# CallHomeEventTypes.txt
# All the callHome events and it's details irrespective of switch/Router families
# PLEASE DO NOT EDIT THIS FILE
# author : Jayakrishna G

010, None/SW, 	    Login Server unable to synchronize databases.,                  2
011, None/SW, 	    Login Server database found to be invalid.,                     2
020, None/SW, 	    Name Server unable to synchronize databases.,                   2
021, None/SW, 	    Name Server database found to be invalid.,			    2
040, None/SW,       Operator panel has failed.,                                     2
050, None/SW, 	    Management Server unable to synchronize databases.,	            2
051, None/SW,       Management Server database found to be invalid. ,               2
060, None/SW,       Fabric Controller unable to synchronize databases.,             2
061, None/SW,       Fabric Controller database found to be invalid.,                2
82, CTP/SW,        Port is blocked by port fencing.,                               3
090, None/SW,       Database replication time out.,                                 2
153, PWR/HW,        ifcpBackupActivated.,                                           4
154, PWR/HW,        ifcpRemoteConnectionDown.,                                      4
155, PWR/HW,        CallHomeRPortError,                                             3
200, None/SW,       Power supply AC voltage failure.,                               3
201, PWR/HW,        Power supply DC voltage failure.,                               3
202, PWR/HW,        Power supply thermal failure.,                                  3
208, PWR/HW,        Power supply false shutdown.,                                   3
300, FAN/HW,        A cooling fan propeller has failed.,                            3
301, FAN/HW,        A cooling fan propeller has failed (two failed propellers).,    3
302, FAN/HW,        A cooling fan propeller has failed.,                            3
303, FAN/HW,        A cooling fan propeller has failed.,                            3
304, FAN/HW,        A cooling fan propeller has failed.,                            3
305, FAN/HW,        A cooling fan propeller has failed.,                            3
306, FAN/HW,        A cooling fan propeller in FAN2 FRU type has failed.,           3
307, FAN/HW,        A cooling fan propeller in FAN2 FRU type has failed.,           3
322, FAN/HW,        Front top fan FRU failed.,                                      3
323, FAN/HW,        Front bottom fan FRU failed.,                                   3
324, FAN/HW,        Rear top fan FRU failed.,                                       3
400, CTP/HW,        Power-up diagnostic failure.,                                   3
411, CTP/SW,        Firmware fault occured.,                                        3
413, CTP/HW,        Backup CTP power-on self test failure.,                         3
414, CTP/HW,        Backup CTP failure.,                                            3
419, CTP/INFO,      Board NVRAM failure.,                                           3
420, CTP/HW,        CTP non-volatile memory failure.,                               3
425, CTP/HW,        CTP DRAM mismatch.,                                             3
427, CTP/HW,        Utility Bus Erros detected by backup CTP.,                      3
433, CTP/SW,        Non-recoverable Ethernet fault.,                                3
440, CTP/HW,        Embedded Port fatal error.,                                     3
473, CTP/SW,        CTP shutdown due to failure.,                                   3
488, CTP/HW,        Critical CTP failure on single CTP system.,                     3

#CONSRV events
504, DVP/LIM/HW,    EOS: Port module failure.,                                      3
506, DVP/PORT,      Fibre Channel port failure,  	                            3
509, DVP/PORT,      Fibre Channel path failure.,                                    0
511, LIM/DVP,       LIM SPP failure.,                                               3
514, DVP/ LIM/PORT, SFP/XFP optics failure.,                                        3

517, LIM,           LIM SPP Offline.,                                               3
530, LIM/DVP,       LIM Power-up diagnostic failure.,                               3
604, SBAR/SWM/HW,   EOS: SBAR module failure.,                                      3
607, SBAR/SWM/HW,   EOS: Switch contains no operational SBAR cards.,                4
622, SBAR/INFO,     SWM powered off ,                                               0
623, SBAR/INFO,     SWM powered on,                                                 0
624, SBAR/INFO,     SWM disengaged,                                                 0


# Thermal Event Reason Codes
800, DVP/LIM/HW,    High temperature warning.,                                      3
801, DVP/LIM/HW,    Critically hot temperature warning.,                            3
802, DVP/LIM/HW,    EOS: Port card shutdown due to thermal violations.,             3
805, SWM/SBAR/HW,   High temperature warning.,                                      3
806, SWM/SBAR/HW,   Critically hot temperature warning.,                            3
807, SWM/SBAR/HW,   EOS: SBAR module shutdown due to thermal violations.,           3
810, CTP/HW,        High temperature warning.,                                      3
811, CTP/HW,        Critically hot temperature warning.,                            3
812, CTP/HW,        CTP shutdown due to thermal violations.,                        3
850, CTP/HW,        System shutdown due to CTP thermal threshold violations.,       4

# QLogic Events
895, 1003.0017,     A zone member defined by domain ID and port was received within a management server AZSD command with a port number out of range.,   4
903, 1003.0022,     Modifications were being made to the security database while a security set was being activated or deactivated from a remote switch., 4
907, 1003.0031,     A device supporting management server has sent an Activate Zoneset Direct $(AZSD) command that did not follow the expected standard layout., 4
992, 3003.0003,     Diagnostic testing has determined that there is a failure on specified I/O blade. The blade did not pass the Power-On-Self-Test (POST)., 4
993, 3004.0001,     A non-fatal hardware error was discovered during the Power-On-Self-Test (POST) phase of startup., 4
994, 3004.0002,     Diagnostic testing has determined that there is a partial failure on specified I/O blade. Most likely at least one of the ports did not pass the Power-On-Self-Test (POST)., 4
999, 6001.0001,     The Hotreset command has failed due to insufficient memory on the switch. The switch has been returned to its state before the Hotreset command was entered., 4
#Brocade Events

1009, MS-1009,  Error in registered link incident record (RLIR)., 4
1426, FW-1426,  Faulty or Missing Power supply., 3
1427, FW-1427,  Faulty Power supply., 3
1428, FW-1428,  Missing Power supply., 3
1429, FW-1429,  Problem in power supply arrangement., 3
1430, FW-1430,  Faulty Temperature sensors., 3
1431, FW-1431,  Faulty fans., 3
1432, FW-1432,  Faulty WWN Cards., 3
1433, FW-1433,  Faulty CPs., 3
1434, FW-1434,  Faulty Blades., 3
1402, FW-1402,  Flash usage is out of range., 3
1436, FW-1436,  Marginal port., 3
1437, FW-1437,  Faulty Port., 3
1438, FW-1438,  Faulty or Missing SFPs., 3