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
04:15:39:20.417 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
04:15:39:20.424 Setting CPLD activity LED mode to OR because both sides not being polled.
04:15:39:20.433 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
04:15:39:20.455 EMC: DISPLAY command success, encl number=01, mode=C.
04:15:39:20.500 EMC: Sending changed local info to peer.
04:15:39:23.687 EMC: Flare polling state restored because good generation number 0x2306 received.
04:15:39:23.696 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
04:15:39:23.703 Setting CPLD activity LED mode to AND because both sides being polled.
04:15:39:23.711 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
04:15:39:23.712 EMC: Sending changed local info to peer.
04:15:39:23.723 EMC: DISPLAY command success, encl number=01, mode=4.
04:15:39:23.766 EMC: Resynchronizing to Flare time: 401992656 ms; timestamp adjusted to: 0 ms.
05:00:00:00.241 EMC: New Day 5
05:00:00:01.455 EMC: Resynchronizing to Flare time: 432032500 ms; timestamp adjusted to: 0 ms.
06:00:00:00.083 EMC: New Day 6
06:00:00:01.949 EMC: Resynchronizing to Flare time: 518490156 ms; timestamp adjusted to: 0 ms.
06:00:24:46.545 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
06:00:24:46.552 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
06:00:24:46.559 Setting CPLD activity LED mode to OR because both sides not being polled.
06:00:24:46.569 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:00:24:46.591 EMC: DISPLAY command success, encl number=01, mode=C.
06:00:24:46.638 EMC: Sending changed local info to peer.
06:00:24:49.823 EMC: Flare polling state restored because good generation number 0x2306 received.
06:00:24:49.832 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
06:00:24:49.839 Setting CPLD activity LED mode to AND because both sides being polled.
06:00:24:49.847 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:00:24:49.870 EMC: DISPLAY command success, encl number=01, mode=4.
06:00:24:51.496 EMC: Sending changed local info to peer.
07:00:00:00.048 EMC: New Day 7
07:00:00:02.473 EMC: Resynchronizing to Flare time: 604888750 ms; timestamp adjusted to: 0 ms.
07:03:06:50.744 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
07:03:06:50.751 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
07:03:06:50.758 Setting CPLD activity LED mode to OR because both sides not being polled.
07:03:06:50.767 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
07:03:06:50.790 EMC: DISPLAY command success, encl number=01, mode=C.
07:03:06:50.835 EMC: Sending changed local info to peer.
07:03:06:54.023 EMC: Flare polling state restored because good generation number 0x2306 received.
07:03:06:54.032 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
07:03:06:54.038 Setting CPLD activity LED mode to AND because both sides being polled.
07:03:06:54.046 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
07:03:06:54.081 EMC: DISPLAY command success, encl number=01, mode=4.
07:03:06:54.101 EMC: Sending changed local info to peer.
07:03:06:54.115 EMC: Resynchronizing to Flare time: 616025312 ms; timestamp adjusted to: 0 ms.
07:03:07:05.780 EMC: ...read processing took 0 ms, status=Success
08:00:00:00.054 EMC: New Day 8
08:00:00:00.188 EMC: Resynchronizing to Flare time: 691277500 ms; timestamp adjusted to: 0 ms.
09:00:00:00.304 EMC: New Day 9
09:00:00:02.778 EMC: Resynchronizing to Flare time: 777692500 ms; timestamp adjusted to: 0 ms.
10:00:00:00.138 EMC: New Day 10
10:00:00:01.460 EMC: Resynchronizing to Flare time: 864091093 ms; timestamp adjusted to: 0 ms.
10:04:56:41.162 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
10:04:56:41.186 EMC: DISPLAY command success, encl number=01, mode=4.
10:04:56:41.486 Setting CPLD activity LED mode to OR because both sides not being polled.
10:04:56:44.400 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
10:04:56:44.422 EMC: DISPLAY command success, encl number=01, mode=4.
10:04:56:44.720 Setting CPLD activity LED mode to AND because both sides being polled.
11:00:00:00.048 EMC: New Day 11
11:00:00:00.758 EMC: Resynchronizing to Flare time: 950489687 ms; timestamp adjusted to: 0 ms.
12:00:00:00.005 EMC: New Day 12
12:00:00:00.228 EMC: Resynchronizing to Flare time: 1036888281 ms; timestamp adjusted to: 0 ms.
13:00:00:00.160 EMC: New Day 13
13:00:00:02.109 EMC: Resynchronizing to Flare time: 1123290156 ms; timestamp adjusted to: 0 ms.
14:00:00:00.243 EMC: New Day 14
14:00:00:02.859 EMC: Resynchronizing to Flare time: 1209692062 ms; timestamp adjusted to: 0 ms.
15:00:00:00.117 EMC: New Day 15
15:00:00:00.837 EMC: Resynchronizing to Flare time: 1296090625 ms; timestamp adjusted to: 0 ms.
16:00:00:00.237 EMC: New Day 16
16:00:00:03.164 EMC: Resynchronizing to Flare time: 1382492500 ms; timestamp adjusted to: 0 ms.
17:00:00:00.730 EMC: New Day 17
17:00:00:02.567 EMC: Resynchronizing to Flare time: 1468891093 ms; timestamp adjusted to: 0 ms.
18:00:00:00.773 EMC: New Day 18
18:00:00:01.747 EMC: Resynchronizing to Flare time: 1555289687 ms; timestamp adjusted to: 0 ms.
19:00:00:00.264 EMC: New Day 19
19:00:00:03.287 EMC: Resynchronizing to Flare time: 1641691593 ms; timestamp adjusted to: 0 ms.
20:00:00:00.120 EMC: New Day 20
20:00:00:00.779 EMC: Resynchronizing to Flare time: 1728090156 ms; timestamp adjusted to: 0 ms.
21:00:00:00.002 EMC: New Day 21
21:00:00:02.277 EMC: Resynchronizing to Flare time: 1814492031 ms; timestamp adjusted to: 0 ms.
22:00:00:00.272 EMC: New Day 22
22:00:00:01.284 EMC: Resynchronizing to Flare time: 1900890625 ms; timestamp adjusted to: 0 ms.
22:03:09:51.267 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
22:03:09:51.290 EMC: DISPLAY command success, encl number=01, mode=4.
22:03:09:51.297 EMC: ...read processing took 31 ms, status=Success
22:03:09:52.273 Setting CPLD activity LED mode to OR because both sides not being polled.
22:03:09:54.577 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
22:03:09:54.601 EMC: DISPLAY command success, encl number=01, mode=4.
22:03:09:54.900 Setting CPLD activity LED mode to AND because both sides being polled.
23:00:00:00.162 EMC: New Day 23
23:00:00:00.891 EMC: Resynchronizing to Flare time: 1987289250 ms; timestamp adjusted to: 0 ms.
24:00:00:00.249 EMC: New Day 24
24:00:00:03.135 EMC: Resynchronizing to Flare time: 2073691125 ms; timestamp adjusted to: 0 ms.
25:00:00:00.830 EMC: New Day 25
25:00:00:00.984 EMC: Resynchronizing to Flare time: 2160089687 ms; timestamp adjusted to: 0 ms.
26:00:00:00.296 EMC: New Day 26
26:00:00:01.989 EMC: Resynchronizing to Flare time: 2246491562 ms; timestamp adjusted to: 0 ms.
27:00:00:00.144 EMC: New Day 27
27:00:00:00.714 EMC: Resynchronizing to Flare time: 2332890156 ms; timestamp adjusted to: 0 ms.
28:00:00:00.090 EMC: New Day 28
28:00:00:00.194 EMC: Resynchronizing to Flare time: 2419288750 ms; timestamp adjusted to: 0 ms.
29:00:00:00.184 EMC: New Day 29
29:00:00:02.602 EMC: Resynchronizing to Flare time: 2505690625 ms; timestamp adjusted to: 0 ms.
30:00:00:00.224 EMC: New Day 30
30:00:00:01.116 EMC: Resynchronizing to Flare time: 2592089250 ms; timestamp adjusted to: 0 ms.
31:00:00:00.022 EMC: New Day 31
31:00:00:01.870 EMC: Resynchronizing to Flare time: 2678491125 ms; timestamp adjusted to: 0 ms.
31:08:15:42.317 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
31:08:15:42.323 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
31:08:15:42.332 Setting CPLD activity LED mode to OR because both sides not being polled.
31:08:15:42.341 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
31:08:15:42.365 EMC: DISPLAY command success, encl number=01, mode=C.
31:08:15:42.408 EMC: Sending changed local info to peer.
31:08:15:45.594 EMC: Flare polling state restored because good generation number 0x2306 received.
31:08:15:45.602 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
31:08:15:45.610 Setting CPLD activity LED mode to AND because both sides being polled.
31:08:15:45.617 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
31:08:15:45.657 EMC: DISPLAY command success, encl number=01, mode=4.
31:08:15:45.677 EMC: Sending changed local info to peer.
31:08:15:45.692 EMC: Resynchronizing to Flare time: 2708176562 ms; timestamp adjusted to: 0 ms.
                                                                                                                                                                 

Buffer Type: SXP Trace
Buffer Id: 0
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 49th at 17:03:03.
00:00:00:01:265 EMC: Setting Update lock: 1
00:00:00:01:399 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:420 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:440 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:460 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:482 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:502 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:507 EMC: Failed to get Power Supply revision info.
00:00:00:01:514 EMC: SXP FW Version:   04.05
00:00:00:01:518 EMC: SXP BOOT Version: 03.00
00:00:00:01:522 EMC: SXP ISTR Version: 03.05
00:00:00:01:526 EMC: MC Version:       16.01
00:00:00:01:531 EMC: DLMC Version:     14.47
00:00:00:01:535 EMC: PS Version:       00.01
00:00:00:01:539 EMC: CPLD Version:     00.09
00:00:00:01:543 EMC: Base SAS Address: 50060480_00b680c0
00:00:00:01:548 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:557 EMC: Exception flag read from register is 0
00:00:00:00:985 EMC: Setting enclosure number to 255
00:00:00:01:005 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:01:026 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:049 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:069 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:090 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:112 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:119 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:142 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:165 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:185 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:239 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:259 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:265 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:287 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:308 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:330 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:350 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:370 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:375 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:383 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:01:389 EMC: Checking for updated FW!
00:00:00:01:393 EMC: Checking for SXP FW download
00:00:00:01:420 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:01:435 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:01:440 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:15:669 WDG EXPIRED: Elapsed time since last WDG run: 799 ms
00:00:00:15:674 WDG: Pong not received from: EMA
                                              

Buffer Type: SXP Trace
Buffer Id: 1
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 946
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:15.7
00:00:00:01:264 EMC: Setting Update lock: 1
00:00:00:01:350 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:384 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:404 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:424 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:445 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:467 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:472 EMC: Failed to get Power Supply revision info.
00:00:00:01:478 EMC: SXP FW Version:   04.05
00:00:00:01:483 EMC: SXP BOOT Version: 03.00
00:00:00:01:487 EMC: SXP ISTR Version: 03.05
00:00:00:01:491 EMC: MC Version:       16.01
00:00:00:01:497 EMC: DLMC Version:     14.47
00:00:00:01:501 EMC: PS Version:       00.01
00:00:00:01:505 EMC: CPLD Version:     00.13
00:00:00:15:768 WDG EXPIRED: Elapsed time since last WDG run: 229 ms
00:00:00:15:773 WDG: Pong not received from: EMA
                 

Buffer Type: SXP Trace
Buffer Id: 2
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:51.
00:00:00:01:263 EMC: Setting Update lock: 1
00:00:00:01:349 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:382 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:402 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:423 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:443 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:465 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:470 EMC: Failed to get Power Supply revision info.
00:00:00:01:476 EMC: SXP FW Version:   04.05
00:00:00:01:481 EMC: SXP BOOT Version: 03.00
00:00:00:01:485 EMC: SXP ISTR Version: 03.05
00:00:00:01:489 EMC: MC Version:       16.01
00:00:00:01:493 EMC: DLMC Version:     14.47
00:00:00:01:498 EMC: PS Version:       00.01
00:00:00:01:502 EMC: CPLD Version:     00.13
00:00:00:01:506 EMC: Base SAS Address: 50060480_00fa80c0
00:00:00:01:510 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:520 EMC: Exception flag read from register is 1
00:00:00:36:984 EMC: Setting enclosure number to 255
00:00:00:37:003 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:37:046 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:068 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:089 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:109 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:130 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:136 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:160 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:183 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:204 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:225 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:269 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:274 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:298 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:321 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:342 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:363 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:385 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:390 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:397 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:37:404 EMC: Checking for updated FW!
00:00:00:37:408 EMC: Checking for SXP FW download
00:00:00:37:436 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:37:451 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:37:456 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:51:683 WDG EXPIRED: Elapsed time since last WDG run: 792 ms
00:00:00:51:688 WDG: Pong not received from: EMA
                                              

Buffer Type: Expander Ring Buffer Trace
Buffer Id: 255
Source: Manual
SXP Major Rev: 04
SXP Minor Rev: 30
Length: -1
Timestamp: 06/05/2011 02:42:21
        
06:00:24:46.638 EMC: Sending changed local info to peer.
06:00:24:49.823 EMC: Flare polling state restored because good generation number 0x2306 received.
06:00:24:49.832 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
06:00:24:49.839 Setting CPLD activity LED mode to AND because both sides being polled.
06:00:24:49.847 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:00:24:49.870 EMC: DISPLAY command success, encl number=01, mode=4.
06:00:24:51.496 EMC: Sending changed local info to peer.
07:00:00:00.048 EMC: New Day 7
07:00:00:02.473 EMC: Resynchronizing to Flare time: 604888750 ms; timestamp adjusted to: 0 ms.
07:03:06:50.744 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
07:03:06:50.751 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
07:03:06:50.758 Setting CPLD activity LED mode to OR because both sides not being polled.
07:03:06:50.767 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
07:03:06:50.790 EMC: DISPLAY command success, encl number=01, mode=C.
07:03:06:50.835 EMC: Sending changed local info to peer.
07:03:06:54.023 EMC: Flare polling state restored because good generation number 0x2306 received.
07:03:06:54.032 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
07:03:06:54.038 Setting CPLD activity LED mode to AND because both sides being polled.
07:03:06:54.046 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
07:03:06:54.081 EMC: DISPLAY command success, encl number=01, mode=4.
07:03:06:54.101 EMC: Sending changed local info to peer.
07:03:06:54.115 EMC: Resynchronizing to Flare time: 616025312 ms; timestamp adjusted to: 0 ms.
07:03:07:05.780 EMC: ...read processing took 0 ms, status=Success
08:00:00:00.054 EMC: New Day 8
08:00:00:00.188 EMC: Resynchronizing to Flare time: 691277500 ms; timestamp adjusted to: 0 ms.
09:00:00:00.304 EMC: New Day 9
09:00:00:02.778 EMC: Resynchronizing to Flare time: 777692500 ms; timestamp adjusted to: 0 ms.
10:00:00:00.138 EMC: New Day 10
10:00:00:01.460 EMC: Resynchronizing to Flare time: 864091093 ms; timestamp adjusted to: 0 ms.
10:04:56:41.162 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
10:04:56:41.186 EMC: DISPLAY command success, encl number=01, mode=4.
10:04:56:41.486 Setting CPLD activity LED mode to OR because both sides not being polled.
10:04:56:44.400 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
10:04:56:44.422 EMC: DISPLAY command success, encl number=01, mode=4.
10:04:56:44.720 Setting CPLD activity LED mode to AND because both sides being polled.
11:00:00:00.048 EMC: New Day 11
11:00:00:00.758 EMC: Resynchronizing to Flare time: 950489687 ms; timestamp adjusted to: 0 ms.
12:00:00:00.005 EMC: New Day 12
12:00:00:00.228 EMC: Resynchronizing to Flare time: 1036888281 ms; timestamp adjusted to: 0 ms.
13:00:00:00.160 EMC: New Day 13
13:00:00:02.109 EMC: Resynchronizing to Flare time: 1123290156 ms; timestamp adjusted to: 0 ms.
14:00:00:00.243 EMC: New Day 14
14:00:00:02.859 EMC: Resynchronizing to Flare time: 1209692062 ms; timestamp adjusted to: 0 ms.
15:00:00:00.117 EMC: New Day 15
15:00:00:00.837 EMC: Resynchronizing to Flare time: 1296090625 ms; timestamp adjusted to: 0 ms.
16:00:00:00.237 EMC: New Day 16
16:00:00:03.164 EMC: Resynchronizing to Flare time: 1382492500 ms; timestamp adjusted to: 0 ms.
17:00:00:00.730 EMC: New Day 17
17:00:00:02.567 EMC: Resynchronizing to Flare time: 1468891093 ms; timestamp adjusted to: 0 ms.
18:00:00:00.773 EMC: New Day 18
18:00:00:01.747 EMC: Resynchronizing to Flare time: 1555289687 ms; timestamp adjusted to: 0 ms.
19:00:00:00.264 EMC: New Day 19
19:00:00:03.287 EMC: Resynchronizing to Flare time: 1641691593 ms; timestamp adjusted to: 0 ms.
20:00:00:00.120 EMC: New Day 20
20:00:00:00.779 EMC: Resynchronizing to Flare time: 1728090156 ms; timestamp adjusted to: 0 ms.
21:00:00:00.002 EMC: New Day 21
21:00:00:02.277 EMC: Resynchronizing to Flare time: 1814492031 ms; timestamp adjusted to: 0 ms.
22:00:00:00.272 EMC: New Day 22
22:00:00:01.284 EMC: Resynchronizing to Flare time: 1900890625 ms; timestamp adjusted to: 0 ms.
22:03:09:51.267 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
22:03:09:51.290 EMC: DISPLAY command success, encl number=01, mode=4.
22:03:09:51.297 EMC: ...read processing took 31 ms, status=Success
22:03:09:52.273 Setting CPLD activity LED mode to OR because both sides not being polled.
22:03:09:54.577 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
22:03:09:54.601 EMC: DISPLAY command success, encl number=01, mode=4.
22:03:09:54.900 Setting CPLD activity LED mode to AND because both sides being polled.
23:00:00:00.162 EMC: New Day 23
23:00:00:00.891 EMC: Resynchronizing to Flare time: 1987289250 ms; timestamp adjusted to: 0 ms.
24:00:00:00.249 EMC: New Day 24
24:00:00:03.135 EMC: Resynchronizing to Flare time: 2073691125 ms; timestamp adjusted to: 0 ms.
25:00:00:00.830 EMC: New Day 25
25:00:00:00.984 EMC: Resynchronizing to Flare time: 2160089687 ms; timestamp adjusted to: 0 ms.
26:00:00:00.296 EMC: New Day 26
26:00:00:01.989 EMC: Resynchronizing to Flare time: 2246491562 ms; timestamp adjusted to: 0 ms.
27:00:00:00.144 EMC: New Day 27
27:00:00:00.714 EMC: Resynchronizing to Flare time: 2332890156 ms; timestamp adjusted to: 0 ms.
28:00:00:00.090 EMC: New Day 28
28:00:00:00.194 EMC: Resynchronizing to Flare time: 2419288750 ms; timestamp adjusted to: 0 ms.
29:00:00:00.184 EMC: New Day 29
29:00:00:02.602 EMC: Resynchronizing to Flare time: 2505690625 ms; timestamp adjusted to: 0 ms.
30:00:00:00.224 EMC: New Day 30
30:00:00:01.116 EMC: Resynchronizing to Flare time: 2592089250 ms; timestamp adjusted to: 0 ms.
31:00:00:00.022 EMC: New Day 31
31:00:00:01.870 EMC: Resynchronizing to Flare time: 2678491125 ms; timestamp adjusted to: 0 ms.
31:08:15:42.317 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
31:08:15:42.323 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
31:08:15:42.332 Setting CPLD activity LED mode to OR because both sides not being polled.
31:08:15:42.341 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
31:08:15:42.365 EMC: DISPLAY command success, encl number=01, mode=C.
31:08:15:42.408 EMC: Sending changed local info to peer.
31:08:15:45.594 EMC: Flare polling state restored because good generation number 0x2306 received.
31:08:15:45.602 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
31:08:15:45.610 Setting CPLD activity LED mode to AND because both sides being polled.
31:08:15:45.617 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
31:08:15:45.657 EMC: DISPLAY command success, encl number=01, mode=4.
31:08:15:45.677 EMC: Sending changed local info to peer.
31:08:15:45.692 EMC: Resynchronizing to Flare time: 2708176562 ms; timestamp adjusted to: 0 ms.
31:08:42:31.736 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
31:08:42:31.744 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
31:08:42:31.753 Setting CPLD activity LED mode to OR because both sides not being polled.
31:08:42:31.764 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
31:08:42:31.798 EMC: DISPLAY command success, encl number=01, mode=C.
31:08:42:31.912 EMC: Sending changed local info to peer.
31:08:42:37.788 EMC: Flare polling state restored because good generation number 0x2306 received.
31:08:42:37.797 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
31:08:42:37.804 Setting CPLD activity LED mode to AND because both sides being polled.
31:08:42:37.808 EMC: Sending changed local info to peer.
31:08:42:37.811 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
31:08:42:37.849 EMC: DISPLAY command success, encl number=01, mode=4.
31:08:46:06.123 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
31:08:46:06.149 EMC: DISPLAY command success, encl number=01, mode=4.
31:08:46:06.459 Setting CPLD activity LED mode to OR because both sides not being polled.
31:08:46:10.298 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
31:08:46:10.321 EMC: DISPLAY command success, encl number=01, mode=4.
31:08:46:10.621 Setting CPLD activity LED mode to AND because both sides being polled.
31:08:46:19.170 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
31:08:46:19.193 EMC: DISPLAY command success, encl number=01, mode=4.
31:08:46:19.198 EMC: ...read processing took 29 ms, status=Success
31:08:46:20.181 Setting CPLD activity LED mode to OR because both sides not being polled.
31:08:46:21.167 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
31:08:46:21.193 EMC: DISPLAY command success, encl number=01, mode=4.
31:08:46:21.502 Setting CPLD activity LED mode to AND because both sides being polled.
32:00:00:00.188 EMC: New Day 32
32:00:00:02.387 EMC: Year 2011, Month 6
32:00:00:02.407 EMC: Resynchronizing to Flare time: 86463437 ms; timestamp adjusted to: 0 ms.
02:00:00:00.221 EMC: New Day 2
02:00:00:02.016 EMC: Resynchronizing to Flare time: 172891562 ms; timestamp adjusted to: 0 ms.
02:03:22:07.993 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
02:03:22:08.001 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
02:03:22:08.008 Setting CPLD activity LED mode to OR because both sides not being polled.
02:03:22:08.018 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
02:03:22:08.042 EMC: DISPLAY command success, encl number=01, mode=C.
02:03:22:08.087 EMC: Sending changed local info to peer.
02:03:22:11.273 EMC: Flare polling state restored because good generation number 0x2306 received.
02:03:22:11.282 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
02:03:22:11.290 Setting CPLD activity LED mode to AND because both sides being polled.
02:03:22:11.297 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
02:03:22:11.318 EMC: Sending changed local info to peer.
02:03:22:11.329 EMC: DISPLAY command success, encl number=01, mode=4.
02:03:22:11.369 EMC: Resynchronizing to Flare time: 184943593 ms; timestamp adjusted to: 0 ms.
02:14:42:06.907 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
02:14:42:06.914 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
02:14:42:06.921 Setting CPLD activity LED mode to OR because both sides not being polled.
02:14:42:06.931 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
02:14:42:06.953 EMC: DISPLAY command success, encl number=01, mode=C.
02:14:42:07.001 EMC: Sending changed local info to peer.
02:14:42:07.442 EMC: ...read processing took 0 ms, status=Success
02:14:42:10.185 EMC: Flare polling state restored because good generation number 0x2306 received.
02:14:42:10.194 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
02:14:42:10.201 Setting CPLD activity LED mode to AND because both sides being polled.
02:14:42:10.209 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
02:14:42:10.232 EMC: DISPLAY command success, encl number=01, mode=4.
02:14:42:10.256 EMC: Resynchronizing to Flare time: 225772187 ms; timestamp adjusted to: 0 ms.
02:14:42:52.351 EMC: Sending changed local info to peer.
03:00:00:00.034 EMC: New Day 3
03:00:00:00.337 EMC: Resynchronizing to Flare time: 259234375 ms; timestamp adjusted to: 0 ms.
04:00:00:00.139 EMC: New Day 4
04:00:00:00.883 EMC: Resynchronizing to Flare time: 345688750 ms; timestamp adjusted to: 0 ms.
05:00:00:00.154 EMC: New Day 5
05:00:00:02.050 EMC: Resynchronizing to Flare time: 432090625 ms; timestamp adjusted to: 0 ms.
                                                                                                                                                                 

Buffer Type: SXP Trace
Buffer Id: 0
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 49th at 17:03:03.
00:00:00:01:265 EMC: Setting Update lock: 1
00:00:00:01:399 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:420 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:440 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:460 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:482 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:502 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:507 EMC: Failed to get Power Supply revision info.
00:00:00:01:514 EMC: SXP FW Version:   04.05
00:00:00:01:518 EMC: SXP BOOT Version: 03.00
00:00:00:01:522 EMC: SXP ISTR Version: 03.05
00:00:00:01:526 EMC: MC Version:       16.01
00:00:00:01:531 EMC: DLMC Version:     14.47
00:00:00:01:535 EMC: PS Version:       00.01
00:00:00:01:539 EMC: CPLD Version:     00.09
00:00:00:01:543 EMC: Base SAS Address: 50060480_00b680c0
00:00:00:01:548 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:557 EMC: Exception flag read from register is 0
00:00:00:00:985 EMC: Setting enclosure number to 255
00:00:00:01:005 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:01:026 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:049 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:069 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:090 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:112 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:119 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:142 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:165 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:185 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:239 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:259 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:265 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:287 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:308 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:330 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:350 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:370 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:375 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:383 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:01:389 EMC: Checking for updated FW!
00:00:00:01:393 EMC: Checking for SXP FW download
00:00:00:01:420 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:01:435 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:01:440 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:15:669 WDG EXPIRED: Elapsed time since last WDG run: 799 ms
00:00:00:15:674 WDG: Pong not received from: EMA
                                              

Buffer Type: SXP Trace
Buffer Id: 1
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 946
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:15.7
00:00:00:01:264 EMC: Setting Update lock: 1
00:00:00:01:350 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:384 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:404 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:424 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:445 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:467 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:472 EMC: Failed to get Power Supply revision info.
00:00:00:01:478 EMC: SXP FW Version:   04.05
00:00:00:01:483 EMC: SXP BOOT Version: 03.00
00:00:00:01:487 EMC: SXP ISTR Version: 03.05
00:00:00:01:491 EMC: MC Version:       16.01
00:00:00:01:497 EMC: DLMC Version:     14.47
00:00:00:01:501 EMC: PS Version:       00.01
00:00:00:01:505 EMC: CPLD Version:     00.13
00:00:00:15:768 WDG EXPIRED: Elapsed time since last WDG run: 229 ms
00:00:00:15:773 WDG: Pong not received from: EMA
                 

Buffer Type: SXP Trace
Buffer Id: 2
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:51.
00:00:00:01:263 EMC: Setting Update lock: 1
00:00:00:01:349 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:382 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:402 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:423 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:443 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:465 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:470 EMC: Failed to get Power Supply revision info.
00:00:00:01:476 EMC: SXP FW Version:   04.05
00:00:00:01:481 EMC: SXP BOOT Version: 03.00
00:00:00:01:485 EMC: SXP ISTR Version: 03.05
00:00:00:01:489 EMC: MC Version:       16.01
00:00:00:01:493 EMC: DLMC Version:     14.47
00:00:00:01:498 EMC: PS Version:       00.01
00:00:00:01:502 EMC: CPLD Version:     00.13
00:00:00:01:506 EMC: Base SAS Address: 50060480_00fa80c0
00:00:00:01:510 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:520 EMC: Exception flag read from register is 1
00:00:00:36:984 EMC: Setting enclosure number to 255
00:00:00:37:003 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:37:046 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:068 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:089 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:109 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:130 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:136 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:160 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:183 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:204 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:225 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:269 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:274 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:298 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:321 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:342 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:363 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:385 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:390 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:397 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:37:404 EMC: Checking for updated FW!
00:00:00:37:408 EMC: Checking for SXP FW download
00:00:00:37:436 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:37:451 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:37:456 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:51:683 WDG EXPIRED: Elapsed time since last WDG run: 792 ms
00:00:00:51:688 WDG: Pong not received from: EMA
                                              

Buffer Type: Expander Ring Buffer Trace
Buffer Id: 255
Source: Manual
SXP Major Rev: 04
SXP Minor Rev: 30
Length: -1
Timestamp: 06/16/2011 07:42:22
        
22:03:09:51.290 EMC: DISPLAY command success, encl number=01, mode=4.
22:03:09:51.297 EMC: ...read processing took 31 ms, status=Success
22:03:09:52.273 Setting CPLD activity LED mode to OR because both sides not being polled.
22:03:09:54.577 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
22:03:09:54.601 EMC: DISPLAY command success, encl number=01, mode=4.
22:03:09:54.900 Setting CPLD activity LED mode to AND because both sides being polled.
23:00:00:00.162 EMC: New Day 23
23:00:00:00.891 EMC: Resynchronizing to Flare time: 1987289250 ms; timestamp adjusted to: 0 ms.
24:00:00:00.249 EMC: New Day 24
24:00:00:03.135 EMC: Resynchronizing to Flare time: 2073691125 ms; timestamp adjusted to: 0 ms.
25:00:00:00.830 EMC: New Day 25
25:00:00:00.984 EMC: Resynchronizing to Flare time: 2160089687 ms; timestamp adjusted to: 0 ms.
26:00:00:00.296 EMC: New Day 26
26:00:00:01.989 EMC: Resynchronizing to Flare time: 2246491562 ms; timestamp adjusted to: 0 ms.
27:00:00:00.144 EMC: New Day 27
27:00:00:00.714 EMC: Resynchronizing to Flare time: 2332890156 ms; timestamp adjusted to: 0 ms.
28:00:00:00.090 EMC: New Day 28
28:00:00:00.194 EMC: Resynchronizing to Flare time: 2419288750 ms; timestamp adjusted to: 0 ms.
29:00:00:00.184 EMC: New Day 29
29:00:00:02.602 EMC: Resynchronizing to Flare time: 2505690625 ms; timestamp adjusted to: 0 ms.
30:00:00:00.224 EMC: New Day 30
30:00:00:01.116 EMC: Resynchronizing to Flare time: 2592089250 ms; timestamp adjusted to: 0 ms.
31:00:00:00.022 EMC: New Day 31
31:00:00:01.870 EMC: Resynchronizing to Flare time: 2678491125 ms; timestamp adjusted to: 0 ms.
31:08:15:42.317 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
31:08:15:42.323 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
31:08:15:42.332 Setting CPLD activity LED mode to OR because both sides not being polled.
31:08:15:42.341 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
31:08:15:42.365 EMC: DISPLAY command success, encl number=01, mode=C.
31:08:15:42.408 EMC: Sending changed local info to peer.
31:08:15:45.594 EMC: Flare polling state restored because good generation number 0x2306 received.
31:08:15:45.602 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
31:08:15:45.610 Setting CPLD activity LED mode to AND because both sides being polled.
31:08:15:45.617 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
31:08:15:45.657 EMC: DISPLAY command success, encl number=01, mode=4.
31:08:15:45.677 EMC: Sending changed local info to peer.
31:08:15:45.692 EMC: Resynchronizing to Flare time: 2708176562 ms; timestamp adjusted to: 0 ms.
31:08:42:31.736 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
31:08:42:31.744 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
31:08:42:31.753 Setting CPLD activity LED mode to OR because both sides not being polled.
31:08:42:31.764 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
31:08:42:31.798 EMC: DISPLAY command success, encl number=01, mode=C.
31:08:42:31.912 EMC: Sending changed local info to peer.
31:08:42:37.788 EMC: Flare polling state restored because good generation number 0x2306 received.
31:08:42:37.797 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
31:08:42:37.804 Setting CPLD activity LED mode to AND because both sides being polled.
31:08:42:37.808 EMC: Sending changed local info to peer.
31:08:42:37.811 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
31:08:42:37.849 EMC: DISPLAY command success, encl number=01, mode=4.
31:08:46:06.123 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
31:08:46:06.149 EMC: DISPLAY command success, encl number=01, mode=4.
31:08:46:06.459 Setting CPLD activity LED mode to OR because both sides not being polled.
31:08:46:10.298 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
31:08:46:10.321 EMC: DISPLAY command success, encl number=01, mode=4.
31:08:46:10.621 Setting CPLD activity LED mode to AND because both sides being polled.
31:08:46:19.170 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
31:08:46:19.193 EMC: DISPLAY command success, encl number=01, mode=4.
31:08:46:19.198 EMC: ...read processing took 29 ms, status=Success
31:08:46:20.181 Setting CPLD activity LED mode to OR because both sides not being polled.
31:08:46:21.167 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
31:08:46:21.193 EMC: DISPLAY command success, encl number=01, mode=4.
31:08:46:21.502 Setting CPLD activity LED mode to AND because both sides being polled.
32:00:00:00.188 EMC: New Day 32
32:00:00:02.387 EMC: Year 2011, Month 6
32:00:00:02.407 EMC: Resynchronizing to Flare time: 86463437 ms; timestamp adjusted to: 0 ms.
02:00:00:00.221 EMC: New Day 2
02:00:00:02.016 EMC: Resynchronizing to Flare time: 172891562 ms; timestamp adjusted to: 0 ms.
02:03:22:07.993 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
02:03:22:08.001 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
02:03:22:08.008 Setting CPLD activity LED mode to OR because both sides not being polled.
02:03:22:08.018 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
02:03:22:08.042 EMC: DISPLAY command success, encl number=01, mode=C.
02:03:22:08.087 EMC: Sending changed local info to peer.
02:03:22:11.273 EMC: Flare polling state restored because good generation number 0x2306 received.
02:03:22:11.282 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
02:03:22:11.290 Setting CPLD activity LED mode to AND because both sides being polled.
02:03:22:11.297 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
02:03:22:11.318 EMC: Sending changed local info to peer.
02:03:22:11.329 EMC: DISPLAY command success, encl number=01, mode=4.
02:03:22:11.369 EMC: Resynchronizing to Flare time: 184943593 ms; timestamp adjusted to: 0 ms.
02:14:42:06.907 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
02:14:42:06.914 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
02:14:42:06.921 Setting CPLD activity LED mode to OR because both sides not being polled.
02:14:42:06.931 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
02:14:42:06.953 EMC: DISPLAY command success, encl number=01, mode=C.
02:14:42:07.001 EMC: Sending changed local info to peer.
02:14:42:07.442 EMC: ...read processing took 0 ms, status=Success
02:14:42:10.185 EMC: Flare polling state restored because good generation number 0x2306 received.
02:14:42:10.194 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
02:14:42:10.201 Setting CPLD activity LED mode to AND because both sides being polled.
02:14:42:10.209 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
02:14:42:10.232 EMC: DISPLAY command success, encl number=01, mode=4.
02:14:42:10.256 EMC: Resynchronizing to Flare time: 225772187 ms; timestamp adjusted to: 0 ms.
02:14:42:52.351 EMC: Sending changed local info to peer.
03:00:00:00.034 EMC: New Day 3
03:00:00:00.337 EMC: Resynchronizing to Flare time: 259234375 ms; timestamp adjusted to: 0 ms.
04:00:00:00.139 EMC: New Day 4
04:00:00:00.883 EMC: Resynchronizing to Flare time: 345688750 ms; timestamp adjusted to: 0 ms.
05:00:00:00.154 EMC: New Day 5
05:00:00:02.050 EMC: Resynchronizing to Flare time: 432090625 ms; timestamp adjusted to: 0 ms.
05:02:42:19.443 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
05:02:42:19.451 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
05:02:42:19.459 Setting CPLD activity LED mode to OR because both sides not being polled.
05:02:42:19.470 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
05:02:42:19.508 EMC: DISPLAY command success, encl number=01, mode=C.
05:02:42:19.607 EMC: Sending changed local info to peer.
05:02:42:24.343 EMC: Flare polling state restored because good generation number 0x2306 received.
05:02:42:24.352 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
05:02:42:24.359 Setting CPLD activity LED mode to AND because both sides being polled.
05:02:42:24.367 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
05:02:42:24.398 EMC: DISPLAY command success, encl number=01, mode=4.
05:02:42:24.419 EMC: Sending changed local info to peer.
05:02:42:24.434 EMC: Resynchronizing to Flare time: 441750875 ms; timestamp adjusted to: 0 ms.
06:00:00:00.291 EMC: New Day 6
06:00:00:03.062 EMC: Resynchronizing to Flare time: 518485937 ms; timestamp adjusted to: 0 ms.
07:00:00:00.132 EMC: New Day 7
07:00:00:00.951 EMC: Resynchronizing to Flare time: 604891093 ms; timestamp adjusted to: 0 ms.
08:00:00:00.127 EMC: New Day 8
08:00:00:00.356 EMC: Resynchronizing to Flare time: 691289687 ms; timestamp adjusted to: 0 ms.
09:00:00:00.076 EMC: New Day 9
09:00:00:03.188 EMC: Resynchronizing to Flare time: 777691562 ms; timestamp adjusted to: 0 ms.
10:00:00:00.173 EMC: New Day 10
10:00:00:02.489 EMC: Resynchronizing to Flare time: 864090156 ms; timestamp adjusted to: 0 ms.
11:00:00:00.087 EMC: New Day 11
11:00:00:03.259 EMC: Resynchronizing to Flare time: 950492062 ms; timestamp adjusted to: 0 ms.
11:19:22:18.506 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
11:19:22:18.519 EMC: DISPLAY command success, encl number=01, mode=4.
11:19:22:18.829 Setting CPLD activity LED mode to OR because both sides not being polled.
11:19:22:21.750 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
11:19:22:21.773 EMC: DISPLAY command success, encl number=01, mode=4.
11:19:22:22.085 Setting CPLD activity LED mode to AND because both sides being polled.
12:00:00:00.701 EMC: New Day 12
12:00:00:01.090 EMC: Resynchronizing to Flare time: 1036890625 ms; timestamp adjusted to: 0 ms.
13:00:00:00.277 EMC: New Day 13
13:00:00:02.626 EMC: Resynchronizing to Flare time: 1123292500 ms; timestamp adjusted to: 0 ms.
14:00:00:00.035 EMC: New Day 14
14:00:00:02.186 EMC: Resynchronizing to Flare time: 1209691093 ms; timestamp adjusted to: 0 ms.
14:10:58:03.867 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
14:10:58:03.879 EMC: DISPLAY command success, encl number=01, mode=4.
14:10:58:04.187 Setting CPLD activity LED mode to OR because both sides not being polled.
14:10:58:07.443 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
14:10:58:07.467 EMC: DISPLAY command success, encl number=01, mode=4.
14:10:58:07.765 Setting CPLD activity LED mode to AND because both sides being polled.
15:00:00:00.073 EMC: New Day 15
15:00:00:01.411 EMC: Resynchronizing to Flare time: 1296089687 ms; timestamp adjusted to: 0 ms.
15:09:32:30.571 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
15:09:32:30.578 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
15:09:32:30.585 Setting CPLD activity LED mode to OR because both sides not being polled.
15:09:32:30.595 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
15:09:32:30.617 EMC: DISPLAY command success, encl number=01, mode=C.
15:09:32:30.663 EMC: Sending changed local info to peer.
15:09:32:33.847 EMC: Flare polling state restored because good generation number 0x2306 received.
15:09:32:33.856 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
15:09:32:33.863 Setting CPLD activity LED mode to AND because both sides being polled.
15:09:32:33.871 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
15:09:32:33.899 EMC: Sending changed local info to peer.
15:09:32:33.909 EMC: DISPLAY command success, encl number=01, mode=4.
15:09:32:33.952 EMC: Resynchronizing to Flare time: 1330388593 ms; timestamp adjusted to: 0 ms.
16:00:00:00.260 EMC: New Day 16
16:00:00:02.288 EMC: Resynchronizing to Flare time: 1382455468 ms; timestamp adjusted to: 0 ms.
                                                                                                                                                                 

Buffer Type: SXP Trace
Buffer Id: 0
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 49th at 17:03:03.
00:00:00:01:265 EMC: Setting Update lock: 1
00:00:00:01:399 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:420 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:440 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:460 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:482 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:502 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:507 EMC: Failed to get Power Supply revision info.
00:00:00:01:514 EMC: SXP FW Version:   04.05
00:00:00:01:518 EMC: SXP BOOT Version: 03.00
00:00:00:01:522 EMC: SXP ISTR Version: 03.05
00:00:00:01:526 EMC: MC Version:       16.01
00:00:00:01:531 EMC: DLMC Version:     14.47
00:00:00:01:535 EMC: PS Version:       00.01
00:00:00:01:539 EMC: CPLD Version:     00.09
00:00:00:01:543 EMC: Base SAS Address: 50060480_00b680c0
00:00:00:01:548 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:557 EMC: Exception flag read from register is 0
00:00:00:00:985 EMC: Setting enclosure number to 255
00:00:00:01:005 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:01:026 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:049 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:069 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:090 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:112 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:119 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:142 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:165 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:185 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:239 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:259 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:265 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:287 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:308 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:330 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:350 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:370 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:375 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:383 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:01:389 EMC: Checking for updated FW!
00:00:00:01:393 EMC: Checking for SXP FW download
00:00:00:01:420 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:01:435 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:01:440 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:15:669 WDG EXPIRED: Elapsed time since last WDG run: 799 ms
00:00:00:15:674 WDG: Pong not received from: EMA
                                              

Buffer Type: SXP Trace
Buffer Id: 1
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 946
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:15.7
00:00:00:01:264 EMC: Setting Update lock: 1
00:00:00:01:350 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:384 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:404 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:424 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:445 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:467 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:472 EMC: Failed to get Power Supply revision info.
00:00:00:01:478 EMC: SXP FW Version:   04.05
00:00:00:01:483 EMC: SXP BOOT Version: 03.00
00:00:00:01:487 EMC: SXP ISTR Version: 03.05
00:00:00:01:491 EMC: MC Version:       16.01
00:00:00:01:497 EMC: DLMC Version:     14.47
00:00:00:01:501 EMC: PS Version:       00.01
00:00:00:01:505 EMC: CPLD Version:     00.13
00:00:00:15:768 WDG EXPIRED: Elapsed time since last WDG run: 229 ms
00:00:00:15:773 WDG: Pong not received from: EMA
                 

Buffer Type: SXP Trace
Buffer Id: 2
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:51.
00:00:00:01:263 EMC: Setting Update lock: 1
00:00:00:01:349 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:382 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:402 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:423 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:443 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:465 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:470 EMC: Failed to get Power Supply revision info.
00:00:00:01:476 EMC: SXP FW Version:   04.05
00:00:00:01:481 EMC: SXP BOOT Version: 03.00
00:00:00:01:485 EMC: SXP ISTR Version: 03.05
00:00:00:01:489 EMC: MC Version:       16.01
00:00:00:01:493 EMC: DLMC Version:     14.47
00:00:00:01:498 EMC: PS Version:       00.01
00:00:00:01:502 EMC: CPLD Version:     00.13
00:00:00:01:506 EMC: Base SAS Address: 50060480_00fa80c0
00:00:00:01:510 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:520 EMC: Exception flag read from register is 1
00:00:00:36:984 EMC: Setting enclosure number to 255
00:00:00:37:003 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:37:046 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:068 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:089 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:109 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:130 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:136 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:160 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:183 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:204 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:225 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:269 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:274 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:298 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:321 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:342 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:363 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:385 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:390 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:397 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:37:404 EMC: Checking for updated FW!
00:00:00:37:408 EMC: Checking for SXP FW download
00:00:00:37:436 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:37:451 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:37:456 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:51:683 WDG EXPIRED: Elapsed time since last WDG run: 792 ms
00:00:00:51:688 WDG: Pong not received from: EMA
                                              

Buffer Type: Expander Ring Buffer Trace
Buffer Id: 255
Source: Manual
SXP Major Rev: 04
SXP Minor Rev: 30
Length: -1
Timestamp: 06/20/2011 11:42:21
        
31:08:42:37.808 EMC: Sending changed local info to peer.
31:08:42:37.811 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
31:08:42:37.849 EMC: DISPLAY command success, encl number=01, mode=4.
31:08:46:06.123 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
31:08:46:06.149 EMC: DISPLAY command success, encl number=01, mode=4.
31:08:46:06.459 Setting CPLD activity LED mode to OR because both sides not being polled.
31:08:46:10.298 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
31:08:46:10.321 EMC: DISPLAY command success, encl number=01, mode=4.
31:08:46:10.621 Setting CPLD activity LED mode to AND because both sides being polled.
31:08:46:19.170 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
31:08:46:19.193 EMC: DISPLAY command success, encl number=01, mode=4.
31:08:46:19.198 EMC: ...read processing took 29 ms, status=Success
31:08:46:20.181 Setting CPLD activity LED mode to OR because both sides not being polled.
31:08:46:21.167 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
31:08:46:21.193 EMC: DISPLAY command success, encl number=01, mode=4.
31:08:46:21.502 Setting CPLD activity LED mode to AND because both sides being polled.
32:00:00:00.188 EMC: New Day 32
32:00:00:02.387 EMC: Year 2011, Month 6
32:00:00:02.407 EMC: Resynchronizing to Flare time: 86463437 ms; timestamp adjusted to: 0 ms.
02:00:00:00.221 EMC: New Day 2
02:00:00:02.016 EMC: Resynchronizing to Flare time: 172891562 ms; timestamp adjusted to: 0 ms.
02:03:22:07.993 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
02:03:22:08.001 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
02:03:22:08.008 Setting CPLD activity LED mode to OR because both sides not being polled.
02:03:22:08.018 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
02:03:22:08.042 EMC: DISPLAY command success, encl number=01, mode=C.
02:03:22:08.087 EMC: Sending changed local info to peer.
02:03:22:11.273 EMC: Flare polling state restored because good generation number 0x2306 received.
02:03:22:11.282 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
02:03:22:11.290 Setting CPLD activity LED mode to AND because both sides being polled.
02:03:22:11.297 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
02:03:22:11.318 EMC: Sending changed local info to peer.
02:03:22:11.329 EMC: DISPLAY command success, encl number=01, mode=4.
02:03:22:11.369 EMC: Resynchronizing to Flare time: 184943593 ms; timestamp adjusted to: 0 ms.
02:14:42:06.907 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
02:14:42:06.914 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
02:14:42:06.921 Setting CPLD activity LED mode to OR because both sides not being polled.
02:14:42:06.931 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
02:14:42:06.953 EMC: DISPLAY command success, encl number=01, mode=C.
02:14:42:07.001 EMC: Sending changed local info to peer.
02:14:42:07.442 EMC: ...read processing took 0 ms, status=Success
02:14:42:10.185 EMC: Flare polling state restored because good generation number 0x2306 received.
02:14:42:10.194 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
02:14:42:10.201 Setting CPLD activity LED mode to AND because both sides being polled.
02:14:42:10.209 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
02:14:42:10.232 EMC: DISPLAY command success, encl number=01, mode=4.
02:14:42:10.256 EMC: Resynchronizing to Flare time: 225772187 ms; timestamp adjusted to: 0 ms.
02:14:42:52.351 EMC: Sending changed local info to peer.
03:00:00:00.034 EMC: New Day 3
03:00:00:00.337 EMC: Resynchronizing to Flare time: 259234375 ms; timestamp adjusted to: 0 ms.
04:00:00:00.139 EMC: New Day 4
04:00:00:00.883 EMC: Resynchronizing to Flare time: 345688750 ms; timestamp adjusted to: 0 ms.
05:00:00:00.154 EMC: New Day 5
05:00:00:02.050 EMC: Resynchronizing to Flare time: 432090625 ms; timestamp adjusted to: 0 ms.
05:02:42:19.443 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
05:02:42:19.451 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
05:02:42:19.459 Setting CPLD activity LED mode to OR because both sides not being polled.
05:02:42:19.470 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
05:02:42:19.508 EMC: DISPLAY command success, encl number=01, mode=C.
05:02:42:19.607 EMC: Sending changed local info to peer.
05:02:42:24.343 EMC: Flare polling state restored because good generation number 0x2306 received.
05:02:42:24.352 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
05:02:42:24.359 Setting CPLD activity LED mode to AND because both sides being polled.
05:02:42:24.367 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
05:02:42:24.398 EMC: DISPLAY command success, encl number=01, mode=4.
05:02:42:24.419 EMC: Sending changed local info to peer.
05:02:42:24.434 EMC: Resynchronizing to Flare time: 441750875 ms; timestamp adjusted to: 0 ms.
06:00:00:00.291 EMC: New Day 6
06:00:00:03.062 EMC: Resynchronizing to Flare time: 518485937 ms; timestamp adjusted to: 0 ms.
07:00:00:00.132 EMC: New Day 7
07:00:00:00.951 EMC: Resynchronizing to Flare time: 604891093 ms; timestamp adjusted to: 0 ms.
08:00:00:00.127 EMC: New Day 8
08:00:00:00.356 EMC: Resynchronizing to Flare time: 691289687 ms; timestamp adjusted to: 0 ms.
09:00:00:00.076 EMC: New Day 9
09:00:00:03.188 EMC: Resynchronizing to Flare time: 777691562 ms; timestamp adjusted to: 0 ms.
10:00:00:00.173 EMC: New Day 10
10:00:00:02.489 EMC: Resynchronizing to Flare time: 864090156 ms; timestamp adjusted to: 0 ms.
11:00:00:00.087 EMC: New Day 11
11:00:00:03.259 EMC: Resynchronizing to Flare time: 950492062 ms; timestamp adjusted to: 0 ms.
11:19:22:18.506 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
11:19:22:18.519 EMC: DISPLAY command success, encl number=01, mode=4.
11:19:22:18.829 Setting CPLD activity LED mode to OR because both sides not being polled.
11:19:22:21.750 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
11:19:22:21.773 EMC: DISPLAY command success, encl number=01, mode=4.
11:19:22:22.085 Setting CPLD activity LED mode to AND because both sides being polled.
12:00:00:00.701 EMC: New Day 12
12:00:00:01.090 EMC: Resynchronizing to Flare time: 1036890625 ms; timestamp adjusted to: 0 ms.
13:00:00:00.277 EMC: New Day 13
13:00:00:02.626 EMC: Resynchronizing to Flare time: 1123292500 ms; timestamp adjusted to: 0 ms.
14:00:00:00.035 EMC: New Day 14
14:00:00:02.186 EMC: Resynchronizing to Flare time: 1209691093 ms; timestamp adjusted to: 0 ms.
14:10:58:03.867 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
14:10:58:03.879 EMC: DISPLAY command success, encl number=01, mode=4.
14:10:58:04.187 Setting CPLD activity LED mode to OR because both sides not being polled.
14:10:58:07.443 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
14:10:58:07.467 EMC: DISPLAY command success, encl number=01, mode=4.
14:10:58:07.765 Setting CPLD activity LED mode to AND because both sides being polled.
15:00:00:00.073 EMC: New Day 15
15:00:00:01.411 EMC: Resynchronizing to Flare time: 1296089687 ms; timestamp adjusted to: 0 ms.
15:09:32:30.571 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
15:09:32:30.578 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
15:09:32:30.585 Setting CPLD activity LED mode to OR because both sides not being polled.
15:09:32:30.595 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
15:09:32:30.617 EMC: DISPLAY command success, encl number=01, mode=C.
15:09:32:30.663 EMC: Sending changed local info to peer.
15:09:32:33.847 EMC: Flare polling state restored because good generation number 0x2306 received.
15:09:32:33.856 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
15:09:32:33.863 Setting CPLD activity LED mode to AND because both sides being polled.
15:09:32:33.871 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
15:09:32:33.899 EMC: Sending changed local info to peer.
15:09:32:33.909 EMC: DISPLAY command success, encl number=01, mode=4.
15:09:32:33.952 EMC: Resynchronizing to Flare time: 1330388593 ms; timestamp adjusted to: 0 ms.
16:00:00:00.260 EMC: New Day 16
16:00:00:02.288 EMC: Resynchronizing to Flare time: 1382455468 ms; timestamp adjusted to: 0 ms.
16:07:41:59.469 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
16:07:41:59.477 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
16:07:41:59.486 Setting CPLD activity LED mode to OR because both sides not being polled.
16:07:41:59.495 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
16:07:41:59.533 EMC: DISPLAY command success, encl number=01, mode=C.
16:07:41:59.633 EMC: Sending changed local info to peer.
16:07:42:00.395 EMC: ...read processing took 0 ms, status=Success
16:07:42:03.995 EMC: Flare polling state restored because good generation number 0x2306 received.
16:07:42:04.004 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
16:07:42:04.011 Setting CPLD activity LED mode to AND because both sides being polled.
16:07:42:04.019 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
16:07:42:04.042 EMC: DISPLAY command success, encl number=01, mode=4.
16:07:42:04.066 EMC: Resynchronizing to Flare time: 1410148593 ms; timestamp adjusted to: 0 ms.
16:07:42:28.844 EMC: Sending changed local info to peer.
16:07:42:33.915 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
16:07:42:33.923 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
16:07:42:33.931 Setting CPLD activity LED mode to OR because both sides not being polled.
16:07:42:33.942 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
16:07:42:33.976 EMC: DISPLAY command success, encl number=01, mode=C.
16:07:42:34.088 EMC: Sending changed local info to peer.
16:07:42:36.274 EMC: Flare polling state restored because good generation number 0x2306 received.
16:07:42:36.282 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
16:07:42:36.291 Setting CPLD activity LED mode to AND because both sides being polled.
16:07:42:36.298 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
16:07:42:36.322 EMC: DISPLAY command success, encl number=01, mode=4.
16:07:42:40.807 EMC: Sending changed local info to peer.
16:23:31:45.296 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
16:23:31:45.303 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
16:23:31:45.310 Setting CPLD activity LED mode to OR because both sides not being polled.
16:23:31:45.320 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
16:23:31:45.342 EMC: DISPLAY command success, encl number=01, mode=C.
16:23:31:45.389 EMC: Sending changed local info to peer.
16:23:31:48.573 EMC: Flare polling state restored because good generation number 0x2306 received.
16:23:31:48.582 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
16:23:31:48.589 Setting CPLD activity LED mode to AND because both sides being polled.
16:23:31:48.598 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
16:23:31:48.621 EMC: Sending changed local info to peer.
16:23:31:48.632 EMC: DISPLAY command success, encl number=01, mode=4.
16:23:31:48.673 EMC: Resynchronizing to Flare time: 1467167500 ms; timestamp adjusted to: 0 ms.
17:00:00:00.257 EMC: New Day 17
18:00:00:00.183 EMC: New Day 18
18:00:00:01.991 EMC: Resynchronizing to Flare time: 1555292031 ms; timestamp adjusted to: 0 ms.
19:00:00:00.133 EMC: New Day 19
19:00:00:01.178 EMC: Resynchronizing to Flare time: 1641690625 ms; timestamp adjusted to: 0 ms.
20:00:00:00.184 EMC: New Day 20
20:00:00:00.619 EMC: Resynchronizing to Flare time: 1728089265 ms; timestamp adjusted to: 0 ms.
20:11:41:44.364 EMC: Sending changed local info to peer.
                                                                                                                                                                  

Buffer Type: SXP Trace
Buffer Id: 0
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 49th at 17:03:03.
00:00:00:01:265 EMC: Setting Update lock: 1
00:00:00:01:399 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:420 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:440 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:460 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:482 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:502 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:507 EMC: Failed to get Power Supply revision info.
00:00:00:01:514 EMC: SXP FW Version:   04.05
00:00:00:01:518 EMC: SXP BOOT Version: 03.00
00:00:00:01:522 EMC: SXP ISTR Version: 03.05
00:00:00:01:526 EMC: MC Version:       16.01
00:00:00:01:531 EMC: DLMC Version:     14.47
00:00:00:01:535 EMC: PS Version:       00.01
00:00:00:01:539 EMC: CPLD Version:     00.09
00:00:00:01:543 EMC: Base SAS Address: 50060480_00b680c0
00:00:00:01:548 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:557 EMC: Exception flag read from register is 0
00:00:00:00:985 EMC: Setting enclosure number to 255
00:00:00:01:005 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:01:026 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:049 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:069 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:090 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:112 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:119 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:142 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:165 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:185 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:239 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:259 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:265 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:287 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:308 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:330 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:350 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:370 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:375 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:383 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:01:389 EMC: Checking for updated FW!
00:00:00:01:393 EMC: Checking for SXP FW download
00:00:00:01:420 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:01:435 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:01:440 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:15:669 WDG EXPIRED: Elapsed time since last WDG run: 799 ms
00:00:00:15:674 WDG: Pong not received from: EMA
                                              

Buffer Type: SXP Trace
Buffer Id: 1
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 946
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:15.7
00:00:00:01:264 EMC: Setting Update lock: 1
00:00:00:01:350 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:384 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:404 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:424 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:445 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:467 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:472 EMC: Failed to get Power Supply revision info.
00:00:00:01:478 EMC: SXP FW Version:   04.05
00:00:00:01:483 EMC: SXP BOOT Version: 03.00
00:00:00:01:487 EMC: SXP ISTR Version: 03.05
00:00:00:01:491 EMC: MC Version:       16.01
00:00:00:01:497 EMC: DLMC Version:     14.47
00:00:00:01:501 EMC: PS Version:       00.01
00:00:00:01:505 EMC: CPLD Version:     00.13
00:00:00:15:768 WDG EXPIRED: Elapsed time since last WDG run: 229 ms
00:00:00:15:773 WDG: Pong not received from: EMA
                 

Buffer Type: SXP Trace
Buffer Id: 2
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:51.
00:00:00:01:263 EMC: Setting Update lock: 1
00:00:00:01:349 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:382 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:402 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:423 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:443 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:465 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:470 EMC: Failed to get Power Supply revision info.
00:00:00:01:476 EMC: SXP FW Version:   04.05
00:00:00:01:481 EMC: SXP BOOT Version: 03.00
00:00:00:01:485 EMC: SXP ISTR Version: 03.05
00:00:00:01:489 EMC: MC Version:       16.01
00:00:00:01:493 EMC: DLMC Version:     14.47
00:00:00:01:498 EMC: PS Version:       00.01
00:00:00:01:502 EMC: CPLD Version:     00.13
00:00:00:01:506 EMC: Base SAS Address: 50060480_00fa80c0
00:00:00:01:510 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:520 EMC: Exception flag read from register is 1
00:00:00:36:984 EMC: Setting enclosure number to 255
00:00:00:37:003 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:37:046 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:068 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:089 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:109 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:130 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:136 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:160 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:183 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:204 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:225 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:269 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:274 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:298 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:321 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:342 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:363 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:385 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:390 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:397 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:37:404 EMC: Checking for updated FW!
00:00:00:37:408 EMC: Checking for SXP FW download
00:00:00:37:436 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:37:451 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:37:456 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:51:683 WDG EXPIRED: Elapsed time since last WDG run: 792 ms
00:00:00:51:688 WDG: Pong not received from: EMA
                                              

Buffer Type: Expander Ring Buffer Trace
Buffer Id: 255
Source: Manual
SXP Major Rev: 04
SXP Minor Rev: 30
Length: -1
Timestamp: 07/01/2011 09:42:22
        
16:07:41:59.495 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
16:07:41:59.533 EMC: DISPLAY command success, encl number=01, mode=C.
16:07:41:59.633 EMC: Sending changed local info to peer.
16:07:42:00.395 EMC: ...read processing took 0 ms, status=Success
16:07:42:03.995 EMC: Flare polling state restored because good generation number 0x2306 received.
16:07:42:04.004 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
16:07:42:04.011 Setting CPLD activity LED mode to AND because both sides being polled.
16:07:42:04.019 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
16:07:42:04.042 EMC: DISPLAY command success, encl number=01, mode=4.
16:07:42:04.066 EMC: Resynchronizing to Flare time: 1410148593 ms; timestamp adjusted to: 0 ms.
16:07:42:28.844 EMC: Sending changed local info to peer.
16:07:42:33.915 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
16:07:42:33.923 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
16:07:42:33.931 Setting CPLD activity LED mode to OR because both sides not being polled.
16:07:42:33.942 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
16:07:42:33.976 EMC: DISPLAY command success, encl number=01, mode=C.
16:07:42:34.088 EMC: Sending changed local info to peer.
16:07:42:36.274 EMC: Flare polling state restored because good generation number 0x2306 received.
16:07:42:36.282 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
16:07:42:36.291 Setting CPLD activity LED mode to AND because both sides being polled.
16:07:42:36.298 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
16:07:42:36.322 EMC: DISPLAY command success, encl number=01, mode=4.
16:07:42:40.807 EMC: Sending changed local info to peer.
16:23:31:45.296 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
16:23:31:45.303 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
16:23:31:45.310 Setting CPLD activity LED mode to OR because both sides not being polled.
16:23:31:45.320 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
16:23:31:45.342 EMC: DISPLAY command success, encl number=01, mode=C.
16:23:31:45.389 EMC: Sending changed local info to peer.
16:23:31:48.573 EMC: Flare polling state restored because good generation number 0x2306 received.
16:23:31:48.582 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
16:23:31:48.589 Setting CPLD activity LED mode to AND because both sides being polled.
16:23:31:48.598 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
16:23:31:48.621 EMC: Sending changed local info to peer.
16:23:31:48.632 EMC: DISPLAY command success, encl number=01, mode=4.
16:23:31:48.673 EMC: Resynchronizing to Flare time: 1467167500 ms; timestamp adjusted to: 0 ms.
17:00:00:00.257 EMC: New Day 17
18:00:00:00.183 EMC: New Day 18
18:00:00:01.991 EMC: Resynchronizing to Flare time: 1555292031 ms; timestamp adjusted to: 0 ms.
19:00:00:00.133 EMC: New Day 19
19:00:00:01.178 EMC: Resynchronizing to Flare time: 1641690625 ms; timestamp adjusted to: 0 ms.
20:00:00:00.184 EMC: New Day 20
20:00:00:00.619 EMC: Resynchronizing to Flare time: 1728089265 ms; timestamp adjusted to: 0 ms.
20:11:41:44.191 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
20:11:41:44.199 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
20:11:41:44.207 Setting CPLD activity LED mode to OR because both sides not being polled.
20:11:41:44.218 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
20:11:41:44.252 EMC: DISPLAY command success, encl number=01, mode=C.
20:11:41:44.364 EMC: Sending changed local info to peer.
20:11:41:51.887 EMC: Flare polling state restored because good generation number 0x2306 received.
20:11:41:51.896 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
20:11:41:51.903 Setting CPLD activity LED mode to AND because both sides being polled.
20:11:41:51.911 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
20:11:41:51.934 EMC: DISPLAY command success, encl number=01, mode=4.
20:11:41:51.959 EMC: Resynchronizing to Flare time: 1770151250 ms; timestamp adjusted to: 0 ms.
20:11:42:31.521 EMC: Sending changed local info to peer.
21:00:00:00.229 EMC: New Day 21
21:00:00:03.239 EMC: Resynchronizing to Flare time: 1814451718 ms; timestamp adjusted to: 0 ms.
21:06:53:56.515 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
21:06:53:56.538 EMC: DISPLAY command success, encl number=01, mode=4.
21:06:53:56.846 Setting CPLD activity LED mode to OR because both sides not being polled.
21:06:53:59.833 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
21:06:53:59.846 EMC: DISPLAY command success, encl number=01, mode=4.
21:06:53:59.851 EMC: ...read processing took 19 ms, status=Success
21:06:54:00.836 Setting CPLD activity LED mode to AND because both sides being polled.
22:00:00:00.172 EMC: New Day 22
22:00:00:01.828 EMC: Resynchronizing to Flare time: 1900889687 ms; timestamp adjusted to: 0 ms.
23:00:00:00.257 EMC: New Day 23
23:00:00:02.705 EMC: Resynchronizing to Flare time: 1987291562 ms; timestamp adjusted to: 0 ms.
24:00:00:00.113 EMC: New Day 24
24:00:00:00.701 EMC: Resynchronizing to Flare time: 2073690156 ms; timestamp adjusted to: 0 ms.
25:00:00:00.047 EMC: New Day 25
25:00:00:02.451 EMC: Resynchronizing to Flare time: 2160092031 ms; timestamp adjusted to: 0 ms.
26:00:00:00.173 EMC: New Day 26
26:00:00:01.743 EMC: Resynchronizing to Flare time: 2246490625 ms; timestamp adjusted to: 0 ms.
26:04:36:34.845 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
26:04:36:34.852 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
26:04:36:34.859 Setting CPLD activity LED mode to OR because both sides not being polled.
26:04:36:34.868 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
26:04:36:34.891 EMC: DISPLAY command success, encl number=01, mode=C.
26:04:36:34.936 EMC: Sending changed local info to peer.
26:04:36:38.123 EMC: Flare polling state restored because good generation number 0x2306 received.
26:04:36:38.132 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
26:04:36:38.139 Setting CPLD activity LED mode to AND because both sides being polled.
26:04:36:38.146 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
26:04:36:38.178 EMC: DISPLAY command success, encl number=01, mode=4.
26:04:36:38.217 EMC: Resynchronizing to Flare time: 2263015000 ms; timestamp adjusted to: 0 ms.
26:04:36:55.322 EMC: Sending changed local info to peer.
26:20:02:23.592 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
26:20:02:23.615 EMC: DISPLAY command success, encl number=01, mode=4.
26:20:02:23.922 Setting CPLD activity LED mode to OR because both sides not being polled.
26:20:02:27.190 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
26:20:02:27.213 EMC: DISPLAY command success, encl number=01, mode=4.
26:20:02:27.521 Setting CPLD activity LED mode to AND because both sides being polled.
27:00:00:00.295 EMC: New Day 27
27:00:00:01.661 EMC: Resynchronizing to Flare time: 2332872812 ms; timestamp adjusted to: 0 ms.
28:00:00:00.178 EMC: New Day 28
28:00:00:02.653 EMC: Resynchronizing to Flare time: 2419291125 ms; timestamp adjusted to: 0 ms.
28:06:21:05.800 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
28:06:21:05.807 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
28:06:21:05.814 Setting CPLD activity LED mode to OR because both sides not being polled.
28:06:21:05.823 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
28:06:21:05.846 EMC: DISPLAY command success, encl number=01, mode=C.
28:06:21:05.880 EMC: Sending changed local info to peer.
28:06:21:09.074 EMC: Flare polling state restored because good generation number 0x2306 received.
28:06:21:09.083 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
28:06:21:09.090 Setting CPLD activity LED mode to AND because both sides being polled.
28:06:21:09.097 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
28:06:21:09.124 EMC: DISPLAY command success, encl number=01, mode=4.
28:06:21:09.135 EMC: Sending changed local info to peer.
28:06:21:09.150 EMC: Resynchronizing to Flare time: 2442092500 ms; timestamp adjusted to: 0 ms.
28:06:21:32.959 EMC: ...read processing took 0 ms, status=Success
28:06:21:43.814 EMC: ...read processing took 0 ms, status=Success
28:06:21:55.494 EMC: ...read processing took 0 ms, status=Success
29:00:00:00.145 EMC: New Day 29
29:00:00:01.016 EMC: Resynchronizing to Flare time: 2505666718 ms; timestamp adjusted to: 0 ms.
29:13:52:06.088 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
29:13:52:06.095 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
29:13:52:06.101 Setting CPLD activity LED mode to OR because both sides not being polled.
29:13:52:06.111 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
29:13:52:06.134 EMC: DISPLAY command success, encl number=01, mode=C.
29:13:52:06.168 EMC: Sending changed local info to peer.
29:13:52:09.334 EMC: Flare polling state restored because good generation number 0x2306 received.
29:13:52:09.342 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
29:13:52:09.349 Setting CPLD activity LED mode to AND because both sides being polled.
29:13:52:09.357 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
29:13:52:09.380 EMC: Sending changed local info to peer.
29:13:52:09.391 EMC: DISPLAY command success, encl number=01, mode=4.
29:13:52:09.431 EMC: Resynchronizing to Flare time: 2555581093 ms; timestamp adjusted to: 0 ms.
30:00:00:00.206 EMC: New Day 30
30:00:00:01.031 EMC: Resynchronizing to Flare time: 2592039062 ms; timestamp adjusted to: 0 ms.
31:00:00:00.287 EMC: New Day 31
31:00:00:01.020 EMC: Year 2011, Month 7
31:00:00:01.045 EMC: Resynchronizing to Flare time: 86490156 ms; timestamp adjusted to: 0 ms.
01:05:34:17.008 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
01:05:34:17.031 EMC: DISPLAY command success, encl number=01, mode=4.
01:05:34:17.337 Setting CPLD activity LED mode to OR because both sides not being polled.
01:05:34:20.233 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
01:05:34:20.256 EMC: DISPLAY command success, encl number=01, mode=4.
01:05:34:20.562 Setting CPLD activity LED mode to AND because both sides being polled.
01:05:34:25.393 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
01:05:34:25.416 EMC: DISPLAY command success, encl number=01, mode=4.
01:05:34:25.722 Setting CPLD activity LED mode to OR because both sides not being polled.
01:05:34:27.648 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
01:05:34:27.671 EMC: DISPLAY command success, encl number=01, mode=4.
01:05:34:27.977 Setting CPLD activity LED mode to AND because both sides being polled.
01:05:45:54.911 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
01:05:45:54.934 EMC: DISPLAY command success, encl number=01, mode=4.
01:05:45:54.940 EMC: ...read processing took 30 ms, status=Success
01:05:45:55.917 Setting CPLD activity LED mode to OR because both sides not being polled.
01:05:45:58.489 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
01:05:45:58.511 EMC: DISPLAY command success, encl number=01, mode=4.
01:05:45:58.817 Setting CPLD activity LED mode to AND because both sides being polled.
01:05:46:03.064 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
01:05:46:03.090 EMC: DISPLAY command success, encl number=01, mode=4.
01:05:46:03.400 Setting CPLD activity LED mode to OR because both sides not being polled.
01:05:46:06.913 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
01:05:46:06.936 EMC: DISPLAY command success, encl number=01, mode=4.
01:05:46:06.941 EMC: ...read processing took 29 ms, status=Success
01:05:46:08.482 Setting CPLD activity LED mode to AND because both sides being polled.
                                                                                                                                                                 

Buffer Type: SXP Trace
Buffer Id: 0
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 49th at 17:03:03.
00:00:00:01:265 EMC: Setting Update lock: 1
00:00:00:01:399 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:420 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:440 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:460 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:482 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:502 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:507 EMC: Failed to get Power Supply revision info.
00:00:00:01:514 EMC: SXP FW Version:   04.05
00:00:00:01:518 EMC: SXP BOOT Version: 03.00
00:00:00:01:522 EMC: SXP ISTR Version: 03.05
00:00:00:01:526 EMC: MC Version:       16.01
00:00:00:01:531 EMC: DLMC Version:     14.47
00:00:00:01:535 EMC: PS Version:       00.01
00:00:00:01:539 EMC: CPLD Version:     00.09
00:00:00:01:543 EMC: Base SAS Address: 50060480_00b680c0
00:00:00:01:548 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:557 EMC: Exception flag read from register is 0
00:00:00:00:985 EMC: Setting enclosure number to 255
00:00:00:01:005 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:01:026 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:049 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:069 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:090 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:112 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:119 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:142 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:165 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:185 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:239 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:259 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:265 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:287 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:308 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:330 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:350 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:370 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:375 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:383 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:01:389 EMC: Checking for updated FW!
00:00:00:01:393 EMC: Checking for SXP FW download
00:00:00:01:420 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:01:435 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:01:440 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:15:669 WDG EXPIRED: Elapsed time since last WDG run: 799 ms
00:00:00:15:674 WDG: Pong not received from: EMA
                                              

Buffer Type: SXP Trace
Buffer Id: 1
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 946
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:15.7
00:00:00:01:264 EMC: Setting Update lock: 1
00:00:00:01:350 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:384 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:404 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:424 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:445 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:467 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:472 EMC: Failed to get Power Supply revision info.
00:00:00:01:478 EMC: SXP FW Version:   04.05
00:00:00:01:483 EMC: SXP BOOT Version: 03.00
00:00:00:01:487 EMC: SXP ISTR Version: 03.05
00:00:00:01:491 EMC: MC Version:       16.01
00:00:00:01:497 EMC: DLMC Version:     14.47
00:00:00:01:501 EMC: PS Version:       00.01
00:00:00:01:505 EMC: CPLD Version:     00.13
00:00:00:15:768 WDG EXPIRED: Elapsed time since last WDG run: 229 ms
00:00:00:15:773 WDG: Pong not received from: EMA
                 

Buffer Type: SXP Trace
Buffer Id: 2
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:51.
00:00:00:01:263 EMC: Setting Update lock: 1
00:00:00:01:349 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:382 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:402 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:423 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:443 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:465 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:470 EMC: Failed to get Power Supply revision info.
00:00:00:01:476 EMC: SXP FW Version:   04.05
00:00:00:01:481 EMC: SXP BOOT Version: 03.00
00:00:00:01:485 EMC: SXP ISTR Version: 03.05
00:00:00:01:489 EMC: MC Version:       16.01
00:00:00:01:493 EMC: DLMC Version:     14.47
00:00:00:01:498 EMC: PS Version:       00.01
00:00:00:01:502 EMC: CPLD Version:     00.13
00:00:00:01:506 EMC: Base SAS Address: 50060480_00fa80c0
00:00:00:01:510 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:520 EMC: Exception flag read from register is 1
00:00:00:36:984 EMC: Setting enclosure number to 255
00:00:00:37:003 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:37:046 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:068 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:089 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:109 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:130 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:136 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:160 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:183 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:204 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:225 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:269 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:274 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:298 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:321 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:342 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:363 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:385 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:390 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:397 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:37:404 EMC: Checking for updated FW!
00:00:00:37:408 EMC: Checking for SXP FW download
00:00:00:37:436 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:37:451 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:37:456 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:51:683 WDG EXPIRED: Elapsed time since last WDG run: 792 ms
00:00:00:51:688 WDG: Pong not received from: EMA
                                              

Buffer Type: Expander Ring Buffer Trace
Buffer Id: 255
Source: Manual
SXP Major Rev: 04
SXP Minor Rev: 30
Length: -1
Timestamp: 07/04/2011 13:42:27
        
16:07:42:36.282 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
16:07:42:36.291 Setting CPLD activity LED mode to AND because both sides being polled.
16:07:42:36.298 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
16:07:42:36.322 EMC: DISPLAY command success, encl number=01, mode=4.
16:07:42:40.807 EMC: Sending changed local info to peer.
16:23:31:45.296 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
16:23:31:45.303 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
16:23:31:45.310 Setting CPLD activity LED mode to OR because both sides not being polled.
16:23:31:45.320 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
16:23:31:45.342 EMC: DISPLAY command success, encl number=01, mode=C.
16:23:31:45.389 EMC: Sending changed local info to peer.
16:23:31:48.573 EMC: Flare polling state restored because good generation number 0x2306 received.
16:23:31:48.582 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
16:23:31:48.589 Setting CPLD activity LED mode to AND because both sides being polled.
16:23:31:48.598 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
16:23:31:48.621 EMC: Sending changed local info to peer.
16:23:31:48.632 EMC: DISPLAY command success, encl number=01, mode=4.
16:23:31:48.673 EMC: Resynchronizing to Flare time: 1467167500 ms; timestamp adjusted to: 0 ms.
17:00:00:00.257 EMC: New Day 17
18:00:00:00.183 EMC: New Day 18
18:00:00:01.991 EMC: Resynchronizing to Flare time: 1555292031 ms; timestamp adjusted to: 0 ms.
19:00:00:00.133 EMC: New Day 19
19:00:00:01.178 EMC: Resynchronizing to Flare time: 1641690625 ms; timestamp adjusted to: 0 ms.
20:00:00:00.184 EMC: New Day 20
20:00:00:00.619 EMC: Resynchronizing to Flare time: 1728089265 ms; timestamp adjusted to: 0 ms.
20:11:41:44.191 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
20:11:41:44.199 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
20:11:41:44.207 Setting CPLD activity LED mode to OR because both sides not being polled.
20:11:41:44.218 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
20:11:41:44.252 EMC: DISPLAY command success, encl number=01, mode=C.
20:11:41:44.364 EMC: Sending changed local info to peer.
20:11:41:51.887 EMC: Flare polling state restored because good generation number 0x2306 received.
20:11:41:51.896 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
20:11:41:51.903 Setting CPLD activity LED mode to AND because both sides being polled.
20:11:41:51.911 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
20:11:41:51.934 EMC: DISPLAY command success, encl number=01, mode=4.
20:11:41:51.959 EMC: Resynchronizing to Flare time: 1770151250 ms; timestamp adjusted to: 0 ms.
20:11:42:31.521 EMC: Sending changed local info to peer.
21:00:00:00.229 EMC: New Day 21
21:00:00:03.239 EMC: Resynchronizing to Flare time: 1814451718 ms; timestamp adjusted to: 0 ms.
21:06:53:56.515 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
21:06:53:56.538 EMC: DISPLAY command success, encl number=01, mode=4.
21:06:53:56.846 Setting CPLD activity LED mode to OR because both sides not being polled.
21:06:53:59.833 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
21:06:53:59.846 EMC: DISPLAY command success, encl number=01, mode=4.
21:06:53:59.851 EMC: ...read processing took 19 ms, status=Success
21:06:54:00.836 Setting CPLD activity LED mode to AND because both sides being polled.
22:00:00:00.172 EMC: New Day 22
22:00:00:01.828 EMC: Resynchronizing to Flare time: 1900889687 ms; timestamp adjusted to: 0 ms.
23:00:00:00.257 EMC: New Day 23
23:00:00:02.705 EMC: Resynchronizing to Flare time: 1987291562 ms; timestamp adjusted to: 0 ms.
24:00:00:00.113 EMC: New Day 24
24:00:00:00.701 EMC: Resynchronizing to Flare time: 2073690156 ms; timestamp adjusted to: 0 ms.
25:00:00:00.047 EMC: New Day 25
25:00:00:02.451 EMC: Resynchronizing to Flare time: 2160092031 ms; timestamp adjusted to: 0 ms.
26:00:00:00.173 EMC: New Day 26
26:00:00:01.743 EMC: Resynchronizing to Flare time: 2246490625 ms; timestamp adjusted to: 0 ms.
26:04:36:34.845 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
26:04:36:34.852 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
26:04:36:34.859 Setting CPLD activity LED mode to OR because both sides not being polled.
26:04:36:34.868 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
26:04:36:34.891 EMC: DISPLAY command success, encl number=01, mode=C.
26:04:36:34.936 EMC: Sending changed local info to peer.
26:04:36:38.123 EMC: Flare polling state restored because good generation number 0x2306 received.
26:04:36:38.132 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
26:04:36:38.139 Setting CPLD activity LED mode to AND because both sides being polled.
26:04:36:38.146 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
26:04:36:38.178 EMC: DISPLAY command success, encl number=01, mode=4.
26:04:36:38.217 EMC: Resynchronizing to Flare time: 2263015000 ms; timestamp adjusted to: 0 ms.
26:04:36:55.322 EMC: Sending changed local info to peer.
26:20:02:23.592 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
26:20:02:23.615 EMC: DISPLAY command success, encl number=01, mode=4.
26:20:02:23.922 Setting CPLD activity LED mode to OR because both sides not being polled.
26:20:02:27.190 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
26:20:02:27.213 EMC: DISPLAY command success, encl number=01, mode=4.
26:20:02:27.521 Setting CPLD activity LED mode to AND because both sides being polled.
27:00:00:00.295 EMC: New Day 27
27:00:00:01.661 EMC: Resynchronizing to Flare time: 2332872812 ms; timestamp adjusted to: 0 ms.
28:00:00:00.178 EMC: New Day 28
28:00:00:02.653 EMC: Resynchronizing to Flare time: 2419291125 ms; timestamp adjusted to: 0 ms.
28:06:21:05.800 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
28:06:21:05.807 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
28:06:21:05.814 Setting CPLD activity LED mode to OR because both sides not being polled.
28:06:21:05.823 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
28:06:21:05.846 EMC: DISPLAY command success, encl number=01, mode=C.
28:06:21:05.880 EMC: Sending changed local info to peer.
28:06:21:09.074 EMC: Flare polling state restored because good generation number 0x2306 received.
28:06:21:09.083 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
28:06:21:09.090 Setting CPLD activity LED mode to AND because both sides being polled.
28:06:21:09.097 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
28:06:21:09.124 EMC: DISPLAY command success, encl number=01, mode=4.
28:06:21:09.135 EMC: Sending changed local info to peer.
28:06:21:09.150 EMC: Resynchronizing to Flare time: 2442092500 ms; timestamp adjusted to: 0 ms.
28:06:21:32.959 EMC: ...read processing took 0 ms, status=Success
28:06:21:43.814 EMC: ...read processing took 0 ms, status=Success
28:06:21:55.494 EMC: ...read processing took 0 ms, status=Success
29:00:00:00.145 EMC: New Day 29
29:00:00:01.016 EMC: Resynchronizing to Flare time: 2505666718 ms; timestamp adjusted to: 0 ms.
29:13:52:06.088 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
29:13:52:06.095 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
29:13:52:06.101 Setting CPLD activity LED mode to OR because both sides not being polled.
29:13:52:06.111 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
29:13:52:06.134 EMC: DISPLAY command success, encl number=01, mode=C.
29:13:52:06.168 EMC: Sending changed local info to peer.
29:13:52:09.334 EMC: Flare polling state restored because good generation number 0x2306 received.
29:13:52:09.342 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
29:13:52:09.349 Setting CPLD activity LED mode to AND because both sides being polled.
29:13:52:09.357 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
29:13:52:09.380 EMC: Sending changed local info to peer.
29:13:52:09.391 EMC: DISPLAY command success, encl number=01, mode=4.
29:13:52:09.431 EMC: Resynchronizing to Flare time: 2555581093 ms; timestamp adjusted to: 0 ms.
30:00:00:00.206 EMC: New Day 30
30:00:00:01.031 EMC: Resynchronizing to Flare time: 2592039062 ms; timestamp adjusted to: 0 ms.
31:00:00:00.287 EMC: New Day 31
31:00:00:01.020 EMC: Year 2011, Month 7
31:00:00:01.045 EMC: Resynchronizing to Flare time: 86490156 ms; timestamp adjusted to: 0 ms.
01:05:34:17.008 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
01:05:34:17.031 EMC: DISPLAY command success, encl number=01, mode=4.
01:05:34:17.337 Setting CPLD activity LED mode to OR because both sides not being polled.
01:05:34:20.233 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
01:05:34:20.256 EMC: DISPLAY command success, encl number=01, mode=4.
01:05:34:20.562 Setting CPLD activity LED mode to AND because both sides being polled.
01:05:34:25.393 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
01:05:34:25.416 EMC: DISPLAY command success, encl number=01, mode=4.
01:05:34:25.722 Setting CPLD activity LED mode to OR because both sides not being polled.
01:05:34:27.648 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
01:05:34:27.671 EMC: DISPLAY command success, encl number=01, mode=4.
01:05:34:27.977 Setting CPLD activity LED mode to AND because both sides being polled.
01:05:45:54.911 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
01:05:45:54.934 EMC: DISPLAY command success, encl number=01, mode=4.
01:05:45:54.940 EMC: ...read processing took 30 ms, status=Success
01:05:45:55.917 Setting CPLD activity LED mode to OR because both sides not being polled.
01:05:45:58.489 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
01:05:45:58.511 EMC: DISPLAY command success, encl number=01, mode=4.
01:05:45:58.817 Setting CPLD activity LED mode to AND because both sides being polled.
01:05:46:03.064 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
01:05:46:03.090 EMC: DISPLAY command success, encl number=01, mode=4.
01:05:46:03.400 Setting CPLD activity LED mode to OR because both sides not being polled.
01:05:46:06.913 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
01:05:46:06.936 EMC: DISPLAY command success, encl number=01, mode=4.
01:05:46:06.941 EMC: ...read processing took 29 ms, status=Success
01:05:46:08.482 Setting CPLD activity LED mode to AND because both sides being polled.
02:00:00:00.211 EMC: New Day 2
02:00:00:00.315 EMC: Resynchronizing to Flare time: 172888750 ms; timestamp adjusted to: 0 ms.
02:01:05:56.662 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
02:01:05:56.668 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
02:01:05:56.676 Setting CPLD activity LED mode to OR because both sides not being polled.
02:01:05:56.684 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
02:01:05:56.710 EMC: DISPLAY command success, encl number=01, mode=C.
02:01:05:56.753 EMC: Sending changed local info to peer.
02:01:05:59.940 EMC: Flare polling state restored because good generation number 0x2306 received.
02:01:05:59.948 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
02:01:05:59.956 Setting CPLD activity LED mode to AND because both sides being polled.
02:01:05:59.963 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
02:01:05:59.988 EMC: DISPLAY command success, encl number=01, mode=4.
02:01:06:04.162 EMC: Sending changed local info to peer.
03:00:00:00.169 EMC: New Day 3
03:00:00:03.314 EMC: Resynchronizing to Flare time: 259287343 ms; timestamp adjusted to: 0 ms.
04:00:00:00.065 EMC: New Day 4
04:13:41:42.209 EMC: DISPLAY command success, encl number=01, mode=C.
04:13:41:42.320 EMC: Sending changed local info to peer.
                                                                                                                                                                  

Buffer Type: SXP Trace
Buffer Id: 0
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 49th at 17:03:03.
00:00:00:01:265 EMC: Setting Update lock: 1
00:00:00:01:399 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:420 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:440 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:460 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:482 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:502 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:507 EMC: Failed to get Power Supply revision info.
00:00:00:01:514 EMC: SXP FW Version:   04.05
00:00:00:01:518 EMC: SXP BOOT Version: 03.00
00:00:00:01:522 EMC: SXP ISTR Version: 03.05
00:00:00:01:526 EMC: MC Version:       16.01
00:00:00:01:531 EMC: DLMC Version:     14.47
00:00:00:01:535 EMC: PS Version:       00.01
00:00:00:01:539 EMC: CPLD Version:     00.09
00:00:00:01:543 EMC: Base SAS Address: 50060480_00b680c0
00:00:00:01:548 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:557 EMC: Exception flag read from register is 0
00:00:00:00:985 EMC: Setting enclosure number to 255
00:00:00:01:005 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:01:026 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:049 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:069 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:090 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:112 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:119 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:142 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:165 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:185 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:239 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:259 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:265 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:287 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:308 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:330 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:350 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:370 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:375 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:383 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:01:389 EMC: Checking for updated FW!
00:00:00:01:393 EMC: Checking for SXP FW download
00:00:00:01:420 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:01:435 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:01:440 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:15:669 WDG EXPIRED: Elapsed time since last WDG run: 799 ms
00:00:00:15:674 WDG: Pong not received from: EMA
                                              

Buffer Type: SXP Trace
Buffer Id: 1
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 946
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:15.7
00:00:00:01:264 EMC: Setting Update lock: 1
00:00:00:01:350 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:384 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:404 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:424 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:445 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:467 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:472 EMC: Failed to get Power Supply revision info.
00:00:00:01:478 EMC: SXP FW Version:   04.05
00:00:00:01:483 EMC: SXP BOOT Version: 03.00
00:00:00:01:487 EMC: SXP ISTR Version: 03.05
00:00:00:01:491 EMC: MC Version:       16.01
00:00:00:01:497 EMC: DLMC Version:     14.47
00:00:00:01:501 EMC: PS Version:       00.01
00:00:00:01:505 EMC: CPLD Version:     00.13
00:00:00:15:768 WDG EXPIRED: Elapsed time since last WDG run: 229 ms
00:00:00:15:773 WDG: Pong not received from: EMA
                 

Buffer Type: SXP Trace
Buffer Id: 2
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:51.
00:00:00:01:263 EMC: Setting Update lock: 1
00:00:00:01:349 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:382 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:402 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:423 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:443 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:465 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:470 EMC: Failed to get Power Supply revision info.
00:00:00:01:476 EMC: SXP FW Version:   04.05
00:00:00:01:481 EMC: SXP BOOT Version: 03.00
00:00:00:01:485 EMC: SXP ISTR Version: 03.05
00:00:00:01:489 EMC: MC Version:       16.01
00:00:00:01:493 EMC: DLMC Version:     14.47
00:00:00:01:498 EMC: PS Version:       00.01
00:00:00:01:502 EMC: CPLD Version:     00.13
00:00:00:01:506 EMC: Base SAS Address: 50060480_00fa80c0
00:00:00:01:510 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:520 EMC: Exception flag read from register is 1
00:00:00:36:984 EMC: Setting enclosure number to 255
00:00:00:37:003 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:37:046 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:068 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:089 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:109 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:130 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:136 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:160 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:183 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:204 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:225 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:269 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:274 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:298 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:321 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:342 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:363 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:385 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:390 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:397 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:37:404 EMC: Checking for updated FW!
00:00:00:37:408 EMC: Checking for SXP FW download
00:00:00:37:436 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:37:451 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:37:456 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:51:683 WDG EXPIRED: Elapsed time since last WDG run: 792 ms
00:00:00:51:688 WDG: Pong not received from: EMA
                                              

Buffer Type: Expander Ring Buffer Trace
Buffer Id: 255
Source: Manual
SXP Major Rev: 04
SXP Minor Rev: 30
Length: -1
Timestamp: 08/16/2011 05:42:23
        
13:00:00:00.294 EMC: New Day 13
13:00:00:01.174 EMC: Resynchronizing to Flare time: 1123289687 ms; timestamp adjusted to: 0 ms.
14:00:00:00.272 EMC: New Day 14
14:00:00:03.475 EMC: Resynchronizing to Flare time: 1209691562 ms; timestamp adjusted to: 0 ms.
15:00:00:00.061 EMC: New Day 15
15:00:00:01.873 EMC: Resynchronizing to Flare time: 1296090156 ms; timestamp adjusted to: 0 ms.
16:00:00:00.092 EMC: New Day 16
16:00:00:02.583 EMC: Resynchronizing to Flare time: 1382492062 ms; timestamp adjusted to: 0 ms.
17:00:00:00.287 EMC: New Day 17
17:00:00:00.768 EMC: Resynchronizing to Flare time: 1468890625 ms; timestamp adjusted to: 0 ms.
18:00:00:00.134 EMC: New Day 18
18:00:00:03.401 EMC: Resynchronizing to Flare time: 1555292500 ms; timestamp adjusted to: 0 ms.
19:00:00:00.325 EMC: New Day 19
19:00:00:03.226 EMC: Resynchronizing to Flare time: 1641691093 ms; timestamp adjusted to: 0 ms.
20:00:00:00.818 EMC: New Day 20
20:00:00:01.815 EMC: Resynchronizing to Flare time: 1728089687 ms; timestamp adjusted to: 0 ms.
21:00:00:00.259 EMC: New Day 21
21:00:00:02.642 EMC: Resynchronizing to Flare time: 1814491593 ms; timestamp adjusted to: 0 ms.
22:00:00:00.285 EMC: New Day 22
22:00:00:03.411 EMC: Resynchronizing to Flare time: 1900893468 ms; timestamp adjusted to: 0 ms.
22:18:43:13.321 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
22:18:43:13.345 EMC: DISPLAY command success, encl number=01, mode=4.
22:18:43:13.644 Setting CPLD activity LED mode to OR because both sides not being polled.
22:18:43:16.568 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
22:18:43:16.594 EMC: DISPLAY command success, encl number=01, mode=4.
22:18:43:16.904 Setting CPLD activity LED mode to AND because both sides being polled.
23:00:00:00.097 EMC: New Day 23
23:00:00:02.748 EMC: Resynchronizing to Flare time: 1987292031 ms; timestamp adjusted to: 0 ms.
24:00:00:00.017 EMC: New Day 24
24:00:00:02.010 EMC: Resynchronizing to Flare time: 2073690625 ms; timestamp adjusted to: 0 ms.
25:00:00:00.186 EMC: New Day 25
25:00:00:01.478 EMC: Resynchronizing to Flare time: 2160089250 ms; timestamp adjusted to: 0 ms.
26:00:00:00.322 EMC: New Day 26
26:00:00:03.171 EMC: Resynchronizing to Flare time: 2246491125 ms; timestamp adjusted to: 0 ms.
27:00:00:00.252 EMC: New Day 27
27:00:00:00.309 EMC: Resynchronizing to Flare time: 2332889687 ms; timestamp adjusted to: 0 ms.
27:19:14:57.947 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
27:19:14:57.953 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
27:19:14:57.961 Setting CPLD activity LED mode to OR because both sides not being polled.
27:19:14:57.970 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
27:19:14:57.994 EMC: DISPLAY command success, encl number=01, mode=C.
27:19:14:58.037 EMC: Sending changed local info to peer.
27:19:15:01.223 EMC: Flare polling state restored because good generation number 0x2306 received.
27:19:15:01.231 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
27:19:15:01.240 Setting CPLD activity LED mode to AND because both sides being polled.
27:19:15:01.247 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
27:19:15:01.282 EMC: DISPLAY command success, encl number=01, mode=4.
27:19:15:01.320 EMC: Resynchronizing to Flare time: 2402173281 ms; timestamp adjusted to: 0 ms.
27:19:16:13.334 EMC: Sending changed local info to peer.
28:00:00:00.968 EMC: New Day 28
28:00:00:01.705 EMC: Resynchronizing to Flare time: 2419219375 ms; timestamp adjusted to: 0 ms.
29:00:00:00.295 EMC: New Day 29
29:00:00:00.934 EMC: Resynchronizing to Flare time: 2505690156 ms; timestamp adjusted to: 0 ms.
30:00:00:00.872 EMC: New Day 30
30:00:00:03.700 EMC: Resynchronizing to Flare time: 2592092031 ms; timestamp adjusted to: 0 ms.
31:00:00:00.150 EMC: New Day 31
31:00:00:00.308 EMC: Resynchronizing to Flare time: 2678487343 ms; timestamp adjusted to: 0 ms.
31:09:22:15.083 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
31:09:22:15.106 EMC: DISPLAY command success, encl number=01, mode=4.
31:09:22:15.412 Setting CPLD activity LED mode to OR because both sides not being polled.
31:09:22:18.667 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
31:09:22:18.690 EMC: DISPLAY command success, encl number=01, mode=4.
31:09:22:18.997 Setting CPLD activity LED mode to AND because both sides being polled.
32:00:00:00.108 EMC: New Day 32
32:00:00:00.385 EMC: Year 2011, Month 8
32:00:00:00.405 EMC: Resynchronizing to Flare time: 86489218 ms; timestamp adjusted to: 0 ms.
02:00:00:00.082 EMC: New Day 2
02:00:00:02.011 EMC: Resynchronizing to Flare time: 172891125 ms; timestamp adjusted to: 0 ms.
03:00:00:00.166 EMC: New Day 3
03:00:00:00.319 EMC: Resynchronizing to Flare time: 259289687 ms; timestamp adjusted to: 0 ms.
04:00:00:00.087 EMC: New Day 4
04:00:00:02.619 EMC: Resynchronizing to Flare time: 345691562 ms; timestamp adjusted to: 0 ms.
05:00:00:00.010 EMC: New Day 5
05:00:00:01.996 EMC: Resynchronizing to Flare time: 432090156 ms; timestamp adjusted to: 0 ms.
06:00:00:00.146 EMC: New Day 6
06:00:00:00.693 EMC: Resynchronizing to Flare time: 518488750 ms; timestamp adjusted to: 0 ms.
07:00:00:00.234 EMC: New Day 7
07:00:00:01.591 EMC: Resynchronizing to Flare time: 604890625 ms; timestamp adjusted to: 0 ms.
08:00:00:00.805 EMC: New Day 8
08:00:00:02.968 EMC: Resynchronizing to Flare time: 691292500 ms; timestamp adjusted to: 0 ms.
09:00:00:00.198 EMC: New Day 9
09:00:00:01.676 EMC: Resynchronizing to Flare time: 777691093 ms; timestamp adjusted to: 0 ms.
09:11:23:24.388 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
09:11:23:24.414 EMC: DISPLAY command success, encl number=01, mode=4.
09:11:23:24.724 Setting CPLD activity LED mode to OR because both sides not being polled.
09:11:23:27.941 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
09:11:23:27.964 EMC: DISPLAY command success, encl number=01, mode=4.
09:11:23:28.272 Setting CPLD activity LED mode to AND because both sides being polled.
10:00:00:00.120 EMC: New Day 10
10:00:00:01.331 EMC: Resynchronizing to Flare time: 864089687 ms; timestamp adjusted to: 0 ms.
10:19:47:43.193 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
10:19:47:43.200 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
10:19:47:43.207 Setting CPLD activity LED mode to OR because both sides not being polled.
10:19:47:43.216 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
10:19:47:43.239 EMC: DISPLAY command success, encl number=01, mode=C.
10:19:47:43.284 EMC: Sending changed local info to peer.
10:19:47:46.469 EMC: Flare polling state restored because good generation number 0x2306 received.
10:19:47:46.478 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
10:19:47:46.485 Setting CPLD activity LED mode to AND because both sides being polled.
10:19:47:46.493 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
10:19:47:46.520 EMC: Sending changed local info to peer.
10:19:47:46.520 EMC: DISPLAY command success, encl number=01, mode=4.
10:19:47:46.568 EMC: Resynchronizing to Flare time: 935338750 ms; timestamp adjusted to: 0 ms.
11:00:00:00.109 EMC: New Day 11
11:00:00:00.597 EMC: Resynchronizing to Flare time: 950416093 ms; timestamp adjusted to: 0 ms.
11:14:34:32.283 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
11:14:34:32.290 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
11:14:34:32.297 Setting CPLD activity LED mode to OR because both sides not being polled.
11:14:34:32.306 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
11:14:34:32.329 EMC: DISPLAY command success, encl number=01, mode=C.
11:14:34:32.374 EMC: Sending changed local info to peer.
11:14:34:35.561 EMC: Flare polling state restored because good generation number 0x2306 received.
11:14:34:35.570 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
11:14:34:35.577 Setting CPLD activity LED mode to AND because both sides being polled.
11:14:34:35.585 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
11:14:34:35.608 EMC: Sending changed local info to peer.
11:14:34:35.619 EMC: DISPLAY command success, encl number=01, mode=4.
11:14:34:35.660 EMC: Resynchronizing to Flare time: 1002929218 ms; timestamp adjusted to: 0 ms.
12:00:00:00.218 EMC: New Day 12
12:00:00:02.886 EMC: Resynchronizing to Flare time: 1036837656 ms; timestamp adjusted to: 0 ms.
12:13:11:27.652 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
12:13:11:27.658 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
12:13:11:27.667 Setting CPLD activity LED mode to OR because both sides not being polled.
12:13:11:27.676 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
12:13:11:27.700 EMC: DISPLAY command success, encl number=01, mode=C.
12:13:11:27.743 EMC: Sending changed local info to peer.
12:13:11:30.930 EMC: Flare polling state restored because good generation number 0x2306 received.
12:13:11:30.938 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
12:13:11:30.946 Setting CPLD activity LED mode to AND because both sides being polled.
12:13:11:30.953 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
12:13:11:30.982 EMC: DISPLAY command success, encl number=01, mode=4.
12:13:11:31.002 EMC: Sending changed local info to peer.
12:13:11:31.007 EMC: Resynchronizing to Flare time: 1084340312 ms; timestamp adjusted to: 0 ms.
13:00:00:00.284 EMC: New Day 13
13:00:00:02.303 EMC: Resynchronizing to Flare time: 1123242812 ms; timestamp adjusted to: 0 ms.
13:22:08:00.762 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
13:22:08:00.785 EMC: DISPLAY command success, encl number=01, mode=4.
13:22:08:01.081 Setting CPLD activity LED mode to OR because both sides not being polled.
13:22:08:04.280 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
13:22:08:04.303 EMC: DISPLAY command success, encl number=01, mode=4.
13:22:08:04.611 Setting CPLD activity LED mode to AND because both sides being polled.
14:00:00:00.136 EMC: New Day 14
14:00:00:00.905 EMC: Resynchronizing to Flare time: 1209690625 ms; timestamp adjusted to: 0 ms.
15:00:00:00.050 EMC: New Day 15
15:00:00:03.207 EMC: Resynchronizing to Flare time: 1296092500 ms; timestamp adjusted to: 0 ms.
15:10:35:02.881 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
15:10:35:02.887 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
15:10:35:02.895 Setting CPLD activity LED mode to OR because both sides not being polled.
15:10:35:02.904 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
15:10:35:02.928 EMC: DISPLAY command success, encl number=01, mode=C.
15:10:35:02.971 EMC: Sending changed local info to peer.
15:10:35:06.161 EMC: Flare polling state restored because good generation number 0x2306 received.
15:10:35:06.169 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
15:10:35:06.176 Setting CPLD activity LED mode to AND because both sides being polled.
15:10:35:06.184 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
15:10:35:06.218 EMC: DISPLAY command success, encl number=01, mode=4.
15:10:35:06.254 EMC: Resynchronizing to Flare time: 1334145156 ms; timestamp adjusted to: 0 ms.
15:10:35:45.206 EMC: Sending changed local info to peer.
16:00:00:00.156 EMC: New Day 16
16:00:00:02.489 EMC: Resynchronizing to Flare time: 1382451718 ms; timestamp adjusted to: 0 ms.
16:05:42:07.946 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
16:05:42:07.979 EMC: DISPLAY command success, encl number=01, mode=C.
                                                                                                                                                                   

Buffer Type: SXP Trace
Buffer Id: 0
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 49th at 17:03:03.
00:00:00:01:265 EMC: Setting Update lock: 1
00:00:00:01:399 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:420 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:440 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:460 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:482 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:502 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:507 EMC: Failed to get Power Supply revision info.
00:00:00:01:514 EMC: SXP FW Version:   04.05
00:00:00:01:518 EMC: SXP BOOT Version: 03.00
00:00:00:01:522 EMC: SXP ISTR Version: 03.05
00:00:00:01:526 EMC: MC Version:       16.01
00:00:00:01:531 EMC: DLMC Version:     14.47
00:00:00:01:535 EMC: PS Version:       00.01
00:00:00:01:539 EMC: CPLD Version:     00.09
00:00:00:01:543 EMC: Base SAS Address: 50060480_00b680c0
00:00:00:01:548 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:557 EMC: Exception flag read from register is 0
00:00:00:00:985 EMC: Setting enclosure number to 255
00:00:00:01:005 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:01:026 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:049 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:069 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:090 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:112 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:119 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:142 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:165 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:185 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:239 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:259 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:265 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:287 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:308 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:330 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:350 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:370 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:375 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:383 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:01:389 EMC: Checking for updated FW!
00:00:00:01:393 EMC: Checking for SXP FW download
00:00:00:01:420 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:01:435 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:01:440 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:15:669 WDG EXPIRED: Elapsed time since last WDG run: 799 ms
00:00:00:15:674 WDG: Pong not received from: EMA
                                              

Buffer Type: SXP Trace
Buffer Id: 1
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 946
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:15.7
00:00:00:01:264 EMC: Setting Update lock: 1
00:00:00:01:350 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:384 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:404 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:424 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:445 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:467 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:472 EMC: Failed to get Power Supply revision info.
00:00:00:01:478 EMC: SXP FW Version:   04.05
00:00:00:01:483 EMC: SXP BOOT Version: 03.00
00:00:00:01:487 EMC: SXP ISTR Version: 03.05
00:00:00:01:491 EMC: MC Version:       16.01
00:00:00:01:497 EMC: DLMC Version:     14.47
00:00:00:01:501 EMC: PS Version:       00.01
00:00:00:01:505 EMC: CPLD Version:     00.13
00:00:00:15:768 WDG EXPIRED: Elapsed time since last WDG run: 229 ms
00:00:00:15:773 WDG: Pong not received from: EMA
                 

Buffer Type: SXP Trace
Buffer Id: 2
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:51.
00:00:00:01:263 EMC: Setting Update lock: 1
00:00:00:01:349 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:382 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:402 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:423 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:443 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:465 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:470 EMC: Failed to get Power Supply revision info.
00:00:00:01:476 EMC: SXP FW Version:   04.05
00:00:00:01:481 EMC: SXP BOOT Version: 03.00
00:00:00:01:485 EMC: SXP ISTR Version: 03.05
00:00:00:01:489 EMC: MC Version:       16.01
00:00:00:01:493 EMC: DLMC Version:     14.47
00:00:00:01:498 EMC: PS Version:       00.01
00:00:00:01:502 EMC: CPLD Version:     00.13
00:00:00:01:506 EMC: Base SAS Address: 50060480_00fa80c0
00:00:00:01:510 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:520 EMC: Exception flag read from register is 1
00:00:00:36:984 EMC: Setting enclosure number to 255
00:00:00:37:003 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:37:046 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:068 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:089 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:109 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:130 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:136 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:160 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:183 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:204 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:225 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:269 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:274 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:298 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:321 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:342 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:363 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:385 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:390 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:397 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:37:404 EMC: Checking for updated FW!
00:00:00:37:408 EMC: Checking for SXP FW download
00:00:00:37:436 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:37:451 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:37:456 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:51:683 WDG EXPIRED: Elapsed time since last WDG run: 792 ms
00:00:00:51:688 WDG: Pong not received from: EMA
                                              

Buffer Type: Expander Ring Buffer Trace
Buffer Id: 255
Source: Manual
SXP Major Rev: 04
SXP Minor Rev: 30
Length: -1
Timestamp: 09/04/2011 16:42:22
        
10:19:47:43.216 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
10:19:47:43.239 EMC: DISPLAY command success, encl number=01, mode=C.
10:19:47:43.284 EMC: Sending changed local info to peer.
10:19:47:46.469 EMC: Flare polling state restored because good generation number 0x2306 received.
10:19:47:46.478 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
10:19:47:46.485 Setting CPLD activity LED mode to AND because both sides being polled.
10:19:47:46.493 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
10:19:47:46.520 EMC: Sending changed local info to peer.
10:19:47:46.520 EMC: DISPLAY command success, encl number=01, mode=4.
10:19:47:46.568 EMC: Resynchronizing to Flare time: 935338750 ms; timestamp adjusted to: 0 ms.
11:00:00:00.109 EMC: New Day 11
11:00:00:00.597 EMC: Resynchronizing to Flare time: 950416093 ms; timestamp adjusted to: 0 ms.
11:14:34:32.283 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
11:14:34:32.290 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
11:14:34:32.297 Setting CPLD activity LED mode to OR because both sides not being polled.
11:14:34:32.306 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
11:14:34:32.329 EMC: DISPLAY command success, encl number=01, mode=C.
11:14:34:32.374 EMC: Sending changed local info to peer.
11:14:34:35.561 EMC: Flare polling state restored because good generation number 0x2306 received.
11:14:34:35.570 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
11:14:34:35.577 Setting CPLD activity LED mode to AND because both sides being polled.
11:14:34:35.585 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
11:14:34:35.608 EMC: Sending changed local info to peer.
11:14:34:35.619 EMC: DISPLAY command success, encl number=01, mode=4.
11:14:34:35.660 EMC: Resynchronizing to Flare time: 1002929218 ms; timestamp adjusted to: 0 ms.
12:00:00:00.218 EMC: New Day 12
12:00:00:02.886 EMC: Resynchronizing to Flare time: 1036837656 ms; timestamp adjusted to: 0 ms.
12:13:11:27.652 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
12:13:11:27.658 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
12:13:11:27.667 Setting CPLD activity LED mode to OR because both sides not being polled.
12:13:11:27.676 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
12:13:11:27.700 EMC: DISPLAY command success, encl number=01, mode=C.
12:13:11:27.743 EMC: Sending changed local info to peer.
12:13:11:30.930 EMC: Flare polling state restored because good generation number 0x2306 received.
12:13:11:30.938 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
12:13:11:30.946 Setting CPLD activity LED mode to AND because both sides being polled.
12:13:11:30.953 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
12:13:11:30.982 EMC: DISPLAY command success, encl number=01, mode=4.
12:13:11:31.002 EMC: Sending changed local info to peer.
12:13:11:31.007 EMC: Resynchronizing to Flare time: 1084340312 ms; timestamp adjusted to: 0 ms.
13:00:00:00.284 EMC: New Day 13
13:00:00:02.303 EMC: Resynchronizing to Flare time: 1123242812 ms; timestamp adjusted to: 0 ms.
13:22:08:00.762 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
13:22:08:00.785 EMC: DISPLAY command success, encl number=01, mode=4.
13:22:08:01.081 Setting CPLD activity LED mode to OR because both sides not being polled.
13:22:08:04.280 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
13:22:08:04.303 EMC: DISPLAY command success, encl number=01, mode=4.
13:22:08:04.611 Setting CPLD activity LED mode to AND because both sides being polled.
14:00:00:00.136 EMC: New Day 14
14:00:00:00.905 EMC: Resynchronizing to Flare time: 1209690625 ms; timestamp adjusted to: 0 ms.
15:00:00:00.050 EMC: New Day 15
15:00:00:03.207 EMC: Resynchronizing to Flare time: 1296092500 ms; timestamp adjusted to: 0 ms.
15:10:35:02.881 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
15:10:35:02.887 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
15:10:35:02.895 Setting CPLD activity LED mode to OR because both sides not being polled.
15:10:35:02.904 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
15:10:35:02.928 EMC: DISPLAY command success, encl number=01, mode=C.
15:10:35:02.971 EMC: Sending changed local info to peer.
15:10:35:06.161 EMC: Flare polling state restored because good generation number 0x2306 received.
15:10:35:06.169 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
15:10:35:06.176 Setting CPLD activity LED mode to AND because both sides being polled.
15:10:35:06.184 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
15:10:35:06.218 EMC: DISPLAY command success, encl number=01, mode=4.
15:10:35:06.254 EMC: Resynchronizing to Flare time: 1334145156 ms; timestamp adjusted to: 0 ms.
15:10:35:45.206 EMC: Sending changed local info to peer.
16:00:00:00.156 EMC: New Day 16
16:00:00:02.489 EMC: Resynchronizing to Flare time: 1382451718 ms; timestamp adjusted to: 0 ms.
16:05:42:07.918 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
16:05:42:07.927 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
16:05:42:07.935 Setting CPLD activity LED mode to OR because both sides not being polled.
16:05:42:07.946 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
16:05:42:07.979 EMC: DISPLAY command success, encl number=01, mode=C.
16:05:42:08.106 EMC: Sending changed local info to peer.
16:05:42:09.661 EMC: ...read processing took 0 ms, status=Success
16:05:42:10.536 EMC: ...write took 869 ms, status=Success
16:05:42:11.846 EMC: Flare polling state restored because good generation number 0x2306 received.
16:05:42:11.854 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
16:05:42:11.861 Setting CPLD activity LED mode to AND because both sides being polled.
16:05:42:11.868 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
16:05:42:11.890 EMC: DISPLAY command success, encl number=01, mode=4.
16:05:42:11.912 EMC: Resynchronizing to Flare time: 1402949046 ms; timestamp adjusted to: 0 ms.
16:05:42:29.414 EMC: Sending changed local info to peer.
16:05:42:34.049 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
16:05:42:34.058 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
16:05:42:34.065 Setting CPLD activity LED mode to OR because both sides not being polled.
16:05:42:34.077 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
16:05:42:34.110 EMC: DISPLAY command success, encl number=01, mode=C.
16:05:42:34.224 EMC: Sending changed local info to peer.
16:05:42:36.618 EMC: Flare polling state restored because good generation number 0x2306 received.
16:05:42:36.627 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
16:05:42:36.634 Setting CPLD activity LED mode to AND because both sides being polled.
16:05:42:36.642 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
16:05:42:36.655 EMC: DISPLAY command success, encl number=01, mode=4.
16:05:42:40.445 EMC: Sending changed local info to peer.
16:05:42:41.711 EMC: ...read processing took 0 ms, status=Success
16:05:42:42.923 EMC: ...write took 1207 ms, status=Success
17:00:00:00.136 EMC: New Day 17
17:00:00:03.144 EMC: Resynchronizing to Flare time: 1468870000 ms; timestamp adjusted to: 0 ms.
17:06:02:07.187 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
17:06:02:07.211 EMC: DISPLAY command success, encl number=01, mode=4.
17:06:02:07.524 Setting CPLD activity LED mode to OR because both sides not being polled.
17:06:02:10.726 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
17:06:02:10.749 EMC: DISPLAY command success, encl number=01, mode=4.
17:06:02:11.056 Setting CPLD activity LED mode to AND because both sides being polled.
18:00:00:00.227 EMC: New Day 18
18:00:00:03.194 EMC: Resynchronizing to Flare time: 1555291593 ms; timestamp adjusted to: 0 ms.
18:04:46:25.389 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
18:04:46:25.396 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
18:04:46:25.403 Setting CPLD activity LED mode to OR because both sides not being polled.
18:04:46:25.412 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
18:04:46:25.435 EMC: DISPLAY command success, encl number=01, mode=C.
18:04:46:25.479 EMC: Sending changed local info to peer.
18:04:46:28.668 EMC: Flare polling state restored because good generation number 0x2306 received.
18:04:46:28.676 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
18:04:46:28.685 Setting CPLD activity LED mode to AND because both sides being polled.
18:04:46:28.692 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
18:04:46:28.717 EMC: DISPLAY command success, encl number=01, mode=4.
18:04:46:28.756 EMC: Resynchronizing to Flare time: 1572406562 ms; timestamp adjusted to: 0 ms.
18:04:46:46.616 EMC: Sending changed local info to peer.
19:00:00:00.152 EMC: New Day 19
19:00:00:01.843 EMC: Resynchronizing to Flare time: 1641673750 ms; timestamp adjusted to: 0 ms.
20:00:00:00.729 EMC: New Day 20
20:00:00:02.573 EMC: Resynchronizing to Flare time: 1728092062 ms; timestamp adjusted to: 0 ms.
21:00:00:00.275 EMC: New Day 21
21:00:00:02.012 EMC: Resynchronizing to Flare time: 1814490625 ms; timestamp adjusted to: 0 ms.
22:00:00:00.021 EMC: New Day 22
22:00:00:01.428 EMC: Resynchronizing to Flare time: 1900889234 ms; timestamp adjusted to: 0 ms.
23:00:00:00.239 EMC: New Day 23
23:00:00:03.250 EMC: Resynchronizing to Flare time: 1987291125 ms; timestamp adjusted to: 0 ms.
24:00:00:00.139 EMC: New Day 24
24:00:00:00.244 EMC: Resynchronizing to Flare time: 2073689687 ms; timestamp adjusted to: 0 ms.
25:00:00:00.047 EMC: New Day 25
25:00:00:01.809 EMC: Resynchronizing to Flare time: 2160091562 ms; timestamp adjusted to: 0 ms.
26:00:00:00.262 EMC: New Day 26
26:00:00:00.897 EMC: Resynchronizing to Flare time: 2246490156 ms; timestamp adjusted to: 0 ms.
27:00:00:00.132 EMC: New Day 27
27:00:00:00.465 EMC: Resynchronizing to Flare time: 2332888750 ms; timestamp adjusted to: 0 ms.
28:00:00:00.486 EMC: New Day 28
28:00:00:02.978 EMC: Resynchronizing to Flare time: 2419290625 ms; timestamp adjusted to: 0 ms.
29:00:00:00.217 EMC: New Day 29
29:00:00:00.337 EMC: Resynchronizing to Flare time: 2505689250 ms; timestamp adjusted to: 0 ms.
30:00:00:00.281 EMC: New Day 30
30:00:00:01.640 EMC: Resynchronizing to Flare time: 2592091093 ms; timestamp adjusted to: 0 ms.
31:00:00:00.018 EMC: New Day 31
31:00:00:00.097 EMC: Resynchronizing to Flare time: 2678489687 ms; timestamp adjusted to: 0 ms.
32:00:00:00.146 EMC: New Day 32
32:00:00:02.518 EMC: Year 2011, Month 9
32:00:00:02.539 EMC: Resynchronizing to Flare time: 86491562 ms; timestamp adjusted to: 0 ms.
02:00:00:00.060 EMC: New Day 2
02:00:00:01.971 EMC: Resynchronizing to Flare time: 172890156 ms; timestamp adjusted to: 0 ms.
02:06:50:05.110 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
02:06:50:05.134 EMC: DISPLAY command success, encl number=01, mode=4.
02:06:50:05.442 Setting CPLD activity LED mode to OR because both sides not being polled.
02:06:50:08.037 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
02:06:50:08.050 EMC: DISPLAY command success, encl number=01, mode=4.
02:06:50:08.360 Setting CPLD activity LED mode to AND because both sides being polled.
03:00:00:00.291 EMC: New Day 3
03:00:00:00.871 EMC: Resynchronizing to Flare time: 259288750 ms; timestamp adjusted to: 0 ms.
04:00:00:00.072 EMC: New Day 4
04:00:00:01.737 EMC: Resynchronizing to Flare time: 345690625 ms; timestamp adjusted to: 0 ms.
                                                                                                                                                                 

Buffer Type: SXP Trace
Buffer Id: 0
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 49th at 17:03:03.
00:00:00:01:265 EMC: Setting Update lock: 1
00:00:00:01:399 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:420 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:440 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:460 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:482 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:502 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:507 EMC: Failed to get Power Supply revision info.
00:00:00:01:514 EMC: SXP FW Version:   04.05
00:00:00:01:518 EMC: SXP BOOT Version: 03.00
00:00:00:01:522 EMC: SXP ISTR Version: 03.05
00:00:00:01:526 EMC: MC Version:       16.01
00:00:00:01:531 EMC: DLMC Version:     14.47
00:00:00:01:535 EMC: PS Version:       00.01
00:00:00:01:539 EMC: CPLD Version:     00.09
00:00:00:01:543 EMC: Base SAS Address: 50060480_00b680c0
00:00:00:01:548 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:557 EMC: Exception flag read from register is 0
00:00:00:00:985 EMC: Setting enclosure number to 255
00:00:00:01:005 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:01:026 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:049 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:069 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:090 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:112 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:119 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:142 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:165 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:185 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:239 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:259 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:265 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:287 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:308 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:330 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:350 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:370 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:375 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:383 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:01:389 EMC: Checking for updated FW!
00:00:00:01:393 EMC: Checking for SXP FW download
00:00:00:01:420 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:01:435 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:01:440 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:15:669 WDG EXPIRED: Elapsed time since last WDG run: 799 ms
00:00:00:15:674 WDG: Pong not received from: EMA
                                              

Buffer Type: SXP Trace
Buffer Id: 1
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 946
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:15.7
00:00:00:01:264 EMC: Setting Update lock: 1
00:00:00:01:350 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:384 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:404 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:424 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:445 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:467 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:472 EMC: Failed to get Power Supply revision info.
00:00:00:01:478 EMC: SXP FW Version:   04.05
00:00:00:01:483 EMC: SXP BOOT Version: 03.00
00:00:00:01:487 EMC: SXP ISTR Version: 03.05
00:00:00:01:491 EMC: MC Version:       16.01
00:00:00:01:497 EMC: DLMC Version:     14.47
00:00:00:01:501 EMC: PS Version:       00.01
00:00:00:01:505 EMC: CPLD Version:     00.13
00:00:00:15:768 WDG EXPIRED: Elapsed time since last WDG run: 229 ms
00:00:00:15:773 WDG: Pong not received from: EMA
                 

Buffer Type: SXP Trace
Buffer Id: 2
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:51.
00:00:00:01:263 EMC: Setting Update lock: 1
00:00:00:01:349 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:382 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:402 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:423 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:443 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:465 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:470 EMC: Failed to get Power Supply revision info.
00:00:00:01:476 EMC: SXP FW Version:   04.05
00:00:00:01:481 EMC: SXP BOOT Version: 03.00
00:00:00:01:485 EMC: SXP ISTR Version: 03.05
00:00:00:01:489 EMC: MC Version:       16.01
00:00:00:01:493 EMC: DLMC Version:     14.47
00:00:00:01:498 EMC: PS Version:       00.01
00:00:00:01:502 EMC: CPLD Version:     00.13
00:00:00:01:506 EMC: Base SAS Address: 50060480_00fa80c0
00:00:00:01:510 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:520 EMC: Exception flag read from register is 1
00:00:00:36:984 EMC: Setting enclosure number to 255
00:00:00:37:003 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:37:046 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:068 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:089 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:109 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:130 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:136 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:160 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:183 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:204 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:225 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:269 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:274 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:298 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:321 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:342 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:363 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:385 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:390 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:397 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:37:404 EMC: Checking for updated FW!
00:00:00:37:408 EMC: Checking for SXP FW download
00:00:00:37:436 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:37:451 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:37:456 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:51:683 WDG EXPIRED: Elapsed time since last WDG run: 792 ms
00:00:00:51:688 WDG: Pong not received from: EMA
                                              

Buffer Type: Expander Ring Buffer Trace
Buffer Id: 255
Source: Manual
SXP Major Rev: 04
SXP Minor Rev: 30
Length: -1
Timestamp: 09/13/2011 09:42:24
        
12:13:11:27.700 EMC: DISPLAY command success, encl number=01, mode=C.
12:13:11:27.743 EMC: Sending changed local info to peer.
12:13:11:30.930 EMC: Flare polling state restored because good generation number 0x2306 received.
12:13:11:30.938 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
12:13:11:30.946 Setting CPLD activity LED mode to AND because both sides being polled.
12:13:11:30.953 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
12:13:11:30.982 EMC: DISPLAY command success, encl number=01, mode=4.
12:13:11:31.002 EMC: Sending changed local info to peer.
12:13:11:31.007 EMC: Resynchronizing to Flare time: 1084340312 ms; timestamp adjusted to: 0 ms.
13:00:00:00.284 EMC: New Day 13
13:00:00:02.303 EMC: Resynchronizing to Flare time: 1123242812 ms; timestamp adjusted to: 0 ms.
13:22:08:00.762 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
13:22:08:00.785 EMC: DISPLAY command success, encl number=01, mode=4.
13:22:08:01.081 Setting CPLD activity LED mode to OR because both sides not being polled.
13:22:08:04.280 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
13:22:08:04.303 EMC: DISPLAY command success, encl number=01, mode=4.
13:22:08:04.611 Setting CPLD activity LED mode to AND because both sides being polled.
14:00:00:00.136 EMC: New Day 14
14:00:00:00.905 EMC: Resynchronizing to Flare time: 1209690625 ms; timestamp adjusted to: 0 ms.
15:00:00:00.050 EMC: New Day 15
15:00:00:03.207 EMC: Resynchronizing to Flare time: 1296092500 ms; timestamp adjusted to: 0 ms.
15:10:35:02.881 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
15:10:35:02.887 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
15:10:35:02.895 Setting CPLD activity LED mode to OR because both sides not being polled.
15:10:35:02.904 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
15:10:35:02.928 EMC: DISPLAY command success, encl number=01, mode=C.
15:10:35:02.971 EMC: Sending changed local info to peer.
15:10:35:06.161 EMC: Flare polling state restored because good generation number 0x2306 received.
15:10:35:06.169 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
15:10:35:06.176 Setting CPLD activity LED mode to AND because both sides being polled.
15:10:35:06.184 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
15:10:35:06.218 EMC: DISPLAY command success, encl number=01, mode=4.
15:10:35:06.254 EMC: Resynchronizing to Flare time: 1334145156 ms; timestamp adjusted to: 0 ms.
15:10:35:45.206 EMC: Sending changed local info to peer.
16:00:00:00.156 EMC: New Day 16
16:00:00:02.489 EMC: Resynchronizing to Flare time: 1382451718 ms; timestamp adjusted to: 0 ms.
16:05:42:07.918 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
16:05:42:07.927 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
16:05:42:07.935 Setting CPLD activity LED mode to OR because both sides not being polled.
16:05:42:07.946 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
16:05:42:07.979 EMC: DISPLAY command success, encl number=01, mode=C.
16:05:42:08.106 EMC: Sending changed local info to peer.
16:05:42:09.661 EMC: ...read processing took 0 ms, status=Success
16:05:42:10.536 EMC: ...write took 869 ms, status=Success
16:05:42:11.846 EMC: Flare polling state restored because good generation number 0x2306 received.
16:05:42:11.854 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
16:05:42:11.861 Setting CPLD activity LED mode to AND because both sides being polled.
16:05:42:11.868 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
16:05:42:11.890 EMC: DISPLAY command success, encl number=01, mode=4.
16:05:42:11.912 EMC: Resynchronizing to Flare time: 1402949046 ms; timestamp adjusted to: 0 ms.
16:05:42:29.414 EMC: Sending changed local info to peer.
16:05:42:34.049 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
16:05:42:34.058 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
16:05:42:34.065 Setting CPLD activity LED mode to OR because both sides not being polled.
16:05:42:34.077 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
16:05:42:34.110 EMC: DISPLAY command success, encl number=01, mode=C.
16:05:42:34.224 EMC: Sending changed local info to peer.
16:05:42:36.618 EMC: Flare polling state restored because good generation number 0x2306 received.
16:05:42:36.627 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
16:05:42:36.634 Setting CPLD activity LED mode to AND because both sides being polled.
16:05:42:36.642 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
16:05:42:36.655 EMC: DISPLAY command success, encl number=01, mode=4.
16:05:42:40.445 EMC: Sending changed local info to peer.
16:05:42:41.711 EMC: ...read processing took 0 ms, status=Success
16:05:42:42.923 EMC: ...write took 1207 ms, status=Success
17:00:00:00.136 EMC: New Day 17
17:00:00:03.144 EMC: Resynchronizing to Flare time: 1468870000 ms; timestamp adjusted to: 0 ms.
17:06:02:07.187 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
17:06:02:07.211 EMC: DISPLAY command success, encl number=01, mode=4.
17:06:02:07.524 Setting CPLD activity LED mode to OR because both sides not being polled.
17:06:02:10.726 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
17:06:02:10.749 EMC: DISPLAY command success, encl number=01, mode=4.
17:06:02:11.056 Setting CPLD activity LED mode to AND because both sides being polled.
18:00:00:00.227 EMC: New Day 18
18:00:00:03.194 EMC: Resynchronizing to Flare time: 1555291593 ms; timestamp adjusted to: 0 ms.
18:04:46:25.389 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
18:04:46:25.396 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
18:04:46:25.403 Setting CPLD activity LED mode to OR because both sides not being polled.
18:04:46:25.412 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
18:04:46:25.435 EMC: DISPLAY command success, encl number=01, mode=C.
18:04:46:25.479 EMC: Sending changed local info to peer.
18:04:46:28.668 EMC: Flare polling state restored because good generation number 0x2306 received.
18:04:46:28.676 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
18:04:46:28.685 Setting CPLD activity LED mode to AND because both sides being polled.
18:04:46:28.692 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
18:04:46:28.717 EMC: DISPLAY command success, encl number=01, mode=4.
18:04:46:28.756 EMC: Resynchronizing to Flare time: 1572406562 ms; timestamp adjusted to: 0 ms.
18:04:46:46.616 EMC: Sending changed local info to peer.
19:00:00:00.152 EMC: New Day 19
19:00:00:01.843 EMC: Resynchronizing to Flare time: 1641673750 ms; timestamp adjusted to: 0 ms.
20:00:00:00.729 EMC: New Day 20
20:00:00:02.573 EMC: Resynchronizing to Flare time: 1728092062 ms; timestamp adjusted to: 0 ms.
21:00:00:00.275 EMC: New Day 21
21:00:00:02.012 EMC: Resynchronizing to Flare time: 1814490625 ms; timestamp adjusted to: 0 ms.
22:00:00:00.021 EMC: New Day 22
22:00:00:01.428 EMC: Resynchronizing to Flare time: 1900889234 ms; timestamp adjusted to: 0 ms.
23:00:00:00.239 EMC: New Day 23
23:00:00:03.250 EMC: Resynchronizing to Flare time: 1987291125 ms; timestamp adjusted to: 0 ms.
24:00:00:00.139 EMC: New Day 24
24:00:00:00.244 EMC: Resynchronizing to Flare time: 2073689687 ms; timestamp adjusted to: 0 ms.
25:00:00:00.047 EMC: New Day 25
25:00:00:01.809 EMC: Resynchronizing to Flare time: 2160091562 ms; timestamp adjusted to: 0 ms.
26:00:00:00.262 EMC: New Day 26
26:00:00:00.897 EMC: Resynchronizing to Flare time: 2246490156 ms; timestamp adjusted to: 0 ms.
27:00:00:00.132 EMC: New Day 27
27:00:00:00.465 EMC: Resynchronizing to Flare time: 2332888750 ms; timestamp adjusted to: 0 ms.
28:00:00:00.486 EMC: New Day 28
28:00:00:02.978 EMC: Resynchronizing to Flare time: 2419290625 ms; timestamp adjusted to: 0 ms.
29:00:00:00.217 EMC: New Day 29
29:00:00:00.337 EMC: Resynchronizing to Flare time: 2505689250 ms; timestamp adjusted to: 0 ms.
30:00:00:00.281 EMC: New Day 30
30:00:00:01.640 EMC: Resynchronizing to Flare time: 2592091093 ms; timestamp adjusted to: 0 ms.
31:00:00:00.018 EMC: New Day 31
31:00:00:00.097 EMC: Resynchronizing to Flare time: 2678489687 ms; timestamp adjusted to: 0 ms.
32:00:00:00.146 EMC: New Day 32
32:00:00:02.518 EMC: Year 2011, Month 9
32:00:00:02.539 EMC: Resynchronizing to Flare time: 86491562 ms; timestamp adjusted to: 0 ms.
02:00:00:00.060 EMC: New Day 2
02:00:00:01.971 EMC: Resynchronizing to Flare time: 172890156 ms; timestamp adjusted to: 0 ms.
02:06:50:05.110 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
02:06:50:05.134 EMC: DISPLAY command success, encl number=01, mode=4.
02:06:50:05.442 Setting CPLD activity LED mode to OR because both sides not being polled.
02:06:50:08.037 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
02:06:50:08.050 EMC: DISPLAY command success, encl number=01, mode=4.
02:06:50:08.360 Setting CPLD activity LED mode to AND because both sides being polled.
03:00:00:00.291 EMC: New Day 3
03:00:00:00.871 EMC: Resynchronizing to Flare time: 259288750 ms; timestamp adjusted to: 0 ms.
04:00:00:00.072 EMC: New Day 4
04:00:00:01.737 EMC: Resynchronizing to Flare time: 345690625 ms; timestamp adjusted to: 0 ms.
05:00:00:00.076 EMC: New Day 5
05:00:00:02.970 EMC: Resynchronizing to Flare time: 432092500 ms; timestamp adjusted to: 0 ms.
06:00:00:00.126 EMC: New Day 6
06:00:00:01.550 EMC: Resynchronizing to Flare time: 518491093 ms; timestamp adjusted to: 0 ms.
07:00:00:00.234 EMC: New Day 7
07:00:00:01.150 EMC: Resynchronizing to Flare time: 604889687 ms; timestamp adjusted to: 0 ms.
08:00:00:00.823 EMC: New Day 8
08:00:00:03.576 EMC: Resynchronizing to Flare time: 691291562 ms; timestamp adjusted to: 0 ms.
09:00:00:00.179 EMC: New Day 9
09:00:00:01.646 EMC: Resynchronizing to Flare time: 777690156 ms; timestamp adjusted to: 0 ms.
10:00:00:00.119 EMC: New Day 10
10:00:00:02.298 EMC: Resynchronizing to Flare time: 864092046 ms; timestamp adjusted to: 0 ms.
11:00:00:00.145 EMC: New Day 11
11:00:00:01.103 EMC: Resynchronizing to Flare time: 950490625 ms; timestamp adjusted to: 0 ms.
11:16:38:08.616 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
11:16:38:08.623 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
11:16:38:08.630 Setting CPLD activity LED mode to OR because both sides not being polled.
11:16:38:08.640 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
11:16:38:08.662 EMC: DISPLAY command success, encl number=01, mode=C.
11:16:38:08.709 EMC: Sending changed local info to peer.
11:16:38:11.894 EMC: Flare polling state restored because good generation number 0x2306 received.
11:16:38:11.903 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
11:16:38:11.910 Setting CPLD activity LED mode to AND because both sides being polled.
11:16:38:11.918 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
11:16:38:11.921 EMC: Sending changed local info to peer.
11:16:38:11.939 EMC: DISPLAY command success, encl number=01, mode=4.
11:16:38:11.982 EMC: Resynchronizing to Flare time: 1010353750 ms; timestamp adjusted to: 0 ms.
12:00:00:00.614 EMC: New Day 12
12:00:00:02.988 EMC: Resynchronizing to Flare time: 1036830156 ms; timestamp adjusted to: 0 ms.
13:00:00:00.274 EMC: New Day 13
13:00:00:03.023 EMC: Resynchronizing to Flare time: 1123291093 ms; timestamp adjusted to: 0 ms.
                                                                                                                                                                 

Buffer Type: SXP Trace
Buffer Id: 0
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 49th at 17:03:03.
00:00:00:01:265 EMC: Setting Update lock: 1
00:00:00:01:399 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:420 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:440 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:460 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:482 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:502 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:507 EMC: Failed to get Power Supply revision info.
00:00:00:01:514 EMC: SXP FW Version:   04.05
00:00:00:01:518 EMC: SXP BOOT Version: 03.00
00:00:00:01:522 EMC: SXP ISTR Version: 03.05
00:00:00:01:526 EMC: MC Version:       16.01
00:00:00:01:531 EMC: DLMC Version:     14.47
00:00:00:01:535 EMC: PS Version:       00.01
00:00:00:01:539 EMC: CPLD Version:     00.09
00:00:00:01:543 EMC: Base SAS Address: 50060480_00b680c0
00:00:00:01:548 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:557 EMC: Exception flag read from register is 0
00:00:00:00:985 EMC: Setting enclosure number to 255
00:00:00:01:005 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:01:026 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:049 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:069 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:090 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:112 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:119 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:142 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:165 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:185 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:239 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:259 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:265 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:287 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:308 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:330 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:350 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:370 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:375 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:383 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:01:389 EMC: Checking for updated FW!
00:00:00:01:393 EMC: Checking for SXP FW download
00:00:00:01:420 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:01:435 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:01:440 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:15:669 WDG EXPIRED: Elapsed time since last WDG run: 799 ms
00:00:00:15:674 WDG: Pong not received from: EMA
                                              

Buffer Type: SXP Trace
Buffer Id: 1
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 946
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:15.7
00:00:00:01:264 EMC: Setting Update lock: 1
00:00:00:01:350 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:384 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:404 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:424 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:445 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:467 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:472 EMC: Failed to get Power Supply revision info.
00:00:00:01:478 EMC: SXP FW Version:   04.05
00:00:00:01:483 EMC: SXP BOOT Version: 03.00
00:00:00:01:487 EMC: SXP ISTR Version: 03.05
00:00:00:01:491 EMC: MC Version:       16.01
00:00:00:01:497 EMC: DLMC Version:     14.47
00:00:00:01:501 EMC: PS Version:       00.01
00:00:00:01:505 EMC: CPLD Version:     00.13
00:00:00:15:768 WDG EXPIRED: Elapsed time since last WDG run: 229 ms
00:00:00:15:773 WDG: Pong not received from: EMA
                 

Buffer Type: SXP Trace
Buffer Id: 2
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:51.
00:00:00:01:263 EMC: Setting Update lock: 1
00:00:00:01:349 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:382 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:402 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:423 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:443 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:465 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:470 EMC: Failed to get Power Supply revision info.
00:00:00:01:476 EMC: SXP FW Version:   04.05
00:00:00:01:481 EMC: SXP BOOT Version: 03.00
00:00:00:01:485 EMC: SXP ISTR Version: 03.05
00:00:00:01:489 EMC: MC Version:       16.01
00:00:00:01:493 EMC: DLMC Version:     14.47
00:00:00:01:498 EMC: PS Version:       00.01
00:00:00:01:502 EMC: CPLD Version:     00.13
00:00:00:01:506 EMC: Base SAS Address: 50060480_00fa80c0
00:00:00:01:510 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:520 EMC: Exception flag read from register is 1
00:00:00:36:984 EMC: Setting enclosure number to 255
00:00:00:37:003 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:37:046 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:068 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:089 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:109 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:130 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:136 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:160 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:183 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:204 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:225 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:269 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:274 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:298 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:321 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:342 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:363 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:385 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:390 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:397 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:37:404 EMC: Checking for updated FW!
00:00:00:37:408 EMC: Checking for SXP FW download
00:00:00:37:436 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:37:451 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:37:456 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:51:683 WDG EXPIRED: Elapsed time since last WDG run: 792 ms
00:00:00:51:688 WDG: Pong not received from: EMA
                                              

Buffer Type: Expander Ring Buffer Trace
Buffer Id: 255
Source: Manual
SXP Major Rev: 04
SXP Minor Rev: 30
Length: -1
Timestamp: 09/26/2011 09:42:22
        
17:00:00:03.144 EMC: Resynchronizing to Flare time: 1468870000 ms; timestamp adjusted to: 0 ms.
17:06:02:07.187 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
17:06:02:07.211 EMC: DISPLAY command success, encl number=01, mode=4.
17:06:02:07.524 Setting CPLD activity LED mode to OR because both sides not being polled.
17:06:02:10.726 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
17:06:02:10.749 EMC: DISPLAY command success, encl number=01, mode=4.
17:06:02:11.056 Setting CPLD activity LED mode to AND because both sides being polled.
18:00:00:00.227 EMC: New Day 18
18:00:00:03.194 EMC: Resynchronizing to Flare time: 1555291593 ms; timestamp adjusted to: 0 ms.
18:04:46:25.389 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
18:04:46:25.396 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
18:04:46:25.403 Setting CPLD activity LED mode to OR because both sides not being polled.
18:04:46:25.412 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
18:04:46:25.435 EMC: DISPLAY command success, encl number=01, mode=C.
18:04:46:25.479 EMC: Sending changed local info to peer.
18:04:46:28.668 EMC: Flare polling state restored because good generation number 0x2306 received.
18:04:46:28.676 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
18:04:46:28.685 Setting CPLD activity LED mode to AND because both sides being polled.
18:04:46:28.692 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
18:04:46:28.717 EMC: DISPLAY command success, encl number=01, mode=4.
18:04:46:28.756 EMC: Resynchronizing to Flare time: 1572406562 ms; timestamp adjusted to: 0 ms.
18:04:46:46.616 EMC: Sending changed local info to peer.
19:00:00:00.152 EMC: New Day 19
19:00:00:01.843 EMC: Resynchronizing to Flare time: 1641673750 ms; timestamp adjusted to: 0 ms.
20:00:00:00.729 EMC: New Day 20
20:00:00:02.573 EMC: Resynchronizing to Flare time: 1728092062 ms; timestamp adjusted to: 0 ms.
21:00:00:00.275 EMC: New Day 21
21:00:00:02.012 EMC: Resynchronizing to Flare time: 1814490625 ms; timestamp adjusted to: 0 ms.
22:00:00:00.021 EMC: New Day 22
22:00:00:01.428 EMC: Resynchronizing to Flare time: 1900889234 ms; timestamp adjusted to: 0 ms.
23:00:00:00.239 EMC: New Day 23
23:00:00:03.250 EMC: Resynchronizing to Flare time: 1987291125 ms; timestamp adjusted to: 0 ms.
24:00:00:00.139 EMC: New Day 24
24:00:00:00.244 EMC: Resynchronizing to Flare time: 2073689687 ms; timestamp adjusted to: 0 ms.
25:00:00:00.047 EMC: New Day 25
25:00:00:01.809 EMC: Resynchronizing to Flare time: 2160091562 ms; timestamp adjusted to: 0 ms.
26:00:00:00.262 EMC: New Day 26
26:00:00:00.897 EMC: Resynchronizing to Flare time: 2246490156 ms; timestamp adjusted to: 0 ms.
27:00:00:00.132 EMC: New Day 27
27:00:00:00.465 EMC: Resynchronizing to Flare time: 2332888750 ms; timestamp adjusted to: 0 ms.
28:00:00:00.486 EMC: New Day 28
28:00:00:02.978 EMC: Resynchronizing to Flare time: 2419290625 ms; timestamp adjusted to: 0 ms.
29:00:00:00.217 EMC: New Day 29
29:00:00:00.337 EMC: Resynchronizing to Flare time: 2505689250 ms; timestamp adjusted to: 0 ms.
30:00:00:00.281 EMC: New Day 30
30:00:00:01.640 EMC: Resynchronizing to Flare time: 2592091093 ms; timestamp adjusted to: 0 ms.
31:00:00:00.018 EMC: New Day 31
31:00:00:00.097 EMC: Resynchronizing to Flare time: 2678489687 ms; timestamp adjusted to: 0 ms.
32:00:00:00.146 EMC: New Day 32
32:00:00:02.518 EMC: Year 2011, Month 9
32:00:00:02.539 EMC: Resynchronizing to Flare time: 86491562 ms; timestamp adjusted to: 0 ms.
02:00:00:00.060 EMC: New Day 2
02:00:00:01.971 EMC: Resynchronizing to Flare time: 172890156 ms; timestamp adjusted to: 0 ms.
02:06:50:05.110 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
02:06:50:05.134 EMC: DISPLAY command success, encl number=01, mode=4.
02:06:50:05.442 Setting CPLD activity LED mode to OR because both sides not being polled.
02:06:50:08.037 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
02:06:50:08.050 EMC: DISPLAY command success, encl number=01, mode=4.
02:06:50:08.360 Setting CPLD activity LED mode to AND because both sides being polled.
03:00:00:00.291 EMC: New Day 3
03:00:00:00.871 EMC: Resynchronizing to Flare time: 259288750 ms; timestamp adjusted to: 0 ms.
04:00:00:00.072 EMC: New Day 4
04:00:00:01.737 EMC: Resynchronizing to Flare time: 345690625 ms; timestamp adjusted to: 0 ms.
05:00:00:00.076 EMC: New Day 5
05:00:00:02.970 EMC: Resynchronizing to Flare time: 432092500 ms; timestamp adjusted to: 0 ms.
06:00:00:00.126 EMC: New Day 6
06:00:00:01.550 EMC: Resynchronizing to Flare time: 518491093 ms; timestamp adjusted to: 0 ms.
07:00:00:00.234 EMC: New Day 7
07:00:00:01.150 EMC: Resynchronizing to Flare time: 604889687 ms; timestamp adjusted to: 0 ms.
08:00:00:00.823 EMC: New Day 8
08:00:00:03.576 EMC: Resynchronizing to Flare time: 691291562 ms; timestamp adjusted to: 0 ms.
09:00:00:00.179 EMC: New Day 9
09:00:00:01.646 EMC: Resynchronizing to Flare time: 777690156 ms; timestamp adjusted to: 0 ms.
10:00:00:00.119 EMC: New Day 10
10:00:00:02.298 EMC: Resynchronizing to Flare time: 864092046 ms; timestamp adjusted to: 0 ms.
11:00:00:00.145 EMC: New Day 11
11:00:00:01.103 EMC: Resynchronizing to Flare time: 950490625 ms; timestamp adjusted to: 0 ms.
11:16:38:08.616 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
11:16:38:08.623 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
11:16:38:08.630 Setting CPLD activity LED mode to OR because both sides not being polled.
11:16:38:08.640 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
11:16:38:08.662 EMC: DISPLAY command success, encl number=01, mode=C.
11:16:38:08.709 EMC: Sending changed local info to peer.
11:16:38:11.894 EMC: Flare polling state restored because good generation number 0x2306 received.
11:16:38:11.903 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
11:16:38:11.910 Setting CPLD activity LED mode to AND because both sides being polled.
11:16:38:11.918 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
11:16:38:11.921 EMC: Sending changed local info to peer.
11:16:38:11.939 EMC: DISPLAY command success, encl number=01, mode=4.
11:16:38:11.982 EMC: Resynchronizing to Flare time: 1010353750 ms; timestamp adjusted to: 0 ms.
12:00:00:00.614 EMC: New Day 12
12:00:00:02.988 EMC: Resynchronizing to Flare time: 1036830156 ms; timestamp adjusted to: 0 ms.
13:00:00:00.274 EMC: New Day 13
13:00:00:03.023 EMC: Resynchronizing to Flare time: 1123291093 ms; timestamp adjusted to: 0 ms.
14:00:00:00.068 EMC: New Day 14
14:00:00:01.707 EMC: Resynchronizing to Flare time: 1209689687 ms; timestamp adjusted to: 0 ms.
15:00:00:00.134 EMC: New Day 15
15:00:00:02.600 EMC: Resynchronizing to Flare time: 1296091593 ms; timestamp adjusted to: 0 ms.
15:07:31:34.454 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
15:07:31:34.462 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
15:07:31:34.469 Setting CPLD activity LED mode to OR because both sides not being polled.
15:07:31:34.478 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
15:07:31:34.500 EMC: DISPLAY command success, encl number=01, mode=C.
15:07:31:34.546 EMC: Sending changed local info to peer.
15:07:31:37.733 EMC: Flare polling state restored because good generation number 0x2306 received.
15:07:31:37.741 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
15:07:31:37.748 Setting CPLD activity LED mode to AND because both sides being polled.
15:07:31:37.756 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
15:07:31:37.790 EMC: DISPLAY command success, encl number=01, mode=4.
15:07:31:37.810 EMC: Sending changed local info to peer.
15:07:31:37.824 EMC: Resynchronizing to Flare time: 1323125781 ms; timestamp adjusted to: 0 ms.
16:00:00:00.114 EMC: New Day 16
16:00:00:02.197 EMC: Resynchronizing to Flare time: 1382463906 ms; timestamp adjusted to: 0 ms.
17:00:00:00.252 EMC: New Day 17
17:00:00:02.997 EMC: Resynchronizing to Flare time: 1468892031 ms; timestamp adjusted to: 0 ms.
18:00:00:00.731 EMC: New Day 18
18:00:00:01.959 EMC: Resynchronizing to Flare time: 1555290625 ms; timestamp adjusted to: 0 ms.
19:00:00:00.105 EMC: New Day 19
19:00:00:01.478 EMC: Resynchronizing to Flare time: 1641689250 ms; timestamp adjusted to: 0 ms.
19:04:58:47.718 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
19:04:58:47.725 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
19:04:58:47.732 Setting CPLD activity LED mode to OR because both sides not being polled.
19:04:58:47.741 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
19:04:58:47.764 EMC: DISPLAY command success, encl number=01, mode=C.
19:04:58:47.809 EMC: Sending changed local info to peer.
19:04:58:48.712 EMC: ...read processing took 0 ms, status=Success
19:04:58:50.997 EMC: Flare polling state restored because good generation number 0x2306 received.
19:04:58:51.005 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
19:04:58:51.014 Setting CPLD activity LED mode to AND because both sides being polled.
19:04:58:51.021 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
19:04:58:51.045 EMC: DISPLAY command success, encl number=01, mode=4.
19:04:58:51.067 EMC: Resynchronizing to Flare time: 1659549062 ms; timestamp adjusted to: 0 ms.
19:04:59:09.335 EMC: Sending changed local info to peer.
20:00:00:00.216 EMC: New Day 20
20:00:00:01.287 EMC: Resynchronizing to Flare time: 1728071406 ms; timestamp adjusted to: 0 ms.
21:00:00:00.024 EMC: New Day 21
21:00:00:00.586 EMC: Resynchronizing to Flare time: 1814489687 ms; timestamp adjusted to: 0 ms.
21:16:32:19.583 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
21:16:32:19.607 EMC: DISPLAY command success, encl number=01, mode=4.
21:16:32:19.918 Setting CPLD activity LED mode to OR because both sides not being polled.
21:16:32:22.489 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
21:16:32:22.514 EMC: DISPLAY command success, encl number=01, mode=4.
21:16:32:22.519 EMC: ...read processing took 31 ms, status=Success
21:16:32:23.504 Setting CPLD activity LED mode to AND because both sides being polled.
22:00:00:00.049 EMC: New Day 22
22:00:00:01.761 EMC: Resynchronizing to Flare time: 1900891562 ms; timestamp adjusted to: 0 ms.
22:11:46:03.285 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
22:11:46:03.310 EMC: DISPLAY command success, encl number=01, mode=4.
22:11:46:03.621 Setting CPLD activity LED mode to OR because both sides not being polled.
22:11:46:06.502 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
22:11:46:06.514 EMC: DISPLAY command success, encl number=01, mode=4.
22:11:46:06.826 Setting CPLD activity LED mode to AND because both sides being polled.
23:00:00:00.066 EMC: New Day 23
23:00:00:00.509 EMC: Resynchronizing to Flare time: 1987290156 ms; timestamp adjusted to: 0 ms.
24:00:00:00.017 EMC: New Day 24
24:00:00:00.220 EMC: Resynchronizing to Flare time: 2073688750 ms; timestamp adjusted to: 0 ms.
25:00:00:00.189 EMC: New Day 25
25:00:00:02.492 EMC: Resynchronizing to Flare time: 2160090625 ms; timestamp adjusted to: 0 ms.
26:00:00:00.044 EMC: New Day 26
26:00:00:01.083 EMC: Resynchronizing to Flare time: 2246489218 ms; timestamp adjusted to: 0 ms.
                                                                                                                                                                 

Buffer Type: SXP Trace
Buffer Id: 0
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 49th at 17:03:03.
00:00:00:01:265 EMC: Setting Update lock: 1
00:00:00:01:399 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:420 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:440 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:460 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:482 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:502 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:507 EMC: Failed to get Power Supply revision info.
00:00:00:01:514 EMC: SXP FW Version:   04.05
00:00:00:01:518 EMC: SXP BOOT Version: 03.00
00:00:00:01:522 EMC: SXP ISTR Version: 03.05
00:00:00:01:526 EMC: MC Version:       16.01
00:00:00:01:531 EMC: DLMC Version:     14.47
00:00:00:01:535 EMC: PS Version:       00.01
00:00:00:01:539 EMC: CPLD Version:     00.09
00:00:00:01:543 EMC: Base SAS Address: 50060480_00b680c0
00:00:00:01:548 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:557 EMC: Exception flag read from register is 0
00:00:00:00:985 EMC: Setting enclosure number to 255
00:00:00:01:005 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:01:026 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:049 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:069 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:090 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:112 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:119 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:142 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:165 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:185 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:239 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:259 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:265 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:287 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:308 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:330 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:350 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:370 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:375 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:383 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:01:389 EMC: Checking for updated FW!
00:00:00:01:393 EMC: Checking for SXP FW download
00:00:00:01:420 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:01:435 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:01:440 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:15:669 WDG EXPIRED: Elapsed time since last WDG run: 799 ms
00:00:00:15:674 WDG: Pong not received from: EMA
                                              

Buffer Type: SXP Trace
Buffer Id: 1
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 946
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:15.7
00:00:00:01:264 EMC: Setting Update lock: 1
00:00:00:01:350 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:384 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:404 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:424 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:445 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:467 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:472 EMC: Failed to get Power Supply revision info.
00:00:00:01:478 EMC: SXP FW Version:   04.05
00:00:00:01:483 EMC: SXP BOOT Version: 03.00
00:00:00:01:487 EMC: SXP ISTR Version: 03.05
00:00:00:01:491 EMC: MC Version:       16.01
00:00:00:01:497 EMC: DLMC Version:     14.47
00:00:00:01:501 EMC: PS Version:       00.01
00:00:00:01:505 EMC: CPLD Version:     00.13
00:00:00:15:768 WDG EXPIRED: Elapsed time since last WDG run: 229 ms
00:00:00:15:773 WDG: Pong not received from: EMA
                 

Buffer Type: SXP Trace
Buffer Id: 2
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:51.
00:00:00:01:263 EMC: Setting Update lock: 1
00:00:00:01:349 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:382 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:402 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:423 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:443 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:465 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:470 EMC: Failed to get Power Supply revision info.
00:00:00:01:476 EMC: SXP FW Version:   04.05
00:00:00:01:481 EMC: SXP BOOT Version: 03.00
00:00:00:01:485 EMC: SXP ISTR Version: 03.05
00:00:00:01:489 EMC: MC Version:       16.01
00:00:00:01:493 EMC: DLMC Version:     14.47
00:00:00:01:498 EMC: PS Version:       00.01
00:00:00:01:502 EMC: CPLD Version:     00.13
00:00:00:01:506 EMC: Base SAS Address: 50060480_00fa80c0
00:00:00:01:510 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:520 EMC: Exception flag read from register is 1
00:00:00:36:984 EMC: Setting enclosure number to 255
00:00:00:37:003 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:37:046 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:068 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:089 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:109 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:130 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:136 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:160 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:183 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:204 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:225 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:269 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:274 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:298 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:321 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:342 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:363 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:385 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:390 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:397 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:37:404 EMC: Checking for updated FW!
00:00:00:37:408 EMC: Checking for SXP FW download
00:00:00:37:436 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:37:451 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:37:456 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:51:683 WDG EXPIRED: Elapsed time since last WDG run: 792 ms
00:00:00:51:688 WDG: Pong not received from: EMA
                                              

Buffer Type: Expander Ring Buffer Trace
Buffer Id: 255
Source: Manual
SXP Major Rev: 04
SXP Minor Rev: 30
Length: -1
Timestamp: 10/18/2011 16:42:25
        
21:16:32:22.514 EMC: DISPLAY command success, encl number=01, mode=4.
21:16:32:22.519 EMC: ...read processing took 31 ms, status=Success
21:16:32:23.504 Setting CPLD activity LED mode to AND because both sides being polled.
22:00:00:00.049 EMC: New Day 22
22:00:00:01.761 EMC: Resynchronizing to Flare time: 1900891562 ms; timestamp adjusted to: 0 ms.
22:11:46:03.285 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
22:11:46:03.310 EMC: DISPLAY command success, encl number=01, mode=4.
22:11:46:03.621 Setting CPLD activity LED mode to OR because both sides not being polled.
22:11:46:06.502 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
22:11:46:06.514 EMC: DISPLAY command success, encl number=01, mode=4.
22:11:46:06.826 Setting CPLD activity LED mode to AND because both sides being polled.
23:00:00:00.066 EMC: New Day 23
23:00:00:00.509 EMC: Resynchronizing to Flare time: 1987290156 ms; timestamp adjusted to: 0 ms.
24:00:00:00.017 EMC: New Day 24
24:00:00:00.220 EMC: Resynchronizing to Flare time: 2073688750 ms; timestamp adjusted to: 0 ms.
25:00:00:00.189 EMC: New Day 25
25:00:00:02.492 EMC: Resynchronizing to Flare time: 2160090625 ms; timestamp adjusted to: 0 ms.
26:00:00:00.044 EMC: New Day 26
26:00:00:01.083 EMC: Resynchronizing to Flare time: 2246489218 ms; timestamp adjusted to: 0 ms.
27:00:00:00.075 EMC: New Day 27
27:00:00:01.651 EMC: Resynchronizing to Flare time: 2332891109 ms; timestamp adjusted to: 0 ms.
27:10:29:40.258 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
27:10:29:40.281 EMC: DISPLAY command success, encl number=01, mode=4.
27:10:29:40.286 EMC: ...read processing took 29 ms, status=Success
27:10:29:41.269 Setting CPLD activity LED mode to OR because both sides not being polled.
27:10:29:43.500 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
27:10:29:43.523 EMC: DISPLAY command success, encl number=01, mode=4.
27:10:29:43.829 Setting CPLD activity LED mode to AND because both sides being polled.
28:00:00:00.178 EMC: New Day 28
28:00:00:02.875 EMC: Resynchronizing to Flare time: 2419293000 ms; timestamp adjusted to: 0 ms.
29:00:00:00.656 EMC: New Day 29
29:00:00:02.347 EMC: Resynchronizing to Flare time: 2505691562 ms; timestamp adjusted to: 0 ms.
30:00:00:00.219 EMC: New Day 30
30:00:00:01.961 EMC: Resynchronizing to Flare time: 2592090156 ms; timestamp adjusted to: 0 ms.
31:00:00:00.018 EMC: New Day 31
31:00:00:00.737 EMC: Year 2011, Month 10
31:00:00:00.757 EMC: Resynchronizing to Flare time: 86488750 ms; timestamp adjusted to: 0 ms.
02:00:00:00.062 EMC: New Day 2
02:00:00:01.707 EMC: Resynchronizing to Flare time: 172890625 ms; timestamp adjusted to: 0 ms.
03:00:00:00.236 EMC: New Day 3
03:00:00:02.749 EMC: Resynchronizing to Flare time: 259292500 ms; timestamp adjusted to: 0 ms.
04:00:00:00.066 EMC: New Day 4
04:00:00:01.450 EMC: Resynchronizing to Flare time: 345691093 ms; timestamp adjusted to: 0 ms.
04:20:55:11.759 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
04:20:55:11.767 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
04:20:55:11.774 Setting CPLD activity LED mode to OR because both sides not being polled.
04:20:55:11.783 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
04:20:55:11.805 EMC: DISPLAY command success, encl number=01, mode=C.
04:20:55:11.851 EMC: Sending changed local info to peer.
04:20:55:15.037 EMC: Flare polling state restored because good generation number 0x2306 received.
04:20:55:15.046 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
04:20:55:15.053 Setting CPLD activity LED mode to AND because both sides being polled.
04:20:55:15.061 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
04:20:55:15.084 EMC: DISPLAY command success, encl number=01, mode=4.
04:20:55:15.108 EMC: Resynchronizing to Flare time: 420992500 ms; timestamp adjusted to: 0 ms.
04:20:56:32.757 EMC: Sending changed local info to peer.
05:00:00:00.182 EMC: New Day 5
05:00:00:02.884 EMC: Resynchronizing to Flare time: 432014218 ms; timestamp adjusted to: 0 ms.
05:19:20:32.668 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
05:19:20:32.692 EMC: DISPLAY command success, encl number=01, mode=4.
05:19:20:33.000 Setting CPLD activity LED mode to OR because both sides not being polled.
05:19:20:35.884 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
05:19:20:35.907 EMC: DISPLAY command success, encl number=01, mode=4.
05:19:20:36.206 Setting CPLD activity LED mode to AND because both sides being polled.
06:00:00:00.105 EMC: New Day 6
06:00:00:00.387 EMC: Resynchronizing to Flare time: 518488281 ms; timestamp adjusted to: 0 ms.
06:20:44:00.790 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
06:20:44:00.796 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
06:20:44:00.804 Setting CPLD activity LED mode to OR because both sides not being polled.
06:20:44:00.813 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:20:44:00.837 EMC: DISPLAY command success, encl number=01, mode=C.
06:20:44:00.879 EMC: Sending changed local info to peer.
06:20:44:04.066 EMC: Flare polling state restored because good generation number 0x2306 received.
06:20:44:04.074 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
06:20:44:04.083 Setting CPLD activity LED mode to AND because both sides being polled.
06:20:44:04.090 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:20:44:04.114 EMC: DISPLAY command success, encl number=01, mode=4.
06:20:44:04.149 EMC: Resynchronizing to Flare time: 593120312 ms; timestamp adjusted to: 0 ms.
06:20:45:20.382 EMC: Sending changed local info to peer.
07:00:00:00.768 EMC: New Day 7
07:00:00:02.669 EMC: Resynchronizing to Flare time: 604814687 ms; timestamp adjusted to: 0 ms.
08:00:00:00.110 EMC: New Day 8
08:00:00:02.426 EMC: Resynchronizing to Flare time: 691292062 ms; timestamp adjusted to: 0 ms.
09:00:00:00.232 EMC: New Day 9
09:00:00:00.711 EMC: Resynchronizing to Flare time: 777690625 ms; timestamp adjusted to: 0 ms.
10:00:00:00.078 EMC: New Day 10
10:00:00:03.273 EMC: Resynchronizing to Flare time: 864092500 ms; timestamp adjusted to: 0 ms.
11:00:00:00.021 EMC: New Day 11
11:00:00:02.820 EMC: Resynchronizing to Flare time: 950491093 ms; timestamp adjusted to: 0 ms.
11:08:46:37.225 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
11:08:46:37.248 EMC: DISPLAY command success, encl number=01, mode=4.
11:08:46:37.547 Setting CPLD activity LED mode to OR because both sides not being polled.
11:08:46:39.172 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
11:08:46:39.194 EMC: DISPLAY command success, encl number=01, mode=4.
11:08:46:39.501 Setting CPLD activity LED mode to AND because both sides being polled.
12:00:00:00.052 EMC: New Day 12
12:00:00:01.849 EMC: Resynchronizing to Flare time: 1036889687 ms; timestamp adjusted to: 0 ms.
12:02:29:00.201 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
12:02:29:00.208 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
12:02:29:00.215 Setting CPLD activity LED mode to OR because both sides not being polled.
12:02:29:00.224 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
12:02:29:00.246 EMC: DISPLAY command success, encl number=01, mode=C.
12:02:29:00.293 EMC: Sending changed local info to peer.
12:02:29:03.478 EMC: Flare polling state restored because good generation number 0x2306 received.
12:02:29:03.486 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
12:02:29:03.493 Setting CPLD activity LED mode to AND because both sides being polled.
12:02:29:03.501 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
12:02:29:03.532 EMC: Sending changed local info to peer.
12:02:29:03.542 EMC: DISPLAY command success, encl number=01, mode=4.
12:02:29:03.586 EMC: Resynchronizing to Flare time: 1045752343 ms; timestamp adjusted to: 0 ms.
13:00:00:00.043 EMC: New Day 13
13:00:00:01.972 EMC: Resynchronizing to Flare time: 1123281718 ms; timestamp adjusted to: 0 ms.
13:05:37:56.638 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
13:05:37:56.645 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
13:05:37:56.652 Setting CPLD activity LED mode to OR because both sides not being polled.
13:05:37:56.661 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
13:05:37:56.683 EMC: DISPLAY command success, encl number=01, mode=C.
13:05:37:56.729 EMC: Sending changed local info to peer.
13:05:37:59.915 EMC: Flare polling state restored because good generation number 0x2306 received.
13:05:37:59.924 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
13:05:37:59.931 Setting CPLD activity LED mode to AND because both sides being polled.
13:05:37:59.939 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
13:05:37:59.968 EMC: Sending changed local info to peer.
13:05:37:59.979 EMC: DISPLAY command success, encl number=01, mode=4.
13:05:38:00.021 EMC: Resynchronizing to Flare time: 1143500781 ms; timestamp adjusted to: 0 ms.
13:19:27:02.312 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
13:19:27:02.324 EMC: DISPLAY command success, encl number=01, mode=4.
13:19:27:02.624 Setting CPLD activity LED mode to OR because both sides not being polled.
13:19:27:05.846 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
13:19:27:05.869 EMC: DISPLAY command success, encl number=01, mode=4.
13:19:27:06.175 Setting CPLD activity LED mode to AND because both sides being polled.
14:00:00:00.854 EMC: New Day 14
14:00:00:01.647 EMC: Resynchronizing to Flare time: 1209670468 ms; timestamp adjusted to: 0 ms.
15:00:00:00.305 EMC: New Day 15
15:00:00:02.379 EMC: Resynchronizing to Flare time: 1296092062 ms; timestamp adjusted to: 0 ms.
16:00:00:00.257 EMC: New Day 16
16:00:00:01.713 EMC: Resynchronizing to Flare time: 1382490625 ms; timestamp adjusted to: 0 ms.
16:22:18:08.608 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
16:22:18:08.633 EMC: DISPLAY command success, encl number=01, mode=4.
16:22:18:08.944 Setting CPLD activity LED mode to OR because both sides not being polled.
16:22:18:11.866 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
16:22:18:11.892 EMC: DISPLAY command success, encl number=01, mode=4.
16:22:18:12.203 Setting CPLD activity LED mode to AND because both sides being polled.
17:00:00:00.151 EMC: New Day 17
17:00:00:01.445 EMC: Resynchronizing to Flare time: 1468889250 ms; timestamp adjusted to: 0 ms.
18:00:00:00.425 EMC: New Day 18
18:00:00:02.727 EMC: Resynchronizing to Flare time: 1555291093 ms; timestamp adjusted to: 0 ms.
18:10:36:52.764 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
18:10:36:52.770 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
18:10:36:52.778 Setting CPLD activity LED mode to OR because both sides not being polled.
18:10:36:52.787 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
18:10:36:52.810 EMC: DISPLAY command success, encl number=01, mode=C.
18:10:36:52.853 EMC: Sending changed local info to peer.
18:10:36:56.042 EMC: Flare polling state restored because good generation number 0x2306 received.
18:10:36:56.050 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
18:10:36:56.057 Setting CPLD activity LED mode to AND because both sides being polled.
18:10:36:56.064 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
18:10:36:56.101 EMC: DISPLAY command success, encl number=01, mode=4.
18:10:36:56.121 EMC: Sending changed local info to peer.
18:10:36:56.135 EMC: Resynchronizing to Flare time: 1593455312 ms; timestamp adjusted to: 0 ms.
                                                                                                                                                                 

Buffer Type: SXP Trace
Buffer Id: 0
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 49th at 17:03:03.
00:00:00:01:265 EMC: Setting Update lock: 1
00:00:00:01:399 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:420 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:440 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:460 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:482 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:502 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:507 EMC: Failed to get Power Supply revision info.
00:00:00:01:514 EMC: SXP FW Version:   04.05
00:00:00:01:518 EMC: SXP BOOT Version: 03.00
00:00:00:01:522 EMC: SXP ISTR Version: 03.05
00:00:00:01:526 EMC: MC Version:       16.01
00:00:00:01:531 EMC: DLMC Version:     14.47
00:00:00:01:535 EMC: PS Version:       00.01
00:00:00:01:539 EMC: CPLD Version:     00.09
00:00:00:01:543 EMC: Base SAS Address: 50060480_00b680c0
00:00:00:01:548 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:557 EMC: Exception flag read from register is 0
00:00:00:00:985 EMC: Setting enclosure number to 255
00:00:00:01:005 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:01:026 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:049 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:069 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:090 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:112 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:119 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:142 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:165 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:185 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:239 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:259 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:265 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:287 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:308 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:330 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:350 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:370 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:375 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:383 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:01:389 EMC: Checking for updated FW!
00:00:00:01:393 EMC: Checking for SXP FW download
00:00:00:01:420 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:01:435 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:01:440 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:15:669 WDG EXPIRED: Elapsed time since last WDG run: 799 ms
00:00:00:15:674 WDG: Pong not received from: EMA
                                              

Buffer Type: SXP Trace
Buffer Id: 1
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 946
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:15.7
00:00:00:01:264 EMC: Setting Update lock: 1
00:00:00:01:350 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:384 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:404 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:424 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:445 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:467 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:472 EMC: Failed to get Power Supply revision info.
00:00:00:01:478 EMC: SXP FW Version:   04.05
00:00:00:01:483 EMC: SXP BOOT Version: 03.00
00:00:00:01:487 EMC: SXP ISTR Version: 03.05
00:00:00:01:491 EMC: MC Version:       16.01
00:00:00:01:497 EMC: DLMC Version:     14.47
00:00:00:01:501 EMC: PS Version:       00.01
00:00:00:01:505 EMC: CPLD Version:     00.13
00:00:00:15:768 WDG EXPIRED: Elapsed time since last WDG run: 229 ms
00:00:00:15:773 WDG: Pong not received from: EMA
                 

Buffer Type: SXP Trace
Buffer Id: 2
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:51.
00:00:00:01:263 EMC: Setting Update lock: 1
00:00:00:01:349 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:382 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:402 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:423 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:443 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:465 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:470 EMC: Failed to get Power Supply revision info.
00:00:00:01:476 EMC: SXP FW Version:   04.05
00:00:00:01:481 EMC: SXP BOOT Version: 03.00
00:00:00:01:485 EMC: SXP ISTR Version: 03.05
00:00:00:01:489 EMC: MC Version:       16.01
00:00:00:01:493 EMC: DLMC Version:     14.47
00:00:00:01:498 EMC: PS Version:       00.01
00:00:00:01:502 EMC: CPLD Version:     00.13
00:00:00:01:506 EMC: Base SAS Address: 50060480_00fa80c0
00:00:00:01:510 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:520 EMC: Exception flag read from register is 1
00:00:00:36:984 EMC: Setting enclosure number to 255
00:00:00:37:003 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:37:046 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:068 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:089 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:109 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:130 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:136 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:160 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:183 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:204 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:225 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:269 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:274 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:298 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:321 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:342 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:363 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:385 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:390 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:397 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:37:404 EMC: Checking for updated FW!
00:00:00:37:408 EMC: Checking for SXP FW download
00:00:00:37:436 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:37:451 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:37:456 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:51:683 WDG EXPIRED: Elapsed time since last WDG run: 792 ms
00:00:00:51:688 WDG: Pong not received from: EMA
                                              

Buffer Type: Expander Ring Buffer Trace
Buffer Id: 255
Source: Manual
SXP Major Rev: 04
SXP Minor Rev: 30
Length: -1
Timestamp: 10/27/2011 18:42:22
        
06:20:45:20.382 EMC: Sending changed local info to peer.
07:00:00:00.768 EMC: New Day 7
07:00:00:02.669 EMC: Resynchronizing to Flare time: 604814687 ms; timestamp adjusted to: 0 ms.
08:00:00:00.110 EMC: New Day 8
08:00:00:02.426 EMC: Resynchronizing to Flare time: 691292062 ms; timestamp adjusted to: 0 ms.
09:00:00:00.232 EMC: New Day 9
09:00:00:00.711 EMC: Resynchronizing to Flare time: 777690625 ms; timestamp adjusted to: 0 ms.
10:00:00:00.078 EMC: New Day 10
10:00:00:03.273 EMC: Resynchronizing to Flare time: 864092500 ms; timestamp adjusted to: 0 ms.
11:00:00:00.021 EMC: New Day 11
11:00:00:02.820 EMC: Resynchronizing to Flare time: 950491093 ms; timestamp adjusted to: 0 ms.
11:08:46:37.225 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
11:08:46:37.248 EMC: DISPLAY command success, encl number=01, mode=4.
11:08:46:37.547 Setting CPLD activity LED mode to OR because both sides not being polled.
11:08:46:39.172 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
11:08:46:39.194 EMC: DISPLAY command success, encl number=01, mode=4.
11:08:46:39.501 Setting CPLD activity LED mode to AND because both sides being polled.
12:00:00:00.052 EMC: New Day 12
12:00:00:01.849 EMC: Resynchronizing to Flare time: 1036889687 ms; timestamp adjusted to: 0 ms.
12:02:29:00.201 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
12:02:29:00.208 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
12:02:29:00.215 Setting CPLD activity LED mode to OR because both sides not being polled.
12:02:29:00.224 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
12:02:29:00.246 EMC: DISPLAY command success, encl number=01, mode=C.
12:02:29:00.293 EMC: Sending changed local info to peer.
12:02:29:03.478 EMC: Flare polling state restored because good generation number 0x2306 received.
12:02:29:03.486 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
12:02:29:03.493 Setting CPLD activity LED mode to AND because both sides being polled.
12:02:29:03.501 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
12:02:29:03.532 EMC: Sending changed local info to peer.
12:02:29:03.542 EMC: DISPLAY command success, encl number=01, mode=4.
12:02:29:03.586 EMC: Resynchronizing to Flare time: 1045752343 ms; timestamp adjusted to: 0 ms.
13:00:00:00.043 EMC: New Day 13
13:00:00:01.972 EMC: Resynchronizing to Flare time: 1123281718 ms; timestamp adjusted to: 0 ms.
13:05:37:56.638 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
13:05:37:56.645 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
13:05:37:56.652 Setting CPLD activity LED mode to OR because both sides not being polled.
13:05:37:56.661 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
13:05:37:56.683 EMC: DISPLAY command success, encl number=01, mode=C.
13:05:37:56.729 EMC: Sending changed local info to peer.
13:05:37:59.915 EMC: Flare polling state restored because good generation number 0x2306 received.
13:05:37:59.924 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
13:05:37:59.931 Setting CPLD activity LED mode to AND because both sides being polled.
13:05:37:59.939 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
13:05:37:59.968 EMC: Sending changed local info to peer.
13:05:37:59.979 EMC: DISPLAY command success, encl number=01, mode=4.
13:05:38:00.021 EMC: Resynchronizing to Flare time: 1143500781 ms; timestamp adjusted to: 0 ms.
13:19:27:02.312 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
13:19:27:02.324 EMC: DISPLAY command success, encl number=01, mode=4.
13:19:27:02.624 Setting CPLD activity LED mode to OR because both sides not being polled.
13:19:27:05.846 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
13:19:27:05.869 EMC: DISPLAY command success, encl number=01, mode=4.
13:19:27:06.175 Setting CPLD activity LED mode to AND because both sides being polled.
14:00:00:00.854 EMC: New Day 14
14:00:00:01.647 EMC: Resynchronizing to Flare time: 1209670468 ms; timestamp adjusted to: 0 ms.
15:00:00:00.305 EMC: New Day 15
15:00:00:02.379 EMC: Resynchronizing to Flare time: 1296092062 ms; timestamp adjusted to: 0 ms.
16:00:00:00.257 EMC: New Day 16
16:00:00:01.713 EMC: Resynchronizing to Flare time: 1382490625 ms; timestamp adjusted to: 0 ms.
16:22:18:08.608 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
16:22:18:08.633 EMC: DISPLAY command success, encl number=01, mode=4.
16:22:18:08.944 Setting CPLD activity LED mode to OR because both sides not being polled.
16:22:18:11.866 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
16:22:18:11.892 EMC: DISPLAY command success, encl number=01, mode=4.
16:22:18:12.203 Setting CPLD activity LED mode to AND because both sides being polled.
17:00:00:00.151 EMC: New Day 17
17:00:00:01.445 EMC: Resynchronizing to Flare time: 1468889250 ms; timestamp adjusted to: 0 ms.
18:00:00:00.425 EMC: New Day 18
18:00:00:02.727 EMC: Resynchronizing to Flare time: 1555291093 ms; timestamp adjusted to: 0 ms.
18:10:36:52.764 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
18:10:36:52.770 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
18:10:36:52.778 Setting CPLD activity LED mode to OR because both sides not being polled.
18:10:36:52.787 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
18:10:36:52.810 EMC: DISPLAY command success, encl number=01, mode=C.
18:10:36:52.853 EMC: Sending changed local info to peer.
18:10:36:56.042 EMC: Flare polling state restored because good generation number 0x2306 received.
18:10:36:56.050 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
18:10:36:56.057 Setting CPLD activity LED mode to AND because both sides being polled.
18:10:36:56.064 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
18:10:36:56.101 EMC: DISPLAY command success, encl number=01, mode=4.
18:10:36:56.121 EMC: Sending changed local info to peer.
18:10:36:56.135 EMC: Resynchronizing to Flare time: 1593455312 ms; timestamp adjusted to: 0 ms.
18:16:42:11.042 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
18:16:42:11.050 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
18:16:42:11.058 Setting CPLD activity LED mode to OR because both sides not being polled.
18:16:42:11.069 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
18:16:42:11.107 EMC: DISPLAY command success, encl number=01, mode=C.
18:16:42:11.221 EMC: Sending changed local info to peer.
18:16:42:15.882 EMC: Flare polling state restored because good generation number 0x2306 received.
18:16:42:15.890 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
18:16:42:15.898 Setting CPLD activity LED mode to AND because both sides being polled.
18:16:42:15.905 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
18:16:42:15.930 EMC: DISPLAY command success, encl number=01, mode=4.
18:16:42:15.952 EMC: Resynchronizing to Flare time: 1615354812 ms; timestamp adjusted to: 0 ms.
18:16:42:35.109 EMC: Sending changed local info to peer.
19:00:00:00.041 EMC: New Day 19
19:00:00:02.797 EMC: Resynchronizing to Flare time: 1641633906 ms; timestamp adjusted to: 0 ms.
19:03:33:40.748 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
19:03:33:40.754 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
19:03:33:40.762 Setting CPLD activity LED mode to OR because both sides not being polled.
19:03:33:40.771 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
19:03:33:40.794 EMC: DISPLAY command success, encl number=01, mode=C.
19:03:33:40.837 EMC: Sending changed local info to peer.
19:03:33:44.026 EMC: Flare polling state restored because good generation number 0x2306 received.
19:03:33:44.034 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
19:03:33:44.041 Setting CPLD activity LED mode to AND because both sides being polled.
19:03:33:44.049 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
19:03:33:44.072 EMC: DISPLAY command success, encl number=01, mode=4.
19:03:33:44.092 EMC: Sending changed local info to peer.
19:03:33:44.106 EMC: Resynchronizing to Flare time: 1654437343 ms; timestamp adjusted to: 0 ms.
20:00:00:00.003 EMC: New Day 20
20:00:00:01.749 EMC: Resynchronizing to Flare time: 1728078437 ms; timestamp adjusted to: 0 ms.
21:00:00:00.172 EMC: New Day 21
21:00:00:00.637 EMC: Resynchronizing to Flare time: 1814490156 ms; timestamp adjusted to: 0 ms.
22:00:00:00.024 EMC: New Day 22
22:00:00:00.099 EMC: Resynchronizing to Flare time: 1900888750 ms; timestamp adjusted to: 0 ms.
23:00:00:00.042 EMC: New Day 23
23:00:00:02.923 EMC: Resynchronizing to Flare time: 1987290625 ms; timestamp adjusted to: 0 ms.
23:01:12:33.705 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
23:01:12:33.728 EMC: DISPLAY command success, encl number=01, mode=4.
23:01:12:34.028 Setting CPLD activity LED mode to OR because both sides not being polled.
23:01:12:37.217 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
23:01:12:37.240 EMC: DISPLAY command success, encl number=01, mode=4.
23:01:12:37.546 Setting CPLD activity LED mode to AND because both sides being polled.
23:06:50:32.261 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
23:06:50:32.268 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
23:06:50:32.275 Setting CPLD activity LED mode to OR because both sides not being polled.
23:06:50:32.284 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
23:06:50:32.307 EMC: DISPLAY command success, encl number=01, mode=C.
23:06:50:32.354 EMC: Sending changed local info to peer.
23:06:50:33.564 EMC: ...read processing took 0 ms, status=Success
23:06:50:34.220 EMC: ...write took 651 ms, status=Success
23:06:50:35.536 EMC: Flare polling state restored because good generation number 0x2306 received.
23:06:50:35.545 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
23:06:50:35.552 Setting CPLD activity LED mode to AND because both sides being polled.
23:06:50:35.559 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
23:06:50:35.581 EMC: DISPLAY command success, encl number=01, mode=4.
23:06:50:35.604 EMC: Resynchronizing to Flare time: 2011860625 ms; timestamp adjusted to: 0 ms.
23:06:51:00.868 EMC: Sending changed local info to peer.
24:00:00:00.300 EMC: New Day 24
24:00:00:02.909 EMC: Resynchronizing to Flare time: 2073666250 ms; timestamp adjusted to: 0 ms.
25:00:00:00.298 EMC: New Day 25
25:00:00:01.532 EMC: Resynchronizing to Flare time: 2160091125 ms; timestamp adjusted to: 0 ms.
26:00:00:00.666 EMC: New Day 26
26:00:00:02.882 EMC: Resynchronizing to Flare time: 2246493000 ms; timestamp adjusted to: 0 ms.
26:09:18:40.771 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
26:09:18:40.778 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
26:09:18:40.785 Setting CPLD activity LED mode to OR because both sides not being polled.
26:09:18:40.795 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
26:09:18:40.817 EMC: DISPLAY command success, encl number=01, mode=C.
26:09:18:40.863 EMC: Sending changed local info to peer.
26:09:18:44.049 EMC: Flare polling state restored because good generation number 0x2306 received.
26:09:18:44.057 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
26:09:18:44.066 Setting CPLD activity LED mode to AND because both sides being polled.
26:09:18:44.073 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
26:09:18:44.098 EMC: DISPLAY command success, encl number=01, mode=4.
26:09:18:44.131 EMC: Resynchronizing to Flare time: 2279958437 ms; timestamp adjusted to: 0 ms.
26:09:19:18.505 EMC: Sending changed local info to peer.
27:00:00:00.109 EMC: New Day 27
27:00:00:00.965 EMC: Resynchronizing to Flare time: 2332855468 ms; timestamp adjusted to: 0 ms.
                                                                                                                                                                 

Buffer Type: SXP Trace
Buffer Id: 0
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 49th at 17:03:03.
00:00:00:01:265 EMC: Setting Update lock: 1
00:00:00:01:399 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:420 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:440 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:460 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:482 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:502 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:507 EMC: Failed to get Power Supply revision info.
00:00:00:01:514 EMC: SXP FW Version:   04.05
00:00:00:01:518 EMC: SXP BOOT Version: 03.00
00:00:00:01:522 EMC: SXP ISTR Version: 03.05
00:00:00:01:526 EMC: MC Version:       16.01
00:00:00:01:531 EMC: DLMC Version:     14.47
00:00:00:01:535 EMC: PS Version:       00.01
00:00:00:01:539 EMC: CPLD Version:     00.09
00:00:00:01:543 EMC: Base SAS Address: 50060480_00b680c0
00:00:00:01:548 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:557 EMC: Exception flag read from register is 0
00:00:00:00:985 EMC: Setting enclosure number to 255
00:00:00:01:005 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:01:026 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:049 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:069 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:090 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:112 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:119 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:142 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:165 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:185 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:239 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:259 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:265 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:287 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:308 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:330 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:350 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:370 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:375 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:383 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:01:389 EMC: Checking for updated FW!
00:00:00:01:393 EMC: Checking for SXP FW download
00:00:00:01:420 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:01:435 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:01:440 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:15:669 WDG EXPIRED: Elapsed time since last WDG run: 799 ms
00:00:00:15:674 WDG: Pong not received from: EMA
                                              

Buffer Type: SXP Trace
Buffer Id: 1
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 946
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:15.7
00:00:00:01:264 EMC: Setting Update lock: 1
00:00:00:01:350 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:384 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:404 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:424 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:445 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:467 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:472 EMC: Failed to get Power Supply revision info.
00:00:00:01:478 EMC: SXP FW Version:   04.05
00:00:00:01:483 EMC: SXP BOOT Version: 03.00
00:00:00:01:487 EMC: SXP ISTR Version: 03.05
00:00:00:01:491 EMC: MC Version:       16.01
00:00:00:01:497 EMC: DLMC Version:     14.47
00:00:00:01:501 EMC: PS Version:       00.01
00:00:00:01:505 EMC: CPLD Version:     00.13
00:00:00:15:768 WDG EXPIRED: Elapsed time since last WDG run: 229 ms
00:00:00:15:773 WDG: Pong not received from: EMA
                 

Buffer Type: SXP Trace
Buffer Id: 2
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:51.
00:00:00:01:263 EMC: Setting Update lock: 1
00:00:00:01:349 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:382 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:402 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:423 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:443 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:465 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:470 EMC: Failed to get Power Supply revision info.
00:00:00:01:476 EMC: SXP FW Version:   04.05
00:00:00:01:481 EMC: SXP BOOT Version: 03.00
00:00:00:01:485 EMC: SXP ISTR Version: 03.05
00:00:00:01:489 EMC: MC Version:       16.01
00:00:00:01:493 EMC: DLMC Version:     14.47
00:00:00:01:498 EMC: PS Version:       00.01
00:00:00:01:502 EMC: CPLD Version:     00.13
00:00:00:01:506 EMC: Base SAS Address: 50060480_00fa80c0
00:00:00:01:510 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:520 EMC: Exception flag read from register is 1
00:00:00:36:984 EMC: Setting enclosure number to 255
00:00:00:37:003 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:37:046 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:068 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:089 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:109 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:130 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:136 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:160 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:183 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:204 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:225 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:269 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:274 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:298 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:321 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:342 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:363 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:385 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:390 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:397 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:37:404 EMC: Checking for updated FW!
00:00:00:37:408 EMC: Checking for SXP FW download
00:00:00:37:436 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:37:451 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:37:456 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:51:683 WDG EXPIRED: Elapsed time since last WDG run: 792 ms
00:00:00:51:688 WDG: Pong not received from: EMA
                                              

Buffer Type: Expander Ring Buffer Trace
Buffer Id: 255
Source: Manual
SXP Major Rev: 04
SXP Minor Rev: 30
Length: -1
Timestamp: 11/02/2011 23:42:25
        
11:08:46:37.547 Setting CPLD activity LED mode to OR because both sides not being polled.
11:08:46:39.172 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
11:08:46:39.194 EMC: DISPLAY command success, encl number=01, mode=4.
11:08:46:39.501 Setting CPLD activity LED mode to AND because both sides being polled.
12:00:00:00.052 EMC: New Day 12
12:00:00:01.849 EMC: Resynchronizing to Flare time: 1036889687 ms; timestamp adjusted to: 0 ms.
12:02:29:00.201 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
12:02:29:00.208 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
12:02:29:00.215 Setting CPLD activity LED mode to OR because both sides not being polled.
12:02:29:00.224 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
12:02:29:00.246 EMC: DISPLAY command success, encl number=01, mode=C.
12:02:29:00.293 EMC: Sending changed local info to peer.
12:02:29:03.478 EMC: Flare polling state restored because good generation number 0x2306 received.
12:02:29:03.486 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
12:02:29:03.493 Setting CPLD activity LED mode to AND because both sides being polled.
12:02:29:03.501 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
12:02:29:03.532 EMC: Sending changed local info to peer.
12:02:29:03.542 EMC: DISPLAY command success, encl number=01, mode=4.
12:02:29:03.586 EMC: Resynchronizing to Flare time: 1045752343 ms; timestamp adjusted to: 0 ms.
13:00:00:00.043 EMC: New Day 13
13:00:00:01.972 EMC: Resynchronizing to Flare time: 1123281718 ms; timestamp adjusted to: 0 ms.
13:05:37:56.638 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
13:05:37:56.645 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
13:05:37:56.652 Setting CPLD activity LED mode to OR because both sides not being polled.
13:05:37:56.661 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
13:05:37:56.683 EMC: DISPLAY command success, encl number=01, mode=C.
13:05:37:56.729 EMC: Sending changed local info to peer.
13:05:37:59.915 EMC: Flare polling state restored because good generation number 0x2306 received.
13:05:37:59.924 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
13:05:37:59.931 Setting CPLD activity LED mode to AND because both sides being polled.
13:05:37:59.939 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
13:05:37:59.968 EMC: Sending changed local info to peer.
13:05:37:59.979 EMC: DISPLAY command success, encl number=01, mode=4.
13:05:38:00.021 EMC: Resynchronizing to Flare time: 1143500781 ms; timestamp adjusted to: 0 ms.
13:19:27:02.312 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
13:19:27:02.324 EMC: DISPLAY command success, encl number=01, mode=4.
13:19:27:02.624 Setting CPLD activity LED mode to OR because both sides not being polled.
13:19:27:05.846 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
13:19:27:05.869 EMC: DISPLAY command success, encl number=01, mode=4.
13:19:27:06.175 Setting CPLD activity LED mode to AND because both sides being polled.
14:00:00:00.854 EMC: New Day 14
14:00:00:01.647 EMC: Resynchronizing to Flare time: 1209670468 ms; timestamp adjusted to: 0 ms.
15:00:00:00.305 EMC: New Day 15
15:00:00:02.379 EMC: Resynchronizing to Flare time: 1296092062 ms; timestamp adjusted to: 0 ms.
16:00:00:00.257 EMC: New Day 16
16:00:00:01.713 EMC: Resynchronizing to Flare time: 1382490625 ms; timestamp adjusted to: 0 ms.
16:22:18:08.608 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
16:22:18:08.633 EMC: DISPLAY command success, encl number=01, mode=4.
16:22:18:08.944 Setting CPLD activity LED mode to OR because both sides not being polled.
16:22:18:11.866 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
16:22:18:11.892 EMC: DISPLAY command success, encl number=01, mode=4.
16:22:18:12.203 Setting CPLD activity LED mode to AND because both sides being polled.
17:00:00:00.151 EMC: New Day 17
17:00:00:01.445 EMC: Resynchronizing to Flare time: 1468889250 ms; timestamp adjusted to: 0 ms.
18:00:00:00.425 EMC: New Day 18
18:00:00:02.727 EMC: Resynchronizing to Flare time: 1555291093 ms; timestamp adjusted to: 0 ms.
18:10:36:52.764 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
18:10:36:52.770 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
18:10:36:52.778 Setting CPLD activity LED mode to OR because both sides not being polled.
18:10:36:52.787 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
18:10:36:52.810 EMC: DISPLAY command success, encl number=01, mode=C.
18:10:36:52.853 EMC: Sending changed local info to peer.
18:10:36:56.042 EMC: Flare polling state restored because good generation number 0x2306 received.
18:10:36:56.050 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
18:10:36:56.057 Setting CPLD activity LED mode to AND because both sides being polled.
18:10:36:56.064 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
18:10:36:56.101 EMC: DISPLAY command success, encl number=01, mode=4.
18:10:36:56.121 EMC: Sending changed local info to peer.
18:10:36:56.135 EMC: Resynchronizing to Flare time: 1593455312 ms; timestamp adjusted to: 0 ms.
18:16:42:11.042 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
18:16:42:11.050 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
18:16:42:11.058 Setting CPLD activity LED mode to OR because both sides not being polled.
18:16:42:11.069 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
18:16:42:11.107 EMC: DISPLAY command success, encl number=01, mode=C.
18:16:42:11.221 EMC: Sending changed local info to peer.
18:16:42:15.882 EMC: Flare polling state restored because good generation number 0x2306 received.
18:16:42:15.890 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
18:16:42:15.898 Setting CPLD activity LED mode to AND because both sides being polled.
18:16:42:15.905 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
18:16:42:15.930 EMC: DISPLAY command success, encl number=01, mode=4.
18:16:42:15.952 EMC: Resynchronizing to Flare time: 1615354812 ms; timestamp adjusted to: 0 ms.
18:16:42:35.109 EMC: Sending changed local info to peer.
19:00:00:00.041 EMC: New Day 19
19:00:00:02.797 EMC: Resynchronizing to Flare time: 1641633906 ms; timestamp adjusted to: 0 ms.
19:03:33:40.748 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
19:03:33:40.754 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
19:03:33:40.762 Setting CPLD activity LED mode to OR because both sides not being polled.
19:03:33:40.771 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
19:03:33:40.794 EMC: DISPLAY command success, encl number=01, mode=C.
19:03:33:40.837 EMC: Sending changed local info to peer.
19:03:33:44.026 EMC: Flare polling state restored because good generation number 0x2306 received.
19:03:33:44.034 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
19:03:33:44.041 Setting CPLD activity LED mode to AND because both sides being polled.
19:03:33:44.049 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
19:03:33:44.072 EMC: DISPLAY command success, encl number=01, mode=4.
19:03:33:44.092 EMC: Sending changed local info to peer.
19:03:33:44.106 EMC: Resynchronizing to Flare time: 1654437343 ms; timestamp adjusted to: 0 ms.
20:00:00:00.003 EMC: New Day 20
20:00:00:01.749 EMC: Resynchronizing to Flare time: 1728078437 ms; timestamp adjusted to: 0 ms.
21:00:00:00.172 EMC: New Day 21
21:00:00:00.637 EMC: Resynchronizing to Flare time: 1814490156 ms; timestamp adjusted to: 0 ms.
22:00:00:00.024 EMC: New Day 22
22:00:00:00.099 EMC: Resynchronizing to Flare time: 1900888750 ms; timestamp adjusted to: 0 ms.
23:00:00:00.042 EMC: New Day 23
23:00:00:02.923 EMC: Resynchronizing to Flare time: 1987290625 ms; timestamp adjusted to: 0 ms.
23:01:12:33.705 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
23:01:12:33.728 EMC: DISPLAY command success, encl number=01, mode=4.
23:01:12:34.028 Setting CPLD activity LED mode to OR because both sides not being polled.
23:01:12:37.217 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
23:01:12:37.240 EMC: DISPLAY command success, encl number=01, mode=4.
23:01:12:37.546 Setting CPLD activity LED mode to AND because both sides being polled.
23:06:50:32.261 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
23:06:50:32.268 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
23:06:50:32.275 Setting CPLD activity LED mode to OR because both sides not being polled.
23:06:50:32.284 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
23:06:50:32.307 EMC: DISPLAY command success, encl number=01, mode=C.
23:06:50:32.354 EMC: Sending changed local info to peer.
23:06:50:33.564 EMC: ...read processing took 0 ms, status=Success
23:06:50:34.220 EMC: ...write took 651 ms, status=Success
23:06:50:35.536 EMC: Flare polling state restored because good generation number 0x2306 received.
23:06:50:35.545 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
23:06:50:35.552 Setting CPLD activity LED mode to AND because both sides being polled.
23:06:50:35.559 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
23:06:50:35.581 EMC: DISPLAY command success, encl number=01, mode=4.
23:06:50:35.604 EMC: Resynchronizing to Flare time: 2011860625 ms; timestamp adjusted to: 0 ms.
23:06:51:00.868 EMC: Sending changed local info to peer.
24:00:00:00.300 EMC: New Day 24
24:00:00:02.909 EMC: Resynchronizing to Flare time: 2073666250 ms; timestamp adjusted to: 0 ms.
25:00:00:00.298 EMC: New Day 25
25:00:00:01.532 EMC: Resynchronizing to Flare time: 2160091125 ms; timestamp adjusted to: 0 ms.
26:00:00:00.666 EMC: New Day 26
26:00:00:02.882 EMC: Resynchronizing to Flare time: 2246493000 ms; timestamp adjusted to: 0 ms.
26:09:18:40.771 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
26:09:18:40.778 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
26:09:18:40.785 Setting CPLD activity LED mode to OR because both sides not being polled.
26:09:18:40.795 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
26:09:18:40.817 EMC: DISPLAY command success, encl number=01, mode=C.
26:09:18:40.863 EMC: Sending changed local info to peer.
26:09:18:44.049 EMC: Flare polling state restored because good generation number 0x2306 received.
26:09:18:44.057 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
26:09:18:44.066 Setting CPLD activity LED mode to AND because both sides being polled.
26:09:18:44.073 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
26:09:18:44.098 EMC: DISPLAY command success, encl number=01, mode=4.
26:09:18:44.131 EMC: Resynchronizing to Flare time: 2279958437 ms; timestamp adjusted to: 0 ms.
26:09:19:18.505 EMC: Sending changed local info to peer.
27:00:00:00.109 EMC: New Day 27
27:00:00:00.965 EMC: Resynchronizing to Flare time: 2332855468 ms; timestamp adjusted to: 0 ms.
28:00:00:00.129 EMC: New Day 28
28:00:00:01.974 EMC: Resynchronizing to Flare time: 2419290156 ms; timestamp adjusted to: 0 ms.
29:00:00:00.163 EMC: New Day 29
29:00:00:00.664 EMC: Resynchronizing to Flare time: 2505688750 ms; timestamp adjusted to: 0 ms.
30:00:00:00.227 EMC: New Day 30
30:00:00:01.620 EMC: Resynchronizing to Flare time: 2592090625 ms; timestamp adjusted to: 0 ms.
31:00:00:00.162 EMC: New Day 31
31:00:00:02.759 EMC: Resynchronizing to Flare time: 2678492500 ms; timestamp adjusted to: 0 ms.
32:00:00:00.311 EMC: New Day 32
32:00:00:01.214 EMC: Year 2011, Month 11
32:00:00:01.237 EMC: Resynchronizing to Flare time: 86491093 ms; timestamp adjusted to: 0 ms.
02:00:00:00.000 EMC: New Day 2
02:00:00:00.915 EMC: Resynchronizing to Flare time: 172889687 ms; timestamp adjusted to: 0 ms.
                                                                                                                                                                 

Buffer Type: SXP Trace
Buffer Id: 0
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 49th at 17:03:03.
00:00:00:01:265 EMC: Setting Update lock: 1
00:00:00:01:399 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:420 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:440 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:460 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:482 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:502 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:507 EMC: Failed to get Power Supply revision info.
00:00:00:01:514 EMC: SXP FW Version:   04.05
00:00:00:01:518 EMC: SXP BOOT Version: 03.00
00:00:00:01:522 EMC: SXP ISTR Version: 03.05
00:00:00:01:526 EMC: MC Version:       16.01
00:00:00:01:531 EMC: DLMC Version:     14.47
00:00:00:01:535 EMC: PS Version:       00.01
00:00:00:01:539 EMC: CPLD Version:     00.09
00:00:00:01:543 EMC: Base SAS Address: 50060480_00b680c0
00:00:00:01:548 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:557 EMC: Exception flag read from register is 0
00:00:00:00:985 EMC: Setting enclosure number to 255
00:00:00:01:005 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:01:026 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:049 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:069 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:090 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:112 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:119 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:142 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:165 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:185 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:239 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:259 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:265 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:287 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:308 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:330 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:350 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:370 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:375 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:383 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:01:389 EMC: Checking for updated FW!
00:00:00:01:393 EMC: Checking for SXP FW download
00:00:00:01:420 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:01:435 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:01:440 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:15:669 WDG EXPIRED: Elapsed time since last WDG run: 799 ms
00:00:00:15:674 WDG: Pong not received from: EMA
                                              

Buffer Type: SXP Trace
Buffer Id: 1
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 946
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:15.7
00:00:00:01:264 EMC: Setting Update lock: 1
00:00:00:01:350 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:384 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:404 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:424 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:445 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:467 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:472 EMC: Failed to get Power Supply revision info.
00:00:00:01:478 EMC: SXP FW Version:   04.05
00:00:00:01:483 EMC: SXP BOOT Version: 03.00
00:00:00:01:487 EMC: SXP ISTR Version: 03.05
00:00:00:01:491 EMC: MC Version:       16.01
00:00:00:01:497 EMC: DLMC Version:     14.47
00:00:00:01:501 EMC: PS Version:       00.01
00:00:00:01:505 EMC: CPLD Version:     00.13
00:00:00:15:768 WDG EXPIRED: Elapsed time since last WDG run: 229 ms
00:00:00:15:773 WDG: Pong not received from: EMA
                 

Buffer Type: SXP Trace
Buffer Id: 2
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:51.
00:00:00:01:263 EMC: Setting Update lock: 1
00:00:00:01:349 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:382 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:402 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:423 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:443 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:465 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:470 EMC: Failed to get Power Supply revision info.
00:00:00:01:476 EMC: SXP FW Version:   04.05
00:00:00:01:481 EMC: SXP BOOT Version: 03.00
00:00:00:01:485 EMC: SXP ISTR Version: 03.05
00:00:00:01:489 EMC: MC Version:       16.01
00:00:00:01:493 EMC: DLMC Version:     14.47
00:00:00:01:498 EMC: PS Version:       00.01
00:00:00:01:502 EMC: CPLD Version:     00.13
00:00:00:01:506 EMC: Base SAS Address: 50060480_00fa80c0
00:00:00:01:510 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:520 EMC: Exception flag read from register is 1
00:00:00:36:984 EMC: Setting enclosure number to 255
00:00:00:37:003 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:37:046 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:068 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:089 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:109 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:130 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:136 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:160 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:183 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:204 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:225 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:269 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:274 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:298 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:321 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:342 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:363 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:385 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:390 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:397 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:37:404 EMC: Checking for updated FW!
00:00:00:37:408 EMC: Checking for SXP FW download
00:00:00:37:436 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:37:451 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:37:456 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:51:683 WDG EXPIRED: Elapsed time since last WDG run: 792 ms
00:00:00:51:688 WDG: Pong not received from: EMA
                                              

Buffer Type: Expander Ring Buffer Trace
Buffer Id: 255
Source: Manual
SXP Major Rev: 04
SXP Minor Rev: 30
Length: -1
Timestamp: 11/06/2011 07:25:12
        
00:00:00:04.992 EMC: Setting enclosure number to 255
00:00:00:05.014 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:05.043 EMC: Setting unique ID to 0x3176A04B
00:00:00:05.049 EMC: Checking for updated FW!
00:00:00:05.053 EMC: Checking for SXP FW download
00:00:00:05.081 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:05.095 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:05.100 EMC: Checking MAIN SXP FW revs: actual: 4.30 flash: 4.30
00:00:00:05.589 EMC: Checking for MC/DLMC FW download
00:00:00:05.626 EMC: MC IN FLASH: revs - actual: 16.3 flash: 65535.65535
00:00:00:05.631 EMC: Not doing DLMC/MC download because Flash image invalid.
00:00:00:05.639 EMC: Getting Power Supply revision info addr=0.
00:00:00:05.660 EMC: Checking PS rev for 0$
00:00:00:05.664 EMC:     actual: 01.02 flash: 65535.65535
00:00:00:05.668 EMC: Not doing PS download: crc check: 0 ver check: 0
00:00:00:05.675 EMC: Checking80$CPLD revs: actual: 13 flash: -1
00:00:00:05.681 EMC: Not doing CPLD download: crc check: 0 ver check: 0
00:00:00:05.786 EMC: Getting Power Supply revision info addr=0.
00:00:00:05.808 EMC: Setting Update lock: 0
00:00:00:05.863 EMC: ENCLOSURE status going from OK to FAULTED
00:00:00:05.868 EMC: PEER POWER STATE going from OFF to ON
00:00:00:05.873 EMC: PEER INSERTED status going from NOT INSERTED to INSERTED
00:00:00:05.880 EMC: PEER STATE going from OFF to BOOTING
00:00:00:05.884 EMC: POWER B faulted going from OK to FAULTED
00:00:00:05.891 EMC: POWER B AC power fail going from OK to FAULTED
00:00:00:05.896 EMC: Drive 0 phy status going from NOT READY to READY
00:00:00:05.903 EMC: Drive 1 phy status going from NOT READY to READY
00:00:00:05.910 EMC: Drive 2 phy status going from NOT READY to READY
00:00:00:05.917 EMC: Drive 3 phy status going from NOT READY to READY
00:00:00:05.924 EMC: Drive 4 phy status going from NOT READY to READY
00:00:00:05.930 EMC: Drive 5 phy status going from NOT READY to READY
00:00:00:05.937 EMC: Drive 6 phy status going from NOT READY to READY
00:00:00:05.942 EMC: Drive 7 phy status going from NOT READY to READY
00:00:00:05.949 EMC: Drive 8 phy status going from NOT READY to READY
00:00:00:05.956 EMC: Drive 9 phy status going from NOT READY to READY
00:00:00:05.962 EMC: Drive 10 phy status going from NOT READY to READY
00:00:00:05.969 EMC: Drive 11 phy status going from NOT READY to READY
00:00:00:05.975 EMC: Downstream cable phy 0 status going from NOT READY to READY
00:00:00:05.982 EMC: Downstream cable phy 1 status going from NOT READY to READY
00:00:00:05.989 EMC: Downstream cable phy 2 status going from NOT READY to READY
00:00:00:05.998 EMC: Downstream cable phy 3 status going from NOT READY to READY
00:00:00:06.005 EMC: DRIVE 0 TYPE going from SATA to SAS
00:00:00:06.009 EMC: DRIVE 1 TYPE going from SATA to SAS
00:00:00:06.014 EMC: DRIVE 2 TYPE going from SATA to SAS
00:00:00:06.019 EMC: DRIVE 3 TYPE going from SATA to SAS
00:00:00:06.024 EMC: DRIVE 4 TYPE going from SATA to SAS
00:00:00:06.029 EMC: DRIVE 5 TYPE going from SATA to SAS
00:00:00:06.034 EMC: DRIVE 6 TYPE going from SATA to SAS
00:00:00:06.039 EMC: DRIVE 7 TYPE going from SATA to SAS
00:00:00:06.044 EMC: DRIVE 8 TYPE going from SATA to SAS
00:00:00:06.050 EMC: DRIVE 9 TYPE going from SATA to SAS
00:00:00:06.055 EMC: DRIVE 10 TYPE going from SATA to SAS
00:00:00:06.060 EMC: DRIVE 11 TYPE going from SATA to SAS
00:00:00:06.066 EMC: DRIVE 0 INSERT going from NOT INSERTED to INSERTED
00:00:00:06.072 EMC: DRIVE 1 INSERT going from NOT INSERTED to INSERTED
00:00:00:06.079 EMC: DRIVE 2 INSERT going from NOT INSERTED to INSERTED
00:00:00:06.085 EMC: DRIVE 3 INSERT going from NOT INSERTED to INSERTED
00:00:00:06.091 EMC: DRIVE 4 INSERT going from NOT INSERTED to INSERTED
00:00:00:06.097 EMC: DRIVE 5 INSERT going from NOT INSERTED to INSERTED
00:00:00:06.103 EMC: DRIVE 6 INSERT going from NOT INSERTED to INSERTED
00:00:00:06.110 EMC: DRIVE 7 INSERT going from NOT INSERTED to INSERTED
00:00:00:06.116 EMC: DRIVE 8 INSERT going from NOT INSERTED to INSERTED
00:00:00:06.122 EMC: DRIVE 9 INSERT going from NOT INSERTED to INSERTED
00:00:00:06.128 EMC: DRIVE 10 INSERT going from NOT INSERTED to INSERTED
00:00:00:06.134 EMC: DRIVE 11 INSERT going from NOT INSERTED to INSERTED
00:00:00:06.141 EMC: MISC STATUS HW Type going from 0 to 1
00:00:00:06.147 EMC: Detected downstream addr chg NONE to 50060489_703b0c7f.
00:00:00:06.156 EMC: Detected peer downstream addr chg NONE to INVALID.
00:00:00:06.163 EMC: Detected peer upstream addr chg NONE to INVALID.
00:00:00:06.168 EMC: Detected peer SSP addr chg NONE to INVALID.
00:00:00:06.174 EMC: PEER SIDE going from UNSUPPORTED to SIDE A
00:00:00:06.179 EMC: LED updater changing Upstream Fault LED from NO_CHANGE to OFF
00:00:00:06.187 EMC: LED updater changing Downstream Fault LED from NO_CHANGE to OFF
00:00:00:06.193 EMC: LED updater changing Upstream Conn LED from NO_CHANGE to OFF
00:00:00:06.200 EMC: LED updater changing Downstream Conn LED from NO_CHANGE to OFF
00:00:00:06.208 EMC: Writing LED command to MC: "L55555555"
00:00:00:06.277 EMC: LED updater changing slot 0 fault LED from NO_CHANGE to OFF.
00:00:00:06.283 EMC: LED updater changing slot 1 fault LED from NO_CHANGE to OFF.
00:00:00:06.291 EMC: LED updater changing slot 2 fault LED from NO_CHANGE to OFF.
00:00:00:06.298 EMC: LED updater changing slot 3 fault LED from NO_CHANGE to OFF.
00:00:00:06.306 EMC: LED updater changing slot 4 fault LED from NO_CHANGE to OFF.
00:00:00:06.313 EMC: LED updater changing slot 5 fault LED from NO_CHANGE to OFF.
00:00:00:06.321 EMC: LED updater changing slot 6 fault LED from NO_CHANGE to OFF.
00:00:00:06.328 EMC: LED updater changing slot 7 fault LED from NO_CHANGE to OFF.
00:00:00:06.336 EMC: LED updater changing slot 8 fault LED from NO_CHANGE to OFF.
00:00:00:06.343 EMC: LED updater changing slot 9 fault LED from NO_CHANGE to OFF.
00:00:00:06.351 EMC: LED updater changing slot 10 fault LED from NO_CHANGE to OFF.
00:00:00:06.358 EMC: LED updater changing slot 11 fault LED from NO_CHANGE to OFF.
00:00:00:06.365 EMC: LED updater changing slot 12 fault LED from NO_CHANGE to OFF.
00:00:00:06.372 EMC: LED updater changing slot 13 fault LED from NO_CHANGE to OFF.
00:00:00:06.379 EMC: LED updater changing slot 14 fault LED from NO_CHANGE to OFF.
00:00:00:06.387 EMC: Sending changed local info to peer.
00:00:00:07.889 EMC: ...read processing took 0 ms, status=Success
00:00:00:08.542 EMC: ...write took 646 ms, status=Success
00:00:00:08.547 EMC: Force activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14
00:00:00:08.814 EMC: Downstream wide port: CONNECTED.
00:00:00:08.836 EMC: Detected local PS FAULT change FAULTED to OK.
00:00:00:08.841 EMC: Detected local PS AC FAIL change FAULTED to OK.
00:00:00:08.847 EMC: Setting downstream connectivity LED to ON because downstream connection found.
00:00:00:08.855 EMC: Expander requesting Downstream Conn LED change from OFF to ON
00:00:00:08.883 EMC: ENCLOSURE status going from FAULTED to OK
00:00:00:08.888 EMC: DOWNSTREAM PORT status going from UNCONNECTED to CONNECTED
00:00:00:08.895 EMC: POWER B faulted going from FAULTED to OK
00:00:00:08.900 EMC: POWER B AC power fail going from FAULTED to OK
00:00:00:08.908 EMC: Detected peer downstream addr chg INVALID to 50060489_703b0c3f.
00:00:00:08.915 EMC: Detected peer upstream addr chg INVALID to NONE.
00:00:00:08.924 EMC: Detected peer SSP addr chg INVALID to 50060489_703b18be.
00:00:00:08.931 EMC: LED updater changing Downstream Conn LED from OFF to ON
00:00:00:08.940 EMC: Writing LED command to MC: "L55955555"
00:00:00:09.009 EMC: Sending changed local info to peer.
00:00:00:09.678 EMC: Other READ PAGE change detected.
00:00:03:16.330 EMC: Upstream cable phy 0 status going from NOT READY to READY
00:00:03:16.339 EMC: Upstream cable phy 1 status going from NOT READY to READY
00:00:03:16.346 EMC: Upstream cable phy 2 status going from NOT READY to READY
00:00:03:16.355 EMC: Upstream cable phy 3 status going from NOT READY to READY
00:00:03:16.364 EMC: Detected upstream addr chg NONE to 50060489_703ecaff.
00:00:03:16.372 EMC: Sending changed local info to peer.
00:00:03:17.088 EMC: ...read processing took 0 ms, status=Success
00:00:03:18.025 EMC: Upstream wide port: CONNECTED.
00:00:03:18.047 EMC: Setting upstream connectivity LED to ON because upstream connection found.
00:00:03:18.055 EMC: Expander requesting Upstream Conn LED change from OFF to ON
00:00:03:18.082 EMC: UPSTREAM PORT status going from UNCONNECTED to CONNECTED
00:00:03:18.090 EMC: Detected peer upstream addr chg NONE to 50060489_703ecabf.
00:00:03:18.096 EMC: LED updater changing Upstream Conn LED from OFF to ON
00:00:03:18.105 EMC: Writing LED command to MC: "L55A55555"
00:00:03:18.174 EMC: Sending changed local info to peer.
00:00:03:19.100 EMC: ...read processing took 0 ms, status=Success
00:00:03:20.251 EMC: Other READ PAGE change detected.
00:00:04:47.723 EMC: Detected peer upstream addr chg 50060489_703ecabf to NONE.
00:00:04:48.947 EMC: Other READ PAGE change detected.
00:00:04:50.185 EMC: Detected peer upstream addr chg NONE to 50060489_703ecabf.
00:00:04:51.151 EMC: Other READ PAGE change detected.
00:00:05:33.982 EMC: Year 2011, Month 11
00:00:05:34.002 EMC: Resynchronizing to Flare time: 541542328 ms; timestamp adjusted to: 0 ms.
06:06:25:42.356 EMC: Clearing state change bit.
06:06:25:42.361 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:06:25:42.546 EMC: Setting enclosure number to 1
06:06:25:42.568 EMC: DISPLAY command success, encl number=01, mode=C.
06:06:25:42.573 EMC: Flare assigns this enclosure number = 255, generation number = 0x0502
06:06:25:42.581 EMC: Flare polling state change: self NO to YES, peer NO to NO
06:06:25:42.589 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:06:25:42.601 EMC: DISPLAY command success, encl number=01, mode=4.
06:06:25:42.727 EMC: Other READ PAGE change detected.
06:06:25:42.734 EMC: Sending changed local info to peer.
06:06:25:43.080 EMC: Setting state change bit.
06:06:25:46.296 EMC: Clearing state change bit.
06:06:25:46.301 EMC: Setting enclosure number to 1
06:06:25:46.316 EMC: DISPLAY command success, encl number=01, mode=4.
06:06:25:46.321 EMC: Flare assigns this enclosure number = 1, generation number = 0x0502
06:06:25:46.328 EMC: ...but already assigned!
06:06:25:46.515 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:06:26:10.687 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:06:26:13.125 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:06:26:15.609 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:06:26:18.046 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:06:26:20.515 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:06:26:58.243 EMC: Flare polling state change: self YES to YES, peer NO to YES
06:06:26:58.268 EMC: DISPLAY command success, encl number=01, mode=4.
06:06:26:58.574 Setting CPLD activity LED mode to AND because both sides being polled.
06:06:27:04.265 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
                                                                                                                                                                 

Buffer Type: SXP Trace
Buffer Id: 0
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 49th at 17:03:03.
00:00:00:01:265 EMC: Setting Update lock: 1
00:00:00:01:399 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:420 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:440 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:460 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:482 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:502 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:507 EMC: Failed to get Power Supply revision info.
00:00:00:01:514 EMC: SXP FW Version:   04.05
00:00:00:01:518 EMC: SXP BOOT Version: 03.00
00:00:00:01:522 EMC: SXP ISTR Version: 03.05
00:00:00:01:526 EMC: MC Version:       16.01
00:00:00:01:531 EMC: DLMC Version:     14.47
00:00:00:01:535 EMC: PS Version:       00.01
00:00:00:01:539 EMC: CPLD Version:     00.09
00:00:00:01:543 EMC: Base SAS Address: 50060480_00b680c0
00:00:00:01:548 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:557 EMC: Exception flag read from register is 0
00:00:00:00:985 EMC: Setting enclosure number to 255
00:00:00:01:005 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:01:026 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:049 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:069 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:090 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:112 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:119 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:142 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:165 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:185 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:239 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:259 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:265 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:287 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:308 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:330 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:350 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:370 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:375 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:383 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:01:389 EMC: Checking for updated FW!
00:00:00:01:393 EMC: Checking for SXP FW download
00:00:00:01:420 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:01:435 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:01:440 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:15:669 WDG EXPIRED: Elapsed time since last WDG run: 799 ms
00:00:00:15:674 WDG: Pong not received from: EMA
                                              

Buffer Type: SXP Trace
Buffer Id: 1
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 946
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:15.7
00:00:00:01:264 EMC: Setting Update lock: 1
00:00:00:01:350 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:384 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:404 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:424 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:445 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:467 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:472 EMC: Failed to get Power Supply revision info.
00:00:00:01:478 EMC: SXP FW Version:   04.05
00:00:00:01:483 EMC: SXP BOOT Version: 03.00
00:00:00:01:487 EMC: SXP ISTR Version: 03.05
00:00:00:01:491 EMC: MC Version:       16.01
00:00:00:01:497 EMC: DLMC Version:     14.47
00:00:00:01:501 EMC: PS Version:       00.01
00:00:00:01:505 EMC: CPLD Version:     00.13
00:00:00:15:768 WDG EXPIRED: Elapsed time since last WDG run: 229 ms
00:00:00:15:773 WDG: Pong not received from: EMA
                 

Buffer Type: SXP Trace
Buffer Id: 2
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:51.
00:00:00:01:263 EMC: Setting Update lock: 1
00:00:00:01:349 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:382 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:402 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:423 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:443 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:465 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:470 EMC: Failed to get Power Supply revision info.
00:00:00:01:476 EMC: SXP FW Version:   04.05
00:00:00:01:481 EMC: SXP BOOT Version: 03.00
00:00:00:01:485 EMC: SXP ISTR Version: 03.05
00:00:00:01:489 EMC: MC Version:       16.01
00:00:00:01:493 EMC: DLMC Version:     14.47
00:00:00:01:498 EMC: PS Version:       00.01
00:00:00:01:502 EMC: CPLD Version:     00.13
00:00:00:01:506 EMC: Base SAS Address: 50060480_00fa80c0
00:00:00:01:510 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:520 EMC: Exception flag read from register is 1
00:00:00:36:984 EMC: Setting enclosure number to 255
00:00:00:37:003 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:37:046 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:068 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:089 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:109 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:130 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:136 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:160 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:183 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:204 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:225 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:269 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:274 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:298 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:321 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:342 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:363 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:385 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:390 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:397 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:37:404 EMC: Checking for updated FW!
00:00:00:37:408 EMC: Checking for SXP FW download
00:00:00:37:436 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:37:451 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:37:456 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:51:683 WDG EXPIRED: Elapsed time since last WDG run: 792 ms
00:00:00:51:688 WDG: Pong not received from: EMA
                                              

Buffer Type: Expander Ring Buffer Trace
Buffer Id: 255
Source: Manual
SXP Major Rev: 04
SXP Minor Rev: 30
Length: -1
Timestamp: 11/06/2011 11:13:34
        
00:00:00:05.095 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:05.100 EMC: Checking MAIN SXP FW revs: actual: 4.30 flash: 4.30
00:00:00:05.589 EMC: Checking for MC/DLMC FW download
00:00:00:05.626 EMC: MC IN FLASH: revs - actual: 16.3 flash: 65535.65535
00:00:00:05.631 EMC: Not doing DLMC/MC download because Flash image invalid.
00:00:00:05.639 EMC: Getting Power Supply revision info addr=0.
00:00:00:05.660 EMC: Checking PS rev for 0$
00:00:00:05.664 EMC:     actual: 01.02 flash: 65535.65535
00:00:00:05.668 EMC: Not doing PS download: crc check: 0 ver check: 0
00:00:00:05.675 EMC: Checking80$CPLD revs: actual: 13 flash: -1
00:00:00:05.681 EMC: Not doing CPLD download: crc check: 0 ver check: 0
00:00:00:05.786 EMC: Getting Power Supply revision info addr=0.
00:00:00:05.808 EMC: Setting Update lock: 0
00:00:00:05.863 EMC: ENCLOSURE status going from OK to FAULTED
00:00:00:05.868 EMC: PEER POWER STATE going from OFF to ON
00:00:00:05.873 EMC: PEER INSERTED status going from NOT INSERTED to INSERTED
00:00:00:05.880 EMC: PEER STATE going from OFF to BOOTING
00:00:00:05.884 EMC: POWER B faulted going from OK to FAULTED
00:00:00:05.891 EMC: POWER B AC power fail going from OK to FAULTED
00:00:00:05.896 EMC: Drive 0 phy status going from NOT READY to READY
00:00:00:05.903 EMC: Drive 1 phy status going from NOT READY to READY
00:00:00:05.910 EMC: Drive 2 phy status going from NOT READY to READY
00:00:00:05.917 EMC: Drive 3 phy status going from NOT READY to READY
00:00:00:05.924 EMC: Drive 4 phy status going from NOT READY to READY
00:00:00:05.930 EMC: Drive 5 phy status going from NOT READY to READY
00:00:00:05.937 EMC: Drive 6 phy status going from NOT READY to READY
00:00:00:05.942 EMC: Drive 7 phy status going from NOT READY to READY
00:00:00:05.949 EMC: Drive 8 phy status going from NOT READY to READY
00:00:00:05.956 EMC: Drive 9 phy status going from NOT READY to READY
00:00:00:05.962 EMC: Drive 10 phy status going from NOT READY to READY
00:00:00:05.969 EMC: Drive 11 phy status going from NOT READY to READY
00:00:00:05.975 EMC: Downstream cable phy 0 status going from NOT READY to READY
00:00:00:05.982 EMC: Downstream cable phy 1 status going from NOT READY to READY
00:00:00:05.989 EMC: Downstream cable phy 2 status going from NOT READY to READY
00:00:00:05.998 EMC: Downstream cable phy 3 status going from NOT READY to READY
00:00:00:06.005 EMC: DRIVE 0 TYPE going from SATA to SAS
00:00:00:06.009 EMC: DRIVE 1 TYPE going from SATA to SAS
00:00:00:06.014 EMC: DRIVE 2 TYPE going from SATA to SAS
00:00:00:06.019 EMC: DRIVE 3 TYPE going from SATA to SAS
00:00:00:06.024 EMC: DRIVE 4 TYPE going from SATA to SAS
00:00:00:06.029 EMC: DRIVE 5 TYPE going from SATA to SAS
00:00:00:06.034 EMC: DRIVE 6 TYPE going from SATA to SAS
00:00:00:06.039 EMC: DRIVE 7 TYPE going from SATA to SAS
00:00:00:06.044 EMC: DRIVE 8 TYPE going from SATA to SAS
00:00:00:06.050 EMC: DRIVE 9 TYPE going from SATA to SAS
00:00:00:06.055 EMC: DRIVE 10 TYPE going from SATA to SAS
00:00:00:06.060 EMC: DRIVE 11 TYPE going from SATA to SAS
00:00:00:06.066 EMC: DRIVE 0 INSERT going from NOT INSERTED to INSERTED
00:00:00:06.072 EMC: DRIVE 1 INSERT going from NOT INSERTED to INSERTED
00:00:00:06.079 EMC: DRIVE 2 INSERT going from NOT INSERTED to INSERTED
00:00:00:06.085 EMC: DRIVE 3 INSERT going from NOT INSERTED to INSERTED
00:00:00:06.091 EMC: DRIVE 4 INSERT going from NOT INSERTED to INSERTED
00:00:00:06.097 EMC: DRIVE 5 INSERT going from NOT INSERTED to INSERTED
00:00:00:06.103 EMC: DRIVE 6 INSERT going from NOT INSERTED to INSERTED
00:00:00:06.110 EMC: DRIVE 7 INSERT going from NOT INSERTED to INSERTED
00:00:00:06.116 EMC: DRIVE 8 INSERT going from NOT INSERTED to INSERTED
00:00:00:06.122 EMC: DRIVE 9 INSERT going from NOT INSERTED to INSERTED
00:00:00:06.128 EMC: DRIVE 10 INSERT going from NOT INSERTED to INSERTED
00:00:00:06.134 EMC: DRIVE 11 INSERT going from NOT INSERTED to INSERTED
00:00:00:06.141 EMC: MISC STATUS HW Type going from 0 to 1
00:00:00:06.147 EMC: Detected downstream addr chg NONE to 50060489_703b0c7f.
00:00:00:06.156 EMC: Detected peer downstream addr chg NONE to INVALID.
00:00:00:06.163 EMC: Detected peer upstream addr chg NONE to INVALID.
00:00:00:06.168 EMC: Detected peer SSP addr chg NONE to INVALID.
00:00:00:06.174 EMC: PEER SIDE going from UNSUPPORTED to SIDE A
00:00:00:06.179 EMC: LED updater changing Upstream Fault LED from NO_CHANGE to OFF
00:00:00:06.187 EMC: LED updater changing Downstream Fault LED from NO_CHANGE to OFF
00:00:00:06.193 EMC: LED updater changing Upstream Conn LED from NO_CHANGE to OFF
00:00:00:06.200 EMC: LED updater changing Downstream Conn LED from NO_CHANGE to OFF
00:00:00:06.208 EMC: Writing LED command to MC: "L55555555"
00:00:00:06.277 EMC: LED updater changing slot 0 fault LED from NO_CHANGE to OFF.
00:00:00:06.283 EMC: LED updater changing slot 1 fault LED from NO_CHANGE to OFF.
00:00:00:06.291 EMC: LED updater changing slot 2 fault LED from NO_CHANGE to OFF.
00:00:00:06.298 EMC: LED updater changing slot 3 fault LED from NO_CHANGE to OFF.
00:00:00:06.306 EMC: LED updater changing slot 4 fault LED from NO_CHANGE to OFF.
00:00:00:06.313 EMC: LED updater changing slot 5 fault LED from NO_CHANGE to OFF.
00:00:00:06.321 EMC: LED updater changing slot 6 fault LED from NO_CHANGE to OFF.
00:00:00:06.328 EMC: LED updater changing slot 7 fault LED from NO_CHANGE to OFF.
00:00:00:06.336 EMC: LED updater changing slot 8 fault LED from NO_CHANGE to OFF.
00:00:00:06.343 EMC: LED updater changing slot 9 fault LED from NO_CHANGE to OFF.
00:00:00:06.351 EMC: LED updater changing slot 10 fault LED from NO_CHANGE to OFF.
00:00:00:06.358 EMC: LED updater changing slot 11 fault LED from NO_CHANGE to OFF.
00:00:00:06.365 EMC: LED updater changing slot 12 fault LED from NO_CHANGE to OFF.
00:00:00:06.372 EMC: LED updater changing slot 13 fault LED from NO_CHANGE to OFF.
00:00:00:06.379 EMC: LED updater changing slot 14 fault LED from NO_CHANGE to OFF.
00:00:00:06.387 EMC: Sending changed local info to peer.
00:00:00:07.889 EMC: ...read processing took 0 ms, status=Success
00:00:00:08.542 EMC: ...write took 646 ms, status=Success
00:00:00:08.547 EMC: Force activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14
00:00:00:08.814 EMC: Downstream wide port: CONNECTED.
00:00:00:08.836 EMC: Detected local PS FAULT change FAULTED to OK.
00:00:00:08.841 EMC: Detected local PS AC FAIL change FAULTED to OK.
00:00:00:08.847 EMC: Setting downstream connectivity LED to ON because downstream connection found.
00:00:00:08.855 EMC: Expander requesting Downstream Conn LED change from OFF to ON
00:00:00:08.883 EMC: ENCLOSURE status going from FAULTED to OK
00:00:00:08.888 EMC: DOWNSTREAM PORT status going from UNCONNECTED to CONNECTED
00:00:00:08.895 EMC: POWER B faulted going from FAULTED to OK
00:00:00:08.900 EMC: POWER B AC power fail going from FAULTED to OK
00:00:00:08.908 EMC: Detected peer downstream addr chg INVALID to 50060489_703b0c3f.
00:00:00:08.915 EMC: Detected peer upstream addr chg INVALID to NONE.
00:00:00:08.924 EMC: Detected peer SSP addr chg INVALID to 50060489_703b18be.
00:00:00:08.931 EMC: LED updater changing Downstream Conn LED from OFF to ON
00:00:00:08.940 EMC: Writing LED command to MC: "L55955555"
00:00:00:09.009 EMC: Sending changed local info to peer.
00:00:00:09.678 EMC: Other READ PAGE change detected.
00:00:03:16.330 EMC: Upstream cable phy 0 status going from NOT READY to READY
00:00:03:16.339 EMC: Upstream cable phy 1 status going from NOT READY to READY
00:00:03:16.346 EMC: Upstream cable phy 2 status going from NOT READY to READY
00:00:03:16.355 EMC: Upstream cable phy 3 status going from NOT READY to READY
00:00:03:16.364 EMC: Detected upstream addr chg NONE to 50060489_703ecaff.
00:00:03:16.372 EMC: Sending changed local info to peer.
00:00:03:17.088 EMC: ...read processing took 0 ms, status=Success
00:00:03:18.025 EMC: Upstream wide port: CONNECTED.
00:00:03:18.047 EMC: Setting upstream connectivity LED to ON because upstream connection found.
00:00:03:18.047 EMC: Setting upstream connectivity LED to ON because upstream connection found.
00:00:03:18.055 EMC: Expander requesting Upstream Conn LED change from OFF to ON
00:00:03:18.082 EMC: UPSTREAM PORT status going from UNCONNECTED to CONNECTED
00:00:03:18.090 EMC: Detected peer upstream addr chg NONE to 50060489_703ecabf.
00:00:03:18.096 EMC: LED updater changing Upstream Conn LED from OFF to ON
00:00:03:18.105 EMC: Writing LED command to MC: "L55A55555"
00:00:03:18.174 EMC: Sending changed local info to peer.
00:00:03:19.100 EMC: ...read processing took 0 ms, status=Success
00:00:03:20.251 EMC: Other READ PAGE change detected.
00:00:04:47.723 EMC: Detected peer upstream addr chg 50060489_703ecabf to NONE.
00:00:04:48.947 EMC: Other READ PAGE change detected.
00:00:04:50.185 EMC: Detected peer upstream addr chg NONE to 50060489_703ecabf.
00:00:04:51.151 EMC: Other READ PAGE change detected.
00:00:05:33.982 EMC: Year 2011, Month 11
00:00:05:34.002 EMC: Resynchronizing to Flare time: 541542328 ms; timestamp adjusted to: 0 ms.
06:06:25:42.356 EMC: Clearing state change bit.
06:06:25:42.361 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:06:25:42.546 EMC: Setting enclosure number to 1
06:06:25:42.568 EMC: DISPLAY command success, encl number=01, mode=C.
06:06:25:42.573 EMC: Flare assigns this enclosure number = 255, generation number = 0x0502
06:06:25:42.581 EMC: Flare polling state change: self NO to YES, peer NO to NO
06:06:25:42.589 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:06:25:42.601 EMC: DISPLAY command success, encl number=01, mode=4.
06:06:25:42.727 EMC: Other READ PAGE change detected.
06:06:25:42.734 EMC: Sending changed local info to peer.
06:06:25:43.080 EMC: Setting state change bit.
06:06:25:46.296 EMC: Clearing state change bit.
06:06:25:46.301 EMC: Setting enclosure number to 1
06:06:25:46.316 EMC: DISPLAY command success, encl number=01, mode=4.
06:06:25:46.321 EMC: Flare assigns this enclosure number = 1, generation number = 0x0502
06:06:25:46.328 EMC: ...but already assigned!
06:06:25:46.515 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:06:26:10.687 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:06:26:13.125 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:06:26:15.609 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:06:26:18.046 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:06:26:20.515 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:06:26:58.243 EMC: Flare polling state change: self YES to YES, peer NO to YES
06:06:26:58.268 EMC: DISPLAY command success, encl number=01, mode=4.
06:06:26:58.574 Setting CPLD activity LED mode to AND because both sides being polled.
06:06:27:04.265 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:07:29:17.751 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
06:07:29:17.774 EMC: DISPLAY command success, encl number=01, mode=4.
06:07:29:18.074 Setting CPLD activity LED mode to OR because both sides not being polled.
06:07:29:20.313 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
06:07:29:20.336 EMC: DISPLAY command success, encl number=01, mode=4.
06:07:29:20.636 Setting CPLD activity LED mode to AND because both sides being polled.
                                                                                                                                                                  

Buffer Type: SXP Trace
Buffer Id: 0
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 49th at 17:03:03.
00:00:00:01:265 EMC: Setting Update lock: 1
00:00:00:01:399 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:420 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:440 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:460 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:482 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:502 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:507 EMC: Failed to get Power Supply revision info.
00:00:00:01:514 EMC: SXP FW Version:   04.05
00:00:00:01:518 EMC: SXP BOOT Version: 03.00
00:00:00:01:522 EMC: SXP ISTR Version: 03.05
00:00:00:01:526 EMC: MC Version:       16.01
00:00:00:01:531 EMC: DLMC Version:     14.47
00:00:00:01:535 EMC: PS Version:       00.01
00:00:00:01:539 EMC: CPLD Version:     00.09
00:00:00:01:543 EMC: Base SAS Address: 50060480_00b680c0
00:00:00:01:548 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:557 EMC: Exception flag read from register is 0
00:00:00:00:985 EMC: Setting enclosure number to 255
00:00:00:01:005 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:01:026 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:049 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:069 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:090 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:112 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:119 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:142 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:165 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:185 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:239 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:259 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:265 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:287 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:308 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:330 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:350 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:370 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:375 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:383 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:01:389 EMC: Checking for updated FW!
00:00:00:01:393 EMC: Checking for SXP FW download
00:00:00:01:420 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:01:435 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:01:440 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:15:669 WDG EXPIRED: Elapsed time since last WDG run: 799 ms
00:00:00:15:674 WDG: Pong not received from: EMA
                                              

Buffer Type: SXP Trace
Buffer Id: 1
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 946
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:15.7
00:00:00:01:264 EMC: Setting Update lock: 1
00:00:00:01:350 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:384 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:404 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:424 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:445 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:467 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:472 EMC: Failed to get Power Supply revision info.
00:00:00:01:478 EMC: SXP FW Version:   04.05
00:00:00:01:483 EMC: SXP BOOT Version: 03.00
00:00:00:01:487 EMC: SXP ISTR Version: 03.05
00:00:00:01:491 EMC: MC Version:       16.01
00:00:00:01:497 EMC: DLMC Version:     14.47
00:00:00:01:501 EMC: PS Version:       00.01
00:00:00:01:505 EMC: CPLD Version:     00.13
00:00:00:15:768 WDG EXPIRED: Elapsed time since last WDG run: 229 ms
00:00:00:15:773 WDG: Pong not received from: EMA
                 

Buffer Type: SXP Trace
Buffer Id: 2
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:51.
00:00:00:01:263 EMC: Setting Update lock: 1
00:00:00:01:349 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:382 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:402 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:423 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:443 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:465 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:470 EMC: Failed to get Power Supply revision info.
00:00:00:01:476 EMC: SXP FW Version:   04.05
00:00:00:01:481 EMC: SXP BOOT Version: 03.00
00:00:00:01:485 EMC: SXP ISTR Version: 03.05
00:00:00:01:489 EMC: MC Version:       16.01
00:00:00:01:493 EMC: DLMC Version:     14.47
00:00:00:01:498 EMC: PS Version:       00.01
00:00:00:01:502 EMC: CPLD Version:     00.13
00:00:00:01:506 EMC: Base SAS Address: 50060480_00fa80c0
00:00:00:01:510 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:520 EMC: Exception flag read from register is 1
00:00:00:36:984 EMC: Setting enclosure number to 255
00:00:00:37:003 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:37:046 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:068 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:089 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:109 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:130 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:136 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:160 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:183 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:204 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:225 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:269 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:274 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:298 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:321 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:342 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:363 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:385 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:390 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:397 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:37:404 EMC: Checking for updated FW!
00:00:00:37:408 EMC: Checking for SXP FW download
00:00:00:37:436 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:37:451 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:37:456 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:51:683 WDG EXPIRED: Elapsed time since last WDG run: 792 ms
00:00:00:51:688 WDG: Pong not received from: EMA
                                              

Buffer Type: Expander Ring Buffer Trace
Buffer Id: 255
Source: Manual
SXP Major Rev: 04
SXP Minor Rev: 30
Length: -1
Timestamp: 11/13/2011 00:25:11
        
00:00:00:06.005 EMC: DRIVE 0 TYPE going from SATA to SAS
00:00:00:06.009 EMC: DRIVE 1 TYPE going from SATA to SAS
00:00:00:06.014 EMC: DRIVE 2 TYPE going from SATA to SAS
00:00:00:06.019 EMC: DRIVE 3 TYPE going from SATA to SAS
00:00:00:06.024 EMC: DRIVE 4 TYPE going from SATA to SAS
00:00:00:06.029 EMC: DRIVE 5 TYPE going from SATA to SAS
00:00:00:06.034 EMC: DRIVE 6 TYPE going from SATA to SAS
00:00:00:06.039 EMC: DRIVE 7 TYPE going from SATA to SAS
00:00:00:06.044 EMC: DRIVE 8 TYPE going from SATA to SAS
00:00:00:06.050 EMC: DRIVE 9 TYPE going from SATA to SAS
00:00:00:06.055 EMC: DRIVE 10 TYPE going from SATA to SAS
00:00:00:06.060 EMC: DRIVE 11 TYPE going from SATA to SAS
00:00:00:06.066 EMC: DRIVE 0 INSERT going from NOT INSERTED to INSERTED
00:00:00:06.072 EMC: DRIVE 1 INSERT going from NOT INSERTED to INSERTED
00:00:00:06.079 EMC: DRIVE 2 INSERT going from NOT INSERTED to INSERTED
00:00:00:06.085 EMC: DRIVE 3 INSERT going from NOT INSERTED to INSERTED
00:00:00:06.091 EMC: DRIVE 4 INSERT going from NOT INSERTED to INSERTED
00:00:00:06.097 EMC: DRIVE 5 INSERT going from NOT INSERTED to INSERTED
00:00:00:06.103 EMC: DRIVE 6 INSERT going from NOT INSERTED to INSERTED
00:00:00:06.110 EMC: DRIVE 7 INSERT going from NOT INSERTED to INSERTED
00:00:00:06.116 EMC: DRIVE 8 INSERT going from NOT INSERTED to INSERTED
00:00:00:06.122 EMC: DRIVE 9 INSERT going from NOT INSERTED to INSERTED
00:00:00:06.128 EMC: DRIVE 10 INSERT going from NOT INSERTED to INSERTED
00:00:00:06.134 EMC: DRIVE 11 INSERT going from NOT INSERTED to INSERTED
00:00:00:06.141 EMC: MISC STATUS HW Type going from 0 to 1
00:00:00:06.147 EMC: Detected downstream addr chg NONE to 50060489_703b0c7f.
00:00:00:06.156 EMC: Detected peer downstream addr chg NONE to INVALID.
00:00:00:06.163 EMC: Detected peer upstream addr chg NONE to INVALID.
00:00:00:06.168 EMC: Detected peer SSP addr chg NONE to INVALID.
00:00:00:06.174 EMC: PEER SIDE going from UNSUPPORTED to SIDE A
00:00:00:06.179 EMC: LED updater changing Upstream Fault LED from NO_CHANGE to OFF
00:00:00:06.187 EMC: LED updater changing Downstream Fault LED from NO_CHANGE to OFF
00:00:00:06.193 EMC: LED updater changing Upstream Conn LED from NO_CHANGE to OFF
00:00:00:06.200 EMC: LED updater changing Downstream Conn LED from NO_CHANGE to OFF
00:00:00:06.208 EMC: Writing LED command to MC: "L55555555"
00:00:00:06.277 EMC: LED updater changing slot 0 fault LED from NO_CHANGE to OFF.
00:00:00:06.283 EMC: LED updater changing slot 1 fault LED from NO_CHANGE to OFF.
00:00:00:06.291 EMC: LED updater changing slot 2 fault LED from NO_CHANGE to OFF.
00:00:00:06.298 EMC: LED updater changing slot 3 fault LED from NO_CHANGE to OFF.
00:00:00:06.306 EMC: LED updater changing slot 4 fault LED from NO_CHANGE to OFF.
00:00:00:06.313 EMC: LED updater changing slot 5 fault LED from NO_CHANGE to OFF.
00:00:00:06.321 EMC: LED updater changing slot 6 fault LED from NO_CHANGE to OFF.
00:00:00:06.328 EMC: LED updater changing slot 7 fault LED from NO_CHANGE to OFF.
00:00:00:06.336 EMC: LED updater changing slot 8 fault LED from NO_CHANGE to OFF.
00:00:00:06.343 EMC: LED updater changing slot 9 fault LED from NO_CHANGE to OFF.
00:00:00:06.351 EMC: LED updater changing slot 10 fault LED from NO_CHANGE to OFF.
00:00:00:06.358 EMC: LED updater changing slot 11 fault LED from NO_CHANGE to OFF.
00:00:00:06.365 EMC: LED updater changing slot 12 fault LED from NO_CHANGE to OFF.
00:00:00:06.372 EMC: LED updater changing slot 13 fault LED from NO_CHANGE to OFF.
00:00:00:06.379 EMC: LED updater changing slot 14 fault LED from NO_CHANGE to OFF.
00:00:00:06.387 EMC: Sending changed local info to peer.
00:00:00:07.889 EMC: ...read processing took 0 ms, status=Success
00:00:00:08.542 EMC: ...write took 646 ms, status=Success
00:00:00:08.547 EMC: Force activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14
00:00:00:08.814 EMC: Downstream wide port: CONNECTED.
00:00:00:08.836 EMC: Detected local PS FAULT change FAULTED to OK.
00:00:00:08.841 EMC: Detected local PS AC FAIL change FAULTED to OK.
00:00:00:08.847 EMC: Setting downstream connectivity LED to ON because downstream connection found.
00:00:00:08.855 EMC: Expander requesting Downstream Conn LED change from OFF to ON
00:00:00:08.883 EMC: ENCLOSURE status going from FAULTED to OK
00:00:00:08.888 EMC: DOWNSTREAM PORT status going from UNCONNECTED to CONNECTED
00:00:00:08.895 EMC: POWER B faulted going from FAULTED to OK
00:00:00:08.900 EMC: POWER B AC power fail going from FAULTED to OK
00:00:00:08.908 EMC: Detected peer downstream addr chg INVALID to 50060489_703b0c3f.
00:00:00:08.915 EMC: Detected peer upstream addr chg INVALID to NONE.
00:00:00:08.924 EMC: Detected peer SSP addr chg INVALID to 50060489_703b18be.
00:00:00:08.931 EMC: LED updater changing Downstream Conn LED from OFF to ON
00:00:00:08.940 EMC: Writing LED command to MC: "L55955555"
00:00:00:09.009 EMC: Sending changed local info to peer.
00:00:00:09.678 EMC: Other READ PAGE change detected.
00:00:03:16.330 EMC: Upstream cable phy 0 status going from NOT READY to READY
00:00:03:16.339 EMC: Upstream cable phy 1 status going from NOT READY to READY
00:00:03:16.346 EMC: Upstream cable phy 2 status going from NOT READY to READY
00:00:03:16.355 EMC: Upstream cable phy 3 status going from NOT READY to READY
00:00:03:16.364 EMC: Detected upstream addr chg NONE to 50060489_703ecaff.
00:00:03:16.372 EMC: Sending changed local info to peer.
00:00:03:17.088 EMC: ...read processing took 0 ms, status=Success
00:00:03:18.025 EMC: Upstream wide port: CONNECTED.
00:00:03:18.047 EMC: Setting upstream connectivity LED to ON because upstream connection found.
00:00:03:18.055 EMC: Expander requesting Upstream Conn LED change from OFF to ON
00:00:03:18.082 EMC: UPSTREAM PORT status going from UNCONNECTED to CONNECTED
00:00:03:18.090 EMC: Detected peer upstream addr chg NONE to 50060489_703ecabf.
00:00:03:18.096 EMC: LED updater changing Upstream Conn LED from OFF to ON
00:00:03:18.105 EMC: Writing LED command to MC: "L55A55555"
00:00:03:18.174 EMC: Sending changed local info to peer.
00:00:03:19.100 EMC: ...read processing took 0 ms, status=Success
00:00:03:20.251 EMC: Other READ PAGE change detected.
00:00:04:47.723 EMC: Detected peer upstream addr chg 50060489_703ecabf to NONE.
00:00:04:48.947 EMC: Other READ PAGE change detected.
00:00:04:50.185 EMC: Detected peer upstream addr chg NONE to 50060489_703ecabf.
00:00:04:51.151 EMC: Other READ PAGE change detected.
00:00:05:33.982 EMC: Year 2011, Month 11
00:00:05:34.002 EMC: Resynchronizing to Flare time: 541542328 ms; timestamp adjusted to: 0 ms.
06:06:25:42.356 EMC: Clearing state change bit.
06:06:25:42.361 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:06:25:42.546 EMC: Setting enclosure number to 1
06:06:25:42.568 EMC: DISPLAY command success, encl number=01, mode=C.
06:06:25:42.573 EMC: Flare assigns this enclosure number = 255, generation number = 0x0502
06:06:25:42.581 EMC: Flare polling state change: self NO to YES, peer NO to NO
06:06:25:42.589 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:06:25:42.601 EMC: DISPLAY command success, encl number=01, mode=4.
06:06:25:42.727 EMC: Other READ PAGE change detected.
06:06:25:42.734 EMC: Sending changed local info to peer.
06:06:25:43.080 EMC: Setting state change bit.
06:06:25:46.296 EMC: Clearing state change bit.
06:06:25:46.301 EMC: Setting enclosure number to 1
06:06:25:46.316 EMC: DISPLAY command success, encl number=01, mode=4.
06:06:25:46.321 EMC: Flare assigns this enclosure number = 1, generation number = 0x0502
06:06:25:46.328 EMC: ...but already assigned!
06:06:25:46.515 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:06:26:10.687 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:06:26:13.125 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:06:26:15.609 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:06:26:18.046 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:06:26:20.515 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:06:26:58.243 EMC: Flare polling state change: self YES to YES, peer NO to YES
06:06:26:58.268 EMC: DISPLAY command success, encl number=01, mode=4.
06:06:26:58.574 Setting CPLD activity LED mode to AND because both sides being polled.
06:06:27:04.265 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
06:07:29:17.751 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
06:07:29:17.774 EMC: DISPLAY command success, encl number=01, mode=4.
06:07:29:18.074 Setting CPLD activity LED mode to OR because both sides not being polled.
06:07:29:20.313 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
06:07:29:20.336 EMC: DISPLAY command success, encl number=01, mode=4.
06:07:29:20.636 Setting CPLD activity LED mode to AND because both sides being polled.
06:11:15:08.714 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
06:11:15:08.752 EMC: DISPLAY command success, encl number=01, mode=4.
06:11:15:08.759 EMC: ...read processing took 46 ms, status=Success
06:11:15:10.063 Setting CPLD activity LED mode to OR because both sides not being polled.
06:11:15:13.009 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
06:11:15:13.047 EMC: DISPLAY command success, encl number=01, mode=4.
06:11:15:13.409 Setting CPLD activity LED mode to AND because both sides being polled.
07:00:00:00.536 EMC: New Day 7
07:00:00:01.283 EMC: Resynchronizing to Flare time: 604759139 ms; timestamp adjusted to: 0 ms.
07:00:00:00.154 EMC: New Day 7
08:00:00:00.030 EMC: New Day 8
08:00:00:02.521 EMC: Resynchronizing to Flare time: 691288983 ms; timestamp adjusted to: 0 ms.
09:00:00:00.306 EMC: New Day 9
09:00:00:01.020 EMC: Resynchronizing to Flare time: 777687577 ms; timestamp adjusted to: 0 ms.
10:00:00:00.173 EMC: New Day 10
10:00:00:02.502 EMC: Resynchronizing to Flare time: 864089452 ms; timestamp adjusted to: 0 ms.
10:17:17:29.207 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
10:17:17:29.215 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
10:17:17:29.222 Setting CPLD activity LED mode to OR because both sides not being polled.
10:17:17:29.232 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
10:17:17:29.257 EMC: DISPLAY command success, encl number=01, mode=C.
10:17:17:29.303 EMC: Sending changed local info to peer.
10:17:17:32.487 EMC: Flare polling state restored because good generation number 0x0502 received.
10:17:17:32.496 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
10:17:17:32.505 Setting CPLD activity LED mode to AND because both sides being polled.
10:17:17:32.513 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
10:17:17:32.530 EMC: Sending changed local info to peer.
10:17:17:32.541 EMC: DISPLAY command success, encl number=01, mode=4.
10:17:17:32.581 EMC: Resynchronizing to Flare time: 926315077 ms; timestamp adjusted to: 0 ms.
11:00:00:00.651 EMC: New Day 11
11:00:00:01.398 EMC: Resynchronizing to Flare time: 950425702 ms; timestamp adjusted to: 0 ms.
12:00:00:00.153 EMC: New Day 12
12:00:00:03.339 EMC: Resynchronizing to Flare time: 1036889921 ms; timestamp adjusted to: 0 ms.
13:00:00:00.324 EMC: New Day 13
13:00:00:02.222 EMC: Resynchronizing to Flare time: 1123288514 ms; timestamp adjusted to: 0 ms.
                                                                                                                                                                 

Buffer Type: SXP Trace
Buffer Id: 0
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 49th at 17:03:03.
00:00:00:01:265 EMC: Setting Update lock: 1
00:00:00:01:399 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:420 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:440 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:460 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:482 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:502 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:507 EMC: Failed to get Power Supply revision info.
00:00:00:01:514 EMC: SXP FW Version:   04.05
00:00:00:01:518 EMC: SXP BOOT Version: 03.00
00:00:00:01:522 EMC: SXP ISTR Version: 03.05
00:00:00:01:526 EMC: MC Version:       16.01
00:00:00:01:531 EMC: DLMC Version:     14.47
00:00:00:01:535 EMC: PS Version:       00.01
00:00:00:01:539 EMC: CPLD Version:     00.09
00:00:00:01:543 EMC: Base SAS Address: 50060480_00b680c0
00:00:00:01:548 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:557 EMC: Exception flag read from register is 0
00:00:00:00:985 EMC: Setting enclosure number to 255
00:00:00:01:005 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:01:026 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:049 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:069 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:090 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:112 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:119 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:142 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:165 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:185 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:239 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:259 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:265 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:287 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:308 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:330 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:350 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:370 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:375 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:383 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:01:389 EMC: Checking for updated FW!
00:00:00:01:393 EMC: Checking for SXP FW download
00:00:00:01:420 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:01:435 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:01:440 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:15:669 WDG EXPIRED: Elapsed time since last WDG run: 799 ms
00:00:00:15:674 WDG: Pong not received from: EMA
                                              

Buffer Type: SXP Trace
Buffer Id: 1
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 946
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:15.7
00:00:00:01:264 EMC: Setting Update lock: 1
00:00:00:01:350 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:384 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:404 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:424 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:445 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:467 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:472 EMC: Failed to get Power Supply revision info.
00:00:00:01:478 EMC: SXP FW Version:   04.05
00:00:00:01:483 EMC: SXP BOOT Version: 03.00
00:00:00:01:487 EMC: SXP ISTR Version: 03.05
00:00:00:01:491 EMC: MC Version:       16.01
00:00:00:01:497 EMC: DLMC Version:     14.47
00:00:00:01:501 EMC: PS Version:       00.01
00:00:00:01:505 EMC: CPLD Version:     00.13
00:00:00:15:768 WDG EXPIRED: Elapsed time since last WDG run: 229 ms
00:00:00:15:773 WDG: Pong not received from: EMA
                 

Buffer Type: SXP Trace
Buffer Id: 2
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:51.
00:00:00:01:263 EMC: Setting Update lock: 1
00:00:00:01:349 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:382 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:402 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:423 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:443 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:465 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:470 EMC: Failed to get Power Supply revision info.
00:00:00:01:476 EMC: SXP FW Version:   04.05
00:00:00:01:481 EMC: SXP BOOT Version: 03.00
00:00:00:01:485 EMC: SXP ISTR Version: 03.05
00:00:00:01:489 EMC: MC Version:       16.01
00:00:00:01:493 EMC: DLMC Version:     14.47
00:00:00:01:498 EMC: PS Version:       00.01
00:00:00:01:502 EMC: CPLD Version:     00.13
00:00:00:01:506 EMC: Base SAS Address: 50060480_00fa80c0
00:00:00:01:510 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:520 EMC: Exception flag read from register is 1
00:00:00:36:984 EMC: Setting enclosure number to 255
00:00:00:37:003 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:37:046 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:068 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:089 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:109 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:130 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:136 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:160 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:183 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:204 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:225 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:269 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:274 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:298 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:321 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:342 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:363 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:385 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:390 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:397 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:37:404 EMC: Checking for updated FW!
00:00:00:37:408 EMC: Checking for SXP FW download
00:00:00:37:436 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:37:451 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:37:456 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:51:683 WDG EXPIRED: Elapsed time since last WDG run: 792 ms
00:00:00:51:688 WDG: Pong not received from: EMA
                                              

Buffer Type: Expander Ring Buffer Trace
Buffer Id: 255
Source: Manual
SXP Major Rev: 04
SXP Minor Rev: 30
Length: -1
Timestamp: 01/09/2012 17:49:58
        
25:14:36:04.675 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
25:14:36:04.709 EMC: DISPLAY command success, encl number=01, mode=4.
25:14:36:04.729 EMC: Sending changed local info to peer.
25:14:36:04.743 EMC: Resynchronizing to Flare time: 2212617577 ms; timestamp adjusted to: 0 ms.
26:00:00:00.308 EMC: New Day 26
26:00:00:03.417 EMC: Resynchronizing to Flare time: 2246437421 ms; timestamp adjusted to: 0 ms.
27:00:00:00.005 EMC: New Day 27
27:00:00:01.418 EMC: Resynchronizing to Flare time: 2332888514 ms; timestamp adjusted to: 0 ms.
28:00:00:00.301 EMC: New Day 28
28:00:00:03.536 EMC: Resynchronizing to Flare time: 2419290389 ms; timestamp adjusted to: 0 ms.
29:00:00:00.310 EMC: New Day 29
29:00:00:02.607 EMC: Resynchronizing to Flare time: 2505688983 ms; timestamp adjusted to: 0 ms.
30:00:00:00.283 EMC: New Day 30
30:00:00:01.267 EMC: Resynchronizing to Flare time: 2592087577 ms; timestamp adjusted to: 0 ms.
31:00:00:00.262 EMC: New Day 31
31:00:00:03.159 EMC: Year 2011, Month 12
31:00:00:03.179 EMC: Resynchronizing to Flare time: 86489452 ms; timestamp adjusted to: 0 ms.
02:00:00:00.044 EMC: New Day 2
02:00:00:01.118 EMC: Resynchronizing to Flare time: 172888046 ms; timestamp adjusted to: 0 ms.
03:00:00:00.312 EMC: New Day 3
03:00:00:03.280 EMC: Resynchronizing to Flare time: 259289921 ms; timestamp adjusted to: 0 ms.
04:00:00:00.033 EMC: New Day 4
04:00:00:01.974 EMC: Resynchronizing to Flare time: 345688514 ms; timestamp adjusted to: 0 ms.
05:00:00:00.344 EMC: New Day 5
05:00:00:00.582 EMC: Resynchronizing to Flare time: 432087124 ms; timestamp adjusted to: 0 ms.
05:14:22:37.629 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
05:14:22:37.636 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
05:14:22:37.643 Setting CPLD activity LED mode to OR because both sides not being polled.
05:14:22:37.652 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
05:14:22:37.676 EMC: DISPLAY command success, encl number=01, mode=C.
05:14:22:37.721 EMC: Sending changed local info to peer.
05:14:22:38.170 EMC: ...read processing took 0 ms, status=Success
05:14:22:40.907 EMC: Flare polling state restored because good generation number 0x0502 received.
05:14:22:40.915 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
05:14:22:40.923 Setting CPLD activity LED mode to AND because both sides being polled.
05:14:22:40.930 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
05:14:22:40.956 EMC: DISPLAY command success, encl number=01, mode=4.
05:14:22:40.978 EMC: Resynchronizing to Flare time: 483812733 ms; timestamp adjusted to: 0 ms.
05:14:23:32.871 EMC: Sending changed local info to peer.
06:00:00:00.208 EMC: New Day 6
06:00:00:01.825 EMC: Resynchronizing to Flare time: 518436483 ms; timestamp adjusted to: 0 ms.
07:00:00:00.030 EMC: New Day 7
07:00:00:01.097 EMC: Resynchronizing to Flare time: 604887577 ms; timestamp adjusted to: 0 ms.
08:00:00:00.270 EMC: New Day 8
08:00:00:02.505 EMC: Resynchronizing to Flare time: 691289452 ms; timestamp adjusted to: 0 ms.
09:00:00:00.319 EMC: New Day 9
09:00:00:01.060 EMC: Resynchronizing to Flare time: 777688046 ms; timestamp adjusted to: 0 ms.
09:05:50:50.202 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
09:05:50:50.225 EMC: DISPLAY command success, encl number=01, mode=4.
09:05:50:50.521 Setting CPLD activity LED mode to OR because both sides not being polled.
09:05:50:53.722 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
09:05:50:53.745 EMC: DISPLAY command success, encl number=01, mode=4.
09:05:50:54.051 Setting CPLD activity LED mode to AND because both sides being polled.
10:00:00:00.263 EMC: New Day 10
10:00:00:03.361 EMC: Resynchronizing to Flare time: 864089921 ms; timestamp adjusted to: 0 ms.
11:00:00:00.241 EMC: New Day 11
11:00:00:01.977 EMC: Resynchronizing to Flare time: 950488514 ms; timestamp adjusted to: 0 ms.
12:00:00:00.163 EMC: New Day 12
12:00:00:00.613 EMC: Resynchronizing to Flare time: 1036887108 ms; timestamp adjusted to: 0 ms.
13:00:00:00.296 EMC: New Day 13
13:00:00:02.019 EMC: Resynchronizing to Flare time: 1123288983 ms; timestamp adjusted to: 0 ms.
14:00:00:00.132 EMC: New Day 14
14:00:00:00.622 EMC: Resynchronizing to Flare time: 1209687577 ms; timestamp adjusted to: 0 ms.
15:00:00:00.211 EMC: New Day 15
15:00:00:02.661 EMC: Resynchronizing to Flare time: 1296089452 ms; timestamp adjusted to: 0 ms.
15:13:46:39.956 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
15:13:46:39.963 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
15:13:46:39.970 Setting CPLD activity LED mode to OR because both sides not being polled.
15:13:46:39.979 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
15:13:46:40.002 EMC: DISPLAY command success, encl number=01, mode=C.
15:13:46:40.047 EMC: Sending changed local info to peer.
15:13:46:43.231 EMC: Flare polling state restored because good generation number 0x0502 received.
15:13:46:43.240 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
15:13:46:43.248 Setting CPLD activity LED mode to AND because both sides being polled.
15:13:46:43.255 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
15:13:46:43.280 EMC: DISPLAY command success, encl number=01, mode=4.
15:13:46:43.302 EMC: Sending changed local info to peer.
15:13:46:43.316 EMC: Resynchronizing to Flare time: 1345652733 ms; timestamp adjusted to: 0 ms.
16:00:00:00.168 EMC: New Day 16
16:00:00:02.047 EMC: Resynchronizing to Flare time: 1382438827 ms; timestamp adjusted to: 0 ms.
17:00:00:00.237 EMC: New Day 17
17:00:00:00.466 EMC: Resynchronizing to Flare time: 1468886639 ms; timestamp adjusted to: 0 ms.
17:19:03:40.052 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
17:19:03:40.075 EMC: DISPLAY command success, encl number=01, mode=4.
17:19:03:40.381 Setting CPLD activity LED mode to OR because both sides not being polled.
17:19:03:43.633 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
17:19:03:43.645 EMC: DISPLAY command success, encl number=01, mode=4.
17:19:03:43.944 Setting CPLD activity LED mode to AND because both sides being polled.
18:00:00:00.253 EMC: New Day 18
18:00:00:02.012 EMC: Resynchronizing to Flare time: 1555288514 ms; timestamp adjusted to: 0 ms.
19:00:00:00.170 EMC: New Day 19
19:00:00:00.272 EMC: Resynchronizing to Flare time: 1641687139 ms; timestamp adjusted to: 0 ms.
20:00:00:00.376 EMC: New Day 20
20:00:00:01.888 EMC: Resynchronizing to Flare time: 1728088983 ms; timestamp adjusted to: 0 ms.
21:00:00:00.020 EMC: New Day 21
21:00:00:01.036 EMC: Resynchronizing to Flare time: 1814487577 ms; timestamp adjusted to: 0 ms.
22:00:00:00.380 EMC: New Day 22
22:00:00:03.072 EMC: Resynchronizing to Flare time: 1900889452 ms; timestamp adjusted to: 0 ms.
23:00:00:00.029 EMC: New Day 23
23:00:00:01.568 EMC: Resynchronizing to Flare time: 1987288046 ms; timestamp adjusted to: 0 ms.
23:09:55:13.031 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
23:09:55:13.038 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
23:09:55:13.045 Setting CPLD activity LED mode to OR because both sides not being polled.
23:09:55:13.054 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
23:09:55:13.077 EMC: DISPLAY command success, encl number=01, mode=C.
23:09:55:13.123 EMC: Sending changed local info to peer.
23:09:55:16.310 EMC: Flare polling state restored because good generation number 0x0502 received.
23:09:55:16.318 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
23:09:55:16.326 Setting CPLD activity LED mode to AND because both sides being polled.
23:09:55:16.333 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
23:09:55:16.359 EMC: DISPLAY command success, encl number=01, mode=4.
23:09:55:16.394 EMC: Resynchronizing to Flare time: 2022951952 ms; timestamp adjusted to: 0 ms.
23:09:55:52.002 EMC: Sending changed local info to peer.
24:00:00:00.101 EMC: New Day 24
24:00:00:03.196 EMC: Resynchronizing to Flare time: 2073653827 ms; timestamp adjusted to: 0 ms.
25:00:00:00.134 EMC: New Day 25
25:00:00:01.681 EMC: Resynchronizing to Flare time: 2160088514 ms; timestamp adjusted to: 0 ms.
26:00:00:00.241 EMC: New Day 26
26:00:00:00.345 EMC: Resynchronizing to Flare time: 2246487139 ms; timestamp adjusted to: 0 ms.
27:00:00:00.071 EMC: New Day 27
27:00:00:02.374 EMC: Resynchronizing to Flare time: 2332888983 ms; timestamp adjusted to: 0 ms.
28:00:00:00.307 EMC: New Day 28
28:00:00:01.272 EMC: Resynchronizing to Flare time: 2419287577 ms; timestamp adjusted to: 0 ms.
29:00:00:00.015 EMC: New Day 29
29:00:00:03.139 EMC: Resynchronizing to Flare time: 2505689452 ms; timestamp adjusted to: 0 ms.
29:05:34:41.335 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
29:05:34:41.358 EMC: DISPLAY command success, encl number=01, mode=4.
29:05:34:41.664 Setting CPLD activity LED mode to OR because both sides not being polled.
29:05:34:44.548 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
29:05:34:44.571 EMC: DISPLAY command success, encl number=01, mode=4.
29:05:34:44.870 Setting CPLD activity LED mode to AND because both sides being polled.
30:00:00:00.127 EMC: New Day 30
30:00:00:01.578 EMC: Resynchronizing to Flare time: 2592088046 ms; timestamp adjusted to: 0 ms.
31:00:00:00.102 EMC: New Day 31
31:00:00:02.963 EMC: Resynchronizing to Flare time: 2678489921 ms; timestamp adjusted to: 0 ms.
32:00:00:00.206 EMC: New Day 32
32:00:00:01.804 EMC: Year 2012, Month 1
32:00:00:01.825 EMC: Resynchronizing to Flare time: 86488514 ms; timestamp adjusted to: 0 ms.
02:00:00:00.136 EMC: New Day 2
02:00:00:00.716 EMC: Resynchronizing to Flare time: 172887139 ms; timestamp adjusted to: 0 ms.
03:00:00:00.366 EMC: New Day 3
03:00:00:02.721 EMC: Resynchronizing to Flare time: 259288983 ms; timestamp adjusted to: 0 ms.
03:22:27:51.456 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
03:22:27:51.480 EMC: DISPLAY command success, encl number=01, mode=4.
03:22:27:51.793 Setting CPLD activity LED mode to OR because both sides not being polled.
03:22:27:55.003 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
03:22:27:55.027 EMC: DISPLAY command success, encl number=01, mode=4.
03:22:27:55.327 Setting CPLD activity LED mode to AND because both sides being polled.
04:00:00:00.705 EMC: New Day 4
04:00:00:00.903 EMC: Resynchronizing to Flare time: 345687577 ms; timestamp adjusted to: 0 ms.
05:00:00:00.196 EMC: New Day 5
05:00:00:02.295 EMC: Resynchronizing to Flare time: 432089452 ms; timestamp adjusted to: 0 ms.
06:00:00:00.149 EMC: New Day 6
06:00:00:01.247 EMC: Resynchronizing to Flare time: 518488046 ms; timestamp adjusted to: 0 ms.
07:00:00:00.033 EMC: New Day 7
07:00:00:00.294 EMC: Resynchronizing to Flare time: 604886639 ms; timestamp adjusted to: 0 ms.
08:00:00:00.291 EMC: New Day 8
08:00:00:02.045 EMC: Resynchronizing to Flare time: 691288514 ms; timestamp adjusted to: 0 ms.
09:00:00:00.261 EMC: New Day 9
09:00:00:00.929 EMC: Resynchronizing to Flare time: 777687108 ms; timestamp adjusted to: 0 ms.
                                                                                                                                                                 

Buffer Type: SXP Trace
Buffer Id: 0
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 49th at 17:03:03.
00:00:00:01:265 EMC: Setting Update lock: 1
00:00:00:01:399 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:420 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:440 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:460 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:482 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:502 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:507 EMC: Failed to get Power Supply revision info.
00:00:00:01:514 EMC: SXP FW Version:   04.05
00:00:00:01:518 EMC: SXP BOOT Version: 03.00
00:00:00:01:522 EMC: SXP ISTR Version: 03.05
00:00:00:01:526 EMC: MC Version:       16.01
00:00:00:01:531 EMC: DLMC Version:     14.47
00:00:00:01:535 EMC: PS Version:       00.01
00:00:00:01:539 EMC: CPLD Version:     00.09
00:00:00:01:543 EMC: Base SAS Address: 50060480_00b680c0
00:00:00:01:548 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:557 EMC: Exception flag read from register is 0
00:00:00:00:985 EMC: Setting enclosure number to 255
00:00:00:01:005 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:01:026 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:049 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:069 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:090 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:112 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:119 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:142 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:165 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:185 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:239 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:259 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:265 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:287 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:308 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:330 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:350 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:370 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:375 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:383 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:01:389 EMC: Checking for updated FW!
00:00:00:01:393 EMC: Checking for SXP FW download
00:00:00:01:420 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:01:435 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:01:440 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:15:669 WDG EXPIRED: Elapsed time since last WDG run: 799 ms
00:00:00:15:674 WDG: Pong not received from: EMA
                                              

Buffer Type: SXP Trace
Buffer Id: 1
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 946
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:15.7
00:00:00:01:264 EMC: Setting Update lock: 1
00:00:00:01:350 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:384 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:404 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:424 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:445 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:467 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:472 EMC: Failed to get Power Supply revision info.
00:00:00:01:478 EMC: SXP FW Version:   04.05
00:00:00:01:483 EMC: SXP BOOT Version: 03.00
00:00:00:01:487 EMC: SXP ISTR Version: 03.05
00:00:00:01:491 EMC: MC Version:       16.01
00:00:00:01:497 EMC: DLMC Version:     14.47
00:00:00:01:501 EMC: PS Version:       00.01
00:00:00:01:505 EMC: CPLD Version:     00.13
00:00:00:15:768 WDG EXPIRED: Elapsed time since last WDG run: 229 ms
00:00:00:15:773 WDG: Pong not received from: EMA
                 

Buffer Type: SXP Trace
Buffer Id: 2
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:51.
00:00:00:01:263 EMC: Setting Update lock: 1
00:00:00:01:349 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:382 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:402 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:423 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:443 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:465 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:470 EMC: Failed to get Power Supply revision info.
00:00:00:01:476 EMC: SXP FW Version:   04.05
00:00:00:01:481 EMC: SXP BOOT Version: 03.00
00:00:00:01:485 EMC: SXP ISTR Version: 03.05
00:00:00:01:489 EMC: MC Version:       16.01
00:00:00:01:493 EMC: DLMC Version:     14.47
00:00:00:01:498 EMC: PS Version:       00.01
00:00:00:01:502 EMC: CPLD Version:     00.13
00:00:00:01:506 EMC: Base SAS Address: 50060480_00fa80c0
00:00:00:01:510 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:520 EMC: Exception flag read from register is 1
00:00:00:36:984 EMC: Setting enclosure number to 255
00:00:00:37:003 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:37:046 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:068 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:089 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:109 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:130 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:136 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:160 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:183 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:204 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:225 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:269 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:274 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:298 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:321 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:342 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:363 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:385 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:390 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:397 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:37:404 EMC: Checking for updated FW!
00:00:00:37:408 EMC: Checking for SXP FW download
00:00:00:37:436 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:37:451 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:37:456 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:51:683 WDG EXPIRED: Elapsed time since last WDG run: 792 ms
00:00:00:51:688 WDG: Pong not received from: EMA
                                              

Buffer Type: Expander Ring Buffer Trace
Buffer Id: 255
Source: Manual
SXP Major Rev: 04
SXP Minor Rev: 30
Length: -1
Timestamp: 01/09/2012 18:25:11
        
25:14:36:04.675 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
25:14:36:04.709 EMC: DISPLAY command success, encl number=01, mode=4.
25:14:36:04.729 EMC: Sending changed local info to peer.
25:14:36:04.743 EMC: Resynchronizing to Flare time: 2212617577 ms; timestamp adjusted to: 0 ms.
26:00:00:00.308 EMC: New Day 26
26:00:00:03.417 EMC: Resynchronizing to Flare time: 2246437421 ms; timestamp adjusted to: 0 ms.
27:00:00:00.005 EMC: New Day 27
27:00:00:01.418 EMC: Resynchronizing to Flare time: 2332888514 ms; timestamp adjusted to: 0 ms.
28:00:00:00.301 EMC: New Day 28
28:00:00:03.536 EMC: Resynchronizing to Flare time: 2419290389 ms; timestamp adjusted to: 0 ms.
29:00:00:00.310 EMC: New Day 29
29:00:00:02.607 EMC: Resynchronizing to Flare time: 2505688983 ms; timestamp adjusted to: 0 ms.
30:00:00:00.283 EMC: New Day 30
30:00:00:01.267 EMC: Resynchronizing to Flare time: 2592087577 ms; timestamp adjusted to: 0 ms.
31:00:00:00.262 EMC: New Day 31
31:00:00:03.159 EMC: Year 2011, Month 12
31:00:00:03.179 EMC: Resynchronizing to Flare time: 86489452 ms; timestamp adjusted to: 0 ms.
02:00:00:00.044 EMC: New Day 2
02:00:00:01.118 EMC: Resynchronizing to Flare time: 172888046 ms; timestamp adjusted to: 0 ms.
03:00:00:00.312 EMC: New Day 3
03:00:00:03.280 EMC: Resynchronizing to Flare time: 259289921 ms; timestamp adjusted to: 0 ms.
04:00:00:00.033 EMC: New Day 4
04:00:00:01.974 EMC: Resynchronizing to Flare time: 345688514 ms; timestamp adjusted to: 0 ms.
05:00:00:00.344 EMC: New Day 5
05:00:00:00.582 EMC: Resynchronizing to Flare time: 432087124 ms; timestamp adjusted to: 0 ms.
05:14:22:37.629 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
05:14:22:37.636 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
05:14:22:37.643 Setting CPLD activity LED mode to OR because both sides not being polled.
05:14:22:37.652 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
05:14:22:37.676 EMC: DISPLAY command success, encl number=01, mode=C.
05:14:22:37.721 EMC: Sending changed local info to peer.
05:14:22:38.170 EMC: ...read processing took 0 ms, status=Success
05:14:22:40.907 EMC: Flare polling state restored because good generation number 0x0502 received.
05:14:22:40.915 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
05:14:22:40.923 Setting CPLD activity LED mode to AND because both sides being polled.
05:14:22:40.930 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
05:14:22:40.956 EMC: DISPLAY command success, encl number=01, mode=4.
05:14:22:40.978 EMC: Resynchronizing to Flare time: 483812733 ms; timestamp adjusted to: 0 ms.
05:14:23:32.871 EMC: Sending changed local info to peer.
06:00:00:00.208 EMC: New Day 6
06:00:00:01.825 EMC: Resynchronizing to Flare time: 518436483 ms; timestamp adjusted to: 0 ms.
07:00:00:00.030 EMC: New Day 7
07:00:00:01.097 EMC: Resynchronizing to Flare time: 604887577 ms; timestamp adjusted to: 0 ms.
08:00:00:00.270 EMC: New Day 8
08:00:00:02.505 EMC: Resynchronizing to Flare time: 691289452 ms; timestamp adjusted to: 0 ms.
09:00:00:00.319 EMC: New Day 9
09:00:00:01.060 EMC: Resynchronizing to Flare time: 777688046 ms; timestamp adjusted to: 0 ms.
09:05:50:50.202 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
09:05:50:50.225 EMC: DISPLAY command success, encl number=01, mode=4.
09:05:50:50.521 Setting CPLD activity LED mode to OR because both sides not being polled.
09:05:50:53.722 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
09:05:50:53.745 EMC: DISPLAY command success, encl number=01, mode=4.
09:05:50:54.051 Setting CPLD activity LED mode to AND because both sides being polled.
10:00:00:00.263 EMC: New Day 10
10:00:00:03.361 EMC: Resynchronizing to Flare time: 864089921 ms; timestamp adjusted to: 0 ms.
11:00:00:00.241 EMC: New Day 11
11:00:00:01.977 EMC: Resynchronizing to Flare time: 950488514 ms; timestamp adjusted to: 0 ms.
12:00:00:00.163 EMC: New Day 12
12:00:00:00.613 EMC: Resynchronizing to Flare time: 1036887108 ms; timestamp adjusted to: 0 ms.
13:00:00:00.296 EMC: New Day 13
13:00:00:02.019 EMC: Resynchronizing to Flare time: 1123288983 ms; timestamp adjusted to: 0 ms.
14:00:00:00.132 EMC: New Day 14
14:00:00:00.622 EMC: Resynchronizing to Flare time: 1209687577 ms; timestamp adjusted to: 0 ms.
15:00:00:00.211 EMC: New Day 15
15:00:00:02.661 EMC: Resynchronizing to Flare time: 1296089452 ms; timestamp adjusted to: 0 ms.
15:13:46:39.956 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
15:13:46:39.963 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
15:13:46:39.970 Setting CPLD activity LED mode to OR because both sides not being polled.
15:13:46:39.979 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
15:13:46:40.002 EMC: DISPLAY command success, encl number=01, mode=C.
15:13:46:40.047 EMC: Sending changed local info to peer.
15:13:46:43.231 EMC: Flare polling state restored because good generation number 0x0502 received.
15:13:46:43.240 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
15:13:46:43.248 Setting CPLD activity LED mode to AND because both sides being polled.
15:13:46:43.255 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
15:13:46:43.280 EMC: DISPLAY command success, encl number=01, mode=4.
15:13:46:43.302 EMC: Sending changed local info to peer.
15:13:46:43.316 EMC: Resynchronizing to Flare time: 1345652733 ms; timestamp adjusted to: 0 ms.
16:00:00:00.168 EMC: New Day 16
16:00:00:02.047 EMC: Resynchronizing to Flare time: 1382438827 ms; timestamp adjusted to: 0 ms.
17:00:00:00.237 EMC: New Day 17
17:00:00:00.466 EMC: Resynchronizing to Flare time: 1468886639 ms; timestamp adjusted to: 0 ms.
17:19:03:40.052 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
17:19:03:40.075 EMC: DISPLAY command success, encl number=01, mode=4.
17:19:03:40.381 Setting CPLD activity LED mode to OR because both sides not being polled.
17:19:03:43.633 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
17:19:03:43.645 EMC: DISPLAY command success, encl number=01, mode=4.
17:19:03:43.944 Setting CPLD activity LED mode to AND because both sides being polled.
18:00:00:00.253 EMC: New Day 18
18:00:00:02.012 EMC: Resynchronizing to Flare time: 1555288514 ms; timestamp adjusted to: 0 ms.
19:00:00:00.170 EMC: New Day 19
19:00:00:00.272 EMC: Resynchronizing to Flare time: 1641687139 ms; timestamp adjusted to: 0 ms.
20:00:00:00.376 EMC: New Day 20
20:00:00:01.888 EMC: Resynchronizing to Flare time: 1728088983 ms; timestamp adjusted to: 0 ms.
21:00:00:00.020 EMC: New Day 21
21:00:00:01.036 EMC: Resynchronizing to Flare time: 1814487577 ms; timestamp adjusted to: 0 ms.
22:00:00:00.380 EMC: New Day 22
22:00:00:03.072 EMC: Resynchronizing to Flare time: 1900889452 ms; timestamp adjusted to: 0 ms.
23:00:00:00.029 EMC: New Day 23
23:00:00:01.568 EMC: Resynchronizing to Flare time: 1987288046 ms; timestamp adjusted to: 0 ms.
23:09:55:13.031 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
23:09:55:13.038 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
23:09:55:13.045 Setting CPLD activity LED mode to OR because both sides not being polled.
23:09:55:13.054 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
23:09:55:13.077 EMC: DISPLAY command success, encl number=01, mode=C.
23:09:55:13.123 EMC: Sending changed local info to peer.
23:09:55:16.310 EMC: Flare polling state restored because good generation number 0x0502 received.
23:09:55:16.318 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
23:09:55:16.326 Setting CPLD activity LED mode to AND because both sides being polled.
23:09:55:16.333 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
23:09:55:16.359 EMC: DISPLAY command success, encl number=01, mode=4.
23:09:55:16.394 EMC: Resynchronizing to Flare time: 2022951952 ms; timestamp adjusted to: 0 ms.
23:09:55:52.002 EMC: Sending changed local info to peer.
24:00:00:00.101 EMC: New Day 24
24:00:00:03.196 EMC: Resynchronizing to Flare time: 2073653827 ms; timestamp adjusted to: 0 ms.
25:00:00:00.134 EMC: New Day 25
25:00:00:01.681 EMC: Resynchronizing to Flare time: 2160088514 ms; timestamp adjusted to: 0 ms.
26:00:00:00.241 EMC: New Day 26
26:00:00:00.345 EMC: Resynchronizing to Flare time: 2246487139 ms; timestamp adjusted to: 0 ms.
27:00:00:00.071 EMC: New Day 27
27:00:00:02.374 EMC: Resynchronizing to Flare time: 2332888983 ms; timestamp adjusted to: 0 ms.
28:00:00:00.307 EMC: New Day 28
28:00:00:01.272 EMC: Resynchronizing to Flare time: 2419287577 ms; timestamp adjusted to: 0 ms.
29:00:00:00.015 EMC: New Day 29
29:00:00:03.139 EMC: Resynchronizing to Flare time: 2505689452 ms; timestamp adjusted to: 0 ms.
29:05:34:41.335 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
29:05:34:41.358 EMC: DISPLAY command success, encl number=01, mode=4.
29:05:34:41.664 Setting CPLD activity LED mode to OR because both sides not being polled.
29:05:34:44.548 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
29:05:34:44.571 EMC: DISPLAY command success, encl number=01, mode=4.
29:05:34:44.870 Setting CPLD activity LED mode to AND because both sides being polled.
30:00:00:00.127 EMC: New Day 30
30:00:00:01.578 EMC: Resynchronizing to Flare time: 2592088046 ms; timestamp adjusted to: 0 ms.
31:00:00:00.102 EMC: New Day 31
31:00:00:02.963 EMC: Resynchronizing to Flare time: 2678489921 ms; timestamp adjusted to: 0 ms.
32:00:00:00.206 EMC: New Day 32
32:00:00:01.804 EMC: Year 2012, Month 1
32:00:00:01.825 EMC: Resynchronizing to Flare time: 86488514 ms; timestamp adjusted to: 0 ms.
02:00:00:00.136 EMC: New Day 2
02:00:00:00.716 EMC: Resynchronizing to Flare time: 172887139 ms; timestamp adjusted to: 0 ms.
03:00:00:00.366 EMC: New Day 3
03:00:00:02.721 EMC: Resynchronizing to Flare time: 259288983 ms; timestamp adjusted to: 0 ms.
03:22:27:51.456 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
03:22:27:51.480 EMC: DISPLAY command success, encl number=01, mode=4.
03:22:27:51.793 Setting CPLD activity LED mode to OR because both sides not being polled.
03:22:27:55.003 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
03:22:27:55.027 EMC: DISPLAY command success, encl number=01, mode=4.
03:22:27:55.327 Setting CPLD activity LED mode to AND because both sides being polled.
04:00:00:00.705 EMC: New Day 4
04:00:00:00.903 EMC: Resynchronizing to Flare time: 345687577 ms; timestamp adjusted to: 0 ms.
05:00:00:00.196 EMC: New Day 5
05:00:00:02.295 EMC: Resynchronizing to Flare time: 432089452 ms; timestamp adjusted to: 0 ms.
06:00:00:00.149 EMC: New Day 6
06:00:00:01.247 EMC: Resynchronizing to Flare time: 518488046 ms; timestamp adjusted to: 0 ms.
07:00:00:00.033 EMC: New Day 7
07:00:00:00.294 EMC: Resynchronizing to Flare time: 604886639 ms; timestamp adjusted to: 0 ms.
08:00:00:00.291 EMC: New Day 8
08:00:00:02.045 EMC: Resynchronizing to Flare time: 691288514 ms; timestamp adjusted to: 0 ms.
09:00:00:00.261 EMC: New Day 9
09:00:00:00.929 EMC: Resynchronizing to Flare time: 777687108 ms; timestamp adjusted to: 0 ms.
                                                                                                                                                                 

Buffer Type: SXP Trace
Buffer Id: 0
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 49th at 17:03:03.
00:00:00:01:265 EMC: Setting Update lock: 1
00:00:00:01:399 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:420 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:440 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:460 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:482 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:502 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:507 EMC: Failed to get Power Supply revision info.
00:00:00:01:514 EMC: SXP FW Version:   04.05
00:00:00:01:518 EMC: SXP BOOT Version: 03.00
00:00:00:01:522 EMC: SXP ISTR Version: 03.05
00:00:00:01:526 EMC: MC Version:       16.01
00:00:00:01:531 EMC: DLMC Version:     14.47
00:00:00:01:535 EMC: PS Version:       00.01
00:00:00:01:539 EMC: CPLD Version:     00.09
00:00:00:01:543 EMC: Base SAS Address: 50060480_00b680c0
00:00:00:01:548 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:557 EMC: Exception flag read from register is 0
00:00:00:00:985 EMC: Setting enclosure number to 255
00:00:00:01:005 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:01:026 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:049 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:069 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:090 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:112 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:119 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:142 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:165 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:185 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:239 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:259 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:265 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:287 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:308 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:330 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:350 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:370 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:375 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:383 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:01:389 EMC: Checking for updated FW!
00:00:00:01:393 EMC: Checking for SXP FW download
00:00:00:01:420 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:01:435 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:01:440 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:15:669 WDG EXPIRED: Elapsed time since last WDG run: 799 ms
00:00:00:15:674 WDG: Pong not received from: EMA
                                              

Buffer Type: SXP Trace
Buffer Id: 1
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 946
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:15.7
00:00:00:01:264 EMC: Setting Update lock: 1
00:00:00:01:350 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:384 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:404 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:424 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:445 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:467 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:472 EMC: Failed to get Power Supply revision info.
00:00:00:01:478 EMC: SXP FW Version:   04.05
00:00:00:01:483 EMC: SXP BOOT Version: 03.00
00:00:00:01:487 EMC: SXP ISTR Version: 03.05
00:00:00:01:491 EMC: MC Version:       16.01
00:00:00:01:497 EMC: DLMC Version:     14.47
00:00:00:01:501 EMC: PS Version:       00.01
00:00:00:01:505 EMC: CPLD Version:     00.13
00:00:00:15:768 WDG EXPIRED: Elapsed time since last WDG run: 229 ms
00:00:00:15:773 WDG: Pong not received from: EMA
                 

Buffer Type: SXP Trace
Buffer Id: 2
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:51.
00:00:00:01:263 EMC: Setting Update lock: 1
00:00:00:01:349 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:382 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:402 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:423 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:443 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:465 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:470 EMC: Failed to get Power Supply revision info.
00:00:00:01:476 EMC: SXP FW Version:   04.05
00:00:00:01:481 EMC: SXP BOOT Version: 03.00
00:00:00:01:485 EMC: SXP ISTR Version: 03.05
00:00:00:01:489 EMC: MC Version:       16.01
00:00:00:01:493 EMC: DLMC Version:     14.47
00:00:00:01:498 EMC: PS Version:       00.01
00:00:00:01:502 EMC: CPLD Version:     00.13
00:00:00:01:506 EMC: Base SAS Address: 50060480_00fa80c0
00:00:00:01:510 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:520 EMC: Exception flag read from register is 1
00:00:00:36:984 EMC: Setting enclosure number to 255
00:00:00:37:003 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:37:046 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:068 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:089 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:109 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:130 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:136 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:160 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:183 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:204 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:225 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:269 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:274 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:298 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:321 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:342 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:363 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:385 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:390 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:397 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:37:404 EMC: Checking for updated FW!
00:00:00:37:408 EMC: Checking for SXP FW download
00:00:00:37:436 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:37:451 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:37:456 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:51:683 WDG EXPIRED: Elapsed time since last WDG run: 792 ms
00:00:00:51:688 WDG: Pong not received from: EMA
                                              

Buffer Type: Expander Ring Buffer Trace
Buffer Id: 255
Source: Manual
SXP Major Rev: 04
SXP Minor Rev: 30
Length: -1
Timestamp: 02/24/2012 17:25:13
        
30:00:00:03.476 EMC: Resynchronizing to Flare time: 2592090389 ms; timestamp adjusted to: 0 ms.
31:00:00:00.291 EMC: New Day 31
31:00:00:02.591 EMC: Resynchronizing to Flare time: 2678488983 ms; timestamp adjusted to: 0 ms.
31:11:05:54.241 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
31:11:05:54.263 EMC: DISPLAY command success, encl number=01, mode=4.
31:11:05:54.562 Setting CPLD activity LED mode to OR because both sides not being polled.
31:11:05:57.792 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
31:11:05:57.815 EMC: DISPLAY command success, encl number=01, mode=4.
31:11:05:58.121 Setting CPLD activity LED mode to AND because both sides being polled.
32:00:00:00.736 EMC: New Day 32
32:00:00:01.174 EMC: Year 2012, Month 2
32:00:00:01.194 EMC: Resynchronizing to Flare time: 86487577 ms; timestamp adjusted to: 0 ms.
02:00:00:00.174 EMC: New Day 2
02:00:00:02.821 EMC: Resynchronizing to Flare time: 172889452 ms; timestamp adjusted to: 0 ms.
02:11:00:08.360 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
02:11:00:08.368 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
02:11:00:08.375 Setting CPLD activity LED mode to OR because both sides not being polled.
02:11:00:08.384 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
02:11:00:08.406 EMC: DISPLAY command success, encl number=01, mode=C.
02:11:00:08.452 EMC: Sending changed local info to peer.
02:11:00:11.637 EMC: Flare polling state restored because good generation number 0x0502 received.
02:11:00:11.645 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
02:11:00:11.652 Setting CPLD activity LED mode to AND because both sides being polled.
02:11:00:11.660 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
02:11:00:11.693 EMC: DISPLAY command success, encl number=01, mode=4.
02:11:00:11.713 EMC: Sending changed local info to peer.
02:11:00:11.727 EMC: Resynchronizing to Flare time: 212451483 ms; timestamp adjusted to: 0 ms.
02:11:27:14.653 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
02:11:27:14.660 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
02:11:27:14.667 Setting CPLD activity LED mode to OR because both sides not being polled.
02:11:27:14.676 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
02:11:27:14.699 EMC: DISPLAY command success, encl number=01, mode=C.
02:11:27:14.743 EMC: Sending changed local info to peer.
02:11:27:17.931 EMC: Flare polling state restored because good generation number 0x0502 received.
02:11:27:17.939 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
02:11:27:17.947 Setting CPLD activity LED mode to AND because both sides being polled.
02:11:27:17.954 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
02:11:27:17.979 EMC: DISPLAY command success, encl number=01, mode=4.
02:11:27:19.847 EMC: Sending changed local info to peer.
03:00:00:00.235 EMC: New Day 3
03:00:00:03.272 EMC: Resynchronizing to Flare time: 259248671 ms; timestamp adjusted to: 0 ms.
04:00:00:00.321 EMC: New Day 4
04:00:00:03.121 EMC: Resynchronizing to Flare time: 345689921 ms; timestamp adjusted to: 0 ms.
05:00:00:00.262 EMC: New Day 5
05:00:00:02.022 EMC: Resynchronizing to Flare time: 432088514 ms; timestamp adjusted to: 0 ms.
06:00:00:00.045 EMC: New Day 6
06:00:00:00.475 EMC: Resynchronizing to Flare time: 518487108 ms; timestamp adjusted to: 0 ms.
06:03:26:41.224 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
06:03:26:41.248 EMC: DISPLAY command success, encl number=01, mode=4.
06:03:26:41.545 Setting CPLD activity LED mode to OR because both sides not being polled.
06:03:26:44.574 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
06:03:26:44.597 EMC: DISPLAY command success, encl number=01, mode=4.
06:03:26:44.602 EMC: ...read processing took 29 ms, status=Success
06:03:26:45.276 Setting CPLD activity LED mode to AND because both sides being polled.
06:03:26:55.723 EMC: ...read processing took 0 ms, status=Success
07:00:00:00.039 EMC: New Day 7
07:00:00:02.376 EMC: Resynchronizing to Flare time: 604888983 ms; timestamp adjusted to: 0 ms.
08:00:00:00.301 EMC: New Day 8
08:00:00:00.363 EMC: Resynchronizing to Flare time: 691287577 ms; timestamp adjusted to: 0 ms.
09:00:00:00.159 EMC: New Day 9
09:00:00:02.811 EMC: Resynchronizing to Flare time: 777689452 ms; timestamp adjusted to: 0 ms.
10:00:00:00.093 EMC: New Day 10
10:00:00:01.674 EMC: Resynchronizing to Flare time: 864088046 ms; timestamp adjusted to: 0 ms.
10:18:34:11.186 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
10:18:34:11.211 EMC: DISPLAY command success, encl number=01, mode=4.
10:18:34:11.522 Setting CPLD activity LED mode to OR because both sides not being polled.
10:18:34:14.445 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
10:18:34:14.471 EMC: DISPLAY command success, encl number=01, mode=4.
10:18:34:14.782 Setting CPLD activity LED mode to AND because both sides being polled.
11:00:00:00.286 EMC: New Day 11
11:00:00:00.480 EMC: Resynchronizing to Flare time: 950486639 ms; timestamp adjusted to: 0 ms.
11:07:51:50.010 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
11:07:51:50.017 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
11:07:51:50.024 Setting CPLD activity LED mode to OR because both sides not being polled.
11:07:51:50.033 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
11:07:51:50.056 EMC: DISPLAY command success, encl number=01, mode=C.
11:07:51:50.091 EMC: Sending changed local info to peer.
11:07:51:53.288 EMC: Flare polling state restored because good generation number 0x0502 received.
11:07:51:53.297 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
11:07:51:53.305 Setting CPLD activity LED mode to AND because both sides being polled.
11:07:51:53.312 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
11:07:51:53.341 EMC: Sending changed local info to peer.
11:07:51:53.343 EMC: DISPLAY command success, encl number=01, mode=4.
11:07:51:53.389 EMC: Resynchronizing to Flare time: 978741483 ms; timestamp adjusted to: 0 ms.
12:00:00:00.165 EMC: New Day 12
12:00:00:00.790 EMC: Resynchronizing to Flare time: 1036858983 ms; timestamp adjusted to: 0 ms.
12:10:40:21.856 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
12:10:40:21.879 EMC: DISPLAY command success, encl number=01, mode=4.
12:10:40:22.185 Setting CPLD activity LED mode to OR because both sides not being polled.
12:10:40:25.409 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
12:10:40:25.432 EMC: DISPLAY command success, encl number=01, mode=4.
12:10:40:25.731 Setting CPLD activity LED mode to AND because both sides being polled.
13:00:00:00.235 EMC: New Day 13
13:00:00:00.281 EMC: Resynchronizing to Flare time: 1123287108 ms; timestamp adjusted to: 0 ms.
13:01:26:46.984 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
13:01:26:47.007 EMC: DISPLAY command success, encl number=01, mode=4.
13:01:26:47.306 Setting CPLD activity LED mode to OR because both sides not being polled.
13:01:26:50.855 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
13:01:26:50.879 EMC: DISPLAY command success, encl number=01, mode=4.
13:01:26:51.177 Setting CPLD activity LED mode to AND because both sides being polled.
13:01:26:55.695 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
13:01:26:55.718 EMC: DISPLAY command success, encl number=01, mode=4.
13:01:26:56.017 Setting CPLD activity LED mode to OR because both sides not being polled.
13:01:26:58.593 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
13:01:26:58.615 EMC: DISPLAY command success, encl number=01, mode=4.
13:01:26:58.921 Setting CPLD activity LED mode to AND because both sides being polled.
14:00:00:00.241 EMC: New Day 14
14:00:00:02.056 EMC: Resynchronizing to Flare time: 1209688983 ms; timestamp adjusted to: 0 ms.
15:00:00:00.305 EMC: New Day 15
15:00:00:00.728 EMC: Resynchronizing to Flare time: 1296087577 ms; timestamp adjusted to: 0 ms.
16:00:00:00.455 EMC: New Day 16
16:00:00:02.776 EMC: Resynchronizing to Flare time: 1382489452 ms; timestamp adjusted to: 0 ms.
17:00:00:00.632 EMC: New Day 17
17:00:00:01.935 EMC: Resynchronizing to Flare time: 1468888046 ms; timestamp adjusted to: 0 ms.
18:00:00:00.000 EMC: New Day 18
18:00:00:00.222 EMC: Resynchronizing to Flare time: 1555286639 ms; timestamp adjusted to: 0 ms.
18:02:15:47.180 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
18:02:15:47.188 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
18:02:15:47.195 Setting CPLD activity LED mode to OR because both sides not being polled.
18:02:15:47.205 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
18:02:15:47.227 EMC: DISPLAY command success, encl number=01, mode=C.
18:02:15:47.271 EMC: Sending changed local info to peer.
18:02:15:50.458 EMC: Flare polling state restored because good generation number 0x0502 received.
18:02:15:50.466 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
18:02:15:50.474 Setting CPLD activity LED mode to AND because both sides being polled.
18:02:15:50.481 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
18:02:15:50.509 EMC: DISPLAY command success, encl number=01, mode=4.
18:02:15:50.529 EMC: Sending changed local info to peer.
18:02:15:50.544 EMC: Resynchronizing to Flare time: 1563358514 ms; timestamp adjusted to: 0 ms.
18:11:31:01.176 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
18:11:31:01.199 EMC: DISPLAY command success, encl number=01, mode=4.
18:11:31:01.505 Setting CPLD activity LED mode to OR because both sides not being polled.
18:11:31:04.742 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
18:11:31:04.754 EMC: DISPLAY command success, encl number=01, mode=4.
18:11:31:05.053 Setting CPLD activity LED mode to AND because both sides being polled.
19:00:00:00.116 EMC: New Day 19
19:00:00:03.114 EMC: Resynchronizing to Flare time: 1641681952 ms; timestamp adjusted to: 0 ms.
20:00:00:00.317 EMC: New Day 20
20:00:00:03.200 EMC: Resynchronizing to Flare time: 1728090389 ms; timestamp adjusted to: 0 ms.
21:00:00:00.558 EMC: New Day 21
21:00:00:02.132 EMC: Resynchronizing to Flare time: 1814488983 ms; timestamp adjusted to: 0 ms.
22:00:00:00.795 EMC: New Day 22
22:00:00:01.120 EMC: Resynchronizing to Flare time: 1900887577 ms; timestamp adjusted to: 0 ms.
22:18:12:58.110 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
22:18:12:58.116 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
22:18:12:58.124 Setting CPLD activity LED mode to OR because both sides not being polled.
22:18:12:58.133 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
22:18:12:58.156 EMC: DISPLAY command success, encl number=01, mode=C.
22:18:12:58.199 EMC: Sending changed local info to peer.
22:18:13:01.389 EMC: Flare polling state restored because good generation number 0x0502 received.
22:18:13:01.398 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
22:18:13:01.405 Setting CPLD activity LED mode to AND because both sides being polled.
22:18:13:01.413 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
22:18:13:01.436 EMC: DISPLAY command success, encl number=01, mode=4.
22:18:13:01.458 EMC: Resynchronizing to Flare time: 1966446952 ms; timestamp adjusted to: 0 ms.
22:18:14:07.233 EMC: Sending changed local info to peer.
23:00:00:00.358 EMC: New Day 23
23:00:00:02.906 EMC: Resynchronizing to Flare time: 1987223827 ms; timestamp adjusted to: 0 ms.
24:00:00:00.225 EMC: New Day 24
24:00:00:01.375 EMC: Resynchronizing to Flare time: 2073688046 ms; timestamp adjusted to: 0 ms.
                                                                                                                                                                 

Buffer Type: SXP Trace
Buffer Id: 0
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 49th at 17:03:03.
00:00:00:01:265 EMC: Setting Update lock: 1
00:00:00:01:399 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:420 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:440 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:460 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:482 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:502 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:507 EMC: Failed to get Power Supply revision info.
00:00:00:01:514 EMC: SXP FW Version:   04.05
00:00:00:01:518 EMC: SXP BOOT Version: 03.00
00:00:00:01:522 EMC: SXP ISTR Version: 03.05
00:00:00:01:526 EMC: MC Version:       16.01
00:00:00:01:531 EMC: DLMC Version:     14.47
00:00:00:01:535 EMC: PS Version:       00.01
00:00:00:01:539 EMC: CPLD Version:     00.09
00:00:00:01:543 EMC: Base SAS Address: 50060480_00b680c0
00:00:00:01:548 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:557 EMC: Exception flag read from register is 0
00:00:00:00:985 EMC: Setting enclosure number to 255
00:00:00:01:005 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:01:026 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:049 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:069 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:090 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:112 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:119 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:142 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:165 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:185 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:239 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:259 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:265 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:287 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:308 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:330 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:350 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:370 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:375 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:383 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:01:389 EMC: Checking for updated FW!
00:00:00:01:393 EMC: Checking for SXP FW download
00:00:00:01:420 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:01:435 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:01:440 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:15:669 WDG EXPIRED: Elapsed time since last WDG run: 799 ms
00:00:00:15:674 WDG: Pong not received from: EMA
                                              

Buffer Type: SXP Trace
Buffer Id: 1
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 946
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:15.7
00:00:00:01:264 EMC: Setting Update lock: 1
00:00:00:01:350 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:384 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:404 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:424 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:445 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:467 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:472 EMC: Failed to get Power Supply revision info.
00:00:00:01:478 EMC: SXP FW Version:   04.05
00:00:00:01:483 EMC: SXP BOOT Version: 03.00
00:00:00:01:487 EMC: SXP ISTR Version: 03.05
00:00:00:01:491 EMC: MC Version:       16.01
00:00:00:01:497 EMC: DLMC Version:     14.47
00:00:00:01:501 EMC: PS Version:       00.01
00:00:00:01:505 EMC: CPLD Version:     00.13
00:00:00:15:768 WDG EXPIRED: Elapsed time since last WDG run: 229 ms
00:00:00:15:773 WDG: Pong not received from: EMA
                 

Buffer Type: SXP Trace
Buffer Id: 2
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:51.
00:00:00:01:263 EMC: Setting Update lock: 1
00:00:00:01:349 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:382 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:402 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:423 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:443 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:465 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:470 EMC: Failed to get Power Supply revision info.
00:00:00:01:476 EMC: SXP FW Version:   04.05
00:00:00:01:481 EMC: SXP BOOT Version: 03.00
00:00:00:01:485 EMC: SXP ISTR Version: 03.05
00:00:00:01:489 EMC: MC Version:       16.01
00:00:00:01:493 EMC: DLMC Version:     14.47
00:00:00:01:498 EMC: PS Version:       00.01
00:00:00:01:502 EMC: CPLD Version:     00.13
00:00:00:01:506 EMC: Base SAS Address: 50060480_00fa80c0
00:00:00:01:510 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:520 EMC: Exception flag read from register is 1
00:00:00:36:984 EMC: Setting enclosure number to 255
00:00:00:37:003 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:37:046 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:068 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:089 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:109 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:130 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:136 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:160 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:183 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:204 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:225 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:269 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:274 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:298 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:321 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:342 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:363 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:385 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:390 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:397 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:37:404 EMC: Checking for updated FW!
00:00:00:37:408 EMC: Checking for SXP FW download
00:00:00:37:436 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:37:451 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:37:456 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:51:683 WDG EXPIRED: Elapsed time since last WDG run: 792 ms
00:00:00:51:688 WDG: Pong not received from: EMA
                                              

Buffer Type: Expander Ring Buffer Trace
Buffer Id: 255
Source: Manual
SXP Major Rev: 04
SXP Minor Rev: 30
Length: -1
Timestamp: 03/13/2012 15:25:15
        
10:18:34:11.186 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
10:18:34:11.211 EMC: DISPLAY command success, encl number=01, mode=4.
10:18:34:11.522 Setting CPLD activity LED mode to OR because both sides not being polled.
10:18:34:14.445 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
10:18:34:14.471 EMC: DISPLAY command success, encl number=01, mode=4.
10:18:34:14.782 Setting CPLD activity LED mode to AND because both sides being polled.
11:00:00:00.286 EMC: New Day 11
11:00:00:00.480 EMC: Resynchronizing to Flare time: 950486639 ms; timestamp adjusted to: 0 ms.
11:07:51:50.010 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
11:07:51:50.017 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
11:07:51:50.024 Setting CPLD activity LED mode to OR because both sides not being polled.
11:07:51:50.033 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
11:07:51:50.056 EMC: DISPLAY command success, encl number=01, mode=C.
11:07:51:50.091 EMC: Sending changed local info to peer.
11:07:51:53.288 EMC: Flare polling state restored because good generation number 0x0502 received.
11:07:51:53.297 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
11:07:51:53.305 Setting CPLD activity LED mode to AND because both sides being polled.
11:07:51:53.312 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
11:07:51:53.341 EMC: Sending changed local info to peer.
11:07:51:53.343 EMC: DISPLAY command success, encl number=01, mode=4.
11:07:51:53.389 EMC: Resynchronizing to Flare time: 978741483 ms; timestamp adjusted to: 0 ms.
12:00:00:00.165 EMC: New Day 12
12:00:00:00.790 EMC: Resynchronizing to Flare time: 1036858983 ms; timestamp adjusted to: 0 ms.
12:10:40:21.856 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
12:10:40:21.879 EMC: DISPLAY command success, encl number=01, mode=4.
12:10:40:22.185 Setting CPLD activity LED mode to OR because both sides not being polled.
12:10:40:25.409 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
12:10:40:25.432 EMC: DISPLAY command success, encl number=01, mode=4.
12:10:40:25.731 Setting CPLD activity LED mode to AND because both sides being polled.
13:00:00:00.235 EMC: New Day 13
13:00:00:00.281 EMC: Resynchronizing to Flare time: 1123287108 ms; timestamp adjusted to: 0 ms.
13:01:26:46.984 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
13:01:26:47.007 EMC: DISPLAY command success, encl number=01, mode=4.
13:01:26:47.306 Setting CPLD activity LED mode to OR because both sides not being polled.
13:01:26:50.855 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
13:01:26:50.879 EMC: DISPLAY command success, encl number=01, mode=4.
13:01:26:51.177 Setting CPLD activity LED mode to AND because both sides being polled.
13:01:26:55.695 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
13:01:26:55.718 EMC: DISPLAY command success, encl number=01, mode=4.
13:01:26:56.017 Setting CPLD activity LED mode to OR because both sides not being polled.
13:01:26:58.593 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
13:01:26:58.615 EMC: DISPLAY command success, encl number=01, mode=4.
13:01:26:58.921 Setting CPLD activity LED mode to AND because both sides being polled.
14:00:00:00.241 EMC: New Day 14
14:00:00:02.056 EMC: Resynchronizing to Flare time: 1209688983 ms; timestamp adjusted to: 0 ms.
15:00:00:00.305 EMC: New Day 15
15:00:00:00.728 EMC: Resynchronizing to Flare time: 1296087577 ms; timestamp adjusted to: 0 ms.
16:00:00:00.455 EMC: New Day 16
16:00:00:02.776 EMC: Resynchronizing to Flare time: 1382489452 ms; timestamp adjusted to: 0 ms.
17:00:00:00.632 EMC: New Day 17
17:00:00:01.935 EMC: Resynchronizing to Flare time: 1468888046 ms; timestamp adjusted to: 0 ms.
18:00:00:00.000 EMC: New Day 18
18:00:00:00.222 EMC: Resynchronizing to Flare time: 1555286639 ms; timestamp adjusted to: 0 ms.
18:02:15:47.180 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
18:02:15:47.188 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
18:02:15:47.195 Setting CPLD activity LED mode to OR because both sides not being polled.
18:02:15:47.205 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
18:02:15:47.227 EMC: DISPLAY command success, encl number=01, mode=C.
18:02:15:47.271 EMC: Sending changed local info to peer.
18:02:15:50.458 EMC: Flare polling state restored because good generation number 0x0502 received.
18:02:15:50.466 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
18:02:15:50.474 Setting CPLD activity LED mode to AND because both sides being polled.
18:02:15:50.481 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
18:02:15:50.509 EMC: DISPLAY command success, encl number=01, mode=4.
18:02:15:50.529 EMC: Sending changed local info to peer.
18:02:15:50.544 EMC: Resynchronizing to Flare time: 1563358514 ms; timestamp adjusted to: 0 ms.
18:11:31:01.176 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
18:11:31:01.199 EMC: DISPLAY command success, encl number=01, mode=4.
18:11:31:01.505 Setting CPLD activity LED mode to OR because both sides not being polled.
18:11:31:04.742 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
18:11:31:04.754 EMC: DISPLAY command success, encl number=01, mode=4.
18:11:31:05.053 Setting CPLD activity LED mode to AND because both sides being polled.
19:00:00:00.116 EMC: New Day 19
19:00:00:03.114 EMC: Resynchronizing to Flare time: 1641681952 ms; timestamp adjusted to: 0 ms.
20:00:00:00.317 EMC: New Day 20
20:00:00:03.200 EMC: Resynchronizing to Flare time: 1728090389 ms; timestamp adjusted to: 0 ms.
21:00:00:00.558 EMC: New Day 21
21:00:00:02.132 EMC: Resynchronizing to Flare time: 1814488983 ms; timestamp adjusted to: 0 ms.
22:00:00:00.795 EMC: New Day 22
22:00:00:01.120 EMC: Resynchronizing to Flare time: 1900887577 ms; timestamp adjusted to: 0 ms.
22:18:12:58.110 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
22:18:12:58.116 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
22:18:12:58.124 Setting CPLD activity LED mode to OR because both sides not being polled.
22:18:12:58.133 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
22:18:12:58.156 EMC: DISPLAY command success, encl number=01, mode=C.
22:18:12:58.199 EMC: Sending changed local info to peer.
22:18:13:01.389 EMC: Flare polling state restored because good generation number 0x0502 received.
22:18:13:01.398 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
22:18:13:01.405 Setting CPLD activity LED mode to AND because both sides being polled.
22:18:13:01.413 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
22:18:13:01.436 EMC: DISPLAY command success, encl number=01, mode=4.
22:18:13:01.458 EMC: Resynchronizing to Flare time: 1966446952 ms; timestamp adjusted to: 0 ms.
22:18:14:07.233 EMC: Sending changed local info to peer.
23:00:00:00.358 EMC: New Day 23
23:00:00:02.906 EMC: Resynchronizing to Flare time: 1987223827 ms; timestamp adjusted to: 0 ms.
24:00:00:00.225 EMC: New Day 24
24:00:00:01.375 EMC: Resynchronizing to Flare time: 2073688046 ms; timestamp adjusted to: 0 ms.
24:17:26:30.896 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
24:17:26:30.910 EMC: DISPLAY command success, encl number=01, mode=4.
24:17:26:31.221 Setting CPLD activity LED mode to OR because both sides not being polled.
24:17:26:32.166 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
24:17:26:32.188 EMC: DISPLAY command success, encl number=01, mode=4.
24:17:26:32.475 Setting CPLD activity LED mode to AND because both sides being polled.
25:00:00:00.087 EMC: New Day 25
25:00:00:03.047 EMC: Resynchronizing to Flare time: 2160089921 ms; timestamp adjusted to: 0 ms.
26:00:00:00.195 EMC: New Day 26
26:00:00:02.089 EMC: Resynchronizing to Flare time: 2246488514 ms; timestamp adjusted to: 0 ms.
27:00:00:00.026 EMC: New Day 27
27:00:00:00.504 EMC: Resynchronizing to Flare time: 2332887139 ms; timestamp adjusted to: 0 ms.
27:11:06:23.067 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
27:11:06:23.074 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
27:11:06:23.081 Setting CPLD activity LED mode to OR because both sides not being polled.
27:11:06:23.091 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
27:11:06:23.114 EMC: DISPLAY command success, encl number=01, mode=C.
27:11:06:23.159 EMC: Sending changed local info to peer.
27:11:06:26.345 EMC: Flare polling state restored because good generation number 0x0502 received.
27:11:06:26.354 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
27:11:06:26.361 Setting CPLD activity LED mode to AND because both sides being polled.
27:11:06:26.368 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
27:11:06:26.395 EMC: Sending changed local info to peer.
27:11:06:26.405 EMC: DISPLAY command success, encl number=01, mode=4.
27:11:06:26.448 EMC: Resynchronizing to Flare time: 2372826483 ms; timestamp adjusted to: 0 ms.
28:00:00:00.261 EMC: New Day 28
28:00:00:03.018 EMC: Resynchronizing to Flare time: 2419249608 ms; timestamp adjusted to: 0 ms.
29:00:00:00.253 EMC: New Day 29
29:00:00:00.932 EMC: Resynchronizing to Flare time: 2505687577 ms; timestamp adjusted to: 0 ms.
30:00:00:00.100 EMC: New Day 30
30:00:00:02.869 EMC: Year 2012, Month 3
30:00:00:02.889 EMC: Resynchronizing to Flare time: 86489452 ms; timestamp adjusted to: 0 ms.
02:00:00:00.126 EMC: New Day 2
02:00:00:01.154 EMC: Resynchronizing to Flare time: 172888046 ms; timestamp adjusted to: 0 ms.
03:00:00:00.198 EMC: New Day 3
03:00:00:03.141 EMC: Resynchronizing to Flare time: 259289921 ms; timestamp adjusted to: 0 ms.
04:00:00:00.436 EMC: New Day 4
04:00:00:01.904 EMC: Resynchronizing to Flare time: 345688514 ms; timestamp adjusted to: 0 ms.
05:00:00:00.218 EMC: New Day 5
05:00:00:00.450 EMC: Resynchronizing to Flare time: 432087108 ms; timestamp adjusted to: 0 ms.
05:20:11:16.195 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
05:20:11:16.218 EMC: DISPLAY command success, encl number=01, mode=4.
05:20:11:16.525 Setting CPLD activity LED mode to OR because both sides not being polled.
05:20:11:19.515 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
05:20:11:19.540 EMC: DISPLAY command success, encl number=01, mode=4.
05:20:11:19.545 EMC: ...read processing took 31 ms, status=Success
05:20:11:20.530 Setting CPLD activity LED mode to AND because both sides being polled.
06:00:00:00.292 EMC: New Day 6
06:00:00:02.608 EMC: Resynchronizing to Flare time: 518488983 ms; timestamp adjusted to: 0 ms.
07:00:00:00.132 EMC: New Day 7
07:00:00:00.993 EMC: Resynchronizing to Flare time: 604887577 ms; timestamp adjusted to: 0 ms.
08:00:00:00.101 EMC: New Day 8
08:00:00:02.376 EMC: Resynchronizing to Flare time: 691289452 ms; timestamp adjusted to: 0 ms.
09:00:00:00.294 EMC: New Day 9
09:00:00:01.208 EMC: Resynchronizing to Flare time: 777688046 ms; timestamp adjusted to: 0 ms.
10:00:00:00.325 EMC: New Day 10
10:00:00:03.272 EMC: Resynchronizing to Flare time: 864089921 ms; timestamp adjusted to: 0 ms.
11:00:00:00.133 EMC: New Day 11
11:00:00:02.294 EMC: Resynchronizing to Flare time: 950488514 ms; timestamp adjusted to: 0 ms.
12:00:00:00.243 EMC: New Day 12
12:00:00:00.610 EMC: Resynchronizing to Flare time: 1036887108 ms; timestamp adjusted to: 0 ms.
13:00:00:00.061 EMC: New Day 13
13:00:00:02.306 EMC: Resynchronizing to Flare time: 1123288983 ms; timestamp adjusted to: 0 ms.
                                                                                                                                                                 

Buffer Type: SXP Trace
Buffer Id: 0
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 49th at 17:03:03.
00:00:00:01:265 EMC: Setting Update lock: 1
00:00:00:01:399 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:420 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:440 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:460 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:482 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:502 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:507 EMC: Failed to get Power Supply revision info.
00:00:00:01:514 EMC: SXP FW Version:   04.05
00:00:00:01:518 EMC: SXP BOOT Version: 03.00
00:00:00:01:522 EMC: SXP ISTR Version: 03.05
00:00:00:01:526 EMC: MC Version:       16.01
00:00:00:01:531 EMC: DLMC Version:     14.47
00:00:00:01:535 EMC: PS Version:       00.01
00:00:00:01:539 EMC: CPLD Version:     00.09
00:00:00:01:543 EMC: Base SAS Address: 50060480_00b680c0
00:00:00:01:548 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:557 EMC: Exception flag read from register is 0
00:00:00:00:985 EMC: Setting enclosure number to 255
00:00:00:01:005 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:01:026 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:049 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:069 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:090 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:112 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:119 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:142 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:165 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:185 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:239 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:259 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:265 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:287 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:308 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:330 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:350 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:370 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:375 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:383 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:01:389 EMC: Checking for updated FW!
00:00:00:01:393 EMC: Checking for SXP FW download
00:00:00:01:420 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:01:435 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:01:440 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:15:669 WDG EXPIRED: Elapsed time since last WDG run: 799 ms
00:00:00:15:674 WDG: Pong not received from: EMA
                                              

Buffer Type: SXP Trace
Buffer Id: 1
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 946
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:15.7
00:00:00:01:264 EMC: Setting Update lock: 1
00:00:00:01:350 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:384 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:404 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:424 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:445 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:467 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:472 EMC: Failed to get Power Supply revision info.
00:00:00:01:478 EMC: SXP FW Version:   04.05
00:00:00:01:483 EMC: SXP BOOT Version: 03.00
00:00:00:01:487 EMC: SXP ISTR Version: 03.05
00:00:00:01:491 EMC: MC Version:       16.01
00:00:00:01:497 EMC: DLMC Version:     14.47
00:00:00:01:501 EMC: PS Version:       00.01
00:00:00:01:505 EMC: CPLD Version:     00.13
00:00:00:15:768 WDG EXPIRED: Elapsed time since last WDG run: 229 ms
00:00:00:15:773 WDG: Pong not received from: EMA
                 

Buffer Type: SXP Trace
Buffer Id: 2
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:51.
00:00:00:01:263 EMC: Setting Update lock: 1
00:00:00:01:349 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:382 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:402 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:423 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:443 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:465 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:470 EMC: Failed to get Power Supply revision info.
00:00:00:01:476 EMC: SXP FW Version:   04.05
00:00:00:01:481 EMC: SXP BOOT Version: 03.00
00:00:00:01:485 EMC: SXP ISTR Version: 03.05
00:00:00:01:489 EMC: MC Version:       16.01
00:00:00:01:493 EMC: DLMC Version:     14.47
00:00:00:01:498 EMC: PS Version:       00.01
00:00:00:01:502 EMC: CPLD Version:     00.13
00:00:00:01:506 EMC: Base SAS Address: 50060480_00fa80c0
00:00:00:01:510 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:520 EMC: Exception flag read from register is 1
00:00:00:36:984 EMC: Setting enclosure number to 255
00:00:00:37:003 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:37:046 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:068 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:089 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:109 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:130 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:136 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:160 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:183 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:204 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:225 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:269 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:274 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:298 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:321 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:342 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:363 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:385 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:390 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:397 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:37:404 EMC: Checking for updated FW!
00:00:00:37:408 EMC: Checking for SXP FW download
00:00:00:37:436 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:37:451 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:37:456 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:51:683 WDG EXPIRED: Elapsed time since last WDG run: 792 ms
00:00:00:51:688 WDG: Pong not received from: EMA
                                              

Buffer Type: Expander Ring Buffer Trace
Buffer Id: 255
Source: Manual
SXP Major Rev: 04
SXP Minor Rev: 30
Length: -1
Timestamp: 04/12/2012 15:25:16
        
22:18:14:07.233 EMC: Sending changed local info to peer.
23:00:00:00.358 EMC: New Day 23
23:00:00:02.906 EMC: Resynchronizing to Flare time: 1987223827 ms; timestamp adjusted to: 0 ms.
24:00:00:00.225 EMC: New Day 24
24:00:00:01.375 EMC: Resynchronizing to Flare time: 2073688046 ms; timestamp adjusted to: 0 ms.
24:17:26:30.896 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
24:17:26:30.910 EMC: DISPLAY command success, encl number=01, mode=4.
24:17:26:31.221 Setting CPLD activity LED mode to OR because both sides not being polled.
24:17:26:32.166 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
24:17:26:32.188 EMC: DISPLAY command success, encl number=01, mode=4.
24:17:26:32.475 Setting CPLD activity LED mode to AND because both sides being polled.
25:00:00:00.087 EMC: New Day 25
25:00:00:03.047 EMC: Resynchronizing to Flare time: 2160089921 ms; timestamp adjusted to: 0 ms.
26:00:00:00.195 EMC: New Day 26
26:00:00:02.089 EMC: Resynchronizing to Flare time: 2246488514 ms; timestamp adjusted to: 0 ms.
27:00:00:00.026 EMC: New Day 27
27:00:00:00.504 EMC: Resynchronizing to Flare time: 2332887139 ms; timestamp adjusted to: 0 ms.
27:11:06:23.067 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
27:11:06:23.074 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
27:11:06:23.081 Setting CPLD activity LED mode to OR because both sides not being polled.
27:11:06:23.091 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
27:11:06:23.114 EMC: DISPLAY command success, encl number=01, mode=C.
27:11:06:23.159 EMC: Sending changed local info to peer.
27:11:06:26.345 EMC: Flare polling state restored because good generation number 0x0502 received.
27:11:06:26.354 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
27:11:06:26.361 Setting CPLD activity LED mode to AND because both sides being polled.
27:11:06:26.368 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
27:11:06:26.395 EMC: Sending changed local info to peer.
27:11:06:26.405 EMC: DISPLAY command success, encl number=01, mode=4.
27:11:06:26.448 EMC: Resynchronizing to Flare time: 2372826483 ms; timestamp adjusted to: 0 ms.
28:00:00:00.261 EMC: New Day 28
28:00:00:03.018 EMC: Resynchronizing to Flare time: 2419249608 ms; timestamp adjusted to: 0 ms.
29:00:00:00.253 EMC: New Day 29
29:00:00:00.932 EMC: Resynchronizing to Flare time: 2505687577 ms; timestamp adjusted to: 0 ms.
30:00:00:00.100 EMC: New Day 30
30:00:00:02.869 EMC: Year 2012, Month 3
30:00:00:02.889 EMC: Resynchronizing to Flare time: 86489452 ms; timestamp adjusted to: 0 ms.
02:00:00:00.126 EMC: New Day 2
02:00:00:01.154 EMC: Resynchronizing to Flare time: 172888046 ms; timestamp adjusted to: 0 ms.
03:00:00:00.198 EMC: New Day 3
03:00:00:03.141 EMC: Resynchronizing to Flare time: 259289921 ms; timestamp adjusted to: 0 ms.
04:00:00:00.436 EMC: New Day 4
04:00:00:01.904 EMC: Resynchronizing to Flare time: 345688514 ms; timestamp adjusted to: 0 ms.
05:00:00:00.218 EMC: New Day 5
05:00:00:00.450 EMC: Resynchronizing to Flare time: 432087108 ms; timestamp adjusted to: 0 ms.
05:20:11:16.195 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
05:20:11:16.218 EMC: DISPLAY command success, encl number=01, mode=4.
05:20:11:16.525 Setting CPLD activity LED mode to OR because both sides not being polled.
05:20:11:19.515 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
05:20:11:19.540 EMC: DISPLAY command success, encl number=01, mode=4.
05:20:11:19.545 EMC: ...read processing took 31 ms, status=Success
05:20:11:20.530 Setting CPLD activity LED mode to AND because both sides being polled.
06:00:00:00.292 EMC: New Day 6
06:00:00:02.608 EMC: Resynchronizing to Flare time: 518488983 ms; timestamp adjusted to: 0 ms.
07:00:00:00.132 EMC: New Day 7
07:00:00:00.993 EMC: Resynchronizing to Flare time: 604887577 ms; timestamp adjusted to: 0 ms.
08:00:00:00.101 EMC: New Day 8
08:00:00:02.376 EMC: Resynchronizing to Flare time: 691289452 ms; timestamp adjusted to: 0 ms.
09:00:00:00.294 EMC: New Day 9
09:00:00:01.208 EMC: Resynchronizing to Flare time: 777688046 ms; timestamp adjusted to: 0 ms.
10:00:00:00.325 EMC: New Day 10
10:00:00:03.272 EMC: Resynchronizing to Flare time: 864089921 ms; timestamp adjusted to: 0 ms.
11:00:00:00.133 EMC: New Day 11
11:00:00:02.294 EMC: Resynchronizing to Flare time: 950488514 ms; timestamp adjusted to: 0 ms.
12:00:00:00.243 EMC: New Day 12
12:00:00:00.610 EMC: Resynchronizing to Flare time: 1036887108 ms; timestamp adjusted to: 0 ms.
13:00:00:00.061 EMC: New Day 13
13:00:00:02.306 EMC: Resynchronizing to Flare time: 1123288983 ms; timestamp adjusted to: 0 ms.
14:00:00:00.280 EMC: New Day 14
14:00:00:00.844 EMC: Resynchronizing to Flare time: 1209687577 ms; timestamp adjusted to: 0 ms.
15:00:00:00.611 EMC: New Day 15
15:00:00:02.787 EMC: Resynchronizing to Flare time: 1296089452 ms; timestamp adjusted to: 0 ms.
16:00:00:00.129 EMC: New Day 16
16:00:00:01.712 EMC: Resynchronizing to Flare time: 1382488046 ms; timestamp adjusted to: 0 ms.
17:00:00:00.122 EMC: New Day 17
17:00:00:03.180 EMC: Resynchronizing to Flare time: 1468889921 ms; timestamp adjusted to: 0 ms.
18:00:00:00.153 EMC: New Day 18
18:00:00:01.962 EMC: Resynchronizing to Flare time: 1555288514 ms; timestamp adjusted to: 0 ms.
18:20:26:26.092 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
18:20:26:26.115 EMC: DISPLAY command success, encl number=01, mode=4.
18:20:26:26.414 Setting CPLD activity LED mode to OR because both sides not being polled.
18:20:26:30.662 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
18:20:26:30.685 EMC: DISPLAY command success, encl number=01, mode=4.
18:20:26:30.690 EMC: ...read processing took 29 ms, status=Success
18:20:26:31.671 Setting CPLD activity LED mode to AND because both sides being polled.
18:20:26:34.288 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
18:20:26:34.314 EMC: DISPLAY command success, encl number=01, mode=4.
18:20:26:34.625 Setting CPLD activity LED mode to OR because both sides not being polled.
18:20:26:38.697 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
18:20:26:38.720 EMC: DISPLAY command success, encl number=01, mode=4.
18:20:26:39.027 Setting CPLD activity LED mode to AND because both sides being polled.
19:00:00:00.087 EMC: New Day 19
19:00:00:03.350 EMC: Resynchronizing to Flare time: 1641690389 ms; timestamp adjusted to: 0 ms.
20:00:00:00.036 EMC: New Day 20
20:00:00:02.101 EMC: Resynchronizing to Flare time: 1728088983 ms; timestamp adjusted to: 0 ms.
21:00:00:00.079 EMC: New Day 21
21:00:00:00.751 EMC: Resynchronizing to Flare time: 1814487577 ms; timestamp adjusted to: 0 ms.
22:00:00:00.284 EMC: New Day 22
22:00:00:03.121 EMC: Resynchronizing to Flare time: 1900889452 ms; timestamp adjusted to: 0 ms.
23:00:00:00.070 EMC: New Day 23
23:00:00:01.923 EMC: Resynchronizing to Flare time: 1987288046 ms; timestamp adjusted to: 0 ms.
24:00:00:00.110 EMC: New Day 24
24:00:00:03.129 EMC: Resynchronizing to Flare time: 2073689921 ms; timestamp adjusted to: 0 ms.
25:00:00:00.196 EMC: New Day 25
25:00:00:01.265 EMC: Resynchronizing to Flare time: 2160088514 ms; timestamp adjusted to: 0 ms.
26:00:00:00.301 EMC: New Day 26
26:00:00:03.478 EMC: Resynchronizing to Flare time: 2246490389 ms; timestamp adjusted to: 0 ms.
27:00:00:00.222 EMC: New Day 27
27:00:00:02.566 EMC: Resynchronizing to Flare time: 2332888983 ms; timestamp adjusted to: 0 ms.
28:00:00:00.193 EMC: New Day 28
28:00:00:01.282 EMC: Resynchronizing to Flare time: 2419287577 ms; timestamp adjusted to: 0 ms.
29:00:00:00.245 EMC: New Day 29
29:00:00:03.180 EMC: Resynchronizing to Flare time: 2505689452 ms; timestamp adjusted to: 0 ms.
30:00:00:00.311 EMC: New Day 30
30:00:00:01.142 EMC: Resynchronizing to Flare time: 2592088046 ms; timestamp adjusted to: 0 ms.
31:00:00:00.014 EMC: New Day 31
31:00:00:03.194 EMC: Resynchronizing to Flare time: 2678489921 ms; timestamp adjusted to: 0 ms.
32:00:00:00.020 EMC: New Day 32
32:00:00:01.838 EMC: Year 2012, Month 4
32:00:00:01.857 EMC: Resynchronizing to Flare time: 86488514 ms; timestamp adjusted to: 0 ms.
02:00:00:00.180 EMC: New Day 2
02:00:00:00.688 EMC: Resynchronizing to Flare time: 172887124 ms; timestamp adjusted to: 0 ms.
03:00:00:00.021 EMC: New Day 3
03:00:00:02.487 EMC: Resynchronizing to Flare time: 259288983 ms; timestamp adjusted to: 0 ms.
04:00:00:00.312 EMC: New Day 4
04:00:00:01.028 EMC: Resynchronizing to Flare time: 345687577 ms; timestamp adjusted to: 0 ms.
04:23:44:14.929 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
04:23:44:14.935 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
04:23:44:14.943 Setting CPLD activity LED mode to OR because both sides not being polled.
04:23:44:14.952 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
04:23:44:14.975 EMC: DISPLAY command success, encl number=01, mode=C.
04:23:44:15.018 EMC: Sending changed local info to peer.
04:23:44:18.205 EMC: Flare polling state restored because good generation number 0x0502 received.
04:23:44:18.213 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
04:23:44:18.220 Setting CPLD activity LED mode to AND because both sides being polled.
04:23:44:18.228 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
04:23:44:18.252 EMC: DISPLAY command success, encl number=01, mode=4.
04:23:44:18.272 EMC: Sending changed local info to peer.
04:23:44:18.288 EMC: Resynchronizing to Flare time: 431144452 ms; timestamp adjusted to: 0 ms.
05:00:00:00.221 EMC: New Day 5
06:00:00:00.232 EMC: New Day 6
06:00:00:01.177 EMC: Resynchronizing to Flare time: 518488046 ms; timestamp adjusted to: 0 ms.
07:00:00:00.161 EMC: New Day 7
07:00:00:03.342 EMC: Resynchronizing to Flare time: 604889921 ms; timestamp adjusted to: 0 ms.
08:00:00:00.160 EMC: New Day 8
08:00:00:01.917 EMC: Resynchronizing to Flare time: 691288514 ms; timestamp adjusted to: 0 ms.
09:00:00:00.111 EMC: New Day 9
09:00:00:00.526 EMC: Resynchronizing to Flare time: 777687108 ms; timestamp adjusted to: 0 ms.
09:13:20:22.371 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
09:13:20:22.394 EMC: DISPLAY command success, encl number=01, mode=4.
09:13:20:22.700 Setting CPLD activity LED mode to OR because both sides not being polled.
09:13:20:25.633 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
09:13:20:25.657 EMC: DISPLAY command success, encl number=01, mode=4.
09:13:20:25.957 Setting CPLD activity LED mode to AND because both sides being polled.
10:00:00:00.135 EMC: New Day 10
10:00:00:02.311 EMC: Resynchronizing to Flare time: 864088983 ms; timestamp adjusted to: 0 ms.
11:00:00:00.026 EMC: New Day 11
11:00:00:00.556 EMC: Resynchronizing to Flare time: 950487577 ms; timestamp adjusted to: 0 ms.
12:00:00:00.129 EMC: New Day 12
12:00:00:02.772 EMC: Resynchronizing to Flare time: 1036889452 ms; timestamp adjusted to: 0 ms.
12:15:24:25.897 EMC: DISPLAY command success, encl number=01, mode=C.
12:15:24:26.010 EMC: Sending changed local info to peer.
                                                                                                                                                                   

Buffer Type: SXP Trace
Buffer Id: 0
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 49th at 17:03:03.
00:00:00:01:265 EMC: Setting Update lock: 1
00:00:00:01:399 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:420 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:440 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:460 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:482 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:502 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:507 EMC: Failed to get Power Supply revision info.
00:00:00:01:514 EMC: SXP FW Version:   04.05
00:00:00:01:518 EMC: SXP BOOT Version: 03.00
00:00:00:01:522 EMC: SXP ISTR Version: 03.05
00:00:00:01:526 EMC: MC Version:       16.01
00:00:00:01:531 EMC: DLMC Version:     14.47
00:00:00:01:535 EMC: PS Version:       00.01
00:00:00:01:539 EMC: CPLD Version:     00.09
00:00:00:01:543 EMC: Base SAS Address: 50060480_00b680c0
00:00:00:01:548 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:557 EMC: Exception flag read from register is 0
00:00:00:00:985 EMC: Setting enclosure number to 255
00:00:00:01:005 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:01:026 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:049 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:069 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:090 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:112 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:119 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:142 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:165 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:185 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:239 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:259 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:265 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:287 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:308 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:330 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:350 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:370 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:375 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:383 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:01:389 EMC: Checking for updated FW!
00:00:00:01:393 EMC: Checking for SXP FW download
00:00:00:01:420 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:01:435 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:01:440 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:15:669 WDG EXPIRED: Elapsed time since last WDG run: 799 ms
00:00:00:15:674 WDG: Pong not received from: EMA
                                              

Buffer Type: SXP Trace
Buffer Id: 1
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 946
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:15.7
00:00:00:01:264 EMC: Setting Update lock: 1
00:00:00:01:350 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:384 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:404 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:424 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:445 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:467 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:472 EMC: Failed to get Power Supply revision info.
00:00:00:01:478 EMC: SXP FW Version:   04.05
00:00:00:01:483 EMC: SXP BOOT Version: 03.00
00:00:00:01:487 EMC: SXP ISTR Version: 03.05
00:00:00:01:491 EMC: MC Version:       16.01
00:00:00:01:497 EMC: DLMC Version:     14.47
00:00:00:01:501 EMC: PS Version:       00.01
00:00:00:01:505 EMC: CPLD Version:     00.13
00:00:00:15:768 WDG EXPIRED: Elapsed time since last WDG run: 229 ms
00:00:00:15:773 WDG: Pong not received from: EMA
                 

Buffer Type: SXP Trace
Buffer Id: 2
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:51.
00:00:00:01:263 EMC: Setting Update lock: 1
00:00:00:01:349 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:382 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:402 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:423 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:443 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:465 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:470 EMC: Failed to get Power Supply revision info.
00:00:00:01:476 EMC: SXP FW Version:   04.05
00:00:00:01:481 EMC: SXP BOOT Version: 03.00
00:00:00:01:485 EMC: SXP ISTR Version: 03.05
00:00:00:01:489 EMC: MC Version:       16.01
00:00:00:01:493 EMC: DLMC Version:     14.47
00:00:00:01:498 EMC: PS Version:       00.01
00:00:00:01:502 EMC: CPLD Version:     00.13
00:00:00:01:506 EMC: Base SAS Address: 50060480_00fa80c0
00:00:00:01:510 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:520 EMC: Exception flag read from register is 1
00:00:00:36:984 EMC: Setting enclosure number to 255
00:00:00:37:003 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:37:046 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:068 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:089 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:109 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:130 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:136 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:160 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:183 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:204 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:225 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:269 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:274 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:298 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:321 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:342 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:363 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:385 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:390 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:397 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:37:404 EMC: Checking for updated FW!
00:00:00:37:408 EMC: Checking for SXP FW download
00:00:00:37:436 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:37:451 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:37:456 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:51:683 WDG EXPIRED: Elapsed time since last WDG run: 792 ms
00:00:00:51:688 WDG: Pong not received from: EMA
                                              

Buffer Type: Expander Ring Buffer Trace
Buffer Id: 255
Source: Manual
SXP Major Rev: 04
SXP Minor Rev: 30
Length: -1
Timestamp: 04/20/2012 09:25:15
        
16:00:00:00.129 EMC: New Day 16
16:00:00:01.712 EMC: Resynchronizing to Flare time: 1382488046 ms; timestamp adjusted to: 0 ms.
17:00:00:00.122 EMC: New Day 17
17:00:00:03.180 EMC: Resynchronizing to Flare time: 1468889921 ms; timestamp adjusted to: 0 ms.
18:00:00:00.153 EMC: New Day 18
18:00:00:01.962 EMC: Resynchronizing to Flare time: 1555288514 ms; timestamp adjusted to: 0 ms.
18:20:26:26.092 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
18:20:26:26.115 EMC: DISPLAY command success, encl number=01, mode=4.
18:20:26:26.414 Setting CPLD activity LED mode to OR because both sides not being polled.
18:20:26:30.662 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
18:20:26:30.685 EMC: DISPLAY command success, encl number=01, mode=4.
18:20:26:30.690 EMC: ...read processing took 29 ms, status=Success
18:20:26:31.671 Setting CPLD activity LED mode to AND because both sides being polled.
18:20:26:34.288 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
18:20:26:34.314 EMC: DISPLAY command success, encl number=01, mode=4.
18:20:26:34.625 Setting CPLD activity LED mode to OR because both sides not being polled.
18:20:26:38.697 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
18:20:26:38.720 EMC: DISPLAY command success, encl number=01, mode=4.
18:20:26:39.027 Setting CPLD activity LED mode to AND because both sides being polled.
19:00:00:00.087 EMC: New Day 19
19:00:00:03.350 EMC: Resynchronizing to Flare time: 1641690389 ms; timestamp adjusted to: 0 ms.
20:00:00:00.036 EMC: New Day 20
20:00:00:02.101 EMC: Resynchronizing to Flare time: 1728088983 ms; timestamp adjusted to: 0 ms.
21:00:00:00.079 EMC: New Day 21
21:00:00:00.751 EMC: Resynchronizing to Flare time: 1814487577 ms; timestamp adjusted to: 0 ms.
22:00:00:00.284 EMC: New Day 22
22:00:00:03.121 EMC: Resynchronizing to Flare time: 1900889452 ms; timestamp adjusted to: 0 ms.
23:00:00:00.070 EMC: New Day 23
23:00:00:01.923 EMC: Resynchronizing to Flare time: 1987288046 ms; timestamp adjusted to: 0 ms.
24:00:00:00.110 EMC: New Day 24
24:00:00:03.129 EMC: Resynchronizing to Flare time: 2073689921 ms; timestamp adjusted to: 0 ms.
25:00:00:00.196 EMC: New Day 25
25:00:00:01.265 EMC: Resynchronizing to Flare time: 2160088514 ms; timestamp adjusted to: 0 ms.
26:00:00:00.301 EMC: New Day 26
26:00:00:03.478 EMC: Resynchronizing to Flare time: 2246490389 ms; timestamp adjusted to: 0 ms.
27:00:00:00.222 EMC: New Day 27
27:00:00:02.566 EMC: Resynchronizing to Flare time: 2332888983 ms; timestamp adjusted to: 0 ms.
28:00:00:00.193 EMC: New Day 28
28:00:00:01.282 EMC: Resynchronizing to Flare time: 2419287577 ms; timestamp adjusted to: 0 ms.
29:00:00:00.245 EMC: New Day 29
29:00:00:03.180 EMC: Resynchronizing to Flare time: 2505689452 ms; timestamp adjusted to: 0 ms.
30:00:00:00.311 EMC: New Day 30
30:00:00:01.142 EMC: Resynchronizing to Flare time: 2592088046 ms; timestamp adjusted to: 0 ms.
31:00:00:00.014 EMC: New Day 31
31:00:00:03.194 EMC: Resynchronizing to Flare time: 2678489921 ms; timestamp adjusted to: 0 ms.
32:00:00:00.020 EMC: New Day 32
32:00:00:01.838 EMC: Year 2012, Month 4
32:00:00:01.857 EMC: Resynchronizing to Flare time: 86488514 ms; timestamp adjusted to: 0 ms.
02:00:00:00.180 EMC: New Day 2
02:00:00:00.688 EMC: Resynchronizing to Flare time: 172887124 ms; timestamp adjusted to: 0 ms.
03:00:00:00.021 EMC: New Day 3
03:00:00:02.487 EMC: Resynchronizing to Flare time: 259288983 ms; timestamp adjusted to: 0 ms.
04:00:00:00.312 EMC: New Day 4
04:00:00:01.028 EMC: Resynchronizing to Flare time: 345687577 ms; timestamp adjusted to: 0 ms.
04:23:44:14.929 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
04:23:44:14.935 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
04:23:44:14.943 Setting CPLD activity LED mode to OR because both sides not being polled.
04:23:44:14.952 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
04:23:44:14.975 EMC: DISPLAY command success, encl number=01, mode=C.
04:23:44:15.018 EMC: Sending changed local info to peer.
04:23:44:18.205 EMC: Flare polling state restored because good generation number 0x0502 received.
04:23:44:18.213 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
04:23:44:18.220 Setting CPLD activity LED mode to AND because both sides being polled.
04:23:44:18.228 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
04:23:44:18.252 EMC: DISPLAY command success, encl number=01, mode=4.
04:23:44:18.272 EMC: Sending changed local info to peer.
04:23:44:18.288 EMC: Resynchronizing to Flare time: 431144452 ms; timestamp adjusted to: 0 ms.
05:00:00:00.221 EMC: New Day 5
06:00:00:00.232 EMC: New Day 6
06:00:00:01.177 EMC: Resynchronizing to Flare time: 518488046 ms; timestamp adjusted to: 0 ms.
07:00:00:00.161 EMC: New Day 7
07:00:00:03.342 EMC: Resynchronizing to Flare time: 604889921 ms; timestamp adjusted to: 0 ms.
08:00:00:00.160 EMC: New Day 8
08:00:00:01.917 EMC: Resynchronizing to Flare time: 691288514 ms; timestamp adjusted to: 0 ms.
09:00:00:00.111 EMC: New Day 9
09:00:00:00.526 EMC: Resynchronizing to Flare time: 777687108 ms; timestamp adjusted to: 0 ms.
09:13:20:22.371 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
09:13:20:22.394 EMC: DISPLAY command success, encl number=01, mode=4.
09:13:20:22.700 Setting CPLD activity LED mode to OR because both sides not being polled.
09:13:20:25.633 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
09:13:20:25.657 EMC: DISPLAY command success, encl number=01, mode=4.
09:13:20:25.957 Setting CPLD activity LED mode to AND because both sides being polled.
10:00:00:00.135 EMC: New Day 10
10:00:00:02.311 EMC: Resynchronizing to Flare time: 864088983 ms; timestamp adjusted to: 0 ms.
11:00:00:00.026 EMC: New Day 11
11:00:00:00.556 EMC: Resynchronizing to Flare time: 950487577 ms; timestamp adjusted to: 0 ms.
12:00:00:00.129 EMC: New Day 12
12:00:00:02.772 EMC: Resynchronizing to Flare time: 1036889452 ms; timestamp adjusted to: 0 ms.
12:15:24:25.837 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
12:15:24:25.845 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
12:15:24:25.853 Setting CPLD activity LED mode to OR because both sides not being polled.
12:15:24:25.863 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
12:15:24:25.897 EMC: DISPLAY command success, encl number=01, mode=C.
12:15:24:26.010 EMC: Sending changed local info to peer.
12:15:24:30.582 EMC: Flare polling state restored because good generation number 0x0502 received.
12:15:24:30.590 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
12:15:24:30.597 Setting CPLD activity LED mode to AND because both sides being polled.
12:15:24:30.605 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
12:15:24:30.630 EMC: Sending changed local info to peer.
12:15:24:30.641 EMC: DISPLAY command success, encl number=01, mode=4.
12:15:24:30.680 EMC: Resynchronizing to Flare time: 1092322577 ms; timestamp adjusted to: 0 ms.
12:15:25:31.851 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
12:15:25:31.858 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
12:15:25:31.865 Setting CPLD activity LED mode to OR because both sides not being polled.
12:15:25:31.874 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
12:15:25:31.896 EMC: DISPLAY command success, encl number=01, mode=C.
12:15:25:31.941 EMC: Sending changed local info to peer.
12:15:25:32.388 EMC: Flare polling state restored because good generation number 0x0502 received.
12:15:25:32.397 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
12:15:25:32.404 Setting CPLD activity LED mode to AND because both sides being polled.
12:15:25:32.412 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
12:15:25:32.435 EMC: DISPLAY command success, encl number=01, mode=4.
12:15:25:36.480 EMC: Sending changed local info to peer.
13:00:00:00.691 EMC: New Day 13
13:00:00:01.434 EMC: Resynchronizing to Flare time: 1123232264 ms; timestamp adjusted to: 0 ms.
13:10:13:11.658 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
13:10:13:11.665 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
13:10:13:11.672 Setting CPLD activity LED mode to OR because both sides not being polled.
13:10:13:11.681 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
13:10:13:11.693 EMC: DISPLAY command success, encl number=01, mode=C.
13:10:13:11.738 EMC: Sending changed local info to peer.
13:10:13:14.938 EMC: Flare polling state restored because good generation number 0x0502 received.
13:10:13:14.947 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
13:10:13:14.954 Setting CPLD activity LED mode to AND because both sides being polled.
13:10:13:14.962 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
13:10:13:14.985 EMC: DISPLAY command success, encl number=01, mode=4.
13:10:13:15.009 EMC: Resynchronizing to Flare time: 1160031483 ms; timestamp adjusted to: 0 ms.
13:10:13:51.710 EMC: Sending changed local info to peer.
14:00:00:00.046 EMC: New Day 14
14:00:00:00.735 EMC: Resynchronizing to Flare time: 1209650546 ms; timestamp adjusted to: 0 ms.
15:00:00:00.385 EMC: New Day 15
15:00:00:01.957 EMC: Resynchronizing to Flare time: 1296088514 ms; timestamp adjusted to: 0 ms.
16:00:00:00.264 EMC: New Day 16
16:00:00:00.357 EMC: Resynchronizing to Flare time: 1382487139 ms; timestamp adjusted to: 0 ms.
17:00:00:00.012 EMC: New Day 17
17:00:00:02.166 EMC: Resynchronizing to Flare time: 1468888983 ms; timestamp adjusted to: 0 ms.
18:00:00:00.005 EMC: New Day 18
18:00:00:00.999 EMC: Resynchronizing to Flare time: 1555287577 ms; timestamp adjusted to: 0 ms.
18:13:45:15.861 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
18:13:45:15.884 EMC: DISPLAY command success, encl number=01, mode=4.
18:13:45:16.190 Setting CPLD activity LED mode to OR because both sides not being polled.
18:13:45:19.410 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
18:13:45:19.432 EMC: DISPLAY command success, encl number=01, mode=4.
18:13:45:19.738 Setting CPLD activity LED mode to AND because both sides being polled.
19:00:00:00.074 EMC: New Day 19
19:00:00:03.095 EMC: Resynchronizing to Flare time: 1641689452 ms; timestamp adjusted to: 0 ms.
19:14:45:23.712 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
19:14:45:23.735 EMC: DISPLAY command success, encl number=01, mode=4.
19:14:45:24.043 Setting CPLD activity LED mode to OR because both sides not being polled.
19:14:45:26.921 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
19:14:45:26.944 EMC: DISPLAY command success, encl number=01, mode=4.
19:14:45:27.250 Setting CPLD activity LED mode to AND because both sides being polled.
20:00:00:00.541 EMC: New Day 20
20:00:00:01.630 EMC: Resynchronizing to Flare time: 1728088046 ms; timestamp adjusted to: 0 ms.
20:00:27:20.658 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
20:00:27:20.681 EMC: DISPLAY command success, encl number=01, mode=4.
20:00:27:20.994 Setting CPLD activity LED mode to OR because both sides not being polled.
20:00:27:24.222 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
20:00:27:24.246 EMC: DISPLAY command success, encl number=01, mode=4.
20:00:27:24.545 Setting CPLD activity LED mode to AND because both sides being polled.
                                                                                                                                                                 

Buffer Type: SXP Trace
Buffer Id: 0
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 49th at 17:03:03.
00:00:00:01:265 EMC: Setting Update lock: 1
00:00:00:01:399 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:420 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:440 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:460 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:482 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:502 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:507 EMC: Failed to get Power Supply revision info.
00:00:00:01:514 EMC: SXP FW Version:   04.05
00:00:00:01:518 EMC: SXP BOOT Version: 03.00
00:00:00:01:522 EMC: SXP ISTR Version: 03.05
00:00:00:01:526 EMC: MC Version:       16.01
00:00:00:01:531 EMC: DLMC Version:     14.47
00:00:00:01:535 EMC: PS Version:       00.01
00:00:00:01:539 EMC: CPLD Version:     00.09
00:00:00:01:543 EMC: Base SAS Address: 50060480_00b680c0
00:00:00:01:548 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:557 EMC: Exception flag read from register is 0
00:00:00:00:985 EMC: Setting enclosure number to 255
00:00:00:01:005 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:01:026 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:049 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:069 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:090 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:112 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:119 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:142 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:165 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:185 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:239 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:259 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:265 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:287 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:308 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:330 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:350 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:370 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:375 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:383 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:01:389 EMC: Checking for updated FW!
00:00:00:01:393 EMC: Checking for SXP FW download
00:00:00:01:420 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:01:435 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:01:440 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:15:669 WDG EXPIRED: Elapsed time since last WDG run: 799 ms
00:00:00:15:674 WDG: Pong not received from: EMA
                                              

Buffer Type: SXP Trace
Buffer Id: 1
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 946
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:15.7
00:00:00:01:264 EMC: Setting Update lock: 1
00:00:00:01:350 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:384 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:404 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:424 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:445 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:467 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:472 EMC: Failed to get Power Supply revision info.
00:00:00:01:478 EMC: SXP FW Version:   04.05
00:00:00:01:483 EMC: SXP BOOT Version: 03.00
00:00:00:01:487 EMC: SXP ISTR Version: 03.05
00:00:00:01:491 EMC: MC Version:       16.01
00:00:00:01:497 EMC: DLMC Version:     14.47
00:00:00:01:501 EMC: PS Version:       00.01
00:00:00:01:505 EMC: CPLD Version:     00.13
00:00:00:15:768 WDG EXPIRED: Elapsed time since last WDG run: 229 ms
00:00:00:15:773 WDG: Pong not received from: EMA
                 

Buffer Type: SXP Trace
Buffer Id: 2
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:51.
00:00:00:01:263 EMC: Setting Update lock: 1
00:00:00:01:349 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:382 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:402 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:423 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:443 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:465 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:470 EMC: Failed to get Power Supply revision info.
00:00:00:01:476 EMC: SXP FW Version:   04.05
00:00:00:01:481 EMC: SXP BOOT Version: 03.00
00:00:00:01:485 EMC: SXP ISTR Version: 03.05
00:00:00:01:489 EMC: MC Version:       16.01
00:00:00:01:493 EMC: DLMC Version:     14.47
00:00:00:01:498 EMC: PS Version:       00.01
00:00:00:01:502 EMC: CPLD Version:     00.13
00:00:00:01:506 EMC: Base SAS Address: 50060480_00fa80c0
00:00:00:01:510 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:520 EMC: Exception flag read from register is 1
00:00:00:36:984 EMC: Setting enclosure number to 255
00:00:00:37:003 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:37:046 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:068 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:089 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:109 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:130 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:136 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:160 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:183 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:204 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:225 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:269 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:274 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:298 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:321 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:342 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:363 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:385 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:390 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:397 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:37:404 EMC: Checking for updated FW!
00:00:00:37:408 EMC: Checking for SXP FW download
00:00:00:37:436 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:37:451 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:37:456 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:51:683 WDG EXPIRED: Elapsed time since last WDG run: 792 ms
00:00:00:51:688 WDG: Pong not received from: EMA
                                              

Buffer Type: Expander Ring Buffer Trace
Buffer Id: 255
Source: Manual
SXP Major Rev: 04
SXP Minor Rev: 30
Length: -1
Timestamp: 04/22/2012 01:19:02
        
00:00:00:01.294 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01.303 EMC: Exception flag read from register is 0
00:00:00:04.991 EMC: Setting enclosure number to 255
00:00:00:05.010 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:05.040 EMC: Setting unique ID to 0x3176A04B
00:00:00:05.045 EMC: Checking for updated FW!
00:00:00:05.049 EMC: Checking for SXP FW download
00:00:00:05.076 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:05.091 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:05.096 EMC: Checking MAIN SXP FW revs: actual: 4.30 flash: 4.30
00:00:00:05.589 EMC: Checking for MC/DLMC FW download
00:00:00:05.630 EMC: MC IN FLASH: revs - actual: 16.3 flash: 65535.65535
00:00:00:05.635 EMC: Not doing DLMC/MC download because Flash image invalid.
00:00:00:05.644 EMC: Getting Power Supply revision info addr=0.
00:00:00:05.664 EMC: Checking PS rev for 0$
00:00:00:05.668 EMC:     actual: 01.02 flash: 65535.65535
00:00:00:05.672 EMC: Not doing PS download: crc check: 0 ver check: 0
00:00:00:05.679 EMC: Checking80$CPLD revs: actual: 13 flash: -1
00:00:00:05.685 EMC: Not doing CPLD download: crc check: 0 ver check: 0
00:00:00:05.781 EMC: Getting Power Supply revision info addr=0.
00:00:00:05.802 EMC: Setting Update lock: 0
00:00:00:05.858 EMC: ENCLOSURE status going from OK to FAULTED
00:00:00:05.871 EMC: PEER POWER STATE going from OFF to ON
00:00:00:05.875 EMC: PEER INSERTED status going from NOT INSERTED to INSERTED
00:00:00:05.889 EMC: PEER STATE going from OFF to BOOTING
00:00:00:05.895 EMC: POWER B faulted going from OK to FAULTED
00:00:00:05.905 EMC: POWER B AC power fail going from OK to FAULTED
00:00:00:05.918 EMC: Drive 0 phy status going from NOT READY to READY
00:00:00:05.934 EMC: Drive 1 phy status going from NOT READY to READY
00:00:00:05.946 EMC: Drive 2 phy status going from NOT READY to READY
00:00:00:05.959 EMC: Drive 3 phy status going from NOT READY to READY
00:00:00:05.971 EMC: Drive 4 phy status going from NOT READY to READY
00:00:00:05.977 EMC: Drive 5 phy status going from NOT READY to READY
00:00:00:05.984 EMC: Drive 6 phy status going from NOT READY to READY
00:00:00:05.990 EMC: Drive 7 phy status going from NOT READY to READY
00:00:00:05.997 EMC: Drive 8 phy status going from NOT READY to READY
00:00:00:06.004 EMC: Drive 9 phy status going from NOT READY to READY
00:00:00:06.009 EMC: Drive 10 phy status going from NOT READY to READY
00:00:00:06.016 EMC: Drive 11 phy status going from NOT READY to READY
00:00:00:06.023 EMC: Downstream cable phy 0 status going from NOT READY to READY
00:00:00:06.032 EMC: Downstream cable phy 1 status going from NOT READY to READY
00:00:00:06.039 EMC: Downstream cable phy 2 status going from NOT READY to READY
00:00:00:06.048 EMC: Downstream cable phy 3 status going from NOT READY to READY
00:00:00:06.055 EMC: DRIVE 0 TYPE going from SATA to SAS
00:00:00:06.059 EMC: DRIVE 1 TYPE going from SATA to SAS
00:00:00:06.065 EMC: DRIVE 2 TYPE going from SATA to SAS
00:00:00:06.070 EMC: DRIVE 3 TYPE going from SATA to SAS
00:00:00:06.075 EMC: DRIVE 4 TYPE going from SATA to SAS
00:00:00:06.081 EMC: DRIVE 5 TYPE going from SATA to SAS
00:00:00:06.086 EMC: DRIVE 6 TYPE going from SATA to SAS
00:00:00:06.091 EMC: DRIVE 7 TYPE going from SATA to SAS
00:00:00:06.097 EMC: DRIVE 8 TYPE going from SATA to SAS
00:00:00:06.102 EMC: DRIVE 9 TYPE going from SATA to SAS
00:00:00:06.107 EMC: DRIVE 10 TYPE going from SATA to SAS
00:00:00:06.112 EMC: DRIVE 11 TYPE going from SATA to SAS
00:00:00:06.117 EMC: DRIVE 0 INSERT going from NOT INSERTED to INSERTED
00:00:00:06.123 EMC: DRIVE 1 INSERT going from NOT INSERTED to INSERTED
00:00:00:06.130 EMC: DRIVE 2 INSERT going from NOT INSERTED to INSERTED
00:00:00:06.136 EMC: DRIVE 3 INSERT going from NOT INSERTED to INSERTED
00:00:00:06.143 EMC: DRIVE 4 INSERT going from NOT INSERTED to INSERTED
00:00:00:06.149 EMC: DRIVE 5 INSERT going from NOT INSERTED to INSERTED
00:00:00:06.155 EMC: DRIVE 6 INSERT going from NOT INSERTED to INSERTED
00:00:00:06.161 EMC: DRIVE 7 INSERT going from NOT INSERTED to INSERTED
00:00:00:06.167 EMC: DRIVE 8 INSERT going from NOT INSERTED to INSERTED
00:00:00:06.174 EMC: DRIVE 9 INSERT going from NOT INSERTED to INSERTED
00:00:00:06.180 EMC: DRIVE 10 INSERT going from NOT INSERTED to INSERTED
00:00:00:06.186 EMC: DRIVE 11 INSERT going from NOT INSERTED to INSERTED
00:00:00:06.194 EMC: MISC STATUS HW Type going from 0 to 1
00:00:00:06.200 EMC: Detected downstream addr chg NONE to 50060489_703b0c7f.
00:00:00:06.209 EMC: Detected peer downstream addr chg NONE to INVALID.
00:00:00:06.214 EMC: Detected peer upstream addr chg NONE to INVALID.
00:00:00:06.223 EMC: Detected peer SSP addr chg NONE to INVALID.
00:00:00:06.228 EMC: PEER SIDE going from UNSUPPORTED to SIDE A
00:00:00:06.233 EMC: LED updater changing Upstream Fault LED from NO_CHANGE to OFF
00:00:00:06.241 EMC: LED updater changing Downstream Fault LED from NO_CHANGE to OFF
00:00:00:06.248 EMC: LED updater changing Upstream Conn LED from NO_CHANGE to OFF
00:00:00:06.257 EMC: LED updater changing Downstream Conn LED from NO_CHANGE to OFF
00:00:00:06.265 EMC: Writing LED command to MC: "L55555555"
00:00:00:06.335 EMC: LED updater changing slot 0 fault LED from NO_CHANGE to OFF.
00:00:00:06.343 EMC: LED updater changing slot 1 fault LED from NO_CHANGE to OFF.
00:00:00:06.350 EMC: LED updater changing slot 2 fault LED from NO_CHANGE to OFF.
00:00:00:06.358 EMC: LED updater changing slot 3 fault LED from NO_CHANGE to OFF.
00:00:00:06.365 EMC: LED updater changing slot 4 fault LED from NO_CHANGE to OFF.
00:00:00:06.373 EMC: LED updater changing slot 5 fault LED from NO_CHANGE to OFF.
00:00:00:06.380 EMC: LED updater changing slot 6 fault LED from NO_CHANGE to OFF.
00:00:00:06.388 EMC: LED updater changing slot 7 fault LED from NO_CHANGE to OFF.
00:00:00:06.395 EMC: LED updater changing slot 8 fault LED from NO_CHANGE to OFF.
00:00:00:06.403 EMC: LED updater changing slot 9 fault LED from NO_CHANGE to OFF.
00:00:00:06.410 EMC: LED updater changing slot 10 fault LED from NO_CHANGE to OFF.
00:00:00:06.417 EMC: LED updater changing slot 11 fault LED from NO_CHANGE to OFF.
00:00:00:06.424 EMC: LED updater changing slot 12 fault LED from NO_CHANGE to OFF.
00:00:00:06.431 EMC: LED updater changing slot 13 fault LED from NO_CHANGE to OFF.
00:00:00:06.438 EMC: LED updater changing slot 14 fault LED from NO_CHANGE to OFF.
00:00:00:06.445 EMC: Sending changed local info to peer.
00:00:00:07.334 EMC: ...read processing took 0 ms, status=Success
00:00:00:07.870 EMC: ...read processing took 0 ms, status=Success
00:00:00:09.030 EMC: ...write took 1155 ms, status=Retry
00:00:00:09.034 EMC: ...read processing took 0 ms, status=Success
00:00:00:09.684 EMC: ...write took 644 ms, status=Success
00:00:00:09.690 EMC: Force activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14
00:00:00:09.813 EMC: Downstream wide port: CONNECTED.
00:00:00:09.836 EMC: Setting downstream connectivity LED to ON because downstream connection found.
00:00:00:09.845 EMC: Expander requesting Downstream Conn LED change from OFF to ON
00:00:00:09.852 EMC: Setting upstream connectivity LED to FLASH because peer upstream connected but not me!
00:00:00:09.862 EMC: Expander requesting Upstream Conn LED change from OFF to FLASH
00:00:00:09.869 EMC: Expander requesting Encl LED change from OFF to ON
00:00:00:09.897 EMC: DOWNSTREAM PORT status going from UNCONNECTED to CONNECTED
00:00:00:09.906 EMC: Upstream cable phy 0 status going from NOT READY to READY
00:00:00:09.913 EMC: Upstream cable phy 1 status going from NOT READY to READY
00:00:00:09.922 EMC: Upstream cable phy 2 status going from NOT READY to READY
00:00:00:09.929 EMC: Upstream cable phy 3 status going from NOT READY to READY
00:00:00:09.939 EMC: Detected upstream addr chg NONE to 50060489_703ecaff.
00:00:00:09.947 EMC: Detected peer downstream addr chg INVALID to 50060489_703b0c3f.
00:00:00:09.956 EMC: Detected peer upstream addr chg INVALID to 50060489_703ecabf.
00:00:00:09.963 EMC: Detected peer SSP addr chg INVALID to 50060489_703b18be.
00:00:00:09.971 EMC: LED updater changing Upstream Conn LED from OFF to FLASH
00:00:00:09.977 EMC: LED updater changing Downstream Conn LED from OFF to ON
00:00:00:09.986 EMC: Writing LED command to MC: "L55B95555"
00:00:00:10.055 EMC: Sending changed local info to peer.
00:00:00:10.980 EMC: Upstream wide port: CONNECTED.
00:00:00:11.005 EMC: Setting upstream connectivity LED to ON because upstream connection found.
00:00:00:11.013 EMC: Expander requesting Upstream Conn LED change from FLASH to ON
00:00:00:11.021 EMC: Expander requesting Encl LED change from ON to OFF
00:00:00:11.047 EMC: UPSTREAM PORT status going from UNCONNECTED to CONNECTED
00:00:00:11.055 EMC: LED updater changing Upstream Conn LED from FLASH to ON
00:00:00:11.063 EMC: Writing LED command to MC: "L55A55555"
00:00:00:11.134 EMC: Sending changed local info to peer.
00:00:00:12.107 EMC: Other READ PAGE change detected.
00:00:00:15.999 EMC: Detected local PS FAULT change FAULTED to OK.
00:00:00:16.004 EMC: Detected local PS AC FAIL change FAULTED to OK.
00:00:00:16.032 EMC: ENCLOSURE status going from FAULTED to OK
00:00:00:16.037 EMC: POWER B faulted going from FAULTED to OK
00:00:00:16.043 EMC: POWER B AC power fail going from FAULTED to OK
00:00:02:13.980 EMC: Year 2012, Month 4
00:00:02:14.002 EMC: Resynchronizing to Flare time: 1901841062 ms; timestamp adjusted to: 0 ms.
22:00:17:21.092 EMC: Clearing state change bit.
22:00:17:21.099 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
22:00:17:21.296 EMC: Setting enclosure number to 1
22:00:17:21.316 EMC: DISPLAY command success, encl number=01, mode=C.
22:00:17:21.321 EMC: Flare assigns this enclosure number = 255, generation number = 0x7e00
22:00:17:21.331 EMC: Flare polling state change: self NO to YES, peer NO to NO
22:00:17:21.338 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
22:00:17:21.361 EMC: DISPLAY command success, encl number=01, mode=4.
22:00:17:21.518 EMC: Other READ PAGE change detected.
22:00:17:21.522 EMC: Sending changed local info to peer.
22:00:17:21.873 EMC: Setting state change bit.
22:00:17:25.062 EMC: Clearing state change bit.
22:00:17:25.067 EMC: Setting enclosure number to 1
22:00:17:25.088 EMC: DISPLAY command success, encl number=01, mode=4.
22:00:17:25.093 EMC: Flare assigns this enclosure number = 1, generation number = 0x7e00
22:00:17:25.101 EMC: ...but already assigned!
22:00:17:25.265 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
22:00:17:36.334 EMC: Flare polling state change: self YES to YES, peer NO to YES
22:00:17:36.357 EMC: DISPLAY command success, encl number=01, mode=4.
22:00:17:36.663 Setting CPLD activity LED mode to AND because both sides being polled.
22:00:17:51.953 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
22:00:17:54.625 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
22:00:17:57.109 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
22:00:17:59.859 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
22:00:18:02.718 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
22:01:19:04.236 EMC: DISPLAY command success, encl number=01, mode=C.
22:01:19:04.350 EMC: Sending changed local info to peer.
                                                                                                                                                                   

Buffer Type: SXP Trace
Buffer Id: 0
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 49th at 17:03:03.
00:00:00:01:265 EMC: Setting Update lock: 1
00:00:00:01:399 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:420 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:440 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:460 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:482 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:502 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:507 EMC: Failed to get Power Supply revision info.
00:00:00:01:514 EMC: SXP FW Version:   04.05
00:00:00:01:518 EMC: SXP BOOT Version: 03.00
00:00:00:01:522 EMC: SXP ISTR Version: 03.05
00:00:00:01:526 EMC: MC Version:       16.01
00:00:00:01:531 EMC: DLMC Version:     14.47
00:00:00:01:535 EMC: PS Version:       00.01
00:00:00:01:539 EMC: CPLD Version:     00.09
00:00:00:01:543 EMC: Base SAS Address: 50060480_00b680c0
00:00:00:01:548 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:557 EMC: Exception flag read from register is 0
00:00:00:00:985 EMC: Setting enclosure number to 255
00:00:00:01:005 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:01:026 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:049 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:069 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:090 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:112 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:119 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:142 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:165 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:185 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:239 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:259 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:265 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:287 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:308 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:330 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:350 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:370 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:375 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:383 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:01:389 EMC: Checking for updated FW!
00:00:00:01:393 EMC: Checking for SXP FW download
00:00:00:01:420 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:01:435 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:01:440 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:15:669 WDG EXPIRED: Elapsed time since last WDG run: 799 ms
00:00:00:15:674 WDG: Pong not received from: EMA
                                              

Buffer Type: SXP Trace
Buffer Id: 1
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 946
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:15.7
00:00:00:01:264 EMC: Setting Update lock: 1
00:00:00:01:350 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:384 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:404 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:424 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:445 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:467 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:472 EMC: Failed to get Power Supply revision info.
00:00:00:01:478 EMC: SXP FW Version:   04.05
00:00:00:01:483 EMC: SXP BOOT Version: 03.00
00:00:00:01:487 EMC: SXP ISTR Version: 03.05
00:00:00:01:491 EMC: MC Version:       16.01
00:00:00:01:497 EMC: DLMC Version:     14.47
00:00:00:01:501 EMC: PS Version:       00.01
00:00:00:01:505 EMC: CPLD Version:     00.13
00:00:00:15:768 WDG EXPIRED: Elapsed time since last WDG run: 229 ms
00:00:00:15:773 WDG: Pong not received from: EMA
                 

Buffer Type: SXP Trace
Buffer Id: 2
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:51.
00:00:00:01:263 EMC: Setting Update lock: 1
00:00:00:01:349 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:382 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:402 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:423 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:443 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:465 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:470 EMC: Failed to get Power Supply revision info.
00:00:00:01:476 EMC: SXP FW Version:   04.05
00:00:00:01:481 EMC: SXP BOOT Version: 03.00
00:00:00:01:485 EMC: SXP ISTR Version: 03.05
00:00:00:01:489 EMC: MC Version:       16.01
00:00:00:01:493 EMC: DLMC Version:     14.47
00:00:00:01:498 EMC: PS Version:       00.01
00:00:00:01:502 EMC: CPLD Version:     00.13
00:00:00:01:506 EMC: Base SAS Address: 50060480_00fa80c0
00:00:00:01:510 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:520 EMC: Exception flag read from register is 1
00:00:00:36:984 EMC: Setting enclosure number to 255
00:00:00:37:003 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:37:046 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:068 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:089 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:109 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:130 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:136 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:160 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:183 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:204 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:225 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:269 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:274 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:298 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:321 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:342 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:363 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:385 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:390 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:397 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:37:404 EMC: Checking for updated FW!
00:00:00:37:408 EMC: Checking for SXP FW download
00:00:00:37:436 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:37:451 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:37:456 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:51:683 WDG EXPIRED: Elapsed time since last WDG run: 792 ms
00:00:00:51:688 WDG: Pong not received from: EMA
                                              

Buffer Type: Expander Ring Buffer Trace
Buffer Id: 255
Source: Manual
SXP Major Rev: 04
SXP Minor Rev: 30
Length: -1
Timestamp: 04/29/2012 00:19:05
        
00:00:00:06.174 EMC: DRIVE 9 INSERT going from NOT INSERTED to INSERTED
00:00:00:06.180 EMC: DRIVE 10 INSERT going from NOT INSERTED to INSERTED
00:00:00:06.186 EMC: DRIVE 11 INSERT going from NOT INSERTED to INSERTED
00:00:00:06.194 EMC: MISC STATUS HW Type going from 0 to 1
00:00:00:06.200 EMC: Detected downstream addr chg NONE to 50060489_703b0c7f.
00:00:00:06.209 EMC: Detected peer downstream addr chg NONE to INVALID.
00:00:00:06.214 EMC: Detected peer upstream addr chg NONE to INVALID.
00:00:00:06.223 EMC: Detected peer SSP addr chg NONE to INVALID.
00:00:00:06.228 EMC: PEER SIDE going from UNSUPPORTED to SIDE A
00:00:00:06.233 EMC: LED updater changing Upstream Fault LED from NO_CHANGE to OFF
00:00:00:06.241 EMC: LED updater changing Downstream Fault LED from NO_CHANGE to OFF
00:00:00:06.248 EMC: LED updater changing Upstream Conn LED from NO_CHANGE to OFF
00:00:00:06.257 EMC: LED updater changing Downstream Conn LED from NO_CHANGE to OFF
00:00:00:06.265 EMC: Writing LED command to MC: "L55555555"
00:00:00:06.335 EMC: LED updater changing slot 0 fault LED from NO_CHANGE to OFF.
00:00:00:06.343 EMC: LED updater changing slot 1 fault LED from NO_CHANGE to OFF.
00:00:00:06.350 EMC: LED updater changing slot 2 fault LED from NO_CHANGE to OFF.
00:00:00:06.358 EMC: LED updater changing slot 3 fault LED from NO_CHANGE to OFF.
00:00:00:06.365 EMC: LED updater changing slot 4 fault LED from NO_CHANGE to OFF.
00:00:00:06.373 EMC: LED updater changing slot 5 fault LED from NO_CHANGE to OFF.
00:00:00:06.380 EMC: LED updater changing slot 6 fault LED from NO_CHANGE to OFF.
00:00:00:06.388 EMC: LED updater changing slot 7 fault LED from NO_CHANGE to OFF.
00:00:00:06.395 EMC: LED updater changing slot 8 fault LED from NO_CHANGE to OFF.
00:00:00:06.403 EMC: LED updater changing slot 9 fault LED from NO_CHANGE to OFF.
00:00:00:06.410 EMC: LED updater changing slot 10 fault LED from NO_CHANGE to OFF.
00:00:00:06.417 EMC: LED updater changing slot 11 fault LED from NO_CHANGE to OFF.
00:00:00:06.424 EMC: LED updater changing slot 12 fault LED from NO_CHANGE to OFF.
00:00:00:06.431 EMC: LED updater changing slot 13 fault LED from NO_CHANGE to OFF.
00:00:00:06.438 EMC: LED updater changing slot 14 fault LED from NO_CHANGE to OFF.
00:00:00:06.445 EMC: Sending changed local info to peer.
00:00:00:07.334 EMC: ...read processing took 0 ms, status=Success
00:00:00:07.870 EMC: ...read processing took 0 ms, status=Success
00:00:00:09.030 EMC: ...write took 1155 ms, status=Retry
00:00:00:09.034 EMC: ...read processing took 0 ms, status=Success
00:00:00:09.684 EMC: ...write took 644 ms, status=Success
00:00:00:09.690 EMC: Force activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14
00:00:00:09.813 EMC: Downstream wide port: CONNECTED.
00:00:00:09.836 EMC: Setting downstream connectivity LED to ON because downstream connection found.
00:00:00:09.845 EMC: Expander requesting Downstream Conn LED change from OFF to ON
00:00:00:09.852 EMC: Setting upstream connectivity LED to FLASH because peer upstream connected but not me!
00:00:00:09.862 EMC: Expander requesting Upstream Conn LED change from OFF to FLASH
00:00:00:09.869 EMC: Expander requesting Encl LED change from OFF to ON
00:00:00:09.897 EMC: DOWNSTREAM PORT status going from UNCONNECTED to CONNECTED
00:00:00:09.906 EMC: Upstream cable phy 0 status going from NOT READY to READY
00:00:00:09.913 EMC: Upstream cable phy 1 status going from NOT READY to READY
00:00:00:09.922 EMC: Upstream cable phy 2 status going from NOT READY to READY
00:00:00:09.929 EMC: Upstream cable phy 3 status going from NOT READY to READY
00:00:00:09.939 EMC: Detected upstream addr chg NONE to 50060489_703ecaff.
00:00:00:09.947 EMC: Detected peer downstream addr chg INVALID to 50060489_703b0c3f.
00:00:00:09.956 EMC: Detected peer upstream addr chg INVALID to 50060489_703ecabf.
00:00:00:09.963 EMC: Detected peer SSP addr chg INVALID to 50060489_703b18be.
00:00:00:09.971 EMC: LED updater changing Upstream Conn LED from OFF to FLASH
00:00:00:09.977 EMC: LED updater changing Downstream Conn LED from OFF to ON
00:00:00:09.986 EMC: Writing LED command to MC: "L55B95555"
00:00:00:10.055 EMC: Sending changed local info to peer.
00:00:00:10.980 EMC: Upstream wide port: CONNECTED.
00:00:00:11.005 EMC: Setting upstream connectivity LED to ON because upstream connection found.
00:00:00:11.013 EMC: Expander requesting Upstream Conn LED change from FLASH to ON
00:00:00:11.021 EMC: Expander requesting Encl LED change from ON to OFF
00:00:00:11.047 EMC: UPSTREAM PORT status going from UNCONNECTED to CONNECTED
00:00:00:11.055 EMC: LED updater changing Upstream Conn LED from FLASH to ON
00:00:00:11.063 EMC: Writing LED command to MC: "L55A55555"
00:00:00:11.134 EMC: Sending changed local info to peer.
00:00:00:12.107 EMC: Other READ PAGE change detected.
00:00:00:15.999 EMC: Detected local PS FAULT change FAULTED to OK.
00:00:00:16.004 EMC: Detected local PS AC FAIL change FAULTED to OK.
00:00:00:16.032 EMC: ENCLOSURE status going from FAULTED to OK
00:00:00:16.037 EMC: POWER B faulted going from FAULTED to OK
00:00:00:16.043 EMC: POWER B AC power fail going from FAULTED to OK
00:00:02:13.980 EMC: Year 2012, Month 4
00:00:02:14.002 EMC: Resynchronizing to Flare time: 1901841062 ms; timestamp adjusted to: 0 ms.
22:00:17:21.092 EMC: Clearing state change bit.
22:00:17:21.099 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
22:00:17:21.296 EMC: Setting enclosure number to 1
22:00:17:21.316 EMC: DISPLAY command success, encl number=01, mode=C.
22:00:17:21.321 EMC: Flare assigns this enclosure number = 255, generation number = 0x7e00
22:00:17:21.331 EMC: Flare polling state change: self NO to YES, peer NO to NO
22:00:17:21.338 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
22:00:17:21.361 EMC: DISPLAY command success, encl number=01, mode=4.
22:00:17:21.518 EMC: Other READ PAGE change detected.
22:00:17:21.522 EMC: Sending changed local info to peer.
22:00:17:21.873 EMC: Setting state change bit.
22:00:17:25.062 EMC: Clearing state change bit.
22:00:17:25.067 EMC: Setting enclosure number to 1
22:00:17:25.088 EMC: DISPLAY command success, encl number=01, mode=4.
22:00:17:25.093 EMC: Flare assigns this enclosure number = 1, generation number = 0x7e00
22:00:17:25.101 EMC: ...but already assigned!
22:00:17:25.265 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
22:00:17:36.334 EMC: Flare polling state change: self YES to YES, peer NO to YES
22:00:17:36.357 EMC: DISPLAY command success, encl number=01, mode=4.
22:00:17:36.663 Setting CPLD activity LED mode to AND because both sides being polled.
22:00:17:51.953 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
22:00:17:54.625 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
22:00:17:57.109 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
22:00:17:59.859 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
22:00:18:02.718 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
22:01:19:04.177 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
22:01:19:04.184 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
22:01:19:04.193 Setting CPLD activity LED mode to OR because both sides not being polled.
22:01:19:04.203 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
22:01:19:04.236 EMC: DISPLAY command success, encl number=01, mode=C.
22:01:19:04.350 EMC: Sending changed local info to peer.
22:01:19:08.599 EMC: Flare polling state restored because good generation number 0x7e00 received.
22:01:19:08.608 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
22:01:19:08.615 Setting CPLD activity LED mode to AND because both sides being polled.
22:01:19:08.623 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
22:01:19:08.646 EMC: Sending changed local info to peer.
22:01:19:08.658 EMC: DISPLAY command success, encl number=01, mode=4.
22:01:19:13.707 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
22:01:19:13.715 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
22:01:19:13.723 Setting CPLD activity LED mode to OR because both sides not being polled.
22:01:19:13.733 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
22:01:19:13.771 EMC: DISPLAY command success, encl number=01, mode=C.
22:01:19:13.884 EMC: Sending changed local info to peer.
22:01:19:16.230 EMC: Flare polling state restored because good generation number 0x7e00 received.
22:01:19:16.239 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
22:01:19:16.246 Setting CPLD activity LED mode to AND because both sides being polled.
22:01:19:16.254 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
22:01:19:16.277 EMC: DISPLAY command success, encl number=01, mode=4.
22:01:19:20.075 EMC: Sending changed local info to peer.
23:00:00:00.395 EMC: New Day 23
23:00:00:01.634 EMC: Resynchronizing to Flare time: 1987285437 ms; timestamp adjusted to: 0 ms.
24:00:00:00.153 EMC: New Day 24
24:00:00:02.584 EMC: Resynchronizing to Flare time: 2073690593 ms; timestamp adjusted to: 0 ms.
25:00:00:00.242 EMC: New Day 25
25:00:00:00.483 EMC: Resynchronizing to Flare time: 2160089187 ms; timestamp adjusted to: 0 ms.
26:00:00:00.072 EMC: New Day 26
26:00:00:01.371 EMC: Resynchronizing to Flare time: 2246491078 ms; timestamp adjusted to: 0 ms.
27:00:00:00.138 EMC: New Day 27
27:00:00:03.154 EMC: Resynchronizing to Flare time: 2332892968 ms; timestamp adjusted to: 0 ms.
27:01:56:22.934 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
27:01:56:22.942 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
27:01:56:22.949 Setting CPLD activity LED mode to OR because both sides not being polled.
27:01:56:22.960 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
27:01:56:22.986 EMC: DISPLAY command success, encl number=01, mode=C.
27:01:56:23.029 EMC: Sending changed local info to peer.
27:01:56:26.210 EMC: Flare polling state restored because good generation number 0x7e00 received.
27:01:56:26.219 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
27:01:56:26.226 Setting CPLD activity LED mode to AND because both sides being polled.
27:01:56:26.234 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
27:01:56:26.266 EMC: DISPLAY command success, encl number=01, mode=4.
27:01:56:26.301 EMC: Resynchronizing to Flare time: 2339793406 ms; timestamp adjusted to: 0 ms.
27:01:56:33.456 EMC: Sending changed local info to peer.
28:00:00:00.197 EMC: New Day 28
28:00:00:02.989 EMC: Resynchronizing to Flare time: 2419284968 ms; timestamp adjusted to: 0 ms.
28:02:30:43.364 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
28:02:30:43.370 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
28:02:30:43.378 Setting CPLD activity LED mode to OR because both sides not being polled.
28:02:30:43.387 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
28:02:30:43.411 EMC: DISPLAY command success, encl number=01, mode=C.
28:02:30:43.454 EMC: Sending changed local info to peer.
28:02:30:46.643 EMC: Flare polling state restored because good generation number 0x7e00 received.
28:02:30:46.651 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
28:02:30:46.658 Setting CPLD activity LED mode to AND because both sides being polled.
28:02:30:46.667 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
28:02:30:46.689 EMC: DISPLAY command success, encl number=01, mode=4.
28:02:30:46.711 EMC: Resynchronizing to Flare time: 2428255906 ms; timestamp adjusted to: 0 ms.
28:02:30:56.168 EMC: Sending changed local info to peer.
29:00:00:00.072 EMC: New Day 29
29:00:00:01.050 EMC: Resynchronizing to Flare time: 2505680281 ms; timestamp adjusted to: 0 ms.
                                                                                                                                                                 

Buffer Type: SXP Trace
Buffer Id: 0
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 49th at 17:03:03.
00:00:00:01:265 EMC: Setting Update lock: 1
00:00:00:01:399 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:420 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:440 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:460 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:482 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:502 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:507 EMC: Failed to get Power Supply revision info.
00:00:00:01:514 EMC: SXP FW Version:   04.05
00:00:00:01:518 EMC: SXP BOOT Version: 03.00
00:00:00:01:522 EMC: SXP ISTR Version: 03.05
00:00:00:01:526 EMC: MC Version:       16.01
00:00:00:01:531 EMC: DLMC Version:     14.47
00:00:00:01:535 EMC: PS Version:       00.01
00:00:00:01:539 EMC: CPLD Version:     00.09
00:00:00:01:543 EMC: Base SAS Address: 50060480_00b680c0
00:00:00:01:548 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:557 EMC: Exception flag read from register is 0
00:00:00:00:985 EMC: Setting enclosure number to 255
00:00:00:01:005 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:01:026 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:049 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:069 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:090 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:112 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:119 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:142 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:165 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:185 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:239 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:259 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:265 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:287 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:308 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:330 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:350 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:370 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:375 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:383 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:01:389 EMC: Checking for updated FW!
00:00:00:01:393 EMC: Checking for SXP FW download
00:00:00:01:420 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:01:435 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:01:440 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:15:669 WDG EXPIRED: Elapsed time since last WDG run: 799 ms
00:00:00:15:674 WDG: Pong not received from: EMA
                                              

Buffer Type: SXP Trace
Buffer Id: 1
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 946
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:15.7
00:00:00:01:264 EMC: Setting Update lock: 1
00:00:00:01:350 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:384 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:404 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:424 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:445 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:467 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:472 EMC: Failed to get Power Supply revision info.
00:00:00:01:478 EMC: SXP FW Version:   04.05
00:00:00:01:483 EMC: SXP BOOT Version: 03.00
00:00:00:01:487 EMC: SXP ISTR Version: 03.05
00:00:00:01:491 EMC: MC Version:       16.01
00:00:00:01:497 EMC: DLMC Version:     14.47
00:00:00:01:501 EMC: PS Version:       00.01
00:00:00:01:505 EMC: CPLD Version:     00.13
00:00:00:15:768 WDG EXPIRED: Elapsed time since last WDG run: 229 ms
00:00:00:15:773 WDG: Pong not received from: EMA
                 

Buffer Type: SXP Trace
Buffer Id: 2
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:51.
00:00:00:01:263 EMC: Setting Update lock: 1
00:00:00:01:349 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:382 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:402 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:423 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:443 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:465 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:470 EMC: Failed to get Power Supply revision info.
00:00:00:01:476 EMC: SXP FW Version:   04.05
00:00:00:01:481 EMC: SXP BOOT Version: 03.00
00:00:00:01:485 EMC: SXP ISTR Version: 03.05
00:00:00:01:489 EMC: MC Version:       16.01
00:00:00:01:493 EMC: DLMC Version:     14.47
00:00:00:01:498 EMC: PS Version:       00.01
00:00:00:01:502 EMC: CPLD Version:     00.13
00:00:00:01:506 EMC: Base SAS Address: 50060480_00fa80c0
00:00:00:01:510 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:520 EMC: Exception flag read from register is 1
00:00:00:36:984 EMC: Setting enclosure number to 255
00:00:00:37:003 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:37:046 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:068 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:089 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:109 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:130 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:136 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:160 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:183 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:204 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:225 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:269 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:274 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:298 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:321 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:342 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:363 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:385 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:390 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:397 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:37:404 EMC: Checking for updated FW!
00:00:00:37:408 EMC: Checking for SXP FW download
00:00:00:37:436 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:37:451 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:37:456 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:51:683 WDG EXPIRED: Elapsed time since last WDG run: 792 ms
00:00:00:51:688 WDG: Pong not received from: EMA
                                              

Buffer Type: Expander Ring Buffer Trace
Buffer Id: 255
Source: Manual
SXP Major Rev: 04
SXP Minor Rev: 30
Length: -1
Timestamp: 05/27/2012 05:24:59
        
00:00:00:12.107 EMC: Other READ PAGE change detected.
00:00:00:15.999 EMC: Detected local PS FAULT change FAULTED to OK.
00:00:00:16.004 EMC: Detected local PS AC FAIL change FAULTED to OK.
00:00:00:16.032 EMC: ENCLOSURE status going from FAULTED to OK
00:00:00:16.037 EMC: POWER B faulted going from FAULTED to OK
00:00:00:16.043 EMC: POWER B AC power fail going from FAULTED to OK
00:00:02:13.980 EMC: Year 2012, Month 4
00:00:02:14.002 EMC: Resynchronizing to Flare time: 1901841062 ms; timestamp adjusted to: 0 ms.
22:00:17:21.092 EMC: Clearing state change bit.
22:00:17:21.099 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
22:00:17:21.296 EMC: Setting enclosure number to 1
22:00:17:21.316 EMC: DISPLAY command success, encl number=01, mode=C.
22:00:17:21.321 EMC: Flare assigns this enclosure number = 255, generation number = 0x7e00
22:00:17:21.331 EMC: Flare polling state change: self NO to YES, peer NO to NO
22:00:17:21.338 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
22:00:17:21.361 EMC: DISPLAY command success, encl number=01, mode=4.
22:00:17:21.518 EMC: Other READ PAGE change detected.
22:00:17:21.522 EMC: Sending changed local info to peer.
22:00:17:21.873 EMC: Setting state change bit.
22:00:17:25.062 EMC: Clearing state change bit.
22:00:17:25.067 EMC: Setting enclosure number to 1
22:00:17:25.088 EMC: DISPLAY command success, encl number=01, mode=4.
22:00:17:25.093 EMC: Flare assigns this enclosure number = 1, generation number = 0x7e00
22:00:17:25.101 EMC: ...but already assigned!
22:00:17:25.265 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
22:00:17:36.334 EMC: Flare polling state change: self YES to YES, peer NO to YES
22:00:17:36.357 EMC: DISPLAY command success, encl number=01, mode=4.
22:00:17:36.663 Setting CPLD activity LED mode to AND because both sides being polled.
22:00:17:51.953 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
22:00:17:54.625 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
22:00:17:57.109 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
22:00:17:59.859 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
22:00:18:02.718 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
22:01:19:04.177 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
22:01:19:04.184 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
22:01:19:04.193 Setting CPLD activity LED mode to OR because both sides not being polled.
22:01:19:04.203 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
22:01:19:04.236 EMC: DISPLAY command success, encl number=01, mode=C.
22:01:19:04.350 EMC: Sending changed local info to peer.
22:01:19:08.599 EMC: Flare polling state restored because good generation number 0x7e00 received.
22:01:19:08.608 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
22:01:19:08.615 Setting CPLD activity LED mode to AND because both sides being polled.
22:01:19:08.623 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
22:01:19:08.646 EMC: Sending changed local info to peer.
22:01:19:08.658 EMC: DISPLAY command success, encl number=01, mode=4.
22:01:19:13.707 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
22:01:19:13.715 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
22:01:19:13.723 Setting CPLD activity LED mode to OR because both sides not being polled.
22:01:19:13.733 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
22:01:19:13.771 EMC: DISPLAY command success, encl number=01, mode=C.
22:01:19:13.884 EMC: Sending changed local info to peer.
22:01:19:16.230 EMC: Flare polling state restored because good generation number 0x7e00 received.
22:01:19:16.239 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
22:01:19:16.246 Setting CPLD activity LED mode to AND because both sides being polled.
22:01:19:16.254 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
22:01:19:16.277 EMC: DISPLAY command success, encl number=01, mode=4.
22:01:19:20.075 EMC: Sending changed local info to peer.
23:00:00:00.395 EMC: New Day 23
23:00:00:01.634 EMC: Resynchronizing to Flare time: 1987285437 ms; timestamp adjusted to: 0 ms.
24:00:00:00.153 EMC: New Day 24
24:00:00:02.584 EMC: Resynchronizing to Flare time: 2073690593 ms; timestamp adjusted to: 0 ms.
25:00:00:00.242 EMC: New Day 25
25:00:00:00.483 EMC: Resynchronizing to Flare time: 2160089187 ms; timestamp adjusted to: 0 ms.
26:00:00:00.072 EMC: New Day 26
26:00:00:01.371 EMC: Resynchronizing to Flare time: 2246491078 ms; timestamp adjusted to: 0 ms.
27:00:00:00.138 EMC: New Day 27
27:00:00:03.154 EMC: Resynchronizing to Flare time: 2332892968 ms; timestamp adjusted to: 0 ms.
27:01:56:22.934 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
27:01:56:22.942 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
27:01:56:22.949 Setting CPLD activity LED mode to OR because both sides not being polled.
27:01:56:22.960 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
27:01:56:22.986 EMC: DISPLAY command success, encl number=01, mode=C.
27:01:56:23.029 EMC: Sending changed local info to peer.
27:01:56:26.210 EMC: Flare polling state restored because good generation number 0x7e00 received.
27:01:56:26.219 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
27:01:56:26.226 Setting CPLD activity LED mode to AND because both sides being polled.
27:01:56:26.234 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
27:01:56:26.266 EMC: DISPLAY command success, encl number=01, mode=4.
27:01:56:26.301 EMC: Resynchronizing to Flare time: 2339793406 ms; timestamp adjusted to: 0 ms.
27:01:56:33.456 EMC: Sending changed local info to peer.
28:00:00:00.197 EMC: New Day 28
28:00:00:02.989 EMC: Resynchronizing to Flare time: 2419284968 ms; timestamp adjusted to: 0 ms.
28:02:30:43.364 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
28:02:30:43.370 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
28:02:30:43.378 Setting CPLD activity LED mode to OR because both sides not being polled.
28:02:30:43.387 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
28:02:30:43.411 EMC: DISPLAY command success, encl number=01, mode=C.
28:02:30:43.454 EMC: Sending changed local info to peer.
28:02:30:46.643 EMC: Flare polling state restored because good generation number 0x7e00 received.
28:02:30:46.651 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
28:02:30:46.658 Setting CPLD activity LED mode to AND because both sides being polled.
28:02:30:46.667 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
28:02:30:46.689 EMC: DISPLAY command success, encl number=01, mode=4.
28:02:30:46.711 EMC: Resynchronizing to Flare time: 2428255906 ms; timestamp adjusted to: 0 ms.
28:02:30:56.168 EMC: Sending changed local info to peer.
29:00:00:00.072 EMC: New Day 29
29:00:00:01.050 EMC: Resynchronizing to Flare time: 2505680281 ms; timestamp adjusted to: 0 ms.
30:00:00:00.239 EMC: New Day 30
30:00:00:00.811 EMC: Resynchronizing to Flare time: 2592088750 ms; timestamp adjusted to: 0 ms.
30:06:46:54.217 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
30:06:46:54.240 EMC: DISPLAY command success, encl number=01, mode=4.
30:06:46:54.550 Setting CPLD activity LED mode to OR because both sides not being polled.
30:06:46:57.768 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
30:06:46:57.791 EMC: DISPLAY command success, encl number=01, mode=4.
30:06:46:58.090 Setting CPLD activity LED mode to AND because both sides being polled.
31:00:00:00.213 EMC: New Day 31
31:00:00:01.685 EMC: Year 2012, Month 5
31:00:00:01.705 EMC: Resynchronizing to Flare time: 86490625 ms; timestamp adjusted to: 0 ms.
02:00:00:00.051 EMC: New Day 2
02:00:00:02.866 EMC: Resynchronizing to Flare time: 172892468 ms; timestamp adjusted to: 0 ms.
03:00:00:00.020 EMC: New Day 3
03:00:00:01.683 EMC: Resynchronizing to Flare time: 259291093 ms; timestamp adjusted to: 0 ms.
04:00:00:00.171 EMC: New Day 4
04:00:00:00.734 EMC: Resynchronizing to Flare time: 345689656 ms; timestamp adjusted to: 0 ms.
05:00:00:00.278 EMC: New Day 5
05:00:00:03.374 EMC: Resynchronizing to Flare time: 432091531 ms; timestamp adjusted to: 0 ms.
06:00:00:00.223 EMC: New Day 6
06:00:00:01.936 EMC: Resynchronizing to Flare time: 518490125 ms; timestamp adjusted to: 0 ms.
07:00:00:00.247 EMC: New Day 7
07:00:00:02.828 EMC: Resynchronizing to Flare time: 604892000 ms; timestamp adjusted to: 0 ms.
08:00:00:00.097 EMC: New Day 8
08:00:00:01.022 EMC: Resynchronizing to Flare time: 691290625 ms; timestamp adjusted to: 0 ms.
09:00:00:00.120 EMC: New Day 9
09:00:00:03.369 EMC: Resynchronizing to Flare time: 777692484 ms; timestamp adjusted to: 0 ms.
10:00:00:00.052 EMC: New Day 10
10:00:00:02.602 EMC: Resynchronizing to Flare time: 864091062 ms; timestamp adjusted to: 0 ms.
11:00:00:00.202 EMC: New Day 11
11:00:00:01.493 EMC: Resynchronizing to Flare time: 950489656 ms; timestamp adjusted to: 0 ms.
12:00:00:00.112 EMC: New Day 12
12:00:00:03.372 EMC: Resynchronizing to Flare time: 1036891562 ms; timestamp adjusted to: 0 ms.
13:00:00:00.162 EMC: New Day 13
13:00:00:00.768 EMC: Resynchronizing to Flare time: 1123290156 ms; timestamp adjusted to: 0 ms.
14:00:00:00.139 EMC: New Day 14
14:00:00:02.176 EMC: Resynchronizing to Flare time: 1209692000 ms; timestamp adjusted to: 0 ms.
15:00:00:00.135 EMC: New Day 15
15:00:00:01.307 EMC: Resynchronizing to Flare time: 1296090593 ms; timestamp adjusted to: 0 ms.
16:00:00:00.468 EMC: New Day 16
16:00:00:00.972 EMC: Resynchronizing to Flare time: 1382489187 ms; timestamp adjusted to: 0 ms.
17:00:00:00.047 EMC: New Day 17
17:00:00:03.016 EMC: Resynchronizing to Flare time: 1468891062 ms; timestamp adjusted to: 0 ms.
18:00:00:00.102 EMC: New Day 18
18:00:00:00.867 EMC: Resynchronizing to Flare time: 1555289656 ms; timestamp adjusted to: 0 ms.
19:00:00:00.363 EMC: New Day 19
19:00:00:01.875 EMC: Resynchronizing to Flare time: 1641691562 ms; timestamp adjusted to: 0 ms.
20:00:00:00.319 EMC: New Day 20
20:00:00:00.426 EMC: Resynchronizing to Flare time: 1728090125 ms; timestamp adjusted to: 0 ms.
21:00:00:00.145 EMC: New Day 21
21:00:00:02.836 EMC: Resynchronizing to Flare time: 1814492000 ms; timestamp adjusted to: 0 ms.
22:00:00:00.310 EMC: New Day 22
22:00:00:02.312 EMC: Resynchronizing to Flare time: 1900890593 ms; timestamp adjusted to: 0 ms.
23:00:00:00.051 EMC: New Day 23
23:00:00:00.913 EMC: Resynchronizing to Flare time: 1987289187 ms; timestamp adjusted to: 0 ms.
24:00:00:00.184 EMC: New Day 24
24:00:00:02.210 EMC: Resynchronizing to Flare time: 2073691093 ms; timestamp adjusted to: 0 ms.
25:00:00:00.221 EMC: New Day 25
25:00:00:03.477 EMC: Resynchronizing to Flare time: 2160092937 ms; timestamp adjusted to: 0 ms.
26:00:00:00.010 EMC: New Day 26
26:00:00:02.472 EMC: Resynchronizing to Flare time: 2246491562 ms; timestamp adjusted to: 0 ms.
27:00:00:00.030 EMC: New Day 27
27:00:00:01.336 EMC: Resynchronizing to Flare time: 2332890125 ms; timestamp adjusted to: 0 ms.
                                                                                                                                                                 

Buffer Type: SXP Trace
Buffer Id: 0
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 49th at 17:03:03.
00:00:00:01:265 EMC: Setting Update lock: 1
00:00:00:01:399 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:420 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:440 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:460 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:482 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:502 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:507 EMC: Failed to get Power Supply revision info.
00:00:00:01:514 EMC: SXP FW Version:   04.05
00:00:00:01:518 EMC: SXP BOOT Version: 03.00
00:00:00:01:522 EMC: SXP ISTR Version: 03.05
00:00:00:01:526 EMC: MC Version:       16.01
00:00:00:01:531 EMC: DLMC Version:     14.47
00:00:00:01:535 EMC: PS Version:       00.01
00:00:00:01:539 EMC: CPLD Version:     00.09
00:00:00:01:543 EMC: Base SAS Address: 50060480_00b680c0
00:00:00:01:548 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:557 EMC: Exception flag read from register is 0
00:00:00:00:985 EMC: Setting enclosure number to 255
00:00:00:01:005 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:01:026 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:049 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:069 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:090 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:112 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:119 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:142 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:165 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:185 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:239 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:259 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:265 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:287 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:308 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:330 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:350 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:370 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:375 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:383 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:01:389 EMC: Checking for updated FW!
00:00:00:01:393 EMC: Checking for SXP FW download
00:00:00:01:420 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:01:435 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:01:440 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:15:669 WDG EXPIRED: Elapsed time since last WDG run: 799 ms
00:00:00:15:674 WDG: Pong not received from: EMA
                                              

Buffer Type: SXP Trace
Buffer Id: 1
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 946
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:15.7
00:00:00:01:264 EMC: Setting Update lock: 1
00:00:00:01:350 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:384 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:404 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:424 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:445 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:467 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:472 EMC: Failed to get Power Supply revision info.
00:00:00:01:478 EMC: SXP FW Version:   04.05
00:00:00:01:483 EMC: SXP BOOT Version: 03.00
00:00:00:01:487 EMC: SXP ISTR Version: 03.05
00:00:00:01:491 EMC: MC Version:       16.01
00:00:00:01:497 EMC: DLMC Version:     14.47
00:00:00:01:501 EMC: PS Version:       00.01
00:00:00:01:505 EMC: CPLD Version:     00.13
00:00:00:15:768 WDG EXPIRED: Elapsed time since last WDG run: 229 ms
00:00:00:15:773 WDG: Pong not received from: EMA
                 

Buffer Type: SXP Trace
Buffer Id: 2
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:51.
00:00:00:01:263 EMC: Setting Update lock: 1
00:00:00:01:349 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:382 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:402 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:423 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:443 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:465 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:470 EMC: Failed to get Power Supply revision info.
00:00:00:01:476 EMC: SXP FW Version:   04.05
00:00:00:01:481 EMC: SXP BOOT Version: 03.00
00:00:00:01:485 EMC: SXP ISTR Version: 03.05
00:00:00:01:489 EMC: MC Version:       16.01
00:00:00:01:493 EMC: DLMC Version:     14.47
00:00:00:01:498 EMC: PS Version:       00.01
00:00:00:01:502 EMC: CPLD Version:     00.13
00:00:00:01:506 EMC: Base SAS Address: 50060480_00fa80c0
00:00:00:01:510 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:520 EMC: Exception flag read from register is 1
00:00:00:36:984 EMC: Setting enclosure number to 255
00:00:00:37:003 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:37:046 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:068 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:089 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:109 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:130 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:136 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:160 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:183 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:204 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:225 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:269 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:274 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:298 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:321 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:342 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:363 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:385 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:390 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:397 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:37:404 EMC: Checking for updated FW!
00:00:00:37:408 EMC: Checking for SXP FW download
00:00:00:37:436 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:37:451 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:37:456 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:51:683 WDG EXPIRED: Elapsed time since last WDG run: 792 ms
00:00:00:51:688 WDG: Pong not received from: EMA
                                              

Buffer Type: Expander Ring Buffer Trace
Buffer Id: 255
Source: Manual
SXP Major Rev: 04
SXP Minor Rev: 30
Length: -1
Timestamp: 05/27/2012 05:27:59
        
22:00:17:21.331 EMC: Flare polling state change: self NO to YES, peer NO to NO
22:00:17:21.338 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
22:00:17:21.361 EMC: DISPLAY command success, encl number=01, mode=4.
22:00:17:21.518 EMC: Other READ PAGE change detected.
22:00:17:21.522 EMC: Sending changed local info to peer.
22:00:17:21.873 EMC: Setting state change bit.
22:00:17:25.062 EMC: Clearing state change bit.
22:00:17:25.067 EMC: Setting enclosure number to 1
22:00:17:25.088 EMC: DISPLAY command success, encl number=01, mode=4.
22:00:17:25.093 EMC: Flare assigns this enclosure number = 1, generation number = 0x7e00
22:00:17:25.101 EMC: ...but already assigned!
22:00:17:25.265 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
22:00:17:36.334 EMC: Flare polling state change: self YES to YES, peer NO to YES
22:00:17:36.357 EMC: DISPLAY command success, encl number=01, mode=4.
22:00:17:36.663 Setting CPLD activity LED mode to AND because both sides being polled.
22:00:17:51.953 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
22:00:17:54.625 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
22:00:17:57.109 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
22:00:17:59.859 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
22:00:18:02.718 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
22:01:19:04.177 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
22:01:19:04.184 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
22:01:19:04.193 Setting CPLD activity LED mode to OR because both sides not being polled.
22:01:19:04.203 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
22:01:19:04.236 EMC: DISPLAY command success, encl number=01, mode=C.
22:01:19:04.350 EMC: Sending changed local info to peer.
22:01:19:08.599 EMC: Flare polling state restored because good generation number 0x7e00 received.
22:01:19:08.608 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
22:01:19:08.615 Setting CPLD activity LED mode to AND because both sides being polled.
22:01:19:08.623 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
22:01:19:08.646 EMC: Sending changed local info to peer.
22:01:19:08.658 EMC: DISPLAY command success, encl number=01, mode=4.
22:01:19:13.707 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
22:01:19:13.715 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
22:01:19:13.723 Setting CPLD activity LED mode to OR because both sides not being polled.
22:01:19:13.733 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
22:01:19:13.771 EMC: DISPLAY command success, encl number=01, mode=C.
22:01:19:13.884 EMC: Sending changed local info to peer.
22:01:19:16.230 EMC: Flare polling state restored because good generation number 0x7e00 received.
22:01:19:16.239 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
22:01:19:16.246 Setting CPLD activity LED mode to AND because both sides being polled.
22:01:19:16.254 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
22:01:19:16.277 EMC: DISPLAY command success, encl number=01, mode=4.
22:01:19:20.075 EMC: Sending changed local info to peer.
23:00:00:00.395 EMC: New Day 23
23:00:00:01.634 EMC: Resynchronizing to Flare time: 1987285437 ms; timestamp adjusted to: 0 ms.
24:00:00:00.153 EMC: New Day 24
24:00:00:02.584 EMC: Resynchronizing to Flare time: 2073690593 ms; timestamp adjusted to: 0 ms.
25:00:00:00.242 EMC: New Day 25
25:00:00:00.483 EMC: Resynchronizing to Flare time: 2160089187 ms; timestamp adjusted to: 0 ms.
26:00:00:00.072 EMC: New Day 26
26:00:00:01.371 EMC: Resynchronizing to Flare time: 2246491078 ms; timestamp adjusted to: 0 ms.
27:00:00:00.138 EMC: New Day 27
27:00:00:03.154 EMC: Resynchronizing to Flare time: 2332892968 ms; timestamp adjusted to: 0 ms.
27:01:56:22.934 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
27:01:56:22.942 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
27:01:56:22.949 Setting CPLD activity LED mode to OR because both sides not being polled.
27:01:56:22.960 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
27:01:56:22.986 EMC: DISPLAY command success, encl number=01, mode=C.
27:01:56:23.029 EMC: Sending changed local info to peer.
27:01:56:26.210 EMC: Flare polling state restored because good generation number 0x7e00 received.
27:01:56:26.219 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
27:01:56:26.226 Setting CPLD activity LED mode to AND because both sides being polled.
27:01:56:26.234 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
27:01:56:26.266 EMC: DISPLAY command success, encl number=01, mode=4.
27:01:56:26.301 EMC: Resynchronizing to Flare time: 2339793406 ms; timestamp adjusted to: 0 ms.
27:01:56:33.456 EMC: Sending changed local info to peer.
28:00:00:00.197 EMC: New Day 28
28:00:00:02.989 EMC: Resynchronizing to Flare time: 2419284968 ms; timestamp adjusted to: 0 ms.
28:02:30:43.364 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
28:02:30:43.370 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
28:02:30:43.378 Setting CPLD activity LED mode to OR because both sides not being polled.
28:02:30:43.387 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
28:02:30:43.411 EMC: DISPLAY command success, encl number=01, mode=C.
28:02:30:43.454 EMC: Sending changed local info to peer.
28:02:30:46.643 EMC: Flare polling state restored because good generation number 0x7e00 received.
28:02:30:46.651 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
28:02:30:46.658 Setting CPLD activity LED mode to AND because both sides being polled.
28:02:30:46.667 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
28:02:30:46.689 EMC: DISPLAY command success, encl number=01, mode=4.
28:02:30:46.711 EMC: Resynchronizing to Flare time: 2428255906 ms; timestamp adjusted to: 0 ms.
28:02:30:56.168 EMC: Sending changed local info to peer.
29:00:00:00.072 EMC: New Day 29
29:00:00:01.050 EMC: Resynchronizing to Flare time: 2505680281 ms; timestamp adjusted to: 0 ms.
30:00:00:00.239 EMC: New Day 30
30:00:00:00.811 EMC: Resynchronizing to Flare time: 2592088750 ms; timestamp adjusted to: 0 ms.
30:06:46:54.217 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
30:06:46:54.240 EMC: DISPLAY command success, encl number=01, mode=4.
30:06:46:54.550 Setting CPLD activity LED mode to OR because both sides not being polled.
30:06:46:57.768 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
30:06:46:57.791 EMC: DISPLAY command success, encl number=01, mode=4.
30:06:46:58.090 Setting CPLD activity LED mode to AND because both sides being polled.
31:00:00:00.213 EMC: New Day 31
31:00:00:01.685 EMC: Year 2012, Month 5
31:00:00:01.705 EMC: Resynchronizing to Flare time: 86490625 ms; timestamp adjusted to: 0 ms.
02:00:00:00.051 EMC: New Day 2
02:00:00:02.866 EMC: Resynchronizing to Flare time: 172892468 ms; timestamp adjusted to: 0 ms.
03:00:00:00.020 EMC: New Day 3
03:00:00:01.683 EMC: Resynchronizing to Flare time: 259291093 ms; timestamp adjusted to: 0 ms.
04:00:00:00.171 EMC: New Day 4
04:00:00:00.734 EMC: Resynchronizing to Flare time: 345689656 ms; timestamp adjusted to: 0 ms.
05:00:00:00.278 EMC: New Day 5
05:00:00:03.374 EMC: Resynchronizing to Flare time: 432091531 ms; timestamp adjusted to: 0 ms.
06:00:00:00.223 EMC: New Day 6
06:00:00:01.936 EMC: Resynchronizing to Flare time: 518490125 ms; timestamp adjusted to: 0 ms.
07:00:00:00.247 EMC: New Day 7
07:00:00:02.828 EMC: Resynchronizing to Flare time: 604892000 ms; timestamp adjusted to: 0 ms.
08:00:00:00.097 EMC: New Day 8
08:00:00:01.022 EMC: Resynchronizing to Flare time: 691290625 ms; timestamp adjusted to: 0 ms.
09:00:00:00.120 EMC: New Day 9
09:00:00:03.369 EMC: Resynchronizing to Flare time: 777692484 ms; timestamp adjusted to: 0 ms.
10:00:00:00.052 EMC: New Day 10
10:00:00:02.602 EMC: Resynchronizing to Flare time: 864091062 ms; timestamp adjusted to: 0 ms.
11:00:00:00.202 EMC: New Day 11
11:00:00:01.493 EMC: Resynchronizing to Flare time: 950489656 ms; timestamp adjusted to: 0 ms.
12:00:00:00.112 EMC: New Day 12
12:00:00:03.372 EMC: Resynchronizing to Flare time: 1036891562 ms; timestamp adjusted to: 0 ms.
13:00:00:00.162 EMC: New Day 13
13:00:00:00.768 EMC: Resynchronizing to Flare time: 1123290156 ms; timestamp adjusted to: 0 ms.
14:00:00:00.139 EMC: New Day 14
14:00:00:02.176 EMC: Resynchronizing to Flare time: 1209692000 ms; timestamp adjusted to: 0 ms.
15:00:00:00.135 EMC: New Day 15
15:00:00:01.307 EMC: Resynchronizing to Flare time: 1296090593 ms; timestamp adjusted to: 0 ms.
16:00:00:00.468 EMC: New Day 16
16:00:00:00.972 EMC: Resynchronizing to Flare time: 1382489187 ms; timestamp adjusted to: 0 ms.
17:00:00:00.047 EMC: New Day 17
17:00:00:03.016 EMC: Resynchronizing to Flare time: 1468891062 ms; timestamp adjusted to: 0 ms.
18:00:00:00.102 EMC: New Day 18
18:00:00:00.867 EMC: Resynchronizing to Flare time: 1555289656 ms; timestamp adjusted to: 0 ms.
19:00:00:00.363 EMC: New Day 19
19:00:00:01.875 EMC: Resynchronizing to Flare time: 1641691562 ms; timestamp adjusted to: 0 ms.
20:00:00:00.319 EMC: New Day 20
20:00:00:00.426 EMC: Resynchronizing to Flare time: 1728090125 ms; timestamp adjusted to: 0 ms.
21:00:00:00.145 EMC: New Day 21
21:00:00:02.836 EMC: Resynchronizing to Flare time: 1814492000 ms; timestamp adjusted to: 0 ms.
22:00:00:00.310 EMC: New Day 22
22:00:00:02.312 EMC: Resynchronizing to Flare time: 1900890593 ms; timestamp adjusted to: 0 ms.
23:00:00:00.051 EMC: New Day 23
23:00:00:00.913 EMC: Resynchronizing to Flare time: 1987289187 ms; timestamp adjusted to: 0 ms.
24:00:00:00.184 EMC: New Day 24
24:00:00:02.210 EMC: Resynchronizing to Flare time: 2073691093 ms; timestamp adjusted to: 0 ms.
25:00:00:00.221 EMC: New Day 25
25:00:00:03.477 EMC: Resynchronizing to Flare time: 2160092937 ms; timestamp adjusted to: 0 ms.
26:00:00:00.010 EMC: New Day 26
26:00:00:02.472 EMC: Resynchronizing to Flare time: 2246491562 ms; timestamp adjusted to: 0 ms.
27:00:00:00.030 EMC: New Day 27
27:00:00:01.336 EMC: Resynchronizing to Flare time: 2332890125 ms; timestamp adjusted to: 0 ms.
27:05:24:47.985 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
27:05:24:47.994 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
27:05:24:48.001 Setting CPLD activity LED mode to OR because both sides not being polled.
27:05:24:48.012 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
27:05:24:48.048 EMC: DISPLAY command success, encl number=01, mode=C.
27:05:24:48.157 EMC: Sending changed local info to peer.
27:05:24:52.602 EMC: Flare polling state restored because good generation number 0x7e00 received.
27:05:24:52.610 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
27:05:24:52.617 Setting CPLD activity LED mode to AND because both sides being polled.
27:05:24:52.626 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
27:05:24:52.648 EMC: DISPLAY command success, encl number=01, mode=4.
27:05:24:52.671 EMC: Resynchronizing to Flare time: 2352309015 ms; timestamp adjusted to: 0 ms.
27:05:25:09.241 EMC: Sending changed local info to peer.
                                                                                                                                                                 

Buffer Type: SXP Trace
Buffer Id: 0
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 49th at 17:03:03.
00:00:00:01:265 EMC: Setting Update lock: 1
00:00:00:01:399 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:420 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:440 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:460 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:482 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:502 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:507 EMC: Failed to get Power Supply revision info.
00:00:00:01:514 EMC: SXP FW Version:   04.05
00:00:00:01:518 EMC: SXP BOOT Version: 03.00
00:00:00:01:522 EMC: SXP ISTR Version: 03.05
00:00:00:01:526 EMC: MC Version:       16.01
00:00:00:01:531 EMC: DLMC Version:     14.47
00:00:00:01:535 EMC: PS Version:       00.01
00:00:00:01:539 EMC: CPLD Version:     00.09
00:00:00:01:543 EMC: Base SAS Address: 50060480_00b680c0
00:00:00:01:548 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:557 EMC: Exception flag read from register is 0
00:00:00:00:985 EMC: Setting enclosure number to 255
00:00:00:01:005 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:01:026 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:049 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:069 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:090 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:112 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:119 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:142 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:165 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:185 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:239 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:259 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:265 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:287 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:308 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:330 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:350 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:370 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:375 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:383 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:01:389 EMC: Checking for updated FW!
00:00:00:01:393 EMC: Checking for SXP FW download
00:00:00:01:420 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:01:435 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:01:440 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:15:669 WDG EXPIRED: Elapsed time since last WDG run: 799 ms
00:00:00:15:674 WDG: Pong not received from: EMA
                                              

Buffer Type: SXP Trace
Buffer Id: 1
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 946
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:15.7
00:00:00:01:264 EMC: Setting Update lock: 1
00:00:00:01:350 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:384 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:404 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:424 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:445 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:467 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:472 EMC: Failed to get Power Supply revision info.
00:00:00:01:478 EMC: SXP FW Version:   04.05
00:00:00:01:483 EMC: SXP BOOT Version: 03.00
00:00:00:01:487 EMC: SXP ISTR Version: 03.05
00:00:00:01:491 EMC: MC Version:       16.01
00:00:00:01:497 EMC: DLMC Version:     14.47
00:00:00:01:501 EMC: PS Version:       00.01
00:00:00:01:505 EMC: CPLD Version:     00.13
00:00:00:15:768 WDG EXPIRED: Elapsed time since last WDG run: 229 ms
00:00:00:15:773 WDG: Pong not received from: EMA
                 

Buffer Type: SXP Trace
Buffer Id: 2
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:51.
00:00:00:01:263 EMC: Setting Update lock: 1
00:00:00:01:349 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:382 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:402 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:423 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:443 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:465 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:470 EMC: Failed to get Power Supply revision info.
00:00:00:01:476 EMC: SXP FW Version:   04.05
00:00:00:01:481 EMC: SXP BOOT Version: 03.00
00:00:00:01:485 EMC: SXP ISTR Version: 03.05
00:00:00:01:489 EMC: MC Version:       16.01
00:00:00:01:493 EMC: DLMC Version:     14.47
00:00:00:01:498 EMC: PS Version:       00.01
00:00:00:01:502 EMC: CPLD Version:     00.13
00:00:00:01:506 EMC: Base SAS Address: 50060480_00fa80c0
00:00:00:01:510 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:520 EMC: Exception flag read from register is 1
00:00:00:36:984 EMC: Setting enclosure number to 255
00:00:00:37:003 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:37:046 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:068 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:089 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:109 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:130 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:136 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:160 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:183 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:204 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:225 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:269 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:274 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:298 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:321 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:342 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:363 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:385 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:390 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:397 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:37:404 EMC: Checking for updated FW!
00:00:00:37:408 EMC: Checking for SXP FW download
00:00:00:37:436 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:37:451 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:37:456 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:51:683 WDG EXPIRED: Elapsed time since last WDG run: 792 ms
00:00:00:51:688 WDG: Pong not received from: EMA
                                              

Buffer Type: Expander Ring Buffer Trace
Buffer Id: 255
Source: Manual
SXP Major Rev: 04
SXP Minor Rev: 30
Length: -1
Timestamp: 05/27/2012 06:23:54
        
22:00:17:21.331 EMC: Flare polling state change: self NO to YES, peer NO to NO
22:00:17:21.338 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
22:00:17:21.361 EMC: DISPLAY command success, encl number=01, mode=4.
22:00:17:21.518 EMC: Other READ PAGE change detected.
22:00:17:21.522 EMC: Sending changed local info to peer.
22:00:17:21.873 EMC: Setting state change bit.
22:00:17:25.062 EMC: Clearing state change bit.
22:00:17:25.067 EMC: Setting enclosure number to 1
22:00:17:25.088 EMC: DISPLAY command success, encl number=01, mode=4.
22:00:17:25.093 EMC: Flare assigns this enclosure number = 1, generation number = 0x7e00
22:00:17:25.101 EMC: ...but already assigned!
22:00:17:25.265 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
22:00:17:36.334 EMC: Flare polling state change: self YES to YES, peer NO to YES
22:00:17:36.357 EMC: DISPLAY command success, encl number=01, mode=4.
22:00:17:36.663 Setting CPLD activity LED mode to AND because both sides being polled.
22:00:17:51.953 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
22:00:17:54.625 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
22:00:17:57.109 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
22:00:17:59.859 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
22:00:18:02.718 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
22:01:19:04.177 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
22:01:19:04.184 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
22:01:19:04.193 Setting CPLD activity LED mode to OR because both sides not being polled.
22:01:19:04.203 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
22:01:19:04.236 EMC: DISPLAY command success, encl number=01, mode=C.
22:01:19:04.350 EMC: Sending changed local info to peer.
22:01:19:08.599 EMC: Flare polling state restored because good generation number 0x7e00 received.
22:01:19:08.608 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
22:01:19:08.615 Setting CPLD activity LED mode to AND because both sides being polled.
22:01:19:08.623 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
22:01:19:08.646 EMC: Sending changed local info to peer.
22:01:19:08.658 EMC: DISPLAY command success, encl number=01, mode=4.
22:01:19:13.707 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
22:01:19:13.715 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
22:01:19:13.723 Setting CPLD activity LED mode to OR because both sides not being polled.
22:01:19:13.733 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
22:01:19:13.771 EMC: DISPLAY command success, encl number=01, mode=C.
22:01:19:13.884 EMC: Sending changed local info to peer.
22:01:19:16.230 EMC: Flare polling state restored because good generation number 0x7e00 received.
22:01:19:16.239 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
22:01:19:16.246 Setting CPLD activity LED mode to AND because both sides being polled.
22:01:19:16.254 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
22:01:19:16.277 EMC: DISPLAY command success, encl number=01, mode=4.
22:01:19:20.075 EMC: Sending changed local info to peer.
23:00:00:00.395 EMC: New Day 23
23:00:00:01.634 EMC: Resynchronizing to Flare time: 1987285437 ms; timestamp adjusted to: 0 ms.
24:00:00:00.153 EMC: New Day 24
24:00:00:02.584 EMC: Resynchronizing to Flare time: 2073690593 ms; timestamp adjusted to: 0 ms.
25:00:00:00.242 EMC: New Day 25
25:00:00:00.483 EMC: Resynchronizing to Flare time: 2160089187 ms; timestamp adjusted to: 0 ms.
26:00:00:00.072 EMC: New Day 26
26:00:00:01.371 EMC: Resynchronizing to Flare time: 2246491078 ms; timestamp adjusted to: 0 ms.
27:00:00:00.138 EMC: New Day 27
27:00:00:03.154 EMC: Resynchronizing to Flare time: 2332892968 ms; timestamp adjusted to: 0 ms.
27:01:56:22.934 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
27:01:56:22.942 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
27:01:56:22.949 Setting CPLD activity LED mode to OR because both sides not being polled.
27:01:56:22.960 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
27:01:56:22.986 EMC: DISPLAY command success, encl number=01, mode=C.
27:01:56:23.029 EMC: Sending changed local info to peer.
27:01:56:26.210 EMC: Flare polling state restored because good generation number 0x7e00 received.
27:01:56:26.219 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
27:01:56:26.226 Setting CPLD activity LED mode to AND because both sides being polled.
27:01:56:26.234 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
27:01:56:26.266 EMC: DISPLAY command success, encl number=01, mode=4.
27:01:56:26.301 EMC: Resynchronizing to Flare time: 2339793406 ms; timestamp adjusted to: 0 ms.
27:01:56:33.456 EMC: Sending changed local info to peer.
28:00:00:00.197 EMC: New Day 28
28:00:00:02.989 EMC: Resynchronizing to Flare time: 2419284968 ms; timestamp adjusted to: 0 ms.
28:02:30:43.364 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
28:02:30:43.370 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
28:02:30:43.378 Setting CPLD activity LED mode to OR because both sides not being polled.
28:02:30:43.387 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
28:02:30:43.411 EMC: DISPLAY command success, encl number=01, mode=C.
28:02:30:43.454 EMC: Sending changed local info to peer.
28:02:30:46.643 EMC: Flare polling state restored because good generation number 0x7e00 received.
28:02:30:46.651 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
28:02:30:46.658 Setting CPLD activity LED mode to AND because both sides being polled.
28:02:30:46.667 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
28:02:30:46.689 EMC: DISPLAY command success, encl number=01, mode=4.
28:02:30:46.711 EMC: Resynchronizing to Flare time: 2428255906 ms; timestamp adjusted to: 0 ms.
28:02:30:56.168 EMC: Sending changed local info to peer.
29:00:00:00.072 EMC: New Day 29
29:00:00:01.050 EMC: Resynchronizing to Flare time: 2505680281 ms; timestamp adjusted to: 0 ms.
30:00:00:00.239 EMC: New Day 30
30:00:00:00.811 EMC: Resynchronizing to Flare time: 2592088750 ms; timestamp adjusted to: 0 ms.
30:06:46:54.217 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
30:06:46:54.240 EMC: DISPLAY command success, encl number=01, mode=4.
30:06:46:54.550 Setting CPLD activity LED mode to OR because both sides not being polled.
30:06:46:57.768 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
30:06:46:57.791 EMC: DISPLAY command success, encl number=01, mode=4.
30:06:46:58.090 Setting CPLD activity LED mode to AND because both sides being polled.
31:00:00:00.213 EMC: New Day 31
31:00:00:01.685 EMC: Year 2012, Month 5
31:00:00:01.705 EMC: Resynchronizing to Flare time: 86490625 ms; timestamp adjusted to: 0 ms.
02:00:00:00.051 EMC: New Day 2
02:00:00:02.866 EMC: Resynchronizing to Flare time: 172892468 ms; timestamp adjusted to: 0 ms.
03:00:00:00.020 EMC: New Day 3
03:00:00:01.683 EMC: Resynchronizing to Flare time: 259291093 ms; timestamp adjusted to: 0 ms.
04:00:00:00.171 EMC: New Day 4
04:00:00:00.734 EMC: Resynchronizing to Flare time: 345689656 ms; timestamp adjusted to: 0 ms.
05:00:00:00.278 EMC: New Day 5
05:00:00:03.374 EMC: Resynchronizing to Flare time: 432091531 ms; timestamp adjusted to: 0 ms.
06:00:00:00.223 EMC: New Day 6
06:00:00:01.936 EMC: Resynchronizing to Flare time: 518490125 ms; timestamp adjusted to: 0 ms.
07:00:00:00.247 EMC: New Day 7
07:00:00:02.828 EMC: Resynchronizing to Flare time: 604892000 ms; timestamp adjusted to: 0 ms.
08:00:00:00.097 EMC: New Day 8
08:00:00:01.022 EMC: Resynchronizing to Flare time: 691290625 ms; timestamp adjusted to: 0 ms.
09:00:00:00.120 EMC: New Day 9
09:00:00:03.369 EMC: Resynchronizing to Flare time: 777692484 ms; timestamp adjusted to: 0 ms.
10:00:00:00.052 EMC: New Day 10
10:00:00:02.602 EMC: Resynchronizing to Flare time: 864091062 ms; timestamp adjusted to: 0 ms.
11:00:00:00.202 EMC: New Day 11
11:00:00:01.493 EMC: Resynchronizing to Flare time: 950489656 ms; timestamp adjusted to: 0 ms.
12:00:00:00.112 EMC: New Day 12
12:00:00:03.372 EMC: Resynchronizing to Flare time: 1036891562 ms; timestamp adjusted to: 0 ms.
13:00:00:00.162 EMC: New Day 13
13:00:00:00.768 EMC: Resynchronizing to Flare time: 1123290156 ms; timestamp adjusted to: 0 ms.
14:00:00:00.139 EMC: New Day 14
14:00:00:02.176 EMC: Resynchronizing to Flare time: 1209692000 ms; timestamp adjusted to: 0 ms.
15:00:00:00.135 EMC: New Day 15
15:00:00:01.307 EMC: Resynchronizing to Flare time: 1296090593 ms; timestamp adjusted to: 0 ms.
16:00:00:00.468 EMC: New Day 16
16:00:00:00.972 EMC: Resynchronizing to Flare time: 1382489187 ms; timestamp adjusted to: 0 ms.
17:00:00:00.047 EMC: New Day 17
17:00:00:03.016 EMC: Resynchronizing to Flare time: 1468891062 ms; timestamp adjusted to: 0 ms.
18:00:00:00.102 EMC: New Day 18
18:00:00:00.867 EMC: Resynchronizing to Flare time: 1555289656 ms; timestamp adjusted to: 0 ms.
19:00:00:00.363 EMC: New Day 19
19:00:00:01.875 EMC: Resynchronizing to Flare time: 1641691562 ms; timestamp adjusted to: 0 ms.
20:00:00:00.319 EMC: New Day 20
20:00:00:00.426 EMC: Resynchronizing to Flare time: 1728090125 ms; timestamp adjusted to: 0 ms.
21:00:00:00.145 EMC: New Day 21
21:00:00:02.836 EMC: Resynchronizing to Flare time: 1814492000 ms; timestamp adjusted to: 0 ms.
22:00:00:00.310 EMC: New Day 22
22:00:00:02.312 EMC: Resynchronizing to Flare time: 1900890593 ms; timestamp adjusted to: 0 ms.
23:00:00:00.051 EMC: New Day 23
23:00:00:00.913 EMC: Resynchronizing to Flare time: 1987289187 ms; timestamp adjusted to: 0 ms.
24:00:00:00.184 EMC: New Day 24
24:00:00:02.210 EMC: Resynchronizing to Flare time: 2073691093 ms; timestamp adjusted to: 0 ms.
25:00:00:00.221 EMC: New Day 25
25:00:00:03.477 EMC: Resynchronizing to Flare time: 2160092937 ms; timestamp adjusted to: 0 ms.
26:00:00:00.010 EMC: New Day 26
26:00:00:02.472 EMC: Resynchronizing to Flare time: 2246491562 ms; timestamp adjusted to: 0 ms.
27:00:00:00.030 EMC: New Day 27
27:00:00:01.336 EMC: Resynchronizing to Flare time: 2332890125 ms; timestamp adjusted to: 0 ms.
27:05:24:47.985 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
27:05:24:47.994 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
27:05:24:48.001 Setting CPLD activity LED mode to OR because both sides not being polled.
27:05:24:48.012 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
27:05:24:48.048 EMC: DISPLAY command success, encl number=01, mode=C.
27:05:24:48.157 EMC: Sending changed local info to peer.
27:05:24:52.602 EMC: Flare polling state restored because good generation number 0x7e00 received.
27:05:24:52.610 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
27:05:24:52.617 Setting CPLD activity LED mode to AND because both sides being polled.
27:05:24:52.626 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
27:05:24:52.648 EMC: DISPLAY command success, encl number=01, mode=4.
27:05:24:52.671 EMC: Resynchronizing to Flare time: 2352309015 ms; timestamp adjusted to: 0 ms.
27:05:25:09.241 EMC: Sending changed local info to peer.
                                                                                                                                                                 

Buffer Type: SXP Trace
Buffer Id: 0
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 49th at 17:03:03.
00:00:00:01:265 EMC: Setting Update lock: 1
00:00:00:01:399 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:420 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:440 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:460 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:482 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:502 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:507 EMC: Failed to get Power Supply revision info.
00:00:00:01:514 EMC: SXP FW Version:   04.05
00:00:00:01:518 EMC: SXP BOOT Version: 03.00
00:00:00:01:522 EMC: SXP ISTR Version: 03.05
00:00:00:01:526 EMC: MC Version:       16.01
00:00:00:01:531 EMC: DLMC Version:     14.47
00:00:00:01:535 EMC: PS Version:       00.01
00:00:00:01:539 EMC: CPLD Version:     00.09
00:00:00:01:543 EMC: Base SAS Address: 50060480_00b680c0
00:00:00:01:548 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:557 EMC: Exception flag read from register is 0
00:00:00:00:985 EMC: Setting enclosure number to 255
00:00:00:01:005 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:01:026 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:049 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:069 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:090 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:112 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:119 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:142 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:165 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:185 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:239 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:259 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:265 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:287 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:308 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:330 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:350 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:370 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:375 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:383 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:01:389 EMC: Checking for updated FW!
00:00:00:01:393 EMC: Checking for SXP FW download
00:00:00:01:420 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:01:435 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:01:440 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:15:669 WDG EXPIRED: Elapsed time since last WDG run: 799 ms
00:00:00:15:674 WDG: Pong not received from: EMA
                                              

Buffer Type: SXP Trace
Buffer Id: 1
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 946
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:15.7
00:00:00:01:264 EMC: Setting Update lock: 1
00:00:00:01:350 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:384 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:404 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:424 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:445 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:467 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:472 EMC: Failed to get Power Supply revision info.
00:00:00:01:478 EMC: SXP FW Version:   04.05
00:00:00:01:483 EMC: SXP BOOT Version: 03.00
00:00:00:01:487 EMC: SXP ISTR Version: 03.05
00:00:00:01:491 EMC: MC Version:       16.01
00:00:00:01:497 EMC: DLMC Version:     14.47
00:00:00:01:501 EMC: PS Version:       00.01
00:00:00:01:505 EMC: CPLD Version:     00.13
00:00:00:15:768 WDG EXPIRED: Elapsed time since last WDG run: 229 ms
00:00:00:15:773 WDG: Pong not received from: EMA
                 

Buffer Type: SXP Trace
Buffer Id: 2
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:51.
00:00:00:01:263 EMC: Setting Update lock: 1
00:00:00:01:349 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:382 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:402 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:423 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:443 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:465 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:470 EMC: Failed to get Power Supply revision info.
00:00:00:01:476 EMC: SXP FW Version:   04.05
00:00:00:01:481 EMC: SXP BOOT Version: 03.00
00:00:00:01:485 EMC: SXP ISTR Version: 03.05
00:00:00:01:489 EMC: MC Version:       16.01
00:00:00:01:493 EMC: DLMC Version:     14.47
00:00:00:01:498 EMC: PS Version:       00.01
00:00:00:01:502 EMC: CPLD Version:     00.13
00:00:00:01:506 EMC: Base SAS Address: 50060480_00fa80c0
00:00:00:01:510 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:520 EMC: Exception flag read from register is 1
00:00:00:36:984 EMC: Setting enclosure number to 255
00:00:00:37:003 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:37:046 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:068 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:089 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:109 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:130 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:136 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:160 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:183 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:204 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:225 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:269 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:274 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:298 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:321 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:342 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:363 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:385 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:390 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:397 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:37:404 EMC: Checking for updated FW!
00:00:00:37:408 EMC: Checking for SXP FW download
00:00:00:37:436 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:37:451 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:37:456 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:51:683 WDG EXPIRED: Elapsed time since last WDG run: 792 ms
00:00:00:51:688 WDG: Pong not received from: EMA
                                              

Buffer Type: Expander Ring Buffer Trace
Buffer Id: 255
Source: Manual
SXP Major Rev: 04
SXP Minor Rev: 30
Length: -1
Timestamp: 05/27/2012 21:44:53
        
22:00:17:21.331 EMC: Flare polling state change: self NO to YES, peer NO to NO
22:00:17:21.338 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
22:00:17:21.361 EMC: DISPLAY command success, encl number=01, mode=4.
22:00:17:21.518 EMC: Other READ PAGE change detected.
22:00:17:21.522 EMC: Sending changed local info to peer.
22:00:17:21.873 EMC: Setting state change bit.
22:00:17:25.062 EMC: Clearing state change bit.
22:00:17:25.067 EMC: Setting enclosure number to 1
22:00:17:25.088 EMC: DISPLAY command success, encl number=01, mode=4.
22:00:17:25.093 EMC: Flare assigns this enclosure number = 1, generation number = 0x7e00
22:00:17:25.101 EMC: ...but already assigned!
22:00:17:25.265 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
22:00:17:36.334 EMC: Flare polling state change: self YES to YES, peer NO to YES
22:00:17:36.357 EMC: DISPLAY command success, encl number=01, mode=4.
22:00:17:36.663 Setting CPLD activity LED mode to AND because both sides being polled.
22:00:17:51.953 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
22:00:17:54.625 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
22:00:17:57.109 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
22:00:17:59.859 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
22:00:18:02.718 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
22:01:19:04.177 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
22:01:19:04.184 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
22:01:19:04.193 Setting CPLD activity LED mode to OR because both sides not being polled.
22:01:19:04.203 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
22:01:19:04.236 EMC: DISPLAY command success, encl number=01, mode=C.
22:01:19:04.350 EMC: Sending changed local info to peer.
22:01:19:08.599 EMC: Flare polling state restored because good generation number 0x7e00 received.
22:01:19:08.608 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
22:01:19:08.615 Setting CPLD activity LED mode to AND because both sides being polled.
22:01:19:08.623 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
22:01:19:08.646 EMC: Sending changed local info to peer.
22:01:19:08.658 EMC: DISPLAY command success, encl number=01, mode=4.
22:01:19:13.707 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
22:01:19:13.715 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
22:01:19:13.723 Setting CPLD activity LED mode to OR because both sides not being polled.
22:01:19:13.733 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
22:01:19:13.771 EMC: DISPLAY command success, encl number=01, mode=C.
22:01:19:13.884 EMC: Sending changed local info to peer.
22:01:19:16.230 EMC: Flare polling state restored because good generation number 0x7e00 received.
22:01:19:16.239 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
22:01:19:16.246 Setting CPLD activity LED mode to AND because both sides being polled.
22:01:19:16.254 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
22:01:19:16.277 EMC: DISPLAY command success, encl number=01, mode=4.
22:01:19:20.075 EMC: Sending changed local info to peer.
23:00:00:00.395 EMC: New Day 23
23:00:00:01.634 EMC: Resynchronizing to Flare time: 1987285437 ms; timestamp adjusted to: 0 ms.
24:00:00:00.153 EMC: New Day 24
24:00:00:02.584 EMC: Resynchronizing to Flare time: 2073690593 ms; timestamp adjusted to: 0 ms.
25:00:00:00.242 EMC: New Day 25
25:00:00:00.483 EMC: Resynchronizing to Flare time: 2160089187 ms; timestamp adjusted to: 0 ms.
26:00:00:00.072 EMC: New Day 26
26:00:00:01.371 EMC: Resynchronizing to Flare time: 2246491078 ms; timestamp adjusted to: 0 ms.
27:00:00:00.138 EMC: New Day 27
27:00:00:03.154 EMC: Resynchronizing to Flare time: 2332892968 ms; timestamp adjusted to: 0 ms.
27:01:56:22.934 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
27:01:56:22.942 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
27:01:56:22.949 Setting CPLD activity LED mode to OR because both sides not being polled.
27:01:56:22.960 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
27:01:56:22.986 EMC: DISPLAY command success, encl number=01, mode=C.
27:01:56:23.029 EMC: Sending changed local info to peer.
27:01:56:26.210 EMC: Flare polling state restored because good generation number 0x7e00 received.
27:01:56:26.219 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
27:01:56:26.226 Setting CPLD activity LED mode to AND because both sides being polled.
27:01:56:26.234 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
27:01:56:26.266 EMC: DISPLAY command success, encl number=01, mode=4.
27:01:56:26.301 EMC: Resynchronizing to Flare time: 2339793406 ms; timestamp adjusted to: 0 ms.
27:01:56:33.456 EMC: Sending changed local info to peer.
28:00:00:00.197 EMC: New Day 28
28:00:00:02.989 EMC: Resynchronizing to Flare time: 2419284968 ms; timestamp adjusted to: 0 ms.
28:02:30:43.364 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
28:02:30:43.370 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
28:02:30:43.378 Setting CPLD activity LED mode to OR because both sides not being polled.
28:02:30:43.387 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
28:02:30:43.411 EMC: DISPLAY command success, encl number=01, mode=C.
28:02:30:43.454 EMC: Sending changed local info to peer.
28:02:30:46.643 EMC: Flare polling state restored because good generation number 0x7e00 received.
28:02:30:46.651 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
28:02:30:46.658 Setting CPLD activity LED mode to AND because both sides being polled.
28:02:30:46.667 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
28:02:30:46.689 EMC: DISPLAY command success, encl number=01, mode=4.
28:02:30:46.711 EMC: Resynchronizing to Flare time: 2428255906 ms; timestamp adjusted to: 0 ms.
28:02:30:56.168 EMC: Sending changed local info to peer.
29:00:00:00.072 EMC: New Day 29
29:00:00:01.050 EMC: Resynchronizing to Flare time: 2505680281 ms; timestamp adjusted to: 0 ms.
30:00:00:00.239 EMC: New Day 30
30:00:00:00.811 EMC: Resynchronizing to Flare time: 2592088750 ms; timestamp adjusted to: 0 ms.
30:06:46:54.217 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
30:06:46:54.240 EMC: DISPLAY command success, encl number=01, mode=4.
30:06:46:54.550 Setting CPLD activity LED mode to OR because both sides not being polled.
30:06:46:57.768 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
30:06:46:57.791 EMC: DISPLAY command success, encl number=01, mode=4.
30:06:46:58.090 Setting CPLD activity LED mode to AND because both sides being polled.
31:00:00:00.213 EMC: New Day 31
31:00:00:01.685 EMC: Year 2012, Month 5
31:00:00:01.705 EMC: Resynchronizing to Flare time: 86490625 ms; timestamp adjusted to: 0 ms.
02:00:00:00.051 EMC: New Day 2
02:00:00:02.866 EMC: Resynchronizing to Flare time: 172892468 ms; timestamp adjusted to: 0 ms.
03:00:00:00.020 EMC: New Day 3
03:00:00:01.683 EMC: Resynchronizing to Flare time: 259291093 ms; timestamp adjusted to: 0 ms.
04:00:00:00.171 EMC: New Day 4
04:00:00:00.734 EMC: Resynchronizing to Flare time: 345689656 ms; timestamp adjusted to: 0 ms.
05:00:00:00.278 EMC: New Day 5
05:00:00:03.374 EMC: Resynchronizing to Flare time: 432091531 ms; timestamp adjusted to: 0 ms.
06:00:00:00.223 EMC: New Day 6
06:00:00:01.936 EMC: Resynchronizing to Flare time: 518490125 ms; timestamp adjusted to: 0 ms.
07:00:00:00.247 EMC: New Day 7
07:00:00:02.828 EMC: Resynchronizing to Flare time: 604892000 ms; timestamp adjusted to: 0 ms.
08:00:00:00.097 EMC: New Day 8
08:00:00:01.022 EMC: Resynchronizing to Flare time: 691290625 ms; timestamp adjusted to: 0 ms.
09:00:00:00.120 EMC: New Day 9
09:00:00:03.369 EMC: Resynchronizing to Flare time: 777692484 ms; timestamp adjusted to: 0 ms.
10:00:00:00.052 EMC: New Day 10
10:00:00:02.602 EMC: Resynchronizing to Flare time: 864091062 ms; timestamp adjusted to: 0 ms.
11:00:00:00.202 EMC: New Day 11
11:00:00:01.493 EMC: Resynchronizing to Flare time: 950489656 ms; timestamp adjusted to: 0 ms.
12:00:00:00.112 EMC: New Day 12
12:00:00:03.372 EMC: Resynchronizing to Flare time: 1036891562 ms; timestamp adjusted to: 0 ms.
13:00:00:00.162 EMC: New Day 13
13:00:00:00.768 EMC: Resynchronizing to Flare time: 1123290156 ms; timestamp adjusted to: 0 ms.
14:00:00:00.139 EMC: New Day 14
14:00:00:02.176 EMC: Resynchronizing to Flare time: 1209692000 ms; timestamp adjusted to: 0 ms.
15:00:00:00.135 EMC: New Day 15
15:00:00:01.307 EMC: Resynchronizing to Flare time: 1296090593 ms; timestamp adjusted to: 0 ms.
16:00:00:00.468 EMC: New Day 16
16:00:00:00.972 EMC: Resynchronizing to Flare time: 1382489187 ms; timestamp adjusted to: 0 ms.
17:00:00:00.047 EMC: New Day 17
17:00:00:03.016 EMC: Resynchronizing to Flare time: 1468891062 ms; timestamp adjusted to: 0 ms.
18:00:00:00.102 EMC: New Day 18
18:00:00:00.867 EMC: Resynchronizing to Flare time: 1555289656 ms; timestamp adjusted to: 0 ms.
19:00:00:00.363 EMC: New Day 19
19:00:00:01.875 EMC: Resynchronizing to Flare time: 1641691562 ms; timestamp adjusted to: 0 ms.
20:00:00:00.319 EMC: New Day 20
20:00:00:00.426 EMC: Resynchronizing to Flare time: 1728090125 ms; timestamp adjusted to: 0 ms.
21:00:00:00.145 EMC: New Day 21
21:00:00:02.836 EMC: Resynchronizing to Flare time: 1814492000 ms; timestamp adjusted to: 0 ms.
22:00:00:00.310 EMC: New Day 22
22:00:00:02.312 EMC: Resynchronizing to Flare time: 1900890593 ms; timestamp adjusted to: 0 ms.
23:00:00:00.051 EMC: New Day 23
23:00:00:00.913 EMC: Resynchronizing to Flare time: 1987289187 ms; timestamp adjusted to: 0 ms.
24:00:00:00.184 EMC: New Day 24
24:00:00:02.210 EMC: Resynchronizing to Flare time: 2073691093 ms; timestamp adjusted to: 0 ms.
25:00:00:00.221 EMC: New Day 25
25:00:00:03.477 EMC: Resynchronizing to Flare time: 2160092937 ms; timestamp adjusted to: 0 ms.
26:00:00:00.010 EMC: New Day 26
26:00:00:02.472 EMC: Resynchronizing to Flare time: 2246491562 ms; timestamp adjusted to: 0 ms.
27:00:00:00.030 EMC: New Day 27
27:00:00:01.336 EMC: Resynchronizing to Flare time: 2332890125 ms; timestamp adjusted to: 0 ms.
27:05:24:47.985 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
27:05:24:47.994 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
27:05:24:48.001 Setting CPLD activity LED mode to OR because both sides not being polled.
27:05:24:48.012 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
27:05:24:48.048 EMC: DISPLAY command success, encl number=01, mode=C.
27:05:24:48.157 EMC: Sending changed local info to peer.
27:05:24:52.602 EMC: Flare polling state restored because good generation number 0x7e00 received.
27:05:24:52.610 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
27:05:24:52.617 Setting CPLD activity LED mode to AND because both sides being polled.
27:05:24:52.626 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
27:05:24:52.648 EMC: DISPLAY command success, encl number=01, mode=4.
27:05:24:52.671 EMC: Resynchronizing to Flare time: 2352309015 ms; timestamp adjusted to: 0 ms.
27:05:25:09.241 EMC: Sending changed local info to peer.
                                                                                                                                                                 

Buffer Type: SXP Trace
Buffer Id: 0
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 49th at 17:03:03.
00:00:00:01:265 EMC: Setting Update lock: 1
00:00:00:01:399 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:420 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:440 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:460 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:482 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:502 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:507 EMC: Failed to get Power Supply revision info.
00:00:00:01:514 EMC: SXP FW Version:   04.05
00:00:00:01:518 EMC: SXP BOOT Version: 03.00
00:00:00:01:522 EMC: SXP ISTR Version: 03.05
00:00:00:01:526 EMC: MC Version:       16.01
00:00:00:01:531 EMC: DLMC Version:     14.47
00:00:00:01:535 EMC: PS Version:       00.01
00:00:00:01:539 EMC: CPLD Version:     00.09
00:00:00:01:543 EMC: Base SAS Address: 50060480_00b680c0
00:00:00:01:548 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:557 EMC: Exception flag read from register is 0
00:00:00:00:985 EMC: Setting enclosure number to 255
00:00:00:01:005 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:01:026 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:049 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:069 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:090 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:112 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:119 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:142 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:165 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:185 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:239 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:259 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:265 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:287 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:308 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:330 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:350 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:370 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:375 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:383 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:01:389 EMC: Checking for updated FW!
00:00:00:01:393 EMC: Checking for SXP FW download
00:00:00:01:420 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:01:435 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:01:440 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:15:669 WDG EXPIRED: Elapsed time since last WDG run: 799 ms
00:00:00:15:674 WDG: Pong not received from: EMA
                                              

Buffer Type: SXP Trace
Buffer Id: 1
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 946
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:15.7
00:00:00:01:264 EMC: Setting Update lock: 1
00:00:00:01:350 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:384 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:404 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:424 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:445 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:467 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:472 EMC: Failed to get Power Supply revision info.
00:00:00:01:478 EMC: SXP FW Version:   04.05
00:00:00:01:483 EMC: SXP BOOT Version: 03.00
00:00:00:01:487 EMC: SXP ISTR Version: 03.05
00:00:00:01:491 EMC: MC Version:       16.01
00:00:00:01:497 EMC: DLMC Version:     14.47
00:00:00:01:501 EMC: PS Version:       00.01
00:00:00:01:505 EMC: CPLD Version:     00.13
00:00:00:15:768 WDG EXPIRED: Elapsed time since last WDG run: 229 ms
00:00:00:15:773 WDG: Pong not received from: EMA
                 

Buffer Type: SXP Trace
Buffer Id: 2
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:51.
00:00:00:01:263 EMC: Setting Update lock: 1
00:00:00:01:349 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:382 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:402 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:423 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:443 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:465 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:470 EMC: Failed to get Power Supply revision info.
00:00:00:01:476 EMC: SXP FW Version:   04.05
00:00:00:01:481 EMC: SXP BOOT Version: 03.00
00:00:00:01:485 EMC: SXP ISTR Version: 03.05
00:00:00:01:489 EMC: MC Version:       16.01
00:00:00:01:493 EMC: DLMC Version:     14.47
00:00:00:01:498 EMC: PS Version:       00.01
00:00:00:01:502 EMC: CPLD Version:     00.13
00:00:00:01:506 EMC: Base SAS Address: 50060480_00fa80c0
00:00:00:01:510 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:520 EMC: Exception flag read from register is 1
00:00:00:36:984 EMC: Setting enclosure number to 255
00:00:00:37:003 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:37:046 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:068 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:089 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:109 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:130 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:136 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:160 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:183 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:204 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:225 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:269 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:274 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:298 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:321 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:342 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:363 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:385 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:390 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:397 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:37:404 EMC: Checking for updated FW!
00:00:00:37:408 EMC: Checking for SXP FW download
00:00:00:37:436 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:37:451 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:37:456 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:51:683 WDG EXPIRED: Elapsed time since last WDG run: 792 ms
00:00:00:51:688 WDG: Pong not received from: EMA
                                              

Buffer Type: Expander Ring Buffer Trace
Buffer Id: 255
Source: Manual
SXP Major Rev: 04
SXP Minor Rev: 30
Length: -1
Timestamp: 05/27/2012 22:10:52
        
22:00:17:21.331 EMC: Flare polling state change: self NO to YES, peer NO to NO
22:00:17:21.338 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
22:00:17:21.361 EMC: DISPLAY command success, encl number=01, mode=4.
22:00:17:21.518 EMC: Other READ PAGE change detected.
22:00:17:21.522 EMC: Sending changed local info to peer.
22:00:17:21.873 EMC: Setting state change bit.
22:00:17:25.062 EMC: Clearing state change bit.
22:00:17:25.067 EMC: Setting enclosure number to 1
22:00:17:25.088 EMC: DISPLAY command success, encl number=01, mode=4.
22:00:17:25.093 EMC: Flare assigns this enclosure number = 1, generation number = 0x7e00
22:00:17:25.101 EMC: ...but already assigned!
22:00:17:25.265 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
22:00:17:36.334 EMC: Flare polling state change: self YES to YES, peer NO to YES
22:00:17:36.357 EMC: DISPLAY command success, encl number=01, mode=4.
22:00:17:36.663 Setting CPLD activity LED mode to AND because both sides being polled.
22:00:17:51.953 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
22:00:17:54.625 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
22:00:17:57.109 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
22:00:17:59.859 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
22:00:18:02.718 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
22:01:19:04.177 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
22:01:19:04.184 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
22:01:19:04.193 Setting CPLD activity LED mode to OR because both sides not being polled.
22:01:19:04.203 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
22:01:19:04.236 EMC: DISPLAY command success, encl number=01, mode=C.
22:01:19:04.350 EMC: Sending changed local info to peer.
22:01:19:08.599 EMC: Flare polling state restored because good generation number 0x7e00 received.
22:01:19:08.608 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
22:01:19:08.615 Setting CPLD activity LED mode to AND because both sides being polled.
22:01:19:08.623 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
22:01:19:08.646 EMC: Sending changed local info to peer.
22:01:19:08.658 EMC: DISPLAY command success, encl number=01, mode=4.
22:01:19:13.707 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
22:01:19:13.715 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
22:01:19:13.723 Setting CPLD activity LED mode to OR because both sides not being polled.
22:01:19:13.733 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
22:01:19:13.771 EMC: DISPLAY command success, encl number=01, mode=C.
22:01:19:13.884 EMC: Sending changed local info to peer.
22:01:19:16.230 EMC: Flare polling state restored because good generation number 0x7e00 received.
22:01:19:16.239 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
22:01:19:16.246 Setting CPLD activity LED mode to AND because both sides being polled.
22:01:19:16.254 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
22:01:19:16.277 EMC: DISPLAY command success, encl number=01, mode=4.
22:01:19:20.075 EMC: Sending changed local info to peer.
23:00:00:00.395 EMC: New Day 23
23:00:00:01.634 EMC: Resynchronizing to Flare time: 1987285437 ms; timestamp adjusted to: 0 ms.
24:00:00:00.153 EMC: New Day 24
24:00:00:02.584 EMC: Resynchronizing to Flare time: 2073690593 ms; timestamp adjusted to: 0 ms.
25:00:00:00.242 EMC: New Day 25
25:00:00:00.483 EMC: Resynchronizing to Flare time: 2160089187 ms; timestamp adjusted to: 0 ms.
26:00:00:00.072 EMC: New Day 26
26:00:00:01.371 EMC: Resynchronizing to Flare time: 2246491078 ms; timestamp adjusted to: 0 ms.
27:00:00:00.138 EMC: New Day 27
27:00:00:03.154 EMC: Resynchronizing to Flare time: 2332892968 ms; timestamp adjusted to: 0 ms.
27:01:56:22.934 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
27:01:56:22.942 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
27:01:56:22.949 Setting CPLD activity LED mode to OR because both sides not being polled.
27:01:56:22.960 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
27:01:56:22.986 EMC: DISPLAY command success, encl number=01, mode=C.
27:01:56:23.029 EMC: Sending changed local info to peer.
27:01:56:26.210 EMC: Flare polling state restored because good generation number 0x7e00 received.
27:01:56:26.219 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
27:01:56:26.226 Setting CPLD activity LED mode to AND because both sides being polled.
27:01:56:26.234 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
27:01:56:26.266 EMC: DISPLAY command success, encl number=01, mode=4.
27:01:56:26.301 EMC: Resynchronizing to Flare time: 2339793406 ms; timestamp adjusted to: 0 ms.
27:01:56:33.456 EMC: Sending changed local info to peer.
28:00:00:00.197 EMC: New Day 28
28:00:00:02.989 EMC: Resynchronizing to Flare time: 2419284968 ms; timestamp adjusted to: 0 ms.
28:02:30:43.364 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
28:02:30:43.370 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
28:02:30:43.378 Setting CPLD activity LED mode to OR because both sides not being polled.
28:02:30:43.387 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
28:02:30:43.411 EMC: DISPLAY command success, encl number=01, mode=C.
28:02:30:43.454 EMC: Sending changed local info to peer.
28:02:30:46.643 EMC: Flare polling state restored because good generation number 0x7e00 received.
28:02:30:46.651 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
28:02:30:46.658 Setting CPLD activity LED mode to AND because both sides being polled.
28:02:30:46.667 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
28:02:30:46.689 EMC: DISPLAY command success, encl number=01, mode=4.
28:02:30:46.711 EMC: Resynchronizing to Flare time: 2428255906 ms; timestamp adjusted to: 0 ms.
28:02:30:56.168 EMC: Sending changed local info to peer.
29:00:00:00.072 EMC: New Day 29
29:00:00:01.050 EMC: Resynchronizing to Flare time: 2505680281 ms; timestamp adjusted to: 0 ms.
30:00:00:00.239 EMC: New Day 30
30:00:00:00.811 EMC: Resynchronizing to Flare time: 2592088750 ms; timestamp adjusted to: 0 ms.
30:06:46:54.217 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
30:06:46:54.240 EMC: DISPLAY command success, encl number=01, mode=4.
30:06:46:54.550 Setting CPLD activity LED mode to OR because both sides not being polled.
30:06:46:57.768 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
30:06:46:57.791 EMC: DISPLAY command success, encl number=01, mode=4.
30:06:46:58.090 Setting CPLD activity LED mode to AND because both sides being polled.
31:00:00:00.213 EMC: New Day 31
31:00:00:01.685 EMC: Year 2012, Month 5
31:00:00:01.705 EMC: Resynchronizing to Flare time: 86490625 ms; timestamp adjusted to: 0 ms.
02:00:00:00.051 EMC: New Day 2
02:00:00:02.866 EMC: Resynchronizing to Flare time: 172892468 ms; timestamp adjusted to: 0 ms.
03:00:00:00.020 EMC: New Day 3
03:00:00:01.683 EMC: Resynchronizing to Flare time: 259291093 ms; timestamp adjusted to: 0 ms.
04:00:00:00.171 EMC: New Day 4
04:00:00:00.734 EMC: Resynchronizing to Flare time: 345689656 ms; timestamp adjusted to: 0 ms.
05:00:00:00.278 EMC: New Day 5
05:00:00:03.374 EMC: Resynchronizing to Flare time: 432091531 ms; timestamp adjusted to: 0 ms.
06:00:00:00.223 EMC: New Day 6
06:00:00:01.936 EMC: Resynchronizing to Flare time: 518490125 ms; timestamp adjusted to: 0 ms.
07:00:00:00.247 EMC: New Day 7
07:00:00:02.828 EMC: Resynchronizing to Flare time: 604892000 ms; timestamp adjusted to: 0 ms.
08:00:00:00.097 EMC: New Day 8
08:00:00:01.022 EMC: Resynchronizing to Flare time: 691290625 ms; timestamp adjusted to: 0 ms.
09:00:00:00.120 EMC: New Day 9
09:00:00:03.369 EMC: Resynchronizing to Flare time: 777692484 ms; timestamp adjusted to: 0 ms.
10:00:00:00.052 EMC: New Day 10
10:00:00:02.602 EMC: Resynchronizing to Flare time: 864091062 ms; timestamp adjusted to: 0 ms.
11:00:00:00.202 EMC: New Day 11
11:00:00:01.493 EMC: Resynchronizing to Flare time: 950489656 ms; timestamp adjusted to: 0 ms.
12:00:00:00.112 EMC: New Day 12
12:00:00:03.372 EMC: Resynchronizing to Flare time: 1036891562 ms; timestamp adjusted to: 0 ms.
13:00:00:00.162 EMC: New Day 13
13:00:00:00.768 EMC: Resynchronizing to Flare time: 1123290156 ms; timestamp adjusted to: 0 ms.
14:00:00:00.139 EMC: New Day 14
14:00:00:02.176 EMC: Resynchronizing to Flare time: 1209692000 ms; timestamp adjusted to: 0 ms.
15:00:00:00.135 EMC: New Day 15
15:00:00:01.307 EMC: Resynchronizing to Flare time: 1296090593 ms; timestamp adjusted to: 0 ms.
16:00:00:00.468 EMC: New Day 16
16:00:00:00.972 EMC: Resynchronizing to Flare time: 1382489187 ms; timestamp adjusted to: 0 ms.
17:00:00:00.047 EMC: New Day 17
17:00:00:03.016 EMC: Resynchronizing to Flare time: 1468891062 ms; timestamp adjusted to: 0 ms.
18:00:00:00.102 EMC: New Day 18
18:00:00:00.867 EMC: Resynchronizing to Flare time: 1555289656 ms; timestamp adjusted to: 0 ms.
19:00:00:00.363 EMC: New Day 19
19:00:00:01.875 EMC: Resynchronizing to Flare time: 1641691562 ms; timestamp adjusted to: 0 ms.
20:00:00:00.319 EMC: New Day 20
20:00:00:00.426 EMC: Resynchronizing to Flare time: 1728090125 ms; timestamp adjusted to: 0 ms.
21:00:00:00.145 EMC: New Day 21
21:00:00:02.836 EMC: Resynchronizing to Flare time: 1814492000 ms; timestamp adjusted to: 0 ms.
22:00:00:00.310 EMC: New Day 22
22:00:00:02.312 EMC: Resynchronizing to Flare time: 1900890593 ms; timestamp adjusted to: 0 ms.
23:00:00:00.051 EMC: New Day 23
23:00:00:00.913 EMC: Resynchronizing to Flare time: 1987289187 ms; timestamp adjusted to: 0 ms.
24:00:00:00.184 EMC: New Day 24
24:00:00:02.210 EMC: Resynchronizing to Flare time: 2073691093 ms; timestamp adjusted to: 0 ms.
25:00:00:00.221 EMC: New Day 25
25:00:00:03.477 EMC: Resynchronizing to Flare time: 2160092937 ms; timestamp adjusted to: 0 ms.
26:00:00:00.010 EMC: New Day 26
26:00:00:02.472 EMC: Resynchronizing to Flare time: 2246491562 ms; timestamp adjusted to: 0 ms.
27:00:00:00.030 EMC: New Day 27
27:00:00:01.336 EMC: Resynchronizing to Flare time: 2332890125 ms; timestamp adjusted to: 0 ms.
27:05:24:47.985 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
27:05:24:47.994 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
27:05:24:48.001 Setting CPLD activity LED mode to OR because both sides not being polled.
27:05:24:48.012 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
27:05:24:48.048 EMC: DISPLAY command success, encl number=01, mode=C.
27:05:24:48.157 EMC: Sending changed local info to peer.
27:05:24:52.602 EMC: Flare polling state restored because good generation number 0x7e00 received.
27:05:24:52.610 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
27:05:24:52.617 Setting CPLD activity LED mode to AND because both sides being polled.
27:05:24:52.626 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
27:05:24:52.648 EMC: DISPLAY command success, encl number=01, mode=4.
27:05:24:52.671 EMC: Resynchronizing to Flare time: 2352309015 ms; timestamp adjusted to: 0 ms.
27:05:25:09.241 EMC: Sending changed local info to peer.
                                                                                                                                                                 

Buffer Type: SXP Trace
Buffer Id: 0
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 49th at 17:03:03.
00:00:00:01:265 EMC: Setting Update lock: 1
00:00:00:01:399 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:420 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:440 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:460 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:482 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:502 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:507 EMC: Failed to get Power Supply revision info.
00:00:00:01:514 EMC: SXP FW Version:   04.05
00:00:00:01:518 EMC: SXP BOOT Version: 03.00
00:00:00:01:522 EMC: SXP ISTR Version: 03.05
00:00:00:01:526 EMC: MC Version:       16.01
00:00:00:01:531 EMC: DLMC Version:     14.47
00:00:00:01:535 EMC: PS Version:       00.01
00:00:00:01:539 EMC: CPLD Version:     00.09
00:00:00:01:543 EMC: Base SAS Address: 50060480_00b680c0
00:00:00:01:548 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:557 EMC: Exception flag read from register is 0
00:00:00:00:985 EMC: Setting enclosure number to 255
00:00:00:01:005 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:01:026 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:049 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:069 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:090 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:112 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:119 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:142 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:165 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:185 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:239 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:259 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:265 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:287 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:308 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:330 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:350 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:370 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:375 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:383 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:01:389 EMC: Checking for updated FW!
00:00:00:01:393 EMC: Checking for SXP FW download
00:00:00:01:420 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:01:435 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:01:440 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:15:669 WDG EXPIRED: Elapsed time since last WDG run: 799 ms
00:00:00:15:674 WDG: Pong not received from: EMA
                                              

Buffer Type: SXP Trace
Buffer Id: 1
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 946
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:15.7
00:00:00:01:264 EMC: Setting Update lock: 1
00:00:00:01:350 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:384 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:404 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:424 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:445 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:467 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:472 EMC: Failed to get Power Supply revision info.
00:00:00:01:478 EMC: SXP FW Version:   04.05
00:00:00:01:483 EMC: SXP BOOT Version: 03.00
00:00:00:01:487 EMC: SXP ISTR Version: 03.05
00:00:00:01:491 EMC: MC Version:       16.01
00:00:00:01:497 EMC: DLMC Version:     14.47
00:00:00:01:501 EMC: PS Version:       00.01
00:00:00:01:505 EMC: CPLD Version:     00.13
00:00:00:15:768 WDG EXPIRED: Elapsed time since last WDG run: 229 ms
00:00:00:15:773 WDG: Pong not received from: EMA
                 

Buffer Type: SXP Trace
Buffer Id: 2
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:51.
00:00:00:01:263 EMC: Setting Update lock: 1
00:00:00:01:349 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:382 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:402 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:423 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:443 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:465 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:470 EMC: Failed to get Power Supply revision info.
00:00:00:01:476 EMC: SXP FW Version:   04.05
00:00:00:01:481 EMC: SXP BOOT Version: 03.00
00:00:00:01:485 EMC: SXP ISTR Version: 03.05
00:00:00:01:489 EMC: MC Version:       16.01
00:00:00:01:493 EMC: DLMC Version:     14.47
00:00:00:01:498 EMC: PS Version:       00.01
00:00:00:01:502 EMC: CPLD Version:     00.13
00:00:00:01:506 EMC: Base SAS Address: 50060480_00fa80c0
00:00:00:01:510 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:520 EMC: Exception flag read from register is 1
00:00:00:36:984 EMC: Setting enclosure number to 255
00:00:00:37:003 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:37:046 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:068 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:089 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:109 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:130 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:136 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:160 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:183 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:204 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:225 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:269 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:274 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:298 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:321 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:342 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:363 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:385 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:390 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:397 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:37:404 EMC: Checking for updated FW!
00:00:00:37:408 EMC: Checking for SXP FW download
00:00:00:37:436 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:37:451 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:37:456 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:51:683 WDG EXPIRED: Elapsed time since last WDG run: 792 ms
00:00:00:51:688 WDG: Pong not received from: EMA
                                              

Buffer Type: Expander Ring Buffer Trace
Buffer Id: 255
Source: Manual
SXP Major Rev: 04
SXP Minor Rev: 30
Length: -1
Timestamp: 05/27/2012 23:34:15
        
22:00:17:21.331 EMC: Flare polling state change: self NO to YES, peer NO to NO
22:00:17:21.338 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
22:00:17:21.361 EMC: DISPLAY command success, encl number=01, mode=4.
22:00:17:21.518 EMC: Other READ PAGE change detected.
22:00:17:21.522 EMC: Sending changed local info to peer.
22:00:17:21.873 EMC: Setting state change bit.
22:00:17:25.062 EMC: Clearing state change bit.
22:00:17:25.067 EMC: Setting enclosure number to 1
22:00:17:25.088 EMC: DISPLAY command success, encl number=01, mode=4.
22:00:17:25.093 EMC: Flare assigns this enclosure number = 1, generation number = 0x7e00
22:00:17:25.101 EMC: ...but already assigned!
22:00:17:25.265 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
22:00:17:36.334 EMC: Flare polling state change: self YES to YES, peer NO to YES
22:00:17:36.357 EMC: DISPLAY command success, encl number=01, mode=4.
22:00:17:36.663 Setting CPLD activity LED mode to AND because both sides being polled.
22:00:17:51.953 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
22:00:17:54.625 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
22:00:17:57.109 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
22:00:17:59.859 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
22:00:18:02.718 EMC: Host requesting LED OFF for Power,Encl,SEB/SP,slot 0,1,2,3,4,5,6,7,8,9,10,11
22:01:19:04.177 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
22:01:19:04.184 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
22:01:19:04.193 Setting CPLD activity LED mode to OR because both sides not being polled.
22:01:19:04.203 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
22:01:19:04.236 EMC: DISPLAY command success, encl number=01, mode=C.
22:01:19:04.350 EMC: Sending changed local info to peer.
22:01:19:08.599 EMC: Flare polling state restored because good generation number 0x7e00 received.
22:01:19:08.608 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
22:01:19:08.615 Setting CPLD activity LED mode to AND because both sides being polled.
22:01:19:08.623 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
22:01:19:08.646 EMC: Sending changed local info to peer.
22:01:19:08.658 EMC: DISPLAY command success, encl number=01, mode=4.
22:01:19:13.707 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
22:01:19:13.715 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
22:01:19:13.723 Setting CPLD activity LED mode to OR because both sides not being polled.
22:01:19:13.733 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
22:01:19:13.771 EMC: DISPLAY command success, encl number=01, mode=C.
22:01:19:13.884 EMC: Sending changed local info to peer.
22:01:19:16.230 EMC: Flare polling state restored because good generation number 0x7e00 received.
22:01:19:16.239 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
22:01:19:16.246 Setting CPLD activity LED mode to AND because both sides being polled.
22:01:19:16.254 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
22:01:19:16.277 EMC: DISPLAY command success, encl number=01, mode=4.
22:01:19:20.075 EMC: Sending changed local info to peer.
23:00:00:00.395 EMC: New Day 23
23:00:00:01.634 EMC: Resynchronizing to Flare time: 1987285437 ms; timestamp adjusted to: 0 ms.
24:00:00:00.153 EMC: New Day 24
24:00:00:02.584 EMC: Resynchronizing to Flare time: 2073690593 ms; timestamp adjusted to: 0 ms.
25:00:00:00.242 EMC: New Day 25
25:00:00:00.483 EMC: Resynchronizing to Flare time: 2160089187 ms; timestamp adjusted to: 0 ms.
26:00:00:00.072 EMC: New Day 26
26:00:00:01.371 EMC: Resynchronizing to Flare time: 2246491078 ms; timestamp adjusted to: 0 ms.
27:00:00:00.138 EMC: New Day 27
27:00:00:03.154 EMC: Resynchronizing to Flare time: 2332892968 ms; timestamp adjusted to: 0 ms.
27:01:56:22.934 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
27:01:56:22.942 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
27:01:56:22.949 Setting CPLD activity LED mode to OR because both sides not being polled.
27:01:56:22.960 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
27:01:56:22.986 EMC: DISPLAY command success, encl number=01, mode=C.
27:01:56:23.029 EMC: Sending changed local info to peer.
27:01:56:26.210 EMC: Flare polling state restored because good generation number 0x7e00 received.
27:01:56:26.219 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
27:01:56:26.226 Setting CPLD activity LED mode to AND because both sides being polled.
27:01:56:26.234 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
27:01:56:26.266 EMC: DISPLAY command success, encl number=01, mode=4.
27:01:56:26.301 EMC: Resynchronizing to Flare time: 2339793406 ms; timestamp adjusted to: 0 ms.
27:01:56:33.456 EMC: Sending changed local info to peer.
28:00:00:00.197 EMC: New Day 28
28:00:00:02.989 EMC: Resynchronizing to Flare time: 2419284968 ms; timestamp adjusted to: 0 ms.
28:02:30:43.364 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
28:02:30:43.370 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
28:02:30:43.378 Setting CPLD activity LED mode to OR because both sides not being polled.
28:02:30:43.387 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
28:02:30:43.411 EMC: DISPLAY command success, encl number=01, mode=C.
28:02:30:43.454 EMC: Sending changed local info to peer.
28:02:30:46.643 EMC: Flare polling state restored because good generation number 0x7e00 received.
28:02:30:46.651 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
28:02:30:46.658 Setting CPLD activity LED mode to AND because both sides being polled.
28:02:30:46.667 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
28:02:30:46.689 EMC: DISPLAY command success, encl number=01, mode=4.
28:02:30:46.711 EMC: Resynchronizing to Flare time: 2428255906 ms; timestamp adjusted to: 0 ms.
28:02:30:56.168 EMC: Sending changed local info to peer.
29:00:00:00.072 EMC: New Day 29
29:00:00:01.050 EMC: Resynchronizing to Flare time: 2505680281 ms; timestamp adjusted to: 0 ms.
30:00:00:00.239 EMC: New Day 30
30:00:00:00.811 EMC: Resynchronizing to Flare time: 2592088750 ms; timestamp adjusted to: 0 ms.
30:06:46:54.217 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
30:06:46:54.240 EMC: DISPLAY command success, encl number=01, mode=4.
30:06:46:54.550 Setting CPLD activity LED mode to OR because both sides not being polled.
30:06:46:57.768 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
30:06:46:57.791 EMC: DISPLAY command success, encl number=01, mode=4.
30:06:46:58.090 Setting CPLD activity LED mode to AND because both sides being polled.
31:00:00:00.213 EMC: New Day 31
31:00:00:01.685 EMC: Year 2012, Month 5
31:00:00:01.705 EMC: Resynchronizing to Flare time: 86490625 ms; timestamp adjusted to: 0 ms.
02:00:00:00.051 EMC: New Day 2
02:00:00:02.866 EMC: Resynchronizing to Flare time: 172892468 ms; timestamp adjusted to: 0 ms.
03:00:00:00.020 EMC: New Day 3
03:00:00:01.683 EMC: Resynchronizing to Flare time: 259291093 ms; timestamp adjusted to: 0 ms.
04:00:00:00.171 EMC: New Day 4
04:00:00:00.734 EMC: Resynchronizing to Flare time: 345689656 ms; timestamp adjusted to: 0 ms.
05:00:00:00.278 EMC: New Day 5
05:00:00:03.374 EMC: Resynchronizing to Flare time: 432091531 ms; timestamp adjusted to: 0 ms.
06:00:00:00.223 EMC: New Day 6
06:00:00:01.936 EMC: Resynchronizing to Flare time: 518490125 ms; timestamp adjusted to: 0 ms.
07:00:00:00.247 EMC: New Day 7
07:00:00:02.828 EMC: Resynchronizing to Flare time: 604892000 ms; timestamp adjusted to: 0 ms.
08:00:00:00.097 EMC: New Day 8
08:00:00:01.022 EMC: Resynchronizing to Flare time: 691290625 ms; timestamp adjusted to: 0 ms.
09:00:00:00.120 EMC: New Day 9
09:00:00:03.369 EMC: Resynchronizing to Flare time: 777692484 ms; timestamp adjusted to: 0 ms.
10:00:00:00.052 EMC: New Day 10
10:00:00:02.602 EMC: Resynchronizing to Flare time: 864091062 ms; timestamp adjusted to: 0 ms.
11:00:00:00.202 EMC: New Day 11
11:00:00:01.493 EMC: Resynchronizing to Flare time: 950489656 ms; timestamp adjusted to: 0 ms.
12:00:00:00.112 EMC: New Day 12
12:00:00:03.372 EMC: Resynchronizing to Flare time: 1036891562 ms; timestamp adjusted to: 0 ms.
13:00:00:00.162 EMC: New Day 13
13:00:00:00.768 EMC: Resynchronizing to Flare time: 1123290156 ms; timestamp adjusted to: 0 ms.
14:00:00:00.139 EMC: New Day 14
14:00:00:02.176 EMC: Resynchronizing to Flare time: 1209692000 ms; timestamp adjusted to: 0 ms.
15:00:00:00.135 EMC: New Day 15
15:00:00:01.307 EMC: Resynchronizing to Flare time: 1296090593 ms; timestamp adjusted to: 0 ms.
16:00:00:00.468 EMC: New Day 16
16:00:00:00.972 EMC: Resynchronizing to Flare time: 1382489187 ms; timestamp adjusted to: 0 ms.
17:00:00:00.047 EMC: New Day 17
17:00:00:03.016 EMC: Resynchronizing to Flare time: 1468891062 ms; timestamp adjusted to: 0 ms.
18:00:00:00.102 EMC: New Day 18
18:00:00:00.867 EMC: Resynchronizing to Flare time: 1555289656 ms; timestamp adjusted to: 0 ms.
19:00:00:00.363 EMC: New Day 19
19:00:00:01.875 EMC: Resynchronizing to Flare time: 1641691562 ms; timestamp adjusted to: 0 ms.
20:00:00:00.319 EMC: New Day 20
20:00:00:00.426 EMC: Resynchronizing to Flare time: 1728090125 ms; timestamp adjusted to: 0 ms.
21:00:00:00.145 EMC: New Day 21
21:00:00:02.836 EMC: Resynchronizing to Flare time: 1814492000 ms; timestamp adjusted to: 0 ms.
22:00:00:00.310 EMC: New Day 22
22:00:00:02.312 EMC: Resynchronizing to Flare time: 1900890593 ms; timestamp adjusted to: 0 ms.
23:00:00:00.051 EMC: New Day 23
23:00:00:00.913 EMC: Resynchronizing to Flare time: 1987289187 ms; timestamp adjusted to: 0 ms.
24:00:00:00.184 EMC: New Day 24
24:00:00:02.210 EMC: Resynchronizing to Flare time: 2073691093 ms; timestamp adjusted to: 0 ms.
25:00:00:00.221 EMC: New Day 25
25:00:00:03.477 EMC: Resynchronizing to Flare time: 2160092937 ms; timestamp adjusted to: 0 ms.
26:00:00:00.010 EMC: New Day 26
26:00:00:02.472 EMC: Resynchronizing to Flare time: 2246491562 ms; timestamp adjusted to: 0 ms.
27:00:00:00.030 EMC: New Day 27
27:00:00:01.336 EMC: Resynchronizing to Flare time: 2332890125 ms; timestamp adjusted to: 0 ms.
27:05:24:47.985 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
27:05:24:47.994 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
27:05:24:48.001 Setting CPLD activity LED mode to OR because both sides not being polled.
27:05:24:48.012 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
27:05:24:48.048 EMC: DISPLAY command success, encl number=01, mode=C.
27:05:24:48.157 EMC: Sending changed local info to peer.
27:05:24:52.602 EMC: Flare polling state restored because good generation number 0x7e00 received.
27:05:24:52.610 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
27:05:24:52.617 Setting CPLD activity LED mode to AND because both sides being polled.
27:05:24:52.626 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
27:05:24:52.648 EMC: DISPLAY command success, encl number=01, mode=4.
27:05:24:52.671 EMC: Resynchronizing to Flare time: 2352309015 ms; timestamp adjusted to: 0 ms.
27:05:25:09.241 EMC: Sending changed local info to peer.
                                                                                                                                                                 

Buffer Type: SXP Trace
Buffer Id: 0
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 49th at 17:03:03.
00:00:00:01:265 EMC: Setting Update lock: 1
00:00:00:01:399 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:420 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:440 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:460 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:482 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:502 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:507 EMC: Failed to get Power Supply revision info.
00:00:00:01:514 EMC: SXP FW Version:   04.05
00:00:00:01:518 EMC: SXP BOOT Version: 03.00
00:00:00:01:522 EMC: SXP ISTR Version: 03.05
00:00:00:01:526 EMC: MC Version:       16.01
00:00:00:01:531 EMC: DLMC Version:     14.47
00:00:00:01:535 EMC: PS Version:       00.01
00:00:00:01:539 EMC: CPLD Version:     00.09
00:00:00:01:543 EMC: Base SAS Address: 50060480_00b680c0
00:00:00:01:548 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:557 EMC: Exception flag read from register is 0
00:00:00:00:985 EMC: Setting enclosure number to 255
00:00:00:01:005 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:01:026 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:049 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:069 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:090 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:112 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:119 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:142 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:165 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:185 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:239 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:259 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:265 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:287 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:308 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:330 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:350 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:370 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:375 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:383 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:01:389 EMC: Checking for updated FW!
00:00:00:01:393 EMC: Checking for SXP FW download
00:00:00:01:420 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:01:435 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:01:440 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:15:669 WDG EXPIRED: Elapsed time since last WDG run: 799 ms
00:00:00:15:674 WDG: Pong not received from: EMA
                                              

Buffer Type: SXP Trace
Buffer Id: 1
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 946
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:15.7
00:00:00:01:264 EMC: Setting Update lock: 1
00:00:00:01:350 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:384 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:404 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:424 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:445 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:467 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:472 EMC: Failed to get Power Supply revision info.
00:00:00:01:478 EMC: SXP FW Version:   04.05
00:00:00:01:483 EMC: SXP BOOT Version: 03.00
00:00:00:01:487 EMC: SXP ISTR Version: 03.05
00:00:00:01:491 EMC: MC Version:       16.01
00:00:00:01:497 EMC: DLMC Version:     14.47
00:00:00:01:501 EMC: PS Version:       00.01
00:00:00:01:505 EMC: CPLD Version:     00.13
00:00:00:15:768 WDG EXPIRED: Elapsed time since last WDG run: 229 ms
00:00:00:15:773 WDG: Pong not received from: EMA
                 

Buffer Type: SXP Trace
Buffer Id: 2
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:51.
00:00:00:01:263 EMC: Setting Update lock: 1
00:00:00:01:349 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:382 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:402 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:423 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:443 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:465 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:470 EMC: Failed to get Power Supply revision info.
00:00:00:01:476 EMC: SXP FW Version:   04.05
00:00:00:01:481 EMC: SXP BOOT Version: 03.00
00:00:00:01:485 EMC: SXP ISTR Version: 03.05
00:00:00:01:489 EMC: MC Version:       16.01
00:00:00:01:493 EMC: DLMC Version:     14.47
00:00:00:01:498 EMC: PS Version:       00.01
00:00:00:01:502 EMC: CPLD Version:     00.13
00:00:00:01:506 EMC: Base SAS Address: 50060480_00fa80c0
00:00:00:01:510 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:520 EMC: Exception flag read from register is 1
00:00:00:36:984 EMC: Setting enclosure number to 255
00:00:00:37:003 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:37:046 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:068 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:089 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:109 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:130 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:136 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:160 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:183 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:204 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:225 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:269 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:274 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:298 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:321 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:342 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:363 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:385 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:390 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:397 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:37:404 EMC: Checking for updated FW!
00:00:00:37:408 EMC: Checking for SXP FW download
00:00:00:37:436 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:37:451 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:37:456 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:51:683 WDG EXPIRED: Elapsed time since last WDG run: 792 ms
00:00:00:51:688 WDG: Pong not received from: EMA
                                              

Buffer Type: Expander Ring Buffer Trace
Buffer Id: 255
Source: Manual
SXP Major Rev: 04
SXP Minor Rev: 30
Length: -1
Timestamp: 06/04/2012 13:40:19
        
28:02:30:43.370 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
28:02:30:43.378 Setting CPLD activity LED mode to OR because both sides not being polled.
28:02:30:43.387 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
28:02:30:43.411 EMC: DISPLAY command success, encl number=01, mode=C.
28:02:30:43.454 EMC: Sending changed local info to peer.
28:02:30:46.643 EMC: Flare polling state restored because good generation number 0x7e00 received.
28:02:30:46.651 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
28:02:30:46.658 Setting CPLD activity LED mode to AND because both sides being polled.
28:02:30:46.667 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
28:02:30:46.689 EMC: DISPLAY command success, encl number=01, mode=4.
28:02:30:46.711 EMC: Resynchronizing to Flare time: 2428255906 ms; timestamp adjusted to: 0 ms.
28:02:30:56.168 EMC: Sending changed local info to peer.
29:00:00:00.072 EMC: New Day 29
29:00:00:01.050 EMC: Resynchronizing to Flare time: 2505680281 ms; timestamp adjusted to: 0 ms.
30:00:00:00.239 EMC: New Day 30
30:00:00:00.811 EMC: Resynchronizing to Flare time: 2592088750 ms; timestamp adjusted to: 0 ms.
30:06:46:54.217 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
30:06:46:54.240 EMC: DISPLAY command success, encl number=01, mode=4.
30:06:46:54.550 Setting CPLD activity LED mode to OR because both sides not being polled.
30:06:46:57.768 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
30:06:46:57.791 EMC: DISPLAY command success, encl number=01, mode=4.
30:06:46:58.090 Setting CPLD activity LED mode to AND because both sides being polled.
31:00:00:00.213 EMC: New Day 31
31:00:00:01.685 EMC: Year 2012, Month 5
31:00:00:01.705 EMC: Resynchronizing to Flare time: 86490625 ms; timestamp adjusted to: 0 ms.
02:00:00:00.051 EMC: New Day 2
02:00:00:02.866 EMC: Resynchronizing to Flare time: 172892468 ms; timestamp adjusted to: 0 ms.
03:00:00:00.020 EMC: New Day 3
03:00:00:01.683 EMC: Resynchronizing to Flare time: 259291093 ms; timestamp adjusted to: 0 ms.
04:00:00:00.171 EMC: New Day 4
04:00:00:00.734 EMC: Resynchronizing to Flare time: 345689656 ms; timestamp adjusted to: 0 ms.
05:00:00:00.278 EMC: New Day 5
05:00:00:03.374 EMC: Resynchronizing to Flare time: 432091531 ms; timestamp adjusted to: 0 ms.
06:00:00:00.223 EMC: New Day 6
06:00:00:01.936 EMC: Resynchronizing to Flare time: 518490125 ms; timestamp adjusted to: 0 ms.
07:00:00:00.247 EMC: New Day 7
07:00:00:02.828 EMC: Resynchronizing to Flare time: 604892000 ms; timestamp adjusted to: 0 ms.
08:00:00:00.097 EMC: New Day 8
08:00:00:01.022 EMC: Resynchronizing to Flare time: 691290625 ms; timestamp adjusted to: 0 ms.
09:00:00:00.120 EMC: New Day 9
09:00:00:03.369 EMC: Resynchronizing to Flare time: 777692484 ms; timestamp adjusted to: 0 ms.
10:00:00:00.052 EMC: New Day 10
10:00:00:02.602 EMC: Resynchronizing to Flare time: 864091062 ms; timestamp adjusted to: 0 ms.
11:00:00:00.202 EMC: New Day 11
11:00:00:01.493 EMC: Resynchronizing to Flare time: 950489656 ms; timestamp adjusted to: 0 ms.
12:00:00:00.112 EMC: New Day 12
12:00:00:03.372 EMC: Resynchronizing to Flare time: 1036891562 ms; timestamp adjusted to: 0 ms.
13:00:00:00.162 EMC: New Day 13
13:00:00:00.768 EMC: Resynchronizing to Flare time: 1123290156 ms; timestamp adjusted to: 0 ms.
14:00:00:00.139 EMC: New Day 14
14:00:00:02.176 EMC: Resynchronizing to Flare time: 1209692000 ms; timestamp adjusted to: 0 ms.
15:00:00:00.135 EMC: New Day 15
15:00:00:01.307 EMC: Resynchronizing to Flare time: 1296090593 ms; timestamp adjusted to: 0 ms.
16:00:00:00.468 EMC: New Day 16
16:00:00:00.972 EMC: Resynchronizing to Flare time: 1382489187 ms; timestamp adjusted to: 0 ms.
17:00:00:00.047 EMC: New Day 17
17:00:00:03.016 EMC: Resynchronizing to Flare time: 1468891062 ms; timestamp adjusted to: 0 ms.
18:00:00:00.102 EMC: New Day 18
18:00:00:00.867 EMC: Resynchronizing to Flare time: 1555289656 ms; timestamp adjusted to: 0 ms.
19:00:00:00.363 EMC: New Day 19
19:00:00:01.875 EMC: Resynchronizing to Flare time: 1641691562 ms; timestamp adjusted to: 0 ms.
20:00:00:00.319 EMC: New Day 20
20:00:00:00.426 EMC: Resynchronizing to Flare time: 1728090125 ms; timestamp adjusted to: 0 ms.
21:00:00:00.145 EMC: New Day 21
21:00:00:02.836 EMC: Resynchronizing to Flare time: 1814492000 ms; timestamp adjusted to: 0 ms.
22:00:00:00.310 EMC: New Day 22
22:00:00:02.312 EMC: Resynchronizing to Flare time: 1900890593 ms; timestamp adjusted to: 0 ms.
23:00:00:00.051 EMC: New Day 23
23:00:00:00.913 EMC: Resynchronizing to Flare time: 1987289187 ms; timestamp adjusted to: 0 ms.
24:00:00:00.184 EMC: New Day 24
24:00:00:02.210 EMC: Resynchronizing to Flare time: 2073691093 ms; timestamp adjusted to: 0 ms.
25:00:00:00.221 EMC: New Day 25
25:00:00:03.477 EMC: Resynchronizing to Flare time: 2160092937 ms; timestamp adjusted to: 0 ms.
26:00:00:00.010 EMC: New Day 26
26:00:00:02.472 EMC: Resynchronizing to Flare time: 2246491562 ms; timestamp adjusted to: 0 ms.
27:00:00:00.030 EMC: New Day 27
27:00:00:01.336 EMC: Resynchronizing to Flare time: 2332890125 ms; timestamp adjusted to: 0 ms.
27:05:24:47.985 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
27:05:24:47.994 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
27:05:24:48.001 Setting CPLD activity LED mode to OR because both sides not being polled.
27:05:24:48.012 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
27:05:24:48.048 EMC: DISPLAY command success, encl number=01, mode=C.
27:05:24:48.157 EMC: Sending changed local info to peer.
27:05:24:52.602 EMC: Flare polling state restored because good generation number 0x7e00 received.
27:05:24:52.610 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
27:05:24:52.617 Setting CPLD activity LED mode to AND because both sides being polled.
27:05:24:52.626 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
27:05:24:52.648 EMC: DISPLAY command success, encl number=01, mode=4.
27:05:24:52.671 EMC: Resynchronizing to Flare time: 2352309015 ms; timestamp adjusted to: 0 ms.
27:05:25:09.241 EMC: Sending changed local info to peer.
27:23:33:13.787 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
27:23:33:13.796 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
27:23:33:13.804 Setting CPLD activity LED mode to OR because both sides not being polled.
27:23:33:13.815 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
27:23:33:13.848 EMC: DISPLAY command success, encl number=01, mode=C.
27:23:33:13.958 EMC: Sending changed local info to peer.
27:23:33:18.448 EMC: Flare polling state restored because good generation number 0x7e00 received.
27:23:33:18.456 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
27:23:33:18.464 Setting CPLD activity LED mode to AND because both sides being polled.
27:23:33:18.471 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
27:23:33:18.515 EMC: DISPLAY command success, encl number=01, mode=4.
27:23:33:18.557 EMC: Resynchronizing to Flare time: 2417664937 ms; timestamp adjusted to: 0 ms.
27:23:34:25.646 EMC: Sending changed local info to peer.
28:00:00:00.144 EMC: New Day 28
28:00:00:01.376 EMC: Resynchronizing to Flare time: 2419206687 ms; timestamp adjusted to: 0 ms.
29:00:00:00.097 EMC: New Day 29
29:00:00:01.651 EMC: Resynchronizing to Flare time: 2505690625 ms; timestamp adjusted to: 0 ms.
29:06:38:57.010 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
29:06:38:57.016 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
29:06:38:57.026 Setting CPLD activity LED mode to OR because both sides not being polled.
29:06:38:57.035 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
29:06:38:57.057 EMC: DISPLAY command success, encl number=01, mode=C.
29:06:38:57.104 EMC: Sending changed local info to peer.
29:06:39:00.287 EMC: Flare polling state restored because good generation number 0x7e00 received.
29:06:39:00.295 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
29:06:39:00.302 Setting CPLD activity LED mode to AND because both sides being polled.
29:06:39:00.310 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
29:06:39:00.333 EMC: DISPLAY command success, encl number=01, mode=4.
29:06:39:00.358 EMC: Resynchronizing to Flare time: 2529564968 ms; timestamp adjusted to: 0 ms.
29:06:39:25.213 EMC: Sending changed local info to peer.
30:00:00:00.613 EMC: New Day 30
30:00:00:01.509 EMC: Resynchronizing to Flare time: 2592066218 ms; timestamp adjusted to: 0 ms.
30:15:20:22.441 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
30:15:20:22.447 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
30:15:20:22.456 Setting CPLD activity LED mode to OR because both sides not being polled.
30:15:20:22.465 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
30:15:20:22.488 EMC: DISPLAY command success, encl number=01, mode=C.
30:15:20:22.530 EMC: Sending changed local info to peer.
30:15:20:25.718 EMC: Flare polling state restored because good generation number 0x7e00 received.
30:15:20:25.726 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
30:15:20:25.734 Setting CPLD activity LED mode to AND because both sides being polled.
30:15:20:25.741 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
30:15:20:25.780 EMC: DISPLAY command success, encl number=01, mode=4.
30:15:20:25.800 EMC: Sending changed local info to peer.
30:15:20:25.815 EMC: Resynchronizing to Flare time: 2647283093 ms; timestamp adjusted to: 0 ms.
30:15:21:24.327 EMC: ...read processing took 0 ms, status=Success
30:15:21:24.977 EMC: ...write took 645 ms, status=Success
31:00:00:00.497 EMC: New Day 31
31:00:00:02.938 EMC: Resynchronizing to Flare time: 2678435281 ms; timestamp adjusted to: 0 ms.
32:00:00:00.010 EMC: New Day 32
32:00:00:00.770 EMC: Year 2012, Month 6
32:00:00:00.792 EMC: Resynchronizing to Flare time: 86489656 ms; timestamp adjusted to: 0 ms.
02:00:00:00.003 EMC: New Day 2
02:00:00:03.245 EMC: Resynchronizing to Flare time: 172891531 ms; timestamp adjusted to: 0 ms.
02:08:09:39.732 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
02:08:09:39.755 EMC: DISPLAY command success, encl number=01, mode=4.
02:08:09:40.054 Setting CPLD activity LED mode to OR because both sides not being polled.
02:08:09:42.992 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
02:08:09:43.004 EMC: DISPLAY command success, encl number=01, mode=4.
02:08:09:43.314 Setting CPLD activity LED mode to AND because both sides being polled.
03:00:00:00.421 EMC: New Day 3
03:00:00:02.177 EMC: Resynchronizing to Flare time: 259290125 ms; timestamp adjusted to: 0 ms.
03:10:33:58.967 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
03:10:33:58.991 EMC: DISPLAY command success, encl number=01, mode=4.
03:10:33:59.300 Setting CPLD activity LED mode to OR because both sides not being polled.
03:10:34:01.896 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
03:10:34:01.918 EMC: DISPLAY command success, encl number=01, mode=4.
03:10:34:02.224 Setting CPLD activity LED mode to AND because both sides being polled.
04:00:00:00.004 EMC: New Day 4
04:00:00:03.217 EMC: Resynchronizing to Flare time: 345692000 ms; timestamp adjusted to: 0 ms.
                                                                                                                                                                 

Buffer Type: SXP Trace
Buffer Id: 0
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 49th at 17:03:03.
00:00:00:01:265 EMC: Setting Update lock: 1
00:00:00:01:399 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:420 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:440 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:460 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:482 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:502 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:507 EMC: Failed to get Power Supply revision info.
00:00:00:01:514 EMC: SXP FW Version:   04.05
00:00:00:01:518 EMC: SXP BOOT Version: 03.00
00:00:00:01:522 EMC: SXP ISTR Version: 03.05
00:00:00:01:526 EMC: MC Version:       16.01
00:00:00:01:531 EMC: DLMC Version:     14.47
00:00:00:01:535 EMC: PS Version:       00.01
00:00:00:01:539 EMC: CPLD Version:     00.09
00:00:00:01:543 EMC: Base SAS Address: 50060480_00b680c0
00:00:00:01:548 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:557 EMC: Exception flag read from register is 0
00:00:00:00:985 EMC: Setting enclosure number to 255
00:00:00:01:005 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:01:026 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:049 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:069 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:090 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:112 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:119 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:142 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:165 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:185 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:239 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:259 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:265 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:287 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:308 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:330 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:350 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:370 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:375 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:383 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:01:389 EMC: Checking for updated FW!
00:00:00:01:393 EMC: Checking for SXP FW download
00:00:00:01:420 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:01:435 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:01:440 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:15:669 WDG EXPIRED: Elapsed time since last WDG run: 799 ms
00:00:00:15:674 WDG: Pong not received from: EMA
                                              

Buffer Type: SXP Trace
Buffer Id: 1
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 946
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:15.7
00:00:00:01:264 EMC: Setting Update lock: 1
00:00:00:01:350 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:384 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:404 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:424 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:445 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:467 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:472 EMC: Failed to get Power Supply revision info.
00:00:00:01:478 EMC: SXP FW Version:   04.05
00:00:00:01:483 EMC: SXP BOOT Version: 03.00
00:00:00:01:487 EMC: SXP ISTR Version: 03.05
00:00:00:01:491 EMC: MC Version:       16.01
00:00:00:01:497 EMC: DLMC Version:     14.47
00:00:00:01:501 EMC: PS Version:       00.01
00:00:00:01:505 EMC: CPLD Version:     00.13
00:00:00:15:768 WDG EXPIRED: Elapsed time since last WDG run: 229 ms
00:00:00:15:773 WDG: Pong not received from: EMA
                 

Buffer Type: SXP Trace
Buffer Id: 2
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:51.
00:00:00:01:263 EMC: Setting Update lock: 1
00:00:00:01:349 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:382 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:402 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:423 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:443 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:465 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:470 EMC: Failed to get Power Supply revision info.
00:00:00:01:476 EMC: SXP FW Version:   04.05
00:00:00:01:481 EMC: SXP BOOT Version: 03.00
00:00:00:01:485 EMC: SXP ISTR Version: 03.05
00:00:00:01:489 EMC: MC Version:       16.01
00:00:00:01:493 EMC: DLMC Version:     14.47
00:00:00:01:498 EMC: PS Version:       00.01
00:00:00:01:502 EMC: CPLD Version:     00.13
00:00:00:01:506 EMC: Base SAS Address: 50060480_00fa80c0
00:00:00:01:510 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:520 EMC: Exception flag read from register is 1
00:00:00:36:984 EMC: Setting enclosure number to 255
00:00:00:37:003 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:37:046 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:068 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:089 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:109 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:130 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:136 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:160 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:183 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:204 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:225 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:269 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:274 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:298 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:321 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:342 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:363 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:385 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:390 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:397 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:37:404 EMC: Checking for updated FW!
00:00:00:37:408 EMC: Checking for SXP FW download
00:00:00:37:436 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:37:451 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:37:456 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:51:683 WDG EXPIRED: Elapsed time since last WDG run: 792 ms
00:00:00:51:688 WDG: Pong not received from: EMA
                                              

Buffer Type: Expander Ring Buffer Trace
Buffer Id: 255
Source: Manual
SXP Major Rev: 04
SXP Minor Rev: 30
Length: -1
Timestamp: 06/04/2012 14:19:06
        
02:00:00:00.051 EMC: New Day 2
02:00:00:02.866 EMC: Resynchronizing to Flare time: 172892468 ms; timestamp adjusted to: 0 ms.
03:00:00:00.020 EMC: New Day 3
03:00:00:01.683 EMC: Resynchronizing to Flare time: 259291093 ms; timestamp adjusted to: 0 ms.
04:00:00:00.171 EMC: New Day 4
04:00:00:00.734 EMC: Resynchronizing to Flare time: 345689656 ms; timestamp adjusted to: 0 ms.
05:00:00:00.278 EMC: New Day 5
05:00:00:03.374 EMC: Resynchronizing to Flare time: 432091531 ms; timestamp adjusted to: 0 ms.
06:00:00:00.223 EMC: New Day 6
06:00:00:01.936 EMC: Resynchronizing to Flare time: 518490125 ms; timestamp adjusted to: 0 ms.
07:00:00:00.247 EMC: New Day 7
07:00:00:02.828 EMC: Resynchronizing to Flare time: 604892000 ms; timestamp adjusted to: 0 ms.
08:00:00:00.097 EMC: New Day 8
08:00:00:01.022 EMC: Resynchronizing to Flare time: 691290625 ms; timestamp adjusted to: 0 ms.
09:00:00:00.120 EMC: New Day 9
09:00:00:03.369 EMC: Resynchronizing to Flare time: 777692484 ms; timestamp adjusted to: 0 ms.
10:00:00:00.052 EMC: New Day 10
10:00:00:02.602 EMC: Resynchronizing to Flare time: 864091062 ms; timestamp adjusted to: 0 ms.
11:00:00:00.202 EMC: New Day 11
11:00:00:01.493 EMC: Resynchronizing to Flare time: 950489656 ms; timestamp adjusted to: 0 ms.
12:00:00:00.112 EMC: New Day 12
12:00:00:03.372 EMC: Resynchronizing to Flare time: 1036891562 ms; timestamp adjusted to: 0 ms.
13:00:00:00.162 EMC: New Day 13
13:00:00:00.768 EMC: Resynchronizing to Flare time: 1123290156 ms; timestamp adjusted to: 0 ms.
14:00:00:00.139 EMC: New Day 14
14:00:00:02.176 EMC: Resynchronizing to Flare time: 1209692000 ms; timestamp adjusted to: 0 ms.
15:00:00:00.135 EMC: New Day 15
15:00:00:01.307 EMC: Resynchronizing to Flare time: 1296090593 ms; timestamp adjusted to: 0 ms.
16:00:00:00.468 EMC: New Day 16
16:00:00:00.972 EMC: Resynchronizing to Flare time: 1382489187 ms; timestamp adjusted to: 0 ms.
17:00:00:00.047 EMC: New Day 17
17:00:00:03.016 EMC: Resynchronizing to Flare time: 1468891062 ms; timestamp adjusted to: 0 ms.
18:00:00:00.102 EMC: New Day 18
18:00:00:00.867 EMC: Resynchronizing to Flare time: 1555289656 ms; timestamp adjusted to: 0 ms.
19:00:00:00.363 EMC: New Day 19
19:00:00:01.875 EMC: Resynchronizing to Flare time: 1641691562 ms; timestamp adjusted to: 0 ms.
20:00:00:00.319 EMC: New Day 20
20:00:00:00.426 EMC: Resynchronizing to Flare time: 1728090125 ms; timestamp adjusted to: 0 ms.
21:00:00:00.145 EMC: New Day 21
21:00:00:02.836 EMC: Resynchronizing to Flare time: 1814492000 ms; timestamp adjusted to: 0 ms.
22:00:00:00.310 EMC: New Day 22
22:00:00:02.312 EMC: Resynchronizing to Flare time: 1900890593 ms; timestamp adjusted to: 0 ms.
23:00:00:00.051 EMC: New Day 23
23:00:00:00.913 EMC: Resynchronizing to Flare time: 1987289187 ms; timestamp adjusted to: 0 ms.
24:00:00:00.184 EMC: New Day 24
24:00:00:02.210 EMC: Resynchronizing to Flare time: 2073691093 ms; timestamp adjusted to: 0 ms.
25:00:00:00.221 EMC: New Day 25
25:00:00:03.477 EMC: Resynchronizing to Flare time: 2160092937 ms; timestamp adjusted to: 0 ms.
26:00:00:00.010 EMC: New Day 26
26:00:00:02.472 EMC: Resynchronizing to Flare time: 2246491562 ms; timestamp adjusted to: 0 ms.
27:00:00:00.030 EMC: New Day 27
27:00:00:01.336 EMC: Resynchronizing to Flare time: 2332890125 ms; timestamp adjusted to: 0 ms.
27:05:24:47.985 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
27:05:24:47.994 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
27:05:24:48.001 Setting CPLD activity LED mode to OR because both sides not being polled.
27:05:24:48.012 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
27:05:24:48.048 EMC: DISPLAY command success, encl number=01, mode=C.
27:05:24:48.157 EMC: Sending changed local info to peer.
27:05:24:52.602 EMC: Flare polling state restored because good generation number 0x7e00 received.
27:05:24:52.610 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
27:05:24:52.617 Setting CPLD activity LED mode to AND because both sides being polled.
27:05:24:52.626 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
27:05:24:52.648 EMC: DISPLAY command success, encl number=01, mode=4.
27:05:24:52.671 EMC: Resynchronizing to Flare time: 2352309015 ms; timestamp adjusted to: 0 ms.
27:05:25:09.241 EMC: Sending changed local info to peer.
27:23:33:13.787 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
27:23:33:13.796 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
27:23:33:13.804 Setting CPLD activity LED mode to OR because both sides not being polled.
27:23:33:13.815 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
27:23:33:13.848 EMC: DISPLAY command success, encl number=01, mode=C.
27:23:33:13.958 EMC: Sending changed local info to peer.
27:23:33:18.448 EMC: Flare polling state restored because good generation number 0x7e00 received.
27:23:33:18.456 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
27:23:33:18.464 Setting CPLD activity LED mode to AND because both sides being polled.
27:23:33:18.471 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
27:23:33:18.515 EMC: DISPLAY command success, encl number=01, mode=4.
27:23:33:18.557 EMC: Resynchronizing to Flare time: 2417664937 ms; timestamp adjusted to: 0 ms.
27:23:34:25.646 EMC: Sending changed local info to peer.
28:00:00:00.144 EMC: New Day 28
28:00:00:01.376 EMC: Resynchronizing to Flare time: 2419206687 ms; timestamp adjusted to: 0 ms.
29:00:00:00.097 EMC: New Day 29
29:00:00:01.651 EMC: Resynchronizing to Flare time: 2505690625 ms; timestamp adjusted to: 0 ms.
29:06:38:57.010 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
29:06:38:57.016 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
29:06:38:57.026 Setting CPLD activity LED mode to OR because both sides not being polled.
29:06:38:57.035 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
29:06:38:57.057 EMC: DISPLAY command success, encl number=01, mode=C.
29:06:38:57.104 EMC: Sending changed local info to peer.
29:06:39:00.287 EMC: Flare polling state restored because good generation number 0x7e00 received.
29:06:39:00.295 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
29:06:39:00.302 Setting CPLD activity LED mode to AND because both sides being polled.
29:06:39:00.310 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
29:06:39:00.333 EMC: DISPLAY command success, encl number=01, mode=4.
29:06:39:00.358 EMC: Resynchronizing to Flare time: 2529564968 ms; timestamp adjusted to: 0 ms.
29:06:39:25.213 EMC: Sending changed local info to peer.
30:00:00:00.613 EMC: New Day 30
30:00:00:01.509 EMC: Resynchronizing to Flare time: 2592066218 ms; timestamp adjusted to: 0 ms.
30:15:20:22.441 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
30:15:20:22.447 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
30:15:20:22.456 Setting CPLD activity LED mode to OR because both sides not being polled.
30:15:20:22.465 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
30:15:20:22.488 EMC: DISPLAY command success, encl number=01, mode=C.
30:15:20:22.530 EMC: Sending changed local info to peer.
30:15:20:25.718 EMC: Flare polling state restored because good generation number 0x7e00 received.
30:15:20:25.726 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
30:15:20:25.734 Setting CPLD activity LED mode to AND because both sides being polled.
30:15:20:25.741 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
30:15:20:25.780 EMC: DISPLAY command success, encl number=01, mode=4.
30:15:20:25.800 EMC: Sending changed local info to peer.
30:15:20:25.815 EMC: Resynchronizing to Flare time: 2647283093 ms; timestamp adjusted to: 0 ms.
30:15:21:24.327 EMC: ...read processing took 0 ms, status=Success
30:15:21:24.977 EMC: ...write took 645 ms, status=Success
31:00:00:00.497 EMC: New Day 31
31:00:00:02.938 EMC: Resynchronizing to Flare time: 2678435281 ms; timestamp adjusted to: 0 ms.
32:00:00:00.010 EMC: New Day 32
32:00:00:00.770 EMC: Year 2012, Month 6
32:00:00:00.792 EMC: Resynchronizing to Flare time: 86489656 ms; timestamp adjusted to: 0 ms.
02:00:00:00.003 EMC: New Day 2
02:00:00:03.245 EMC: Resynchronizing to Flare time: 172891531 ms; timestamp adjusted to: 0 ms.
02:08:09:39.732 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
02:08:09:39.755 EMC: DISPLAY command success, encl number=01, mode=4.
02:08:09:40.054 Setting CPLD activity LED mode to OR because both sides not being polled.
02:08:09:42.992 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
02:08:09:43.004 EMC: DISPLAY command success, encl number=01, mode=4.
02:08:09:43.314 Setting CPLD activity LED mode to AND because both sides being polled.
03:00:00:00.421 EMC: New Day 3
03:00:00:02.177 EMC: Resynchronizing to Flare time: 259290125 ms; timestamp adjusted to: 0 ms.
03:10:33:58.967 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
03:10:33:58.991 EMC: DISPLAY command success, encl number=01, mode=4.
03:10:33:59.300 Setting CPLD activity LED mode to OR because both sides not being polled.
03:10:34:01.896 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
03:10:34:01.918 EMC: DISPLAY command success, encl number=01, mode=4.
03:10:34:02.224 Setting CPLD activity LED mode to AND because both sides being polled.
04:00:00:00.004 EMC: New Day 4
04:00:00:03.217 EMC: Resynchronizing to Flare time: 345692000 ms; timestamp adjusted to: 0 ms.
04:13:39:33.355 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
04:13:39:33.364 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
04:13:39:33.372 Setting CPLD activity LED mode to OR because both sides not being polled.
04:13:39:33.382 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
04:13:39:33.417 EMC: DISPLAY command success, encl number=01, mode=C.
04:13:39:33.530 EMC: Sending changed local info to peer.
04:13:39:37.535 EMC: Flare polling state restored because good generation number 0x7e00 received.
04:13:39:37.544 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
04:13:39:37.551 Setting CPLD activity LED mode to AND because both sides being polled.
04:13:39:37.559 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
04:13:39:37.584 EMC: DISPLAY command success, encl number=01, mode=4.
04:13:39:37.606 EMC: Resynchronizing to Flare time: 394824828 ms; timestamp adjusted to: 0 ms.
04:13:40:25.076 EMC: Sending changed local info to peer.
04:13:40:30.256 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
04:13:40:30.265 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
04:13:40:30.272 Setting CPLD activity LED mode to OR because both sides not being polled.
04:13:40:30.284 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
04:13:40:30.306 EMC: DISPLAY command success, encl number=01, mode=C.
04:13:40:30.408 EMC: Sending changed local info to peer.
04:13:40:32.500 EMC: Flare polling state restored because good generation number 0x7e00 received.
04:13:40:32.508 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
04:13:40:32.517 Setting CPLD activity LED mode to AND because both sides being polled.
04:13:40:32.519 EMC: Sending changed local info to peer.
04:13:40:32.523 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
04:13:40:32.571 EMC: DISPLAY command success, encl number=01, mode=4.
                                                                                                                                                                 

Buffer Type: SXP Trace
Buffer Id: 0
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 49th at 17:03:03.
00:00:00:01:265 EMC: Setting Update lock: 1
00:00:00:01:399 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:420 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:440 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:460 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:482 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:502 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:507 EMC: Failed to get Power Supply revision info.
00:00:00:01:514 EMC: SXP FW Version:   04.05
00:00:00:01:518 EMC: SXP BOOT Version: 03.00
00:00:00:01:522 EMC: SXP ISTR Version: 03.05
00:00:00:01:526 EMC: MC Version:       16.01
00:00:00:01:531 EMC: DLMC Version:     14.47
00:00:00:01:535 EMC: PS Version:       00.01
00:00:00:01:539 EMC: CPLD Version:     00.09
00:00:00:01:543 EMC: Base SAS Address: 50060480_00b680c0
00:00:00:01:548 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:557 EMC: Exception flag read from register is 0
00:00:00:00:985 EMC: Setting enclosure number to 255
00:00:00:01:005 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:01:026 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:049 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:069 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:090 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:112 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:119 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:142 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:165 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:185 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:239 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:259 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:265 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:287 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:308 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:330 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:350 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:370 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:375 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:383 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:01:389 EMC: Checking for updated FW!
00:00:00:01:393 EMC: Checking for SXP FW download
00:00:00:01:420 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:01:435 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:01:440 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:15:669 WDG EXPIRED: Elapsed time since last WDG run: 799 ms
00:00:00:15:674 WDG: Pong not received from: EMA
                                              

Buffer Type: SXP Trace
Buffer Id: 1
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 946
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:15.7
00:00:00:01:264 EMC: Setting Update lock: 1
00:00:00:01:350 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:384 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:404 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:424 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:445 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:467 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:472 EMC: Failed to get Power Supply revision info.
00:00:00:01:478 EMC: SXP FW Version:   04.05
00:00:00:01:483 EMC: SXP BOOT Version: 03.00
00:00:00:01:487 EMC: SXP ISTR Version: 03.05
00:00:00:01:491 EMC: MC Version:       16.01
00:00:00:01:497 EMC: DLMC Version:     14.47
00:00:00:01:501 EMC: PS Version:       00.01
00:00:00:01:505 EMC: CPLD Version:     00.13
00:00:00:15:768 WDG EXPIRED: Elapsed time since last WDG run: 229 ms
00:00:00:15:773 WDG: Pong not received from: EMA
                 

Buffer Type: SXP Trace
Buffer Id: 2
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:51.
00:00:00:01:263 EMC: Setting Update lock: 1
00:00:00:01:349 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:382 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:402 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:423 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:443 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:465 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:470 EMC: Failed to get Power Supply revision info.
00:00:00:01:476 EMC: SXP FW Version:   04.05
00:00:00:01:481 EMC: SXP BOOT Version: 03.00
00:00:00:01:485 EMC: SXP ISTR Version: 03.05
00:00:00:01:489 EMC: MC Version:       16.01
00:00:00:01:493 EMC: DLMC Version:     14.47
00:00:00:01:498 EMC: PS Version:       00.01
00:00:00:01:502 EMC: CPLD Version:     00.13
00:00:00:01:506 EMC: Base SAS Address: 50060480_00fa80c0
00:00:00:01:510 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:520 EMC: Exception flag read from register is 1
00:00:00:36:984 EMC: Setting enclosure number to 255
00:00:00:37:003 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:37:046 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:068 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:089 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:109 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:130 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:136 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:160 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:183 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:204 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:225 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:269 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:274 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:298 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:321 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:342 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:363 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:385 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:390 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:397 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:37:404 EMC: Checking for updated FW!
00:00:00:37:408 EMC: Checking for SXP FW download
00:00:00:37:436 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:37:451 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:37:456 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:51:683 WDG EXPIRED: Elapsed time since last WDG run: 792 ms
00:00:00:51:688 WDG: Pong not received from: EMA
                                              

Buffer Type: Expander Ring Buffer Trace
Buffer Id: 255
Source: Manual
SXP Major Rev: 04
SXP Minor Rev: 30
Length: -1
Timestamp: 06/07/2012 08:35:18
        
11:00:00:01.493 EMC: Resynchronizing to Flare time: 950489656 ms; timestamp adjusted to: 0 ms.
12:00:00:00.112 EMC: New Day 12
12:00:00:03.372 EMC: Resynchronizing to Flare time: 1036891562 ms; timestamp adjusted to: 0 ms.
13:00:00:00.162 EMC: New Day 13
13:00:00:00.768 EMC: Resynchronizing to Flare time: 1123290156 ms; timestamp adjusted to: 0 ms.
14:00:00:00.139 EMC: New Day 14
14:00:00:02.176 EMC: Resynchronizing to Flare time: 1209692000 ms; timestamp adjusted to: 0 ms.
15:00:00:00.135 EMC: New Day 15
15:00:00:01.307 EMC: Resynchronizing to Flare time: 1296090593 ms; timestamp adjusted to: 0 ms.
16:00:00:00.468 EMC: New Day 16
16:00:00:00.972 EMC: Resynchronizing to Flare time: 1382489187 ms; timestamp adjusted to: 0 ms.
17:00:00:00.047 EMC: New Day 17
17:00:00:03.016 EMC: Resynchronizing to Flare time: 1468891062 ms; timestamp adjusted to: 0 ms.
18:00:00:00.102 EMC: New Day 18
18:00:00:00.867 EMC: Resynchronizing to Flare time: 1555289656 ms; timestamp adjusted to: 0 ms.
19:00:00:00.363 EMC: New Day 19
19:00:00:01.875 EMC: Resynchronizing to Flare time: 1641691562 ms; timestamp adjusted to: 0 ms.
20:00:00:00.319 EMC: New Day 20
20:00:00:00.426 EMC: Resynchronizing to Flare time: 1728090125 ms; timestamp adjusted to: 0 ms.
21:00:00:00.145 EMC: New Day 21
21:00:00:02.836 EMC: Resynchronizing to Flare time: 1814492000 ms; timestamp adjusted to: 0 ms.
22:00:00:00.310 EMC: New Day 22
22:00:00:02.312 EMC: Resynchronizing to Flare time: 1900890593 ms; timestamp adjusted to: 0 ms.
23:00:00:00.051 EMC: New Day 23
23:00:00:00.913 EMC: Resynchronizing to Flare time: 1987289187 ms; timestamp adjusted to: 0 ms.
24:00:00:00.184 EMC: New Day 24
24:00:00:02.210 EMC: Resynchronizing to Flare time: 2073691093 ms; timestamp adjusted to: 0 ms.
25:00:00:00.221 EMC: New Day 25
25:00:00:03.477 EMC: Resynchronizing to Flare time: 2160092937 ms; timestamp adjusted to: 0 ms.
26:00:00:00.010 EMC: New Day 26
26:00:00:02.472 EMC: Resynchronizing to Flare time: 2246491562 ms; timestamp adjusted to: 0 ms.
27:00:00:00.030 EMC: New Day 27
27:00:00:01.336 EMC: Resynchronizing to Flare time: 2332890125 ms; timestamp adjusted to: 0 ms.
27:05:24:47.985 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
27:05:24:47.994 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
27:05:24:48.001 Setting CPLD activity LED mode to OR because both sides not being polled.
27:05:24:48.012 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
27:05:24:48.048 EMC: DISPLAY command success, encl number=01, mode=C.
27:05:24:48.157 EMC: Sending changed local info to peer.
27:05:24:52.602 EMC: Flare polling state restored because good generation number 0x7e00 received.
27:05:24:52.610 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
27:05:24:52.617 Setting CPLD activity LED mode to AND because both sides being polled.
27:05:24:52.626 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
27:05:24:52.648 EMC: DISPLAY command success, encl number=01, mode=4.
27:05:24:52.671 EMC: Resynchronizing to Flare time: 2352309015 ms; timestamp adjusted to: 0 ms.
27:05:25:09.241 EMC: Sending changed local info to peer.
27:23:33:13.787 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
27:23:33:13.796 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
27:23:33:13.804 Setting CPLD activity LED mode to OR because both sides not being polled.
27:23:33:13.815 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
27:23:33:13.848 EMC: DISPLAY command success, encl number=01, mode=C.
27:23:33:13.958 EMC: Sending changed local info to peer.
27:23:33:18.448 EMC: Flare polling state restored because good generation number 0x7e00 received.
27:23:33:18.456 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
27:23:33:18.464 Setting CPLD activity LED mode to AND because both sides being polled.
27:23:33:18.471 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
27:23:33:18.515 EMC: DISPLAY command success, encl number=01, mode=4.
27:23:33:18.557 EMC: Resynchronizing to Flare time: 2417664937 ms; timestamp adjusted to: 0 ms.
27:23:34:25.646 EMC: Sending changed local info to peer.
28:00:00:00.144 EMC: New Day 28
28:00:00:01.376 EMC: Resynchronizing to Flare time: 2419206687 ms; timestamp adjusted to: 0 ms.
29:00:00:00.097 EMC: New Day 29
29:00:00:01.651 EMC: Resynchronizing to Flare time: 2505690625 ms; timestamp adjusted to: 0 ms.
29:06:38:57.010 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
29:06:38:57.016 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
29:06:38:57.026 Setting CPLD activity LED mode to OR because both sides not being polled.
29:06:38:57.035 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
29:06:38:57.057 EMC: DISPLAY command success, encl number=01, mode=C.
29:06:38:57.104 EMC: Sending changed local info to peer.
29:06:39:00.287 EMC: Flare polling state restored because good generation number 0x7e00 received.
29:06:39:00.295 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
29:06:39:00.302 Setting CPLD activity LED mode to AND because both sides being polled.
29:06:39:00.310 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
29:06:39:00.333 EMC: DISPLAY command success, encl number=01, mode=4.
29:06:39:00.358 EMC: Resynchronizing to Flare time: 2529564968 ms; timestamp adjusted to: 0 ms.
29:06:39:25.213 EMC: Sending changed local info to peer.
30:00:00:00.613 EMC: New Day 30
30:00:00:01.509 EMC: Resynchronizing to Flare time: 2592066218 ms; timestamp adjusted to: 0 ms.
30:15:20:22.441 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
30:15:20:22.447 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
30:15:20:22.456 Setting CPLD activity LED mode to OR because both sides not being polled.
30:15:20:22.465 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
30:15:20:22.488 EMC: DISPLAY command success, encl number=01, mode=C.
30:15:20:22.530 EMC: Sending changed local info to peer.
30:15:20:25.718 EMC: Flare polling state restored because good generation number 0x7e00 received.
30:15:20:25.726 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
30:15:20:25.734 Setting CPLD activity LED mode to AND because both sides being polled.
30:15:20:25.741 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
30:15:20:25.780 EMC: DISPLAY command success, encl number=01, mode=4.
30:15:20:25.800 EMC: Sending changed local info to peer.
30:15:20:25.815 EMC: Resynchronizing to Flare time: 2647283093 ms; timestamp adjusted to: 0 ms.
30:15:21:24.327 EMC: ...read processing took 0 ms, status=Success
30:15:21:24.977 EMC: ...write took 645 ms, status=Success
31:00:00:00.497 EMC: New Day 31
31:00:00:02.938 EMC: Resynchronizing to Flare time: 2678435281 ms; timestamp adjusted to: 0 ms.
32:00:00:00.010 EMC: New Day 32
32:00:00:00.770 EMC: Year 2012, Month 6
32:00:00:00.792 EMC: Resynchronizing to Flare time: 86489656 ms; timestamp adjusted to: 0 ms.
02:00:00:00.003 EMC: New Day 2
02:00:00:03.245 EMC: Resynchronizing to Flare time: 172891531 ms; timestamp adjusted to: 0 ms.
02:08:09:39.732 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
02:08:09:39.755 EMC: DISPLAY command success, encl number=01, mode=4.
02:08:09:40.054 Setting CPLD activity LED mode to OR because both sides not being polled.
02:08:09:42.992 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
02:08:09:43.004 EMC: DISPLAY command success, encl number=01, mode=4.
02:08:09:43.314 Setting CPLD activity LED mode to AND because both sides being polled.
03:00:00:00.421 EMC: New Day 3
03:00:00:02.177 EMC: Resynchronizing to Flare time: 259290125 ms; timestamp adjusted to: 0 ms.
03:10:33:58.967 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
03:10:33:58.991 EMC: DISPLAY command success, encl number=01, mode=4.
03:10:33:59.300 Setting CPLD activity LED mode to OR because both sides not being polled.
03:10:34:01.896 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
03:10:34:01.918 EMC: DISPLAY command success, encl number=01, mode=4.
03:10:34:02.224 Setting CPLD activity LED mode to AND because both sides being polled.
04:00:00:00.004 EMC: New Day 4
04:00:00:03.217 EMC: Resynchronizing to Flare time: 345692000 ms; timestamp adjusted to: 0 ms.
04:13:39:33.355 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
04:13:39:33.364 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
04:13:39:33.372 Setting CPLD activity LED mode to OR because both sides not being polled.
04:13:39:33.382 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
04:13:39:33.417 EMC: DISPLAY command success, encl number=01, mode=C.
04:13:39:33.530 EMC: Sending changed local info to peer.
04:13:39:37.535 EMC: Flare polling state restored because good generation number 0x7e00 received.
04:13:39:37.544 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
04:13:39:37.551 Setting CPLD activity LED mode to AND because both sides being polled.
04:13:39:37.559 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
04:13:39:37.584 EMC: DISPLAY command success, encl number=01, mode=4.
04:13:39:37.606 EMC: Resynchronizing to Flare time: 394824828 ms; timestamp adjusted to: 0 ms.
04:13:40:25.076 EMC: Sending changed local info to peer.
04:13:40:30.256 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
04:13:40:30.265 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
04:13:40:30.272 Setting CPLD activity LED mode to OR because both sides not being polled.
04:13:40:30.284 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
04:13:40:30.306 EMC: DISPLAY command success, encl number=01, mode=C.
04:13:40:30.408 EMC: Sending changed local info to peer.
04:13:40:32.500 EMC: Flare polling state restored because good generation number 0x7e00 received.
04:13:40:32.508 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
04:13:40:32.517 Setting CPLD activity LED mode to AND because both sides being polled.
04:13:40:32.519 EMC: Sending changed local info to peer.
04:13:40:32.523 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
04:13:40:32.571 EMC: DISPLAY command success, encl number=01, mode=4.
05:00:00:00.017 EMC: New Day 5
05:00:00:02.674 EMC: Resynchronizing to Flare time: 432041375 ms; timestamp adjusted to: 0 ms.
06:00:00:00.250 EMC: New Day 6
06:00:00:02.927 EMC: Resynchronizing to Flare time: 518492500 ms; timestamp adjusted to: 0 ms.
06:04:56:16.508 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
06:04:56:16.515 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
06:04:56:16.522 Setting CPLD activity LED mode to OR because both sides not being polled.
06:04:56:16.531 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:04:56:16.554 EMC: DISPLAY command success, encl number=01, mode=C.
06:04:56:16.599 EMC: Sending changed local info to peer.
06:04:56:19.785 EMC: Flare polling state restored because good generation number 0x7e00 received.
06:04:56:19.793 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
06:04:56:19.802 Setting CPLD activity LED mode to AND because both sides being polled.
06:04:56:19.809 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:04:56:19.836 EMC: DISPLAY command success, encl number=01, mode=4.
06:04:56:19.858 EMC: Resynchronizing to Flare time: 536198093 ms; timestamp adjusted to: 0 ms.
06:04:56:38.376 EMC: Sending changed local info to peer.
07:00:00:00.021 EMC: New Day 7
07:00:00:00.800 EMC: Resynchronizing to Flare time: 604871375 ms; timestamp adjusted to: 0 ms.
                                                                                                                                                                 

Buffer Type: SXP Trace
Buffer Id: 0
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 49th at 17:03:03.
00:00:00:01:265 EMC: Setting Update lock: 1
00:00:00:01:399 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:420 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:440 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:460 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:482 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:502 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:507 EMC: Failed to get Power Supply revision info.
00:00:00:01:514 EMC: SXP FW Version:   04.05
00:00:00:01:518 EMC: SXP BOOT Version: 03.00
00:00:00:01:522 EMC: SXP ISTR Version: 03.05
00:00:00:01:526 EMC: MC Version:       16.01
00:00:00:01:531 EMC: DLMC Version:     14.47
00:00:00:01:535 EMC: PS Version:       00.01
00:00:00:01:539 EMC: CPLD Version:     00.09
00:00:00:01:543 EMC: Base SAS Address: 50060480_00b680c0
00:00:00:01:548 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:557 EMC: Exception flag read from register is 0
00:00:00:00:985 EMC: Setting enclosure number to 255
00:00:00:01:005 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:01:026 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:049 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:069 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:090 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:112 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:119 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:142 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:165 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:185 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:239 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:259 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:265 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:287 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:308 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:330 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:350 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:370 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:375 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:383 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:01:389 EMC: Checking for updated FW!
00:00:00:01:393 EMC: Checking for SXP FW download
00:00:00:01:420 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:01:435 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:01:440 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:15:669 WDG EXPIRED: Elapsed time since last WDG run: 799 ms
00:00:00:15:674 WDG: Pong not received from: EMA
                                              

Buffer Type: SXP Trace
Buffer Id: 1
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 946
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:15.7
00:00:00:01:264 EMC: Setting Update lock: 1
00:00:00:01:350 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:384 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:404 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:424 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:445 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:467 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:472 EMC: Failed to get Power Supply revision info.
00:00:00:01:478 EMC: SXP FW Version:   04.05
00:00:00:01:483 EMC: SXP BOOT Version: 03.00
00:00:00:01:487 EMC: SXP ISTR Version: 03.05
00:00:00:01:491 EMC: MC Version:       16.01
00:00:00:01:497 EMC: DLMC Version:     14.47
00:00:00:01:501 EMC: PS Version:       00.01
00:00:00:01:505 EMC: CPLD Version:     00.13
00:00:00:15:768 WDG EXPIRED: Elapsed time since last WDG run: 229 ms
00:00:00:15:773 WDG: Pong not received from: EMA
                 

Buffer Type: SXP Trace
Buffer Id: 2
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:51.
00:00:00:01:263 EMC: Setting Update lock: 1
00:00:00:01:349 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:382 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:402 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:423 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:443 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:465 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:470 EMC: Failed to get Power Supply revision info.
00:00:00:01:476 EMC: SXP FW Version:   04.05
00:00:00:01:481 EMC: SXP BOOT Version: 03.00
00:00:00:01:485 EMC: SXP ISTR Version: 03.05
00:00:00:01:489 EMC: MC Version:       16.01
00:00:00:01:493 EMC: DLMC Version:     14.47
00:00:00:01:498 EMC: PS Version:       00.01
00:00:00:01:502 EMC: CPLD Version:     00.13
00:00:00:01:506 EMC: Base SAS Address: 50060480_00fa80c0
00:00:00:01:510 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:520 EMC: Exception flag read from register is 1
00:00:00:36:984 EMC: Setting enclosure number to 255
00:00:00:37:003 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:37:046 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:068 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:089 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:109 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:130 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:136 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:160 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:183 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:204 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:225 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:269 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:274 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:298 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:321 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:342 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:363 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:385 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:390 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:397 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:37:404 EMC: Checking for updated FW!
00:00:00:37:408 EMC: Checking for SXP FW download
00:00:00:37:436 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:37:451 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:37:456 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:51:683 WDG EXPIRED: Elapsed time since last WDG run: 792 ms
00:00:00:51:688 WDG: Pong not received from: EMA
                                              

Buffer Type: Expander Ring Buffer Trace
Buffer Id: 255
Source: Manual
SXP Major Rev: 04
SXP Minor Rev: 30
Length: -1
Timestamp: 06/09/2012 01:27:47
        
27:23:33:13.815 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
27:23:33:13.848 EMC: DISPLAY command success, encl number=01, mode=C.
27:23:33:13.958 EMC: Sending changed local info to peer.
27:23:33:18.448 EMC: Flare polling state restored because good generation number 0x7e00 received.
27:23:33:18.456 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
27:23:33:18.464 Setting CPLD activity LED mode to AND because both sides being polled.
27:23:33:18.471 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
27:23:33:18.515 EMC: DISPLAY command success, encl number=01, mode=4.
27:23:33:18.557 EMC: Resynchronizing to Flare time: 2417664937 ms; timestamp adjusted to: 0 ms.
27:23:34:25.646 EMC: Sending changed local info to peer.
28:00:00:00.144 EMC: New Day 28
28:00:00:01.376 EMC: Resynchronizing to Flare time: 2419206687 ms; timestamp adjusted to: 0 ms.
29:00:00:00.097 EMC: New Day 29
29:00:00:01.651 EMC: Resynchronizing to Flare time: 2505690625 ms; timestamp adjusted to: 0 ms.
29:06:38:57.010 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
29:06:38:57.016 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
29:06:38:57.026 Setting CPLD activity LED mode to OR because both sides not being polled.
29:06:38:57.035 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
29:06:38:57.057 EMC: DISPLAY command success, encl number=01, mode=C.
29:06:38:57.104 EMC: Sending changed local info to peer.
29:06:39:00.287 EMC: Flare polling state restored because good generation number 0x7e00 received.
29:06:39:00.295 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
29:06:39:00.302 Setting CPLD activity LED mode to AND because both sides being polled.
29:06:39:00.310 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
29:06:39:00.333 EMC: DISPLAY command success, encl number=01, mode=4.
29:06:39:00.358 EMC: Resynchronizing to Flare time: 2529564968 ms; timestamp adjusted to: 0 ms.
29:06:39:25.213 EMC: Sending changed local info to peer.
30:00:00:00.613 EMC: New Day 30
30:00:00:01.509 EMC: Resynchronizing to Flare time: 2592066218 ms; timestamp adjusted to: 0 ms.
30:15:20:22.441 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
30:15:20:22.447 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
30:15:20:22.456 Setting CPLD activity LED mode to OR because both sides not being polled.
30:15:20:22.465 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
30:15:20:22.488 EMC: DISPLAY command success, encl number=01, mode=C.
30:15:20:22.530 EMC: Sending changed local info to peer.
30:15:20:25.718 EMC: Flare polling state restored because good generation number 0x7e00 received.
30:15:20:25.726 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
30:15:20:25.734 Setting CPLD activity LED mode to AND because both sides being polled.
30:15:20:25.741 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
30:15:20:25.780 EMC: DISPLAY command success, encl number=01, mode=4.
30:15:20:25.800 EMC: Sending changed local info to peer.
30:15:20:25.815 EMC: Resynchronizing to Flare time: 2647283093 ms; timestamp adjusted to: 0 ms.
30:15:21:24.327 EMC: ...read processing took 0 ms, status=Success
30:15:21:24.977 EMC: ...write took 645 ms, status=Success
31:00:00:00.497 EMC: New Day 31
31:00:00:02.938 EMC: Resynchronizing to Flare time: 2678435281 ms; timestamp adjusted to: 0 ms.
32:00:00:00.010 EMC: New Day 32
32:00:00:00.770 EMC: Year 2012, Month 6
32:00:00:00.792 EMC: Resynchronizing to Flare time: 86489656 ms; timestamp adjusted to: 0 ms.
02:00:00:00.003 EMC: New Day 2
02:00:00:03.245 EMC: Resynchronizing to Flare time: 172891531 ms; timestamp adjusted to: 0 ms.
02:08:09:39.732 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
02:08:09:39.755 EMC: DISPLAY command success, encl number=01, mode=4.
02:08:09:40.054 Setting CPLD activity LED mode to OR because both sides not being polled.
02:08:09:42.992 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
02:08:09:43.004 EMC: DISPLAY command success, encl number=01, mode=4.
02:08:09:43.314 Setting CPLD activity LED mode to AND because both sides being polled.
03:00:00:00.421 EMC: New Day 3
03:00:00:02.177 EMC: Resynchronizing to Flare time: 259290125 ms; timestamp adjusted to: 0 ms.
03:10:33:58.967 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
03:10:33:58.991 EMC: DISPLAY command success, encl number=01, mode=4.
03:10:33:59.300 Setting CPLD activity LED mode to OR because both sides not being polled.
03:10:34:01.896 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
03:10:34:01.918 EMC: DISPLAY command success, encl number=01, mode=4.
03:10:34:02.224 Setting CPLD activity LED mode to AND because both sides being polled.
04:00:00:00.004 EMC: New Day 4
04:00:00:03.217 EMC: Resynchronizing to Flare time: 345692000 ms; timestamp adjusted to: 0 ms.
04:13:39:33.355 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
04:13:39:33.364 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
04:13:39:33.372 Setting CPLD activity LED mode to OR because both sides not being polled.
04:13:39:33.382 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
04:13:39:33.417 EMC: DISPLAY command success, encl number=01, mode=C.
04:13:39:33.530 EMC: Sending changed local info to peer.
04:13:39:37.535 EMC: Flare polling state restored because good generation number 0x7e00 received.
04:13:39:37.544 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
04:13:39:37.551 Setting CPLD activity LED mode to AND because both sides being polled.
04:13:39:37.559 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
04:13:39:37.584 EMC: DISPLAY command success, encl number=01, mode=4.
04:13:39:37.606 EMC: Resynchronizing to Flare time: 394824828 ms; timestamp adjusted to: 0 ms.
04:13:40:25.076 EMC: Sending changed local info to peer.
04:13:40:30.256 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
04:13:40:30.265 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
04:13:40:30.272 Setting CPLD activity LED mode to OR because both sides not being polled.
04:13:40:30.284 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
04:13:40:30.306 EMC: DISPLAY command success, encl number=01, mode=C.
04:13:40:30.408 EMC: Sending changed local info to peer.
04:13:40:32.500 EMC: Flare polling state restored because good generation number 0x7e00 received.
04:13:40:32.508 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
04:13:40:32.517 Setting CPLD activity LED mode to AND because both sides being polled.
04:13:40:32.519 EMC: Sending changed local info to peer.
04:13:40:32.523 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
04:13:40:32.571 EMC: DISPLAY command success, encl number=01, mode=4.
05:00:00:00.017 EMC: New Day 5
05:00:00:02.674 EMC: Resynchronizing to Flare time: 432041375 ms; timestamp adjusted to: 0 ms.
06:00:00:00.250 EMC: New Day 6
06:00:00:02.927 EMC: Resynchronizing to Flare time: 518492500 ms; timestamp adjusted to: 0 ms.
06:04:56:16.508 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
06:04:56:16.515 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
06:04:56:16.522 Setting CPLD activity LED mode to OR because both sides not being polled.
06:04:56:16.531 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:04:56:16.554 EMC: DISPLAY command success, encl number=01, mode=C.
06:04:56:16.599 EMC: Sending changed local info to peer.
06:04:56:19.785 EMC: Flare polling state restored because good generation number 0x7e00 received.
06:04:56:19.793 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
06:04:56:19.802 Setting CPLD activity LED mode to AND because both sides being polled.
06:04:56:19.809 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:04:56:19.836 EMC: DISPLAY command success, encl number=01, mode=4.
06:04:56:19.858 EMC: Resynchronizing to Flare time: 536198093 ms; timestamp adjusted to: 0 ms.
06:04:56:38.376 EMC: Sending changed local info to peer.
07:00:00:00.021 EMC: New Day 7
07:00:00:00.800 EMC: Resynchronizing to Flare time: 604871375 ms; timestamp adjusted to: 0 ms.
07:08:34:55.488 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
07:08:34:55.497 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
07:08:34:55.504 Setting CPLD activity LED mode to OR because both sides not being polled.
07:08:34:55.516 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
07:08:34:55.549 EMC: DISPLAY command success, encl number=01, mode=C.
07:08:34:55.662 EMC: Sending changed local info to peer.
07:08:35:04.091 EMC: Flare polling state restored because good generation number 0x7e00 received.
07:08:35:04.098 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
07:08:35:04.107 Setting CPLD activity LED mode to AND because both sides being polled.
07:08:35:04.114 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
07:08:35:04.135 EMC: Sending changed local info to peer.
07:08:35:04.145 EMC: DISPLAY command success, encl number=01, mode=4.
07:08:35:04.188 EMC: Resynchronizing to Flare time: 635735625 ms; timestamp adjusted to: 0 ms.
08:00:00:00.492 EMC: New Day 8
08:00:00:03.643 EMC: Resynchronizing to Flare time: 691260125 ms; timestamp adjusted to: 0 ms.
08:07:44:03.856 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
08:07:44:03.864 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
08:07:44:03.871 Setting CPLD activity LED mode to OR because both sides not being polled.
08:07:44:03.880 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
08:07:44:03.902 EMC: DISPLAY command success, encl number=01, mode=C.
08:07:44:03.948 EMC: Sending changed local info to peer.
08:07:44:07.135 EMC: Flare polling state restored because good generation number 0x7e00 received.
08:07:44:07.143 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
08:07:44:07.150 Setting CPLD activity LED mode to AND because both sides being polled.
08:07:44:07.155 EMC: Sending changed local info to peer.
08:07:44:07.157 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
08:07:44:07.205 EMC: DISPLAY command success, encl number=01, mode=4.
08:07:44:07.244 EMC: Resynchronizing to Flare time: 719075281 ms; timestamp adjusted to: 0 ms.
08:07:47:47.227 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
08:07:47:47.250 EMC: DISPLAY command success, encl number=01, mode=4.
08:07:47:47.556 Setting CPLD activity LED mode to OR because both sides not being polled.
08:07:47:50.758 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
08:07:47:50.770 EMC: DISPLAY command success, encl number=01, mode=4.
08:07:47:51.082 Setting CPLD activity LED mode to AND because both sides being polled.
08:10:52:41.080 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
08:10:52:41.088 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
08:10:52:41.095 Setting CPLD activity LED mode to OR because both sides not being polled.
08:10:52:41.104 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
08:10:52:41.126 EMC: DISPLAY command success, encl number=01, mode=C.
08:10:52:41.171 EMC: Sending changed local info to peer.
08:10:52:44.360 EMC: Flare polling state restored because good generation number 0x7e00 received.
08:10:52:44.369 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
08:10:52:44.376 Setting CPLD activity LED mode to AND because both sides being polled.
08:10:52:44.384 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
08:10:52:44.407 EMC: DISPLAY command success, encl number=01, mode=4.
08:10:52:44.430 EMC: Resynchronizing to Flare time: 730375906 ms; timestamp adjusted to: 0 ms.
08:10:52:56.164 EMC: Sending changed local info to peer.
09:00:00:00.202 EMC: New Day 9
09:00:00:00.415 EMC: Resynchronizing to Flare time: 777648875 ms; timestamp adjusted to: 0 ms.
                                                                                                                                                                 

Buffer Type: SXP Trace
Buffer Id: 0
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 49th at 17:03:03.
00:00:00:01:265 EMC: Setting Update lock: 1
00:00:00:01:399 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:420 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:440 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:460 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:482 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:502 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:507 EMC: Failed to get Power Supply revision info.
00:00:00:01:514 EMC: SXP FW Version:   04.05
00:00:00:01:518 EMC: SXP BOOT Version: 03.00
00:00:00:01:522 EMC: SXP ISTR Version: 03.05
00:00:00:01:526 EMC: MC Version:       16.01
00:00:00:01:531 EMC: DLMC Version:     14.47
00:00:00:01:535 EMC: PS Version:       00.01
00:00:00:01:539 EMC: CPLD Version:     00.09
00:00:00:01:543 EMC: Base SAS Address: 50060480_00b680c0
00:00:00:01:548 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:557 EMC: Exception flag read from register is 0
00:00:00:00:985 EMC: Setting enclosure number to 255
00:00:00:01:005 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:01:026 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:049 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:069 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:090 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:112 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:119 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:142 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:165 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:185 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:239 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:259 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:265 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:287 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:308 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:330 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:350 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:370 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:01:375 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:01:383 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:01:389 EMC: Checking for updated FW!
00:00:00:01:393 EMC: Checking for SXP FW download
00:00:00:01:420 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:01:435 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:01:440 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:15:669 WDG EXPIRED: Elapsed time since last WDG run: 799 ms
00:00:00:15:674 WDG: Pong not received from: EMA
                                              

Buffer Type: SXP Trace
Buffer Id: 1
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 946
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:15.7
00:00:00:01:264 EMC: Setting Update lock: 1
00:00:00:01:350 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:384 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:404 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:424 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:445 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:467 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:472 EMC: Failed to get Power Supply revision info.
00:00:00:01:478 EMC: SXP FW Version:   04.05
00:00:00:01:483 EMC: SXP BOOT Version: 03.00
00:00:00:01:487 EMC: SXP ISTR Version: 03.05
00:00:00:01:491 EMC: MC Version:       16.01
00:00:00:01:497 EMC: DLMC Version:     14.47
00:00:00:01:501 EMC: PS Version:       00.01
00:00:00:01:505 EMC: CPLD Version:     00.13
00:00:00:15:768 WDG EXPIRED: Elapsed time since last WDG run: 229 ms
00:00:00:15:773 WDG: Pong not received from: EMA
                 

Buffer Type: SXP Trace
Buffer Id: 2
Source: Invalid Source
SXP Major Rev: 4
SXP Minor Rev: 5
Length: 2934
 Mem Dump: no
Timestamp: Saved on 00th at 00:00:51.
00:00:00:01:263 EMC: Setting Update lock: 1
00:00:00:01:349 EMC: Getting Power Supply revision info addr=0.
00:00:00:01:382 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:402 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:423 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:443 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:465 EMC: Error "? H" on reply to command: "N0" to MC
00:00:00:01:470 EMC: Failed to get Power Supply revision info.
00:00:00:01:476 EMC: SXP FW Version:   04.05
00:00:00:01:481 EMC: SXP BOOT Version: 03.00
00:00:00:01:485 EMC: SXP ISTR Version: 03.05
00:00:00:01:489 EMC: MC Version:       16.01
00:00:00:01:493 EMC: DLMC Version:     14.47
00:00:00:01:498 EMC: PS Version:       00.01
00:00:00:01:502 EMC: CPLD Version:     00.13
00:00:00:01:506 EMC: Base SAS Address: 50060480_00fa80c0
00:00:00:01:510 EMC: In poll_init MC Attention Status: Ready: 1 code csum: 0 data csum: 0 SPA: 0
00:00:00:01:520 EMC: Exception flag read from register is 1
00:00:00:36:984 EMC: Setting enclosure number to 255
00:00:00:37:003 EMC: DISPLAY command success, encl number=--, mode=C.
00:00:00:37:046 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:068 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:089 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:109 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:130 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:136 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:160 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:183 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:204 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:225 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:269 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:274 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:298 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:321 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:342 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:363 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:385 EMC: Error "? H" on reply to command: "p53B" to MC
00:00:00:37:390 EMC: EEprom read error 0x20000000 for prom: 3 offset: 0x760 bytes: 4
00:00:00:37:397 EMC: Setting unique ID to 0xFFFFFFFF
00:00:00:37:404 EMC: Checking for updated FW!
00:00:00:37:408 EMC: Checking for SXP FW download
00:00:00:37:436 EMC: Checking BOOT FW revs: actual: 3.0 flash: 65535.65535
00:00:00:37:451 EMC: Checking ISTR FW revs: actual: 3.5 flash: 3.5
00:00:00:37:456 EMC: Checking MAIN SXP FW revs: actual: 4.5 flash: 4.5
00:00:00:51:683 WDG EXPIRED: Elapsed time since last WDG run: 792 ms
00:00:00:51:688 WDG: Pong not received from: EMA
                                              

Buffer Type: Expander Ring Buffer Trace
Buffer Id: 255
Source: Manual
SXP Major Rev: 04
SXP Minor Rev: 30
Length: -1
Timestamp: 06/11/2012 07:53:02
        
27:23:33:18.456 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
27:23:33:18.464 Setting CPLD activity LED mode to AND because both sides being polled.
27:23:33:18.471 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
27:23:33:18.515 EMC: DISPLAY command success, encl number=01, mode=4.
27:23:33:18.557 EMC: Resynchronizing to Flare time: 2417664937 ms; timestamp adjusted to: 0 ms.
27:23:34:25.646 EMC: Sending changed local info to peer.
28:00:00:00.144 EMC: New Day 28
28:00:00:01.376 EMC: Resynchronizing to Flare time: 2419206687 ms; timestamp adjusted to: 0 ms.
29:00:00:00.097 EMC: New Day 29
29:00:00:01.651 EMC: Resynchronizing to Flare time: 2505690625 ms; timestamp adjusted to: 0 ms.
29:06:38:57.010 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
29:06:38:57.016 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
29:06:38:57.026 Setting CPLD activity LED mode to OR because both sides not being polled.
29:06:38:57.035 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
29:06:38:57.057 EMC: DISPLAY command success, encl number=01, mode=C.
29:06:38:57.104 EMC: Sending changed local info to peer.
29:06:39:00.287 EMC: Flare polling state restored because good generation number 0x7e00 received.
29:06:39:00.295 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
29:06:39:00.302 Setting CPLD activity LED mode to AND because both sides being polled.
29:06:39:00.310 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
29:06:39:00.333 EMC: DISPLAY command success, encl number=01, mode=4.
29:06:39:00.358 EMC: Resynchronizing to Flare time: 2529564968 ms; timestamp adjusted to: 0 ms.
29:06:39:25.213 EMC: Sending changed local info to peer.
30:00:00:00.613 EMC: New Day 30
30:00:00:01.509 EMC: Resynchronizing to Flare time: 2592066218 ms; timestamp adjusted to: 0 ms.
30:15:20:22.441 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
30:15:20:22.447 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
30:15:20:22.456 Setting CPLD activity LED mode to OR because both sides not being polled.
30:15:20:22.465 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
30:15:20:22.488 EMC: DISPLAY command success, encl number=01, mode=C.
30:15:20:22.530 EMC: Sending changed local info to peer.
30:15:20:25.718 EMC: Flare polling state restored because good generation number 0x7e00 received.
30:15:20:25.726 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
30:15:20:25.734 Setting CPLD activity LED mode to AND because both sides being polled.
30:15:20:25.741 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
30:15:20:25.780 EMC: DISPLAY command success, encl number=01, mode=4.
30:15:20:25.800 EMC: Sending changed local info to peer.
30:15:20:25.815 EMC: Resynchronizing to Flare time: 2647283093 ms; timestamp adjusted to: 0 ms.
30:15:21:24.327 EMC: ...read processing took 0 ms, status=Success
30:15:21:24.977 EMC: ...write took 645 ms, status=Success
31:00:00:00.497 EMC: New Day 31
31:00:00:02.938 EMC: Resynchronizing to Flare time: 2678435281 ms; timestamp adjusted to: 0 ms.
32:00:00:00.010 EMC: New Day 32
32:00:00:00.770 EMC: Year 2012, Month 6
32:00:00:00.792 EMC: Resynchronizing to Flare time: 86489656 ms; timestamp adjusted to: 0 ms.
02:00:00:00.003 EMC: New Day 2
02:00:00:03.245 EMC: Resynchronizing to Flare time: 172891531 ms; timestamp adjusted to: 0 ms.
02:08:09:39.732 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
02:08:09:39.755 EMC: DISPLAY command success, encl number=01, mode=4.
02:08:09:40.054 Setting CPLD activity LED mode to OR because both sides not being polled.
02:08:09:42.992 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
02:08:09:43.004 EMC: DISPLAY command success, encl number=01, mode=4.
02:08:09:43.314 Setting CPLD activity LED mode to AND because both sides being polled.
03:00:00:00.421 EMC: New Day 3
03:00:00:02.177 EMC: Resynchronizing to Flare time: 259290125 ms; timestamp adjusted to: 0 ms.
03:10:33:58.967 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
03:10:33:58.991 EMC: DISPLAY command success, encl number=01, mode=4.
03:10:33:59.300 Setting CPLD activity LED mode to OR because both sides not being polled.
03:10:34:01.896 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
03:10:34:01.918 EMC: DISPLAY command success, encl number=01, mode=4.
03:10:34:02.224 Setting CPLD activity LED mode to AND because both sides being polled.
04:00:00:00.004 EMC: New Day 4
04:00:00:03.217 EMC: Resynchronizing to Flare time: 345692000 ms; timestamp adjusted to: 0 ms.
04:13:39:33.355 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
04:13:39:33.364 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
04:13:39:33.372 Setting CPLD activity LED mode to OR because both sides not being polled.
04:13:39:33.382 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
04:13:39:33.417 EMC: DISPLAY command success, encl number=01, mode=C.
04:13:39:33.530 EMC: Sending changed local info to peer.
04:13:39:37.535 EMC: Flare polling state restored because good generation number 0x7e00 received.
04:13:39:37.544 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
04:13:39:37.551 Setting CPLD activity LED mode to AND because both sides being polled.
04:13:39:37.559 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
04:13:39:37.584 EMC: DISPLAY command success, encl number=01, mode=4.
04:13:39:37.606 EMC: Resynchronizing to Flare time: 394824828 ms; timestamp adjusted to: 0 ms.
04:13:40:25.076 EMC: Sending changed local info to peer.
04:13:40:30.256 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
04:13:40:30.265 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
04:13:40:30.272 Setting CPLD activity LED mode to OR because both sides not being polled.
04:13:40:30.284 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
04:13:40:30.306 EMC: DISPLAY command success, encl number=01, mode=C.
04:13:40:30.408 EMC: Sending changed local info to peer.
04:13:40:32.500 EMC: Flare polling state restored because good generation number 0x7e00 received.
04:13:40:32.508 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
04:13:40:32.517 Setting CPLD activity LED mode to AND because both sides being polled.
04:13:40:32.519 EMC: Sending changed local info to peer.
04:13:40:32.523 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
04:13:40:32.571 EMC: DISPLAY command success, encl number=01, mode=4.
05:00:00:00.017 EMC: New Day 5
05:00:00:02.674 EMC: Resynchronizing to Flare time: 432041375 ms; timestamp adjusted to: 0 ms.
06:00:00:00.250 EMC: New Day 6
06:00:00:02.927 EMC: Resynchronizing to Flare time: 518492500 ms; timestamp adjusted to: 0 ms.
06:04:56:16.508 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
06:04:56:16.515 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
06:04:56:16.522 Setting CPLD activity LED mode to OR because both sides not being polled.
06:04:56:16.531 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:04:56:16.554 EMC: DISPLAY command success, encl number=01, mode=C.
06:04:56:16.599 EMC: Sending changed local info to peer.
06:04:56:19.785 EMC: Flare polling state restored because good generation number 0x7e00 received.
06:04:56:19.793 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
06:04:56:19.802 Setting CPLD activity LED mode to AND because both sides being polled.
06:04:56:19.809 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
06:04:56:19.836 EMC: DISPLAY command success, encl number=01, mode=4.
06:04:56:19.858 EMC: Resynchronizing to Flare time: 536198093 ms; timestamp adjusted to: 0 ms.
06:04:56:38.376 EMC: Sending changed local info to peer.
07:00:00:00.021 EMC: New Day 7
07:00:00:00.800 EMC: Resynchronizing to Flare time: 604871375 ms; timestamp adjusted to: 0 ms.
07:08:34:55.488 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
07:08:34:55.497 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
07:08:34:55.504 Setting CPLD activity LED mode to OR because both sides not being polled.
07:08:34:55.516 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
07:08:34:55.549 EMC: DISPLAY command success, encl number=01, mode=C.
07:08:34:55.662 EMC: Sending changed local info to peer.
07:08:35:04.091 EMC: Flare polling state restored because good generation number 0x7e00 received.
07:08:35:04.098 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
07:08:35:04.107 Setting CPLD activity LED mode to AND because both sides being polled.
07:08:35:04.114 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
07:08:35:04.135 EMC: Sending changed local info to peer.
07:08:35:04.145 EMC: DISPLAY command success, encl number=01, mode=4.
07:08:35:04.188 EMC: Resynchronizing to Flare time: 635735625 ms; timestamp adjusted to: 0 ms.
08:00:00:00.492 EMC: New Day 8
08:00:00:03.643 EMC: Resynchronizing to Flare time: 691260125 ms; timestamp adjusted to: 0 ms.
08:07:44:03.856 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
08:07:44:03.864 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
08:07:44:03.871 Setting CPLD activity LED mode to OR because both sides not being polled.
08:07:44:03.880 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
08:07:44:03.902 EMC: DISPLAY command success, encl number=01, mode=C.
08:07:44:03.948 EMC: Sending changed local info to peer.
08:07:44:07.135 EMC: Flare polling state restored because good generation number 0x7e00 received.
08:07:44:07.143 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
08:07:44:07.150 Setting CPLD activity LED mode to AND because both sides being polled.
08:07:44:07.155 EMC: Sending changed local info to peer.
08:07:44:07.157 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
08:07:44:07.205 EMC: DISPLAY command success, encl number=01, mode=4.
08:07:44:07.244 EMC: Resynchronizing to Flare time: 719075281 ms; timestamp adjusted to: 0 ms.
08:07:47:47.227 EMC: Flare polling state change: self YES to YES, peer YES to FAILED
08:07:47:47.250 EMC: DISPLAY command success, encl number=01, mode=4.
08:07:47:47.556 Setting CPLD activity LED mode to OR because both sides not being polled.
08:07:47:50.758 EMC: Flare polling state change: self YES to YES, peer FAILED to YES
08:07:47:50.770 EMC: DISPLAY command success, encl number=01, mode=4.
08:07:47:51.082 Setting CPLD activity LED mode to AND because both sides being polled.
08:10:52:41.080 EMC: Flare poll not received in over 5 sec.  Considering Flare dead.
08:10:52:41.088 EMC: Flare polling state change: self YES to FAILED, peer YES to YES
08:10:52:41.095 Setting CPLD activity LED mode to OR because both sides not being polled.
08:10:52:41.104 EMC: Set activity LED OFF for slot 0,1,2,3,4,5,6,7,8,9,10,11
08:10:52:41.126 EMC: DISPLAY command success, encl number=01, mode=C.
08:10:52:41.171 EMC: Sending changed local info to peer.
08:10:52:44.360 EMC: Flare polling state restored because good generation number 0x7e00 received.
08:10:52:44.369 EMC: Flare polling state change: self FAILED to YES, peer YES to YES
08:10:52:44.376 Setting CPLD activity LED mode to AND because both sides being polled.
08:10:52:44.384 EMC: Set activity LED ON for slot 0,1,2,3,4,5,6,7,8,9,10,11
08:10:52:44.407 EMC: DISPLAY command success, encl number=01, mode=4.
08:10:52:44.430 EMC: Resynchronizing to Flare time: 730375906 ms; timestamp adjusted to: 0 ms.
08:10:52:56.164 EMC: Sending changed local info to peer.
09:00:00:00.202 EMC: New Day 9
09:00:00:00.415 EMC: Resynchronizing to Flare time: 777648875 ms; timestamp adjusted to: 0 ms.
10:00:00:00.199 EMC: New Day 10
10:00:00:01.402 EMC: Resynchronizing to Flare time: 864090156 ms; timestamp adjusted to: 0 ms.
11:00:00:00.060 EMC: New Day 11
11:00:00:02.666 EMC: Resynchronizing to Flare time: 950492000 ms; timestamp adjusted to: 0 ms.
                                                                                                                                                                 