*************************** Last Successful Snapshot as of: Sat Feb 27 17:04:37 GMT+00:00 2016 *************************** ############ MultiConfigPart @uname -a Linux hkgctisvxms8005 2.6.32-220.7.1.el6.x86_64 #1 SMP Wed Mar 7 00:52:02 GMT 2012 x86_64 x86_64 x86_64 GNU/Linux ############ MultiConfigPart END ############ MultiConfigPart @hostname hkgctisvxms8005 ############ MultiConfigPart END ############ MultiConfigPart @domainname (none) ############ MultiConfigPart END ############ MultiConfigPart @/sbin/ifconfig -a eth0 Link encap:Ethernet HWaddr 00:50:56:AF:58:3C inet addr:163.36.108.202 Bcast:163.36.108.255 Mask:255.255.255.0 inet6 addr: fe80::250:56ff:feaf:583c/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5155074247 errors:0 dropped:0 overruns:0 frame:0 TX packets:5005735981 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3173795166885 (2.8 TiB) TX bytes:1996373867716 (1.8 TiB) eth1 Link encap:Ethernet HWaddr 00:50:56:AF:58:3D inet addr:169.254.254.1 Bcast:169.254.255.255 Mask:255.255.240.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) eth2 Link encap:Ethernet HWaddr 00:50:56:AF:58:3E BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) eth3 Link encap:Ethernet HWaddr 00:50:56:AF:58:3F BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:239889365 errors:0 dropped:0 overruns:0 frame:0 TX packets:239889365 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1462929176896 (1.3 TiB) TX bytes:1462929176896 (1.3 TiB) ############ MultiConfigPart END ############ MultiConfigPart @netstat -nl Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:42501 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:42502 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:42503 0.0.0.0:* LISTEN tcp 0 0 :::80 :::* LISTEN tcp 0 0 :::22 :::* LISTEN tcp 0 0 ::1:25 :::* LISTEN tcp 0 0 :::443 :::* LISTEN udp 0 0 0.0.0.0:39370 0.0.0.0:* udp 0 0 0.0.0.0:55762 0.0.0.0:* udp 0 0 169.254.254.1:123 0.0.0.0:* udp 0 0 163.36.108.202:123 0.0.0.0:* udp 0 0 127.0.0.1:123 0.0.0.0:* udp 0 0 0.0.0.0:123 0.0.0.0:* udp 0 0 0.0.0.0:514 0.0.0.0:* udp 0 0 fe80::250:56ff:feaf:583c:123 :::* udp 0 0 ::1:123 :::* udp 0 0 :::123 :::* udp 0 0 :::514 :::* Active UNIX domain sockets (only servers) Proto RefCnt Flags Type State I-Node Path unix 2 [ ACC ] STREAM LISTENING 9501 @/var/run/hald/dbus-Zia0T0GvDT unix 2 [ ACC ] STREAM LISTENING 9496 @/var/run/hald/dbus-JFlEl7KpQg unix 2 [ ACC ] STREAM LISTENING 6816 @/com/ubuntu/upstart unix 2 [ ACC ] STREAM LISTENING 9403 /var/run/dbus/system_bus_socket unix 2 [ ACC ] STREAM LISTENING 9466 /var/run/acpid.socket unix 2 [ ACC ] STREAM LISTENING 10050 public/cleanup unix 2 [ ACC ] STREAM LISTENING 10057 private/tlsmgr unix 2 [ ACC ] STREAM LISTENING 10061 private/rewrite unix 2 [ ACC ] STREAM LISTENING 10065 private/bounce unix 2 [ ACC ] STREAM LISTENING 10069 private/defer unix 2 [ ACC ] STREAM LISTENING 10073 private/trace unix 2 [ ACC ] STREAM LISTENING 10077 private/verify unix 2 [ ACC ] STREAM LISTENING 10081 public/flush unix 2 [ ACC ] STREAM LISTENING 10085 private/proxymap unix 2 [ ACC ] STREAM LISTENING 10089 private/proxywrite unix 2 [ ACC ] STREAM LISTENING 10093 private/smtp unix 2 [ ACC ] STREAM LISTENING 10097 private/relay unix 2 [ ACC ] STREAM LISTENING 10101 public/showq unix 2 [ ACC ] STREAM LISTENING 10105 private/error unix 2 [ ACC ] STREAM LISTENING 10109 private/retry unix 2 [ ACC ] STREAM LISTENING 10113 private/discard unix 2 [ ACC ] STREAM LISTENING 10117 private/local unix 2 [ ACC ] STREAM LISTENING 10121 private/virtual unix 2 [ ACC ] STREAM LISTENING 10125 private/lmtp unix 2 [ ACC ] STREAM LISTENING 10131 private/anvil unix 2 [ ACC ] STREAM LISTENING 10135 private/scache ############ MultiConfigPart END ############ MultiConfigPart /etc/hosts 127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4 ::1 localhost localhost.localdomain localhost6 localhost6.localdomain6 ############ MultiConfigPart END ############ MultiConfigPart /etc/passwd root:x:0:0:root:/root:/bin/bash bin:x:1:1:bin:/bin:/sbin/nologin daemon:x:2:2:daemon:/sbin:/sbin/nologin adm:x:3:4:adm:/var/adm:/sbin/nologin lp:x:4:7:lp:/var/spool/lpd:/sbin/nologin sync:x:5:0:sync:/sbin:/bin/sync shutdown:x:6:0:shutdown:/sbin:/sbin/shutdown halt:x:7:0:halt:/sbin:/sbin/halt mail:x:8:12:mail:/var/spool/mail:/sbin/nologin uucp:x:10:14:uucp:/var/spool/uucp:/sbin/nologin operator:x:11:0:operator:/root:/sbin/nologin games:x:12:100:games:/usr/games:/sbin/nologin gopher:x:13:30:gopher:/var/gopher:/sbin/nologin ftp:x:14:50:FTP User:/var/ftp:/sbin/nologin nobody:x:99:99:Nobody:/:/sbin/nologin dbus:x:81:81:System message bus:/:/sbin/nologin vcsa:x:69:69:virtual console memory owner:/dev:/sbin/nologin rpc:x:32:32:Rpcbind Daemon:/var/cache/rpcbind:/sbin/nologin abrt:x:173:173::/etc/abrt:/sbin/nologin haldaemon:x:68:68:HAL daemon:/:/sbin/nologin ntp:x:38:38::/etc/ntp:/sbin/nologin saslauth:x:499:76:"Saslauthd user":/var/empty/saslauth:/sbin/nologin postfix:x:89:89::/var/spool/postfix:/sbin/nologin rpcuser:x:29:29:RPC Service User:/var/lib/nfs:/sbin/nologin nfsnobody:x:65534:65534:Anonymous NFS User:/var/lib/nfs:/sbin/nologin apache:x:48:48:Apache:/var/www:/sbin/nologin sshd:x:74:74:Privilege-separated SSH:/var/empty/sshd:/sbin/nologin tcpdump:x:72:72::/:/sbin/nologin oprofile:x:16:16:Special user account to be used by OProfile:/home/oprofile:/sbin/nologin xmsadmin:x:777:777:XtremIO XMS-Admin:/xtremapp/xms:/usr/local/sbin/xmcli xinstall:x:0:0:XtremIO Install:/root:/xtremapp/bin/install_cli xmsupload:x:889:889:XMS Upload:/images:/sbin/nologin gnoctisvcnas01:x:890:890::/home/gnoctisvcnas01:/bin/bash scpar:x:891:891::/home/scpar:/bin/bash ############ MultiConfigPart END ############ MultiConfigPart /etc/ntp.conf # For more information about this file, see the man pages # ntp.conf(5), ntp_acc(5), ntp_auth(5), ntp_clock(5), ntp_misc(5), ntp_mon(5). driftfile /var/lib/ntp/drift # Permit time synchronization with our time source, but do not # permit the source to query or modify the service on this system. restrict default kod nomodify notrap nopeer noquery restrict -6 default kod nomodify notrap nopeer noquery # Permit all access over the loopback interface. This could # be tightened as well, but to do so would effect some of # the administrative functions. restrict 127.0.0.1 restrict -6 ::1 # Hosts on local network are less restricted. #restrict 192.168.1.0 mask 255.255.255.0 nomodify notrap # Use public servers from the pool.ntp.org project. # Please consider joining the pool (http://www.pool.ntp.org/join.html). #server 0.centos.pool.ntp.org #server 1.centos.pool.ntp.org #server 2.centos.pool.ntp.org #broadcast 192.168.1.255 autokey # broadcast server #broadcastclient # broadcast client #broadcast 224.0.1.1 autokey # multicast server #multicastclient 224.0.1.1 # multicast client #manycastserver 239.255.254.254 # manycast server #manycastclient 239.255.254.254 autokey # manycast client # Undisciplined Local Clock. This is a fake driver intended for backup # and when no outside source of synchronized time is available. server 127.127.1.0 # local clock fudge 127.127.1.0 stratum 10 # Enable public key cryptography. #crypto includefile /etc/ntp/crypto/pw # Key file containing the keys and key identifiers used when operating # with symmetric key cryptography. keys /etc/ntp/keys # Specify the key identifiers which are trusted. #trustedkey 4 8 42 # Specify the key identifier to use with the ntpdc utility. #requestkey 8 # Specify the key identifier to use with the ntpq utility. #controlkey 8 # Enable writing of statistics records. #statistics clockstats cryptostats loopstats peerstats includefile /etc/ntp/xms.ntp ############ MultiConfigPart END ############ MultiConfigPart /etc/resolv.conf ; generated by Xtremio's pm_easy_install domain apac.nsroot.net nameserver 192.193.215.65 nameserver 192.193.215.69 ############ MultiConfigPart END ############ MultiConfigPart /etc/snmp/snmpd.conf ############################################################################### # # snmpd.conf: # An example configuration file for configuring the ucd-snmp snmpd agent. # ############################################################################### # # This file is intended to only be as a starting point. Many more # configuration directives exist than are mentioned in this file. For # full details, see the snmpd.conf(5) manual page. # # All lines beginning with a '#' are comments and are intended for you # to read. All other lines are configuration commands for the agent. ############################################################################### # Access Control ############################################################################### # As shipped, the snmpd demon will only respond to queries on the # system mib group until this file is replaced or modified for # security purposes. Examples are shown below about how to increase the # level of access. # By far, the most common question I get about the agent is "why won't # it work?", when really it should be "how do I configure the agent to # allow me to access it?" # # By default, the agent responds to the "public" community for read # only access, if run out of the box without any configuration file in # place. The following examples show you other ways of configuring # the agent so that you can change the community names, and give # yourself write access to the mib tree as well. # # For more information, read the FAQ as well as the snmpd.conf(5) # manual page. #### # First, map the community name "public" into a "security name" # sec.name source community com2sec notConfigUser default public #### # Second, map the security name into a group name: # groupName securityModel securityName group notConfigGroup v1 notConfigUser group notConfigGroup v2c notConfigUser #### # Third, create a view for us to let the group have rights to: # Make at least snmpwalk -v 1 localhost -c public system fast again. # name incl/excl subtree mask(optional) view systemview included .1.3.6.1.2.1.1 view systemview included .1.3.6.1.2.1.25.1.1 #### # Finally, grant the group read-only access to the systemview view. # group context sec.model sec.level prefix read write notif access notConfigGroup "" any noauth exact systemview none none # ----------------------------------------------------------------------------- # Here is a commented out example configuration that allows less # restrictive access. # YOU SHOULD CHANGE THE "COMMUNITY" TOKEN BELOW TO A NEW KEYWORD ONLY # KNOWN AT YOUR SITE. YOU *MUST* CHANGE THE NETWORK TOKEN BELOW TO # SOMETHING REFLECTING YOUR LOCAL NETWORK ADDRESS SPACE. ## sec.name source community #com2sec local localhost COMMUNITY #com2sec mynetwork NETWORK/24 COMMUNITY ## group.name sec.model sec.name #group MyRWGroup any local #group MyROGroup any mynetwork # #group MyRWGroup any otherv3user #... ## incl/excl subtree mask #view all included .1 80 ## -or just the mib2 tree- #view mib2 included .iso.org.dod.internet.mgmt.mib-2 fc ## context sec.model sec.level prefix read write notif #access MyROGroup "" any noauth 0 all none none #access MyRWGroup "" any noauth 0 all all all ############################################################################### # Sample configuration to make net-snmpd RFC 1213. # Unfortunately v1 and v2c don't allow any user based authentification, so # opening up the default config is not an option from a security point. # # WARNING: If you uncomment the following lines you allow write access to your # snmpd daemon from any source! To avoid this use different names for your # community or split out the write access to a different community and # restrict it to your local network. # Also remember to comment the syslocation and syscontact parameters later as # otherwise they are still read only (see FAQ for net-snmp). # # First, map the community name "public" into a "security name" # sec.name source community #com2sec notConfigUser default public # Second, map the security name into a group name: # groupName securityModel securityName #group notConfigGroup v1 notConfigUser #group notConfigGroup v2c notConfigUser # Third, create a view for us to let the group have rights to: # Open up the whole tree for ro, make the RFC 1213 required ones rw. # name incl/excl subtree mask(optional) #view roview included .1 #view rwview included system.sysContact #view rwview included system.sysName #view rwview included system.sysLocation #view rwview included interfaces.ifTable.ifEntry.ifAdminStatus #view rwview included at.atTable.atEntry.atPhysAddress #view rwview included at.atTable.atEntry.atNetAddress #view rwview included ip.ipForwarding #view rwview included ip.ipDefaultTTL #view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteDest #view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteIfIndex #view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteMetric1 #view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteMetric2 #view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteMetric3 #view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteMetric4 #view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteType #view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteAge #view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteMask #view rwview included ip.ipRouteTable.ipRouteEntry.ipRouteMetric5 #view rwview included ip.ipNetToMediaTable.ipNetToMediaEntry.ipNetToMediaIfIndex #view rwview included ip.ipNetToMediaTable.ipNetToMediaEntry.ipNetToMediaPhysAddress #view rwview included ip.ipNetToMediaTable.ipNetToMediaEntry.ipNetToMediaNetAddress #view rwview included ip.ipNetToMediaTable.ipNetToMediaEntry.ipNetToMediaType #view rwview included tcp.tcpConnTable.tcpConnEntry.tcpConnState #view rwview included egp.egpNeighTable.egpNeighEntry.egpNeighEventTrigger #view rwview included snmp.snmpEnableAuthenTraps # Finally, grant the group read-only access to the systemview view. # group context sec.model sec.level prefix read write notif #access notConfigGroup "" any noauth exact roview rwview none ############################################################################### # System contact information # # It is also possible to set the sysContact and sysLocation system # variables through the snmpd.conf file: syslocation Unknown (edit /etc/snmp/snmpd.conf) syscontact Root (configure /etc/snmp/snmp.local.conf) # Example output of snmpwalk: # % snmpwalk -v 1 localhost -c public system # system.sysDescr.0 = "SunOS name sun4c" # system.sysObjectID.0 = OID: enterprises.ucdavis.ucdSnmpAgent.sunos4 # system.sysUpTime.0 = Timeticks: (595637548) 68 days, 22:32:55 # system.sysContact.0 = "Me " # system.sysName.0 = "name" # system.sysLocation.0 = "Right here, right now." # system.sysServices.0 = 72 ############################################################################### # Logging # # We do not want annoying "Connection from UDP: " messages in syslog. # If the following option is commented out, snmpd will print each incoming # connection, which can be useful for debugging. dontLogTCPWrappersConnects yes # ----------------------------------------------------------------------------- ############################################################################### # Process checks. # # The following are examples of how to use the agent to check for # processes running on the host. The syntax looks something like: # # proc NAME [MAX=0] [MIN=0] # # NAME: the name of the process to check for. It must match # exactly (ie, http will not find httpd processes). # MAX: the maximum number allowed to be running. Defaults to 0. # MIN: the minimum number to be running. Defaults to 0. # # Examples (commented out by default): # # Make sure mountd is running #proc mountd # Make sure there are no more than 4 ntalkds running, but 0 is ok too. #proc ntalkd 4 # Make sure at least one sendmail, but less than or equal to 10 are running. #proc sendmail 10 1 # A snmpwalk of the process mib tree would look something like this: # # % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.2 # enterprises.ucdavis.procTable.prEntry.prIndex.1 = 1 # enterprises.ucdavis.procTable.prEntry.prIndex.2 = 2 # enterprises.ucdavis.procTable.prEntry.prIndex.3 = 3 # enterprises.ucdavis.procTable.prEntry.prNames.1 = "mountd" # enterprises.ucdavis.procTable.prEntry.prNames.2 = "ntalkd" # enterprises.ucdavis.procTable.prEntry.prNames.3 = "sendmail" # enterprises.ucdavis.procTable.prEntry.prMin.1 = 0 # enterprises.ucdavis.procTable.prEntry.prMin.2 = 0 # enterprises.ucdavis.procTable.prEntry.prMin.3 = 1 # enterprises.ucdavis.procTable.prEntry.prMax.1 = 0 # enterprises.ucdavis.procTable.prEntry.prMax.2 = 4 # enterprises.ucdavis.procTable.prEntry.prMax.3 = 10 # enterprises.ucdavis.procTable.prEntry.prCount.1 = 0 # enterprises.ucdavis.procTable.prEntry.prCount.2 = 0 # enterprises.ucdavis.procTable.prEntry.prCount.3 = 1 # enterprises.ucdavis.procTable.prEntry.prErrorFlag.1 = 1 # enterprises.ucdavis.procTable.prEntry.prErrorFlag.2 = 0 # enterprises.ucdavis.procTable.prEntry.prErrorFlag.3 = 0 # enterprises.ucdavis.procTable.prEntry.prErrMessage.1 = "No mountd process running." # enterprises.ucdavis.procTable.prEntry.prErrMessage.2 = "" # enterprises.ucdavis.procTable.prEntry.prErrMessage.3 = "" # enterprises.ucdavis.procTable.prEntry.prErrFix.1 = 0 # enterprises.ucdavis.procTable.prEntry.prErrFix.2 = 0 # enterprises.ucdavis.procTable.prEntry.prErrFix.3 = 0 # # Note that the errorFlag for mountd is set to 1 because one is not # running (in this case an rpc.mountd is, but thats not good enough), # and the ErrMessage tells you what's wrong. The configuration # imposed in the snmpd.conf file is also shown. # # Special Case: When the min and max numbers are both 0, it assumes # you want a max of infinity and a min of 1. # # ----------------------------------------------------------------------------- ############################################################################### # Executables/scripts # # # You can also have programs run by the agent that return a single # line of output and an exit code. Here are two examples. # # exec NAME PROGRAM [ARGS ...] # # NAME: A generic name. The name must be unique for each exec statement. # PROGRAM: The program to run. Include the path! # ARGS: optional arguments to be passed to the program # a simple hello world #exec echotest /bin/echo hello world # Run a shell script containing: # # #!/bin/sh # echo hello world # echo hi there # exit 35 # # Note: this has been specifically commented out to prevent # accidental security holes due to someone else on your system writing # a /tmp/shtest before you do. Uncomment to use it. # #exec shelltest /bin/sh /tmp/shtest # Then, # % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.8 # enterprises.ucdavis.extTable.extEntry.extIndex.1 = 1 # enterprises.ucdavis.extTable.extEntry.extIndex.2 = 2 # enterprises.ucdavis.extTable.extEntry.extNames.1 = "echotest" # enterprises.ucdavis.extTable.extEntry.extNames.2 = "shelltest" # enterprises.ucdavis.extTable.extEntry.extCommand.1 = "/bin/echo hello world" # enterprises.ucdavis.extTable.extEntry.extCommand.2 = "/bin/sh /tmp/shtest" # enterprises.ucdavis.extTable.extEntry.extResult.1 = 0 # enterprises.ucdavis.extTable.extEntry.extResult.2 = 35 # enterprises.ucdavis.extTable.extEntry.extOutput.1 = "hello world." # enterprises.ucdavis.extTable.extEntry.extOutput.2 = "hello world." # enterprises.ucdavis.extTable.extEntry.extErrFix.1 = 0 # enterprises.ucdavis.extTable.extEntry.extErrFix.2 = 0 # Note that the second line of the /tmp/shtest shell script is cut # off. Also note that the exit status of 35 was returned. # ----------------------------------------------------------------------------- ############################################################################### # disk checks # # The agent can check the amount of available disk space, and make # sure it is above a set limit. # disk PATH [MIN=100000] # # PATH: mount path to the disk in question. # MIN: Disks with space below this value will have the Mib's errorFlag set. # Default value = 100000. # Check the / partition and make sure it contains at least 10 megs. #disk / 10000 # % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.9 # enterprises.ucdavis.diskTable.dskEntry.diskIndex.1 = 0 # enterprises.ucdavis.diskTable.dskEntry.diskPath.1 = "/" Hex: 2F # enterprises.ucdavis.diskTable.dskEntry.diskDevice.1 = "/dev/dsk/c201d6s0" # enterprises.ucdavis.diskTable.dskEntry.diskMinimum.1 = 10000 # enterprises.ucdavis.diskTable.dskEntry.diskTotal.1 = 837130 # enterprises.ucdavis.diskTable.dskEntry.diskAvail.1 = 316325 # enterprises.ucdavis.diskTable.dskEntry.diskUsed.1 = 437092 # enterprises.ucdavis.diskTable.dskEntry.diskPercent.1 = 58 # enterprises.ucdavis.diskTable.dskEntry.diskErrorFlag.1 = 0 # enterprises.ucdavis.diskTable.dskEntry.diskErrorMsg.1 = "" # ----------------------------------------------------------------------------- ############################################################################### # load average checks # # load [1MAX=12.0] [5MAX=12.0] [15MAX=12.0] # # 1MAX: If the 1 minute load average is above this limit at query # time, the errorFlag will be set. # 5MAX: Similar, but for 5 min average. # 15MAX: Similar, but for 15 min average. # Check for loads: #load 12 14 14 # % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.10 # enterprises.ucdavis.loadTable.laEntry.loadaveIndex.1 = 1 # enterprises.ucdavis.loadTable.laEntry.loadaveIndex.2 = 2 # enterprises.ucdavis.loadTable.laEntry.loadaveIndex.3 = 3 # enterprises.ucdavis.loadTable.laEntry.loadaveNames.1 = "Load-1" # enterprises.ucdavis.loadTable.laEntry.loadaveNames.2 = "Load-5" # enterprises.ucdavis.loadTable.laEntry.loadaveNames.3 = "Load-15" # enterprises.ucdavis.loadTable.laEntry.loadaveLoad.1 = "0.49" Hex: 30 2E 34 39 # enterprises.ucdavis.loadTable.laEntry.loadaveLoad.2 = "0.31" Hex: 30 2E 33 31 # enterprises.ucdavis.loadTable.laEntry.loadaveLoad.3 = "0.26" Hex: 30 2E 32 36 # enterprises.ucdavis.loadTable.laEntry.loadaveConfig.1 = "12.00" # enterprises.ucdavis.loadTable.laEntry.loadaveConfig.2 = "14.00" # enterprises.ucdavis.loadTable.laEntry.loadaveConfig.3 = "14.00" # enterprises.ucdavis.loadTable.laEntry.loadaveErrorFlag.1 = 0 # enterprises.ucdavis.loadTable.laEntry.loadaveErrorFlag.2 = 0 # enterprises.ucdavis.loadTable.laEntry.loadaveErrorFlag.3 = 0 # enterprises.ucdavis.loadTable.laEntry.loadaveErrMessage.1 = "" # enterprises.ucdavis.loadTable.laEntry.loadaveErrMessage.2 = "" # enterprises.ucdavis.loadTable.laEntry.loadaveErrMessage.3 = "" # ----------------------------------------------------------------------------- ############################################################################### # Extensible sections. # # This alleviates the multiple line output problem found in the # previous executable mib by placing each mib in its own mib table: # Run a shell script containing: # # #!/bin/sh # echo hello world # echo hi there # exit 35 # # Note: this has been specifically commented out to prevent # accidental security holes due to someone else on your system writing # a /tmp/shtest before you do. Uncomment to use it. # # exec .1.3.6.1.4.1.2021.50 shelltest /bin/sh /tmp/shtest # % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.50 # enterprises.ucdavis.50.1.1 = 1 # enterprises.ucdavis.50.2.1 = "shelltest" # enterprises.ucdavis.50.3.1 = "/bin/sh /tmp/shtest" # enterprises.ucdavis.50.100.1 = 35 # enterprises.ucdavis.50.101.1 = "hello world." # enterprises.ucdavis.50.101.2 = "hi there." # enterprises.ucdavis.50.102.1 = 0 # Now the Output has grown to two lines, and we can see the 'hi # there.' output as the second line from our shell script. # # Note that you must alter the mib.txt file to be correct if you want # the .50.* outputs above to change to reasonable text descriptions. # Other ideas: # # exec .1.3.6.1.4.1.2021.51 ps /bin/ps # exec .1.3.6.1.4.1.2021.52 top /usr/local/bin/top # exec .1.3.6.1.4.1.2021.53 mailq /usr/bin/mailq # ----------------------------------------------------------------------------- ############################################################################### # Pass through control. # # Usage: # pass MIBOID EXEC-COMMAND # # This will pass total control of the mib underneath the MIBOID # portion of the mib to the EXEC-COMMAND. # # Note: You'll have to change the path of the passtest script to your # source directory or install it in the given location. # # Example: (see the script for details) # (commented out here since it requires that you place the # script in the right location. (its not installed by default)) # pass .1.3.6.1.4.1.2021.255 /bin/sh /usr/local/local/passtest # % snmpwalk -v 1 localhost -c public .1.3.6.1.4.1.2021.255 # enterprises.ucdavis.255.1 = "life the universe and everything" # enterprises.ucdavis.255.2.1 = 42 # enterprises.ucdavis.255.2.2 = OID: 42.42.42 # enterprises.ucdavis.255.3 = Timeticks: (363136200) 42 days, 0:42:42 # enterprises.ucdavis.255.4 = IpAddress: 127.0.0.1 # enterprises.ucdavis.255.5 = 42 # enterprises.ucdavis.255.6 = Gauge: 42 # # % snmpget -v 1 localhost public .1.3.6.1.4.1.2021.255.5 # enterprises.ucdavis.255.5 = 42 # # % snmpset -v 1 localhost public .1.3.6.1.4.1.2021.255.1 s "New string" # enterprises.ucdavis.255.1 = "New string" # # For specific usage information, see the man/snmpd.conf.5 manual page # as well as the local/passtest script used in the above example. ############################################################################### # Further Information # # See the snmpd.conf manual page, and the output of "snmpd -H". ############ MultiConfigPart END ############ MultiConfigPart show-bbus Name Index Serial-Number Power-Feed State Connectivity-State Input Battery-Charge BBU-Load Voltage FW-Version Part-Number Brick-Name Index Cluster-Name Index X1-BBU 1 G299F30227 feed_a healthy connected on 100 21 219 02.08.0016 078-000-122-00 X1 1 hkgctisvxms8005 1 X2-BBU 2 G299F14218 feed_b healthy connected on 100 24 216 02.08.0016 078-000-122-00 X1 1 hkgctisvxms8005 1 ############ MultiConfigPart END ############ MultiConfigPart show-bricks Brick-Name Index Cluster-Name Index State X1 1 hkgctisvxms8005 1 in_sys ############ MultiConfigPart END ############ MultiConfigPart show-clusters Cluster-Name Index State Conn-State Num-of-Vols Vol-Size UD-SSD-Space Logical-Space-In-Use UD-SSD-Space-In-Use Total-Writes Total-Reads Stop-Reason Size-and-Capacity hkgctisvxms8005 1 active connected 25 58.594T 7.587T 21.087T 1.561T 296.282T 123.621T none 1X10TB ############ MultiConfigPart END ############ MultiConfigPart show-clusters-info Cluster-Name Index State Conn-State Activation-Time Start-Time SW-Version PSNT Encryption-Mode Encryption-Supported Mode-Switch-Status Compression-Mode SSH-Firewall-Mode hkgctisvxms8005 1 active connected Wed Oct 29 14:24:33 2014 Sun May 17 12:56:14 2015 3.0.1-11 CKM00142100388 disabled No none enabled locked ############ MultiConfigPart END ############ MultiConfigPart show-clusters-data-protection-properties Cluster-Name Index Min-SSDs-Per-Healthy-DPG Max-SSDs-Per-DPG Max-UD-Allowed Min-UD-Guaranteed hkgctisvxms8005 1 20 27 20 20 ############ MultiConfigPart END ############ MultiConfigPart show-clusters-parameters Cluster-Name Index iSCSI-TCP-Port Obfuscate Debug Info DebugInfo Creation Timeout hkgctisvxms8005 1 3260 disabled normal ############ MultiConfigPart END ############ MultiConfigPart show-clusters-savings Cluster-Name Index Data-Reduction-Ratio Thin-Provisioning-Ratio Dedup-Ratio Compression Factor hkgctisvxms8005 1 13.9:1 0.360 5.3:1 2.6:1 ############ MultiConfigPart END ############ MultiConfigPart show-clusters-upgrade Cluster-Name Index State Upgrade-State Start-Time Activation-Time hkgctisvxms8005 1 active fw_upgrade_succeeded Sun May 17 12:56:14 2015 Wed Oct 29 14:24:33 2014 Storage-Controller-Name Index Mgr-Addr SW-Version SW-Build OS-Version Upgrade-State FW-State Upgrade-Failures X1-SC1 1 10.107.242.183 3.0.1 11 Xtremio OS release 3.0.1-9.2 no_upgrade_done no_error X1-SC2 2 10.107.242.185 3.0.1 11 Xtremio OS release 3.0.1-9.2 no_upgrade_done no_error ############ MultiConfigPart END ############ MultiConfigPart show-daes Name Index Serial-Number State FW-Version Part-Number Brick-Name Index Cluster-Name Index X1-DAE 1 CKM00142100182 healthy 151 100-562-964 X1 1 hkgctisvxms8005 1 ############ MultiConfigPart END ############ MultiConfigPart show-daes-controllers Name Index Serial-Number State Index-In-DAE Location FW-Version Part-Number DAE-Name DAE-Index Brick-Name Index Cluster-Name Index X1-DAE-LCC-A 1 JWXEL141101994 healthy 1 bottom 151 303-104-000E X1-DAE 1 X1 1 hkgctisvxms8005 1 X1-DAE-LCC-B 2 JWXEL141101272 healthy 2 top 151 303-104-000E X1-DAE 1 X1 1 hkgctisvxms8005 1 ############ MultiConfigPart END ############ MultiConfigPart show-daes-psus Name Index Serial-Number Location-Index Power-Feed State Input Location HW-Revision Part-Number DAE-Name DAE-Index Brick-Name Index Cluster-Name Index X1-DAE-PSU1 1 AC7B0131501100 1 feed_b healthy on right 2a10 071-000-541 X1-DAE 1 X1 1 hkgctisvxms8005 1 X1-DAE-PSU2 2 AC797113507566 2 feed_a healthy on left 2a10 071-000-541 X1-DAE 1 X1 1 hkgctisvxms8005 1 ############ MultiConfigPart END ############ MultiConfigPart show-data-protection-groups Name Index State Useful-SSD-Space UD-SSD-Space UD-SSD-Space-In-Use Rebuild-Progress Preparation-Progress Rebalance-Progress Rebuild-Prevention Brick-Name Index Cluster-Name Index X1-DPG 1 normal 9.095T 7.587T 1.561T 0 0 0 none X1 1 hkgctisvxms8005 1 ############ MultiConfigPart END ############ MultiConfigPart show-debug-info Name Index Cluster-Name Index Debug-Level Creation-Start-Time Create-Time Output-Url 1 hkgctisvxms8005 1 medium Sun May 17 14:06:01 2015 Sun May 17 14:14:53 2015 https://163.36.108.202/xtremapp/DebugInfo/hkgctisvxms8005_2015_05_17_1406.tar.gz ############ MultiConfigPart END ############ MultiConfigPart show-discovered-initiators-connectivity Discovered Initiator List: Port-Type Port-Address Num-Of-Conn-Targets ############ MultiConfigPart END ############ MultiConfigPart show-email-notifier Enabled: True Transport: smtp Sender: usnassupport@citi.com Recipients: xio.call.home@emc.com,mrstorageoperationsappc@citi.com Proxy-Address: Proxy-Port: Proxy-User: Mail-Relay-Address: imbhub-ru36.nam.nsroot.net Mail-User: Company-Name: Citigroup -HK -hkgctisvxms8005 Contact-Details: APPC MR Storage Operations ############ MultiConfigPart END ############ MultiConfigPart show-ig-folders Name Index Parent-Folder-Name Index Num-of-IGs / 1 1 /APCHKATPADSKAJ 2 / 1 1 ############ MultiConfigPart END ############ MultiConfigPart show-infiniband-switches Name Index Serial-Number Index-In-Cluster State FW-Version Part-Number Cluster-Name Index ############ MultiConfigPart END ############ MultiConfigPart show-infiniband-switches-ports Port-Index Peer-Type Port-In-Peer-Index Link-Rate-In-Gbps Port-State IBSwitch-Name IBSwitch-Index Cluster-Name Index ############ MultiConfigPart END ############ MultiConfigPart show-initiators Initiator-Name Index Port-Type Port-Address IG-Name Index Parent-Folder-Name Index Certainty-State Chap-Authentication-Initiator-User-Name Chap-Discovery-Initiator-User-Name Chap-Authentication-Cluster-User-Name Chap-Discovery-Cluster-User-Name APCHKAVHDAJ01 1 iscsi iqn.1998-01.com.vmware:APCHKAVHDAJ01-1d37607e APCHKATPADSKAJ 1 /APCHKATPADSKAJ 2 ok APCHKAVHDAJ02 2 iscsi iqn.1998-01.com.vmware:APCHKAVHDAJ02-0a63ce94 APCHKATPADSKAJ 1 /APCHKATPADSKAJ 2 ok APCHKAVHDAJ03 3 iscsi iqn.1998-01.com.vmware:APCHKAVHDAJ03-2d9ebee9 APCHKATPADSKAJ 1 /APCHKATPADSKAJ 2 ok APCHKAVHDAJ04 14 iscsi iqn.1998-01.com.vmware:APCHKAVHDAJ04-6c97efd8 APCHKATPADSKAJ 1 /APCHKATPADSKAJ 2 ok APCHKAVHDAJ05 4 iscsi iqn.1998-01.com.vmware:APCHKAVHDAJ05-77c810d3 APCHKATPADSKAJ 1 /APCHKATPADSKAJ 2 ok APCHKAVHDAJ06 5 iscsi iqn.1998-01.com.vmware:APCHKAVHDAJ06-774cea4c APCHKATPADSKAJ 1 /APCHKATPADSKAJ 2 ok APCHKAVHDAJ07 6 iscsi iqn.1998-01.com.vmware:APCHKAVHDAJ07-0a8d9a35 APCHKATPADSKAJ 1 /APCHKATPADSKAJ 2 ok APCHKAVHDAJ08 7 iscsi iqn.1998-01.com.vmware:APCHKAVHDAJ08-11de124d APCHKATPADSKAJ 1 /APCHKATPADSKAJ 2 ok APCHKAVHDAJ09 8 iscsi iqn.1998-01.com.vmware:APCHKAVHDAJ09-32d59bf9 APCHKATPADSKAJ 1 /APCHKATPADSKAJ 2 ok APCHKAVHDAJ10 9 iscsi iqn.1998-01.com.vmware:APCHKAVHDAJ10-2e124102 APCHKATPADSKAJ 1 /APCHKATPADSKAJ 2 ok APCHKAVHDAJ11 10 iscsi iqn.1998-01.com.vmware:APCHKAVHDAJ11-6ee6e829 APCHKATPADSKAJ 1 /APCHKATPADSKAJ 2 ok APCHKAVHDAJ12 11 iscsi iqn.1998-01.com.vmware:APCHKAVHDAJ12-31060e5e APCHKATPADSKAJ 1 /APCHKATPADSKAJ 2 ok APCHKAVHDAJ13 12 iscsi iqn.1998-01.com.vmware:APCHKAVHDAJ13-285c1de9 APCHKATPADSKAJ 1 /APCHKATPADSKAJ 2 ok APCHKAVHDAJ14 13 iscsi iqn.1998-01.com.vmware:APCHKAVHDAJ14-00ced873 APCHKATPADSKAJ 1 /APCHKATPADSKAJ 2 ok ############ MultiConfigPart END ############ MultiConfigPart show-initiator-groups IG-Name Index Parent-Folder-Name Index Certainty-State APCHKATPADSKAJ 1 /APCHKATPADSKAJ 2 ok ############ MultiConfigPart END ############ MultiConfigPart show-initiators-connectivity Existing Initiator List: Name Index Port-Type Port-Address Num-Of-Conn-Targets APCHKAVHDAJ01 1 iscsi iqn.1998-01.com.vmware:APCHKAVHDAJ01-1d37607e 4 APCHKAVHDAJ02 2 iscsi iqn.1998-01.com.vmware:APCHKAVHDAJ02-0a63ce94 4 APCHKAVHDAJ03 3 iscsi iqn.1998-01.com.vmware:APCHKAVHDAJ03-2d9ebee9 4 APCHKAVHDAJ04 14 iscsi iqn.1998-01.com.vmware:APCHKAVHDAJ04-6c97efd8 4 APCHKAVHDAJ05 4 iscsi iqn.1998-01.com.vmware:APCHKAVHDAJ05-77c810d3 4 APCHKAVHDAJ06 5 iscsi iqn.1998-01.com.vmware:APCHKAVHDAJ06-774cea4c 4 APCHKAVHDAJ07 6 iscsi iqn.1998-01.com.vmware:APCHKAVHDAJ07-0a8d9a35 4 APCHKAVHDAJ08 7 iscsi iqn.1998-01.com.vmware:APCHKAVHDAJ08-11de124d 4 APCHKAVHDAJ09 8 iscsi iqn.1998-01.com.vmware:APCHKAVHDAJ09-32d59bf9 4 APCHKAVHDAJ10 9 iscsi iqn.1998-01.com.vmware:APCHKAVHDAJ10-2e124102 4 APCHKAVHDAJ11 10 iscsi iqn.1998-01.com.vmware:APCHKAVHDAJ11-6ee6e829 4 APCHKAVHDAJ12 11 iscsi iqn.1998-01.com.vmware:APCHKAVHDAJ12-31060e5e 4 APCHKAVHDAJ13 12 iscsi iqn.1998-01.com.vmware:APCHKAVHDAJ13-285c1de9 4 APCHKAVHDAJ14 13 iscsi iqn.1998-01.com.vmware:APCHKAVHDAJ14-00ced873 4 ############ MultiConfigPart END ############ MultiConfigPart show-iscsi-portals Target-Name Index IP-Address Port-Address Port VLAN Certainty-State X1-SC1-iscsi1 5 10.217.241.171/24 iqn.2008-05.com.xtremio:001e679f2ee6 3260 0 ok X1-SC1-iscsi2 6 10.217.245.171/24 iqn.2008-05.com.xtremio:001e679f2ee7 3260 0 ok X1-SC2-iscsi1 15 10.217.241.172/24 iqn.2008-05.com.xtremio:001e679f321a 3260 0 ok X1-SC2-iscsi2 16 10.217.245.172/24 iqn.2008-05.com.xtremio:001e679f321b 3260 0 ok ############ MultiConfigPart END ############ MultiConfigPart show-iscsi-routes Name Index Destination-Subnet Gateway Certainty-State ############ MultiConfigPart END ############ MultiConfigPart show-local-disks Name Index Serial-Number Location-Index State Enabled-State FW-Version Part-Number UID Disk-Type Disk-Expected-Type Disk-Purpose Storage-Controller-Name Index Brick-Name Index Cluster-Name Index X1-SC1-LocalDisk1 1 XXVY1JDA 1 healthy enabled C337 105-000-293-00 wwn_[5000cca01334d200]_serial_[XXVY1JDA ] ssd ssd journal_and_boot_disk X1-SC1 1 X1 1 hkgctisvxms8005 1 X1-SC1-LocalDisk2 2 KXG12NDJ 2 healthy enabled C600 105-000-228 wwn_[5000cca05701f964]_serial_[KXG12NDJ ] hdd hdd trace_disk X1-SC1 1 X1 1 hkgctisvxms8005 1 X1-SC1-LocalDisk5 3 XXVY1EAA 5 healthy enabled C337 105-000-293-00 wwn_[5000cca01334d084]_serial_[XXVY1EAA ] ssd ssd journal_disk X1-SC1 1 X1 1 hkgctisvxms8005 1 X1-SC1-LocalDisk6 4 KXG0SN2J 6 healthy enabled C600 105-000-228 wwn_[5000cca057016314]_serial_[KXG0SN2J ] hdd hdd trace_disk X1-SC1 1 X1 1 hkgctisvxms8005 1 X1-SC2-LocalDisk1 5 XXVY1Y1A 1 healthy enabled C337 105-000-293-00 wwn_[5000cca01334d820]_serial_[XXVY1Y1A ] ssd ssd journal_and_boot_disk X1-SC2 2 X1 1 hkgctisvxms8005 1 X1-SC2-LocalDisk2 6 KVK6Z6GJ 2 healthy enabled C600 105-000-228 wwn_[5000cca043b5c88c]_serial_[KVK6Z6GJ ] hdd hdd trace_disk X1-SC2 2 X1 1 hkgctisvxms8005 1 X1-SC2-LocalDisk5 7 XXVY0VRA 5 healthy enabled C337 105-000-293-00 wwn_[5000cca01334c7fc]_serial_[XXVY0VRA ] ssd ssd journal_disk X1-SC2 2 X1 1 hkgctisvxms8005 1 X1-SC2-LocalDisk6 8 KVK1RYWJ 6 healthy enabled C600 105-000-228 wwn_[5000cca043ac4458]_serial_[KVK1RYWJ ] hdd hdd trace_disk X1-SC2 2 X1 1 hkgctisvxms8005 1 ############ MultiConfigPart END ############ MultiConfigPart show-lun-mappings Volume-Name Index IG-Name Index TG-Name Index LUN Mapping-Index Certainty-State vm_apchkatpadskaj_ds01 1 APCHKATPADSKAJ 1 Default 1 0 7 ok vm_apchkatpadskaj_ds02 2 APCHKATPADSKAJ 1 Default 1 1 9 ok vm_apchkatpadskaj_ds03 3 APCHKATPADSKAJ 1 Default 1 2 8 ok vm_apchkatpadskaj_ds04 4 APCHKATPADSKAJ 1 Default 1 3 11 ok vm_apchkatpadskaj_ds05 5 APCHKATPADSKAJ 1 Default 1 4 10 ok vm_apchkatpadskaj_ds06 6 APCHKATPADSKAJ 1 Default 1 5 13 ok vm_apchkatpadskaj_ds07 7 APCHKATPADSKAJ 1 Default 1 6 12 ok vm_apchkatpadskaj_ds08 8 APCHKATPADSKAJ 1 Default 1 7 15 ok vm_apchkatpadskaj_ds09 9 APCHKATPADSKAJ 1 Default 1 8 14 ok vm_apchkatpadskaj_ds10 10 APCHKATPADSKAJ 1 Default 1 9 2 ok vm_apchkatpadskaj_ds11 11 APCHKATPADSKAJ 1 Default 1 10 1 ok vm_apchkatpadskaj_ds12 12 APCHKATPADSKAJ 1 Default 1 11 4 ok vm_apchkatpadskaj_ds13 13 APCHKATPADSKAJ 1 Default 1 12 3 ok vm_apchkatpadskaj_ds14 14 APCHKATPADSKAJ 1 Default 1 13 6 ok vm_apchkatpadskaj_ds15 15 APCHKATPADSKAJ 1 Default 1 14 5 ok vm_apchkatpadskaj_ds16 16 APCHKATPADSKAJ 1 Default 1 15 16 ok vm_apchkatpadskaj_ds17 17 APCHKATPADSKAJ 1 Default 1 16 17 ok vm_apchkatpadskaj_ds18 18 APCHKATPADSKAJ 1 Default 1 17 18 ok vm_apchkatpadskaj_ds19 19 APCHKATPADSKAJ 1 Default 1 18 19 ok vm_apchkatpadskaj_ds20 20 APCHKATPADSKAJ 1 Default 1 19 20 ok vm_apchkatpadskaj_ds21 21 APCHKATPADSKAJ 1 Default 1 20 21 ok vm_apchkatpadskaj_ds22 22 APCHKATPADSKAJ 1 Default 1 21 22 ok vm_apchkatpadskaj_ds23 23 APCHKATPADSKAJ 1 Default 1 22 23 ok vm_apchkatpadskaj_ds24 24 APCHKATPADSKAJ 1 Default 1 23 24 ok vm_apchkatpadskaj_ds25 25 APCHKATPADSKAJ 1 Default 1 24 25 ok ############ MultiConfigPart END ############ MultiConfigPart show-remote-servers-status Server-Type Server-IP Server-Status DNS 192.193.215.65 Reachable DNS 192.193.215.69 Reachable Gateway 163.36.108.1 Reachable ############ MultiConfigPart END ############ MultiConfigPart show-server-name Unknown command: 'show-server-name'. Try 'help' ############ MultiConfigPart END ############ MultiConfigPart show-slots Cluster-Name Index Brick-Name Index Slot # State Health-State Error UID Product-Model SSD-Size hkgctisvxms8005 1 X1 1 0 resident_ssd healthy none wwn-0x5000cca02b0f741c HITACHI HUSMM814 CLAR400 372.529G hkgctisvxms8005 1 X1 1 1 resident_ssd healthy none wwn-0x5000cca02b0f0c38 HITACHI HUSMM814 CLAR400 372.529G hkgctisvxms8005 1 X1 1 2 resident_ssd healthy none wwn-0x5000cca02b0ef978 HITACHI HUSMM814 CLAR400 372.529G hkgctisvxms8005 1 X1 1 3 resident_ssd healthy none wwn-0x5000cca02b0f6fc4 HITACHI HUSMM814 CLAR400 372.529G hkgctisvxms8005 1 X1 1 4 resident_ssd healthy none wwn-0x5000cca02b0e5c88 HITACHI HUSMM814 CLAR400 372.529G hkgctisvxms8005 1 X1 1 5 resident_ssd healthy none wwn-0x5000cca02b0f4e84 HITACHI HUSMM814 CLAR400 372.529G hkgctisvxms8005 1 X1 1 6 resident_ssd healthy none wwn-0x5000cca02b0f4fe4 HITACHI HUSMM814 CLAR400 372.529G hkgctisvxms8005 1 X1 1 7 resident_ssd healthy none wwn-0x5000cca02b0f1140 HITACHI HUSMM814 CLAR400 372.529G hkgctisvxms8005 1 X1 1 8 resident_ssd healthy none wwn-0x5000cca02b0f33e0 HITACHI HUSMM814 CLAR400 372.529G hkgctisvxms8005 1 X1 1 9 resident_ssd healthy none wwn-0x5000cca02b0efab4 HITACHI HUSMM814 CLAR400 372.529G hkgctisvxms8005 1 X1 1 10 resident_ssd healthy none wwn-0x5000cca02b0f2494 HITACHI HUSMM814 CLAR400 372.529G hkgctisvxms8005 1 X1 1 11 resident_ssd healthy none wwn-0x5000cca02b0f12f0 HITACHI HUSMM814 CLAR400 372.529G hkgctisvxms8005 1 X1 1 12 resident_ssd healthy none wwn-0x5000cca02b0f24f4 HITACHI HUSMM814 CLAR400 372.529G hkgctisvxms8005 1 X1 1 13 resident_ssd healthy none wwn-0x5000cca02b0f73b4 HITACHI HUSMM814 CLAR400 372.529G hkgctisvxms8005 1 X1 1 14 resident_ssd healthy none wwn-0x5000cca02b0f1a14 HITACHI HUSMM814 CLAR400 372.529G hkgctisvxms8005 1 X1 1 15 resident_ssd healthy none wwn-0x5000cca02b0f6e94 HITACHI HUSMM814 CLAR400 372.529G hkgctisvxms8005 1 X1 1 16 resident_ssd healthy none wwn-0x5000cca02b0f4848 HITACHI HUSMM814 CLAR400 372.529G hkgctisvxms8005 1 X1 1 17 resident_ssd healthy none wwn-0x5000cca02b0d4444 HITACHI HUSMM814 CLAR400 372.529G hkgctisvxms8005 1 X1 1 18 resident_ssd healthy none wwn-0x5000cca02b0f5764 HITACHI HUSMM814 CLAR400 372.529G hkgctisvxms8005 1 X1 1 19 resident_ssd healthy none wwn-0x5000cca02b0f5790 HITACHI HUSMM814 CLAR400 372.529G hkgctisvxms8005 1 X1 1 20 resident_ssd healthy none wwn-0x5000cca02b0f1a98 HITACHI HUSMM814 CLAR400 372.529G hkgctisvxms8005 1 X1 1 21 resident_ssd healthy none wwn-0x5000cca02b0f11e4 HITACHI HUSMM814 CLAR400 372.529G hkgctisvxms8005 1 X1 1 22 resident_ssd healthy none wwn-0x5000cca02b0f7410 HITACHI HUSMM814 CLAR400 372.529G hkgctisvxms8005 1 X1 1 23 resident_ssd healthy none wwn-0x5000cca02b0ee4b4 HITACHI HUSMM814 CLAR400 372.529G hkgctisvxms8005 1 X1 1 24 resident_ssd healthy none wwn-0x5000cca02b0c9134 HITACHI HUSMM814 CLAR400 372.529G ############ MultiConfigPart END ############ MultiConfigPart show-snmp-notifier Enabled: True Recipients: tiamsoap1hku.apac.nsroot.net,apnetcool.apac.nsroot.net SNMP-Version: v1 Trap-Port: 162 Community: fe03h20 ############ MultiConfigPart END ############ MultiConfigPart show-ssds SSD-Name Index Brick-Name Index Slot # Product-Model FW-Version FW-State Part-Number SSD-Size DPG-Name Index State Position-State Endurance-Remaining-% Certainty-State SSD-Encryption-Status wwn-0x5000cca02b0f741c 1 X1 1 0 HITACHI HUSMM814 CLAR400 C1F0 no_error 005-050-673 372.529G X1-DPG 1 in_rg good 100 ok enc_unlocked wwn-0x5000cca02b0f0c38 2 X1 1 1 HITACHI HUSMM814 CLAR400 C1F0 no_error 005-050-673 372.529G X1-DPG 1 in_rg good 100 ok enc_unlocked wwn-0x5000cca02b0ef978 3 X1 1 2 HITACHI HUSMM814 CLAR400 C1F0 no_error 005-050-673 372.529G X1-DPG 1 in_rg good 100 ok enc_unlocked wwn-0x5000cca02b0f6fc4 4 X1 1 3 HITACHI HUSMM814 CLAR400 C1F0 no_error 005-050-673 372.529G X1-DPG 1 in_rg good 100 ok enc_unlocked wwn-0x5000cca02b0e5c88 5 X1 1 4 HITACHI HUSMM814 CLAR400 C1F0 no_error 005-050-673 372.529G X1-DPG 1 in_rg good 100 ok enc_unlocked wwn-0x5000cca02b0f4e84 6 X1 1 5 HITACHI HUSMM814 CLAR400 C1F0 no_error 005-050-673 372.529G X1-DPG 1 in_rg good 100 ok enc_unlocked wwn-0x5000cca02b0f4fe4 7 X1 1 6 HITACHI HUSMM814 CLAR400 C1F0 no_error 005-050-673 372.529G X1-DPG 1 in_rg good 100 ok enc_unlocked wwn-0x5000cca02b0f1140 8 X1 1 7 HITACHI HUSMM814 CLAR400 C1F0 no_error 005-050-673 372.529G X1-DPG 1 in_rg good 100 ok enc_unlocked wwn-0x5000cca02b0f33e0 9 X1 1 8 HITACHI HUSMM814 CLAR400 C1F0 no_error 005-050-673 372.529G X1-DPG 1 in_rg good 100 ok enc_unlocked wwn-0x5000cca02b0efab4 10 X1 1 9 HITACHI HUSMM814 CLAR400 C1F0 no_error 005-050-673 372.529G X1-DPG 1 in_rg good 100 ok enc_unlocked wwn-0x5000cca02b0f2494 11 X1 1 10 HITACHI HUSMM814 CLAR400 C1F0 no_error 005-050-673 372.529G X1-DPG 1 in_rg good 100 ok enc_unlocked wwn-0x5000cca02b0f12f0 12 X1 1 11 HITACHI HUSMM814 CLAR400 C1F0 no_error 005-050-673 372.529G X1-DPG 1 in_rg good 100 ok enc_unlocked wwn-0x5000cca02b0f24f4 13 X1 1 12 HITACHI HUSMM814 CLAR400 C1F0 no_error 005-050-673 372.529G X1-DPG 1 in_rg good 100 ok enc_unlocked wwn-0x5000cca02b0f73b4 14 X1 1 13 HITACHI HUSMM814 CLAR400 C1F0 no_error 005-050-673 372.529G X1-DPG 1 in_rg good 100 ok enc_unlocked wwn-0x5000cca02b0f1a14 15 X1 1 14 HITACHI HUSMM814 CLAR400 C1F0 no_error 005-050-673 372.529G X1-DPG 1 in_rg good 100 ok enc_unlocked wwn-0x5000cca02b0f6e94 16 X1 1 15 HITACHI HUSMM814 CLAR400 C1F0 no_error 005-050-673 372.529G X1-DPG 1 in_rg good 100 ok enc_unlocked wwn-0x5000cca02b0f4848 17 X1 1 16 HITACHI HUSMM814 CLAR400 C1F0 no_error 005-050-673 372.529G X1-DPG 1 in_rg good 100 ok enc_unlocked wwn-0x5000cca02b0d4444 18 X1 1 17 HITACHI HUSMM814 CLAR400 C1F0 no_error 005-050-673 372.529G X1-DPG 1 in_rg good 100 ok enc_unlocked wwn-0x5000cca02b0f5764 19 X1 1 18 HITACHI HUSMM814 CLAR400 C1F0 no_error 005-050-673 372.529G X1-DPG 1 in_rg good 100 ok enc_unlocked wwn-0x5000cca02b0f5790 20 X1 1 19 HITACHI HUSMM814 CLAR400 C1F0 no_error 005-050-673 372.529G X1-DPG 1 in_rg good 100 ok enc_unlocked wwn-0x5000cca02b0f1a98 21 X1 1 20 HITACHI HUSMM814 CLAR400 C1F0 no_error 005-050-673 372.529G X1-DPG 1 in_rg good 100 ok enc_unlocked wwn-0x5000cca02b0f11e4 22 X1 1 21 HITACHI HUSMM814 CLAR400 C1F0 no_error 005-050-673 372.529G X1-DPG 1 in_rg good 100 ok enc_unlocked wwn-0x5000cca02b0f7410 23 X1 1 22 HITACHI HUSMM814 CLAR400 C1F0 no_error 005-050-673 372.529G X1-DPG 1 in_rg good 100 ok enc_unlocked wwn-0x5000cca02b0ee4b4 24 X1 1 23 HITACHI HUSMM814 CLAR400 C1F0 no_error 005-050-673 372.529G X1-DPG 1 in_rg good 100 ok enc_unlocked wwn-0x5000cca02b0c9134 25 X1 1 24 HITACHI HUSMM814 CLAR400 C1F0 no_error 005-050-673 372.529G X1-DPG 1 in_rg good 100 ok enc_unlocked ############ MultiConfigPart END ############ MultiConfigPart show-storage-controllers Storage-Controller-Name Index Mgr-Addr IB-Addr-1 IB-Addr-2 IPMI-Addr Brick-Name Index Cluster-Name Index State Health-State Enabled-State Unorderly-Stop-Reason Conn-State IPMI-State Powered-State X1-SC1 1 10.107.242.183 169.254.0.1 169.254.0.2 10.107.242.184 X1 1 hkgctisvxms8005 1 healthy healthy enabled none connected unknown X1-SC2 2 10.107.242.185 169.254.0.17 169.254.0.18 10.107.242.186 X1 1 hkgctisvxms8005 1 healthy healthy enabled none connected unknown ############ MultiConfigPart END ############ MultiConfigPart show-storage-controllers-info Storage-Controller-Name Index Mgr-Addr Brick-Name Index Cluster-Name Index State Conn-State SW-Version SW-Build HW-Model OS-Version Serial-Number Part-Number X1-SC1 1 10.107.242.183 X1 1 hkgctisvxms8005 1 healthy connected 3.0.1 11 S2600GZ Xtremio OS release 3.0.1-9.2 FC6XI141100114 X1-SC2 2 10.107.242.185 X1 1 hkgctisvxms8005 1 healthy connected 3.0.1 11 S2600GZ Xtremio OS release 3.0.1-9.2 FC6XI141100021 ############ MultiConfigPart END ############ MultiConfigPart show-storage-controllers-psus Name Index Serial-Number Location-Index Power-Feed State Input Location HW-Revision Part-Number Storage-Controller-Name Index Brick-Name Index Cluster-Name Index X1-SC1-PSU-L 1 E98791D1341147582 1 port_1 healthy on left 04 105-000-244-01 X1-SC1 1 X1 1 hkgctisvxms8005 1 X1-SC1-PSU-R 2 E98791D1341147581 2 port_1 healthy on right 04 105-000-244-01 X1-SC1 1 X1 1 hkgctisvxms8005 1 X1-SC2-PSU-L 3 E98791D1349182409 1 port_2 healthy on left 04 105-000-244-01 X1-SC2 2 X1 1 hkgctisvxms8005 1 X1-SC2-PSU-R 4 E98791D1349182320 2 port_2 healthy on right 04 105-000-244-01 X1-SC2 2 X1 1 hkgctisvxms8005 1 ############ MultiConfigPart END ############ MultiConfigPart show-syr-notifier Enabled: True Frequency (hours): 24 ConnectEMC-Config: -----> ConnectionType: ESRS Gateway URL: https://163.36.253.128:443/incoming Site Name: Citigroup_HK-AT_OS PSNT: CKM00142100388 ConnectionStatus: OK ############ MultiConfigPart END ############ MultiConfigPart show-target-groups TG-Name Index Cluster-Name Index Default 1 hkgctisvxms8005 1 ############ MultiConfigPart END ############ MultiConfigPart show-targets Name Index Port-Type Port-Address Port-State Health-Level Storage-Controller-Name Index TG-Name Index MTU Jumbo-Frames Certainty-State X1-SC1-fc1 1 fc 21:00:00:24:ff:57:d8:f4 down level_1_clear X1-SC1 1 Default 1 1500 False ok X1-SC1-fc2 2 fc 21:00:00:24:ff:57:d8:f5 down level_1_clear X1-SC1 1 Default 1 1500 False ok X1-SC1-iscsi1 5 iscsi iqn.2008-05.com.xtremio:001e679f2ee6 up level_1_clear X1-SC1 1 Default 1 8800 True ok X1-SC1-iscsi2 6 iscsi iqn.2008-05.com.xtremio:001e679f2ee7 up level_1_clear X1-SC1 1 Default 1 8800 True ok X1-SC2-fc1 11 fc 21:00:00:24:ff:57:e2:0a down level_1_clear X1-SC2 2 Default 1 1500 False ok X1-SC2-fc2 12 fc 21:00:00:24:ff:57:e2:0b down level_1_clear X1-SC2 2 Default 1 1500 False ok X1-SC2-iscsi1 15 iscsi iqn.2008-05.com.xtremio:001e679f321a up level_1_clear X1-SC2 2 Default 1 8800 True ok X1-SC2-iscsi2 16 iscsi iqn.2008-05.com.xtremio:001e679f321b up level_1_clear X1-SC2 2 Default 1 8800 True ok ############ MultiConfigPart END ############ MultiConfigPart show-user-accounts Name Index Role External-Account gnoctisvcnas01 4 read_only False ############ MultiConfigPart END ############ MultiConfigPart show-volumes Volume-Name Index Vol-Size LB-Size VSG-Space-In-Use Offset Ancestor-Name Index VSG-Index Cluster-Name Index Parent-Folder-Name Index Small-IO-Alerts Unaligned-IO-Alerts VAAI-TP-Alerts Total-Writes Total-Reads Certainty-State vm_apchkatpadskaj_ds01 1 2.344T 512 1.110T 0 1 hkgctisvxms8005 1 /VDI-Volumes 2 disabled disabled disabled 13.259T 13.345T ok vm_apchkatpadskaj_ds02 2 2.344T 512 1.162T 0 2 hkgctisvxms8005 1 /VDI-Volumes 2 disabled disabled disabled 14.298T 6.221T ok vm_apchkatpadskaj_ds03 3 2.344T 512 1.127T 0 3 hkgctisvxms8005 1 /VDI-Volumes 2 disabled disabled disabled 13.742T 5.756T ok vm_apchkatpadskaj_ds04 4 2.344T 512 1.097T 0 4 hkgctisvxms8005 1 /VDI-Volumes 2 disabled disabled disabled 13.454T 5.610T ok vm_apchkatpadskaj_ds05 5 2.344T 512 1.094T 0 5 hkgctisvxms8005 1 /VDI-Volumes 2 disabled disabled disabled 13.325T 5.571T ok vm_apchkatpadskaj_ds06 6 2.344T 512 1.104T 0 6 hkgctisvxms8005 1 /VDI-Volumes 2 disabled disabled disabled 13.762T 5.658T ok vm_apchkatpadskaj_ds07 7 2.344T 512 1.087T 0 7 hkgctisvxms8005 1 /VDI-Volumes 2 disabled disabled disabled 50.518T 13.149T ok vm_apchkatpadskaj_ds08 8 2.344T 512 1.121T 0 8 hkgctisvxms8005 1 /VDI-Volumes 2 disabled disabled disabled 13.834T 5.818T ok vm_apchkatpadskaj_ds09 9 2.344T 512 1.126T 0 9 hkgctisvxms8005 1 /VDI-Volumes 2 disabled disabled disabled 13.799T 5.791T ok vm_apchkatpadskaj_ds10 10 2.344T 512 1.127T 0 10 hkgctisvxms8005 1 /VDI-Volumes 2 disabled disabled disabled 13.782T 6.226T ok vm_apchkatpadskaj_ds11 11 2.344T 512 1.114T 0 11 hkgctisvxms8005 1 /VDI-Volumes 2 disabled disabled disabled 13.666T 5.645T ok vm_apchkatpadskaj_ds12 12 2.344T 512 1.122T 0 12 hkgctisvxms8005 1 /VDI-Volumes 2 disabled disabled disabled 13.887T 5.760T ok vm_apchkatpadskaj_ds13 13 2.344T 512 1.112T 0 13 hkgctisvxms8005 1 /VDI-Volumes 2 disabled disabled disabled 13.922T 5.892T ok vm_apchkatpadskaj_ds14 14 2.344T 512 1.059T 0 14 hkgctisvxms8005 1 /VDI-Volumes 2 disabled disabled disabled 13.106T 5.404T ok vm_apchkatpadskaj_ds15 15 2.344T 512 1.145T 0 15 hkgctisvxms8005 1 /VDI-Volumes 2 disabled disabled disabled 14.016T 5.691T ok vm_apchkatpadskaj_ds16 16 2.344T 512 1.060T 0 16 hkgctisvxms8005 1 / 1 disabled disabled disabled 13.102T 5.240T ok vm_apchkatpadskaj_ds17 17 2.344T 512 1.106T 0 17 hkgctisvxms8005 1 / 1 disabled disabled disabled 13.575T 5.500T ok vm_apchkatpadskaj_ds18 18 2.344T 512 1.135T 0 18 hkgctisvxms8005 1 / 1 disabled disabled disabled 13.819T 5.696T ok vm_apchkatpadskaj_ds19 19 2.344T 512 1.079T 0 19 hkgctisvxms8005 1 / 1 disabled disabled disabled 13.382T 5.529T ok vm_apchkatpadskaj_ds20 20 2.344T 512 19.383M 0 20 hkgctisvxms8005 1 / 1 disabled disabled disabled 59.968M 23.714G ok vm_apchkatpadskaj_ds21 21 2.344T 512 19.383M 0 21 hkgctisvxms8005 1 / 1 disabled disabled disabled 59.524M 22.612G ok vm_apchkatpadskaj_ds22 22 2.344T 512 19.383M 0 22 hkgctisvxms8005 1 / 1 disabled disabled disabled 58.942M 21.178G ok vm_apchkatpadskaj_ds23 23 2.344T 512 19.383M 0 23 hkgctisvxms8005 1 / 1 disabled disabled disabled 58.464M 19.978G ok vm_apchkatpadskaj_ds24 24 2.344T 512 19.742M 0 24 hkgctisvxms8005 1 / 1 disabled disabled disabled 47.030M 14.815G ok vm_apchkatpadskaj_ds25 25 2.344T 512 19.742M 0 25 hkgctisvxms8005 1 / 1 disabled disabled disabled 46.588M 13.686G ok ############ MultiConfigPart END ############ MultiConfigPart show-dns-servers *** XMS Completion Code: unauthorized_command ############ MultiConfigPart END ############ MultiConfigPart show-ldap-configs Index: 1 Bind DN: APAC\gnoctisvcldap01 Search Base: dc=apac,dc=nsroot,dc=net Search Filter: sAMAccountName={username} LDAP Servers: ['ldaps://apac.nsroot.net:3269'] User to DN Rule: APAC\{username} Role Mapping: ['admin:CN=app_apac_gno_pel_xio_adm,OU=App_Grps,OU=EG-PrivilegedGroups,OU=EntitlementGroups_GIDA,OU=GIDA,DC=apac,DC=nsroot,DC=net', 'configuration:CN=app_apac_gno_pel_xio_cfg,OU=App_Grps,OU=EG-PrivilegedGroups,OU=EntitlementGroups_GIDA,OU=GIDA,DC=apac,DC=nsroot,DC=net', 'read_only:CN=app_apac_gno_pel_xio_ro,OU=App_Grps,OU=EG-PrivilegedGroups,OU=EntitlementGroups_GIDA,OU=GIDA,DC=apac,DC=nsroot,DC=net'] Timeout: 1500 Credentials-Expiration (hours): 24 CA Cert File: None ############ MultiConfigPart END ############ MultiConfigPart show-syslog-notifier Enabled: True Targets: 169.185.236.20:514,169.173.44.198:514 ############ MultiConfigPart END ############ MultiConfigPart show-xms Name Index Xms-IP-Addr Xms-Mgmt-Ifc xms 1 163.36.108.202 eth0 ############ MultiConfigPart END